Replaced Hard Drive now another problem.

Today my friend replaced the hard drive on his iBook G4 933mhz as he feared it was dead after the machine wouldnt recognise it - very much like my G3 did a year ago - whilst doing so when he was taking the power button lead up from the logic board - due to the way it was deisgned it looks as if the whole thing has been taken up from the logic board, even after that he couldnt just remove the top connecting bit, he put it back in place but when he closed the machine up after replacing the drive it doesnt switch on.
Is ther any way of soldering this back onto the logic board? or is it now even more buggered than it was before?
Thanks

Scampdoodle,
There's a life lesson learned here,
Don't let friends work on your iBook unless they are certified. Bring it to your local Apple Store/Reseller or someplace like PowerBookRes.
No, I don't think you can solder it back on without causing more damage. Most documentation warns to be extremely careful when removing the top case because of the speaker and power wires. Those wires are fragile and can easily rupture, which causes problems (one of the reasons why certified technicians should do these things). You may be able to buy a wire from a place like eBay.
Good Luck,
Jon
PS Don't forget about places like PowerBookResQ;. They do iBook upgrades as well as troubleshooting.
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

Similar Messages

Replaced hard drive now what help

I =have the crt imac snow edition, I replaced hard drive all I get is a blue globe on start up, I have the software restore disc have placed it in nothing happens tried the holding down c key to start from the cd, Nothinh happens I have read numerous threads hoping to find the answer.

First of all, are you sure the CD you inserted is truely bootable and designed for your iMac (and not specific to another different Mac)?
Anyways to reset PRAM, while turning on your iMac, hold down Option + Cmd + P + R (I know, hard to do that 4 key combo).. and you should hear some "boing" sound, wait until you hear two "boings" then you can release and try to hold down 'C' again to boot your CD... I think that's how that works... someone can correct me or clarify if I'm not 100% correct....
ANdrew

Replaced hard drive now error

Hi all,
I replaced hard drive in my t61 series w wdscorpio sata320
gb, when i try and boot up i get this "initializing link, media test failure check cable; excluded from boot order ATA HDD2, ATAPI CD1? what does this mean?
Solved!
Go to Solution.

that means there is no OS (operating system) detected on the hdd. So you just need to install the Operating System.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Replace hard drive, now will not boot

Pavilion dv7-6b78us was running windows ultimate
Had to put a new hard drive the factory one died unexpectedly. Had a 700 gig I think. now have a 350 gig. replaced HD and proceeded to run all the test to make sure it was alright. When I tried to install windows I keep getting No bootable device -- insert boot disk and press any key. I have tried setting it to boot of the internal CD/DVD, didn't do any thing, tried booting of a flash drive copied the OS to the flash drive and set it to boot from Flash memory, still did nothing. Set it to boot from an external cd\dvd usb drive put a new copy of windows in the drive still nothing. Have been in roxio to make a boot disk and copied windows 7 again still nothing happened. I am a collage student and I need to get this thing up and running, any help would be greatly appreciated

Having same problem! I need help also!

Replaced Hard Drive now warranty is voided?!?

I had to replace my HDD on my MacBook Pro mid 2012. I had lost the original drive and needed to take it to the apple store. Before taking it to the apple store I figured I should see what they could do. After discussing what happened they are now saying my warrant is void for replacing the hard drive. However, I thought you still could up to 2012 models.

I think I am unclear on the details. When did you buy this computer? Was the computer still under warranty when you replaced the drive? What about now? You are now asking them to replace the drive you installed in the computer? I can undestand them balking at the idea of doing that. They do not feel an obligation to warranty anything that may have been affected by work you performed or parts you installed. I don't know how it works in your case with "user serviceable" components, but generally technicians are told to not work on something a user had handled. Apple doesn't want to be responsible for anything you have touched, even if you have been extremely careful. With present warranties you can't even touch a screw without voiding all warranty on a machine. In your case you have a few serviceable parts. Let's say you replaced the RAM but not the drive, then the drive went. As long as you hadn't touched the drive at any stage it would still be under warranty, but not the replaced RAM.
No, it isn't always easy to work with warranties as they are set up, but as you are asking them to cover things, so you have to play by their rules.

Replaced hard drive but still problems

I just got my hard drive replaced on my powerbook. However when I run some internet programs there is a loud winding noise, as if it was working very hard and then the display goes black. I press the On button and it turns back on. Does anyone know the problem?

Did you get it replaced from Apple? If so, take it back or send it back.
If you ordered it new from a reputable retailer/reseller, ask for an RMA and get a new one. You have a bad hard drive.
I replaced a failing hard drive in my "Pismo" PowerBook a few years ago due to a whining noise, and the NEW hard drive I got? Made knocking noises and later on, "popped" (the noise). I got a replacement right away.
Anyway, I could be wrong, but the winding noise sounds like a hard drive problem and the screen turning black suggests even more so, but the fact that it turns back on when you press the on button is an anomaly.
See if it sounds like any of these:
http://www.cybertechhelp.com/forums/showthread.php?t=120507

Replaced hard drive - now Intel Rapid Storage Tech screen comes up first?

A couple of weeks ago I replaced the hard drive in my Pavilion dm4-3090se laptop with a 240GB Samsung SSD (the laptop came with a 500GB hybrid hard drive that is now my backup).
Everything runs fine, except when I first turn it in I get the screen shown in the picture below and it takes a good 5 or 6 seconds before it closes it and opens Windows. How can I make this screen go away?
This question was solved.
View Solution.

Are you running Windows 7 or Windows 8? I see you still have the 32 gig mSATA acceleration cache drive installed and it has the Intel Rapid Storage acceleration partition on it, just disabled. Can you find the Intel Rapid Storage control panel and reformat the 32 gig accelerator drive? It will look something like this:
I can also suggest just physically removing the 32 gig acceleration disk drive. You don't really need it any more. You can't acclerate an SSD and would not need to do that anyway since having a main SSD is even faster than having the accelerator. See page 44 of the Manual:
Manual
If this is "the Answer" please click "Accept as Solution" to help others find it.

Replaced hard drive - now can not install an OS - any ideas?

That's right. The iMac was given to me and the "giver" did not give me any CDs etc. (very old iMac).
Anyway, the hard drive was bad, so I replaced it along with 512 of RAM.
I am unable to install any OS because all my OS X versions are upgrades. I just want to see if the thing will work worth anything with OS X before I keep it.
I bet I'm stuck aren't I?
D.

If UR looking for original Cd's - check out your local "quokka' mag - you know, the one that has all the for sale items - furniture, whitegoods, computers etc - here in Perth Australia we have teh 'Quokka'. Anyway,try all the 'imacs for sale' contacts until you find either someone who has original CD's for sale - this could be someone who gets bulk intakes of 2nd hand computers - PC and/or Mac - often they get shipmetns of @nd hand computers form schools and the original software Cd's as well- you could pick up a bargain?!
What colour is your iMac?? Apple has a chart to distinguish it's computer series on its info base - I think (hang on and I'll go find it for U) ...... ah, here it is - http://docs.info.apple.com/article.html?artnum=58669 - will help a little bit in differentiating between models.
Look, Mr Singitloud-in-the-shower, these G3 iMacs are great little beasts - I just love them - even at 55 - and today I've pulled my first one apart - but it's a scrap piece with the CDRW and HD already scavenged - but it's my learn-on machine - now I just need to find where on the web you can find reliable fix-it info so I can learn more repair ideas.
se ya
Gregg

Replaced hard drive - now I get kernel panic when I load installation disk

Hi all,
I just replaced a dead hard drive on my Powerbook G4. The Apple Hardware Test says everything is fine. When I put in the installation disk that came with my laptop (OS 10.2.3) and hold down the "C" key I just get the polite suggestion in several languages that I reboot--from surfing the boards I think this is called a Kernel Panic (?). If I don't hold down the C key the computer just crashes. It is possible that my installation disk is bad--was accidently stored in the attic for a couple of years and I only went to look for it after my hard drive died. However, the AHT disk was also stored up there and it worked just fine. I have the phone number for Apple to call about replacement disks, if no one thinks I've overlooked some other possible cause.
Thanks,
Lori

Lori:
I am glad you were able to boot from your co-worker's disk. As you noted, that isolates the issue as being a faulty install disk.
It looks like I'll be purchasing 10.4.
To install Tiger your computer will need to meet the minimum system requirements for Tiger.
You will need to purchase the Full Retail Version of Tiger. Tiger is no longer available at the Apple Store but is still available for $129 by calling Apple Phone Sales 1-800-692-7753.
You can find the Full Retail Version of Tiger, if you shop carefully, at online outlets like FastMac Retail $159; CDs $179, HardcoreMac Retail $199, CDs $249, AllMac Retail $149, CDs $179, etc. If you know what you are looking for, read all documentation carefully and ask questions of the seller, you may be able to get Tiger on eBay.
Please do post back with further questions or comments.
Cheers
cornelius

Replaced hard drive, now can't boot from install disc to restore backup

Yesterday, my hard drive died (disk warrior informed me, that HD had irrecoverable errors, and my iMac would shut down unless it was booted from the Disk Warriorr disc).
Today, I have a new internal HD professionally installed. And when I brought it home, and installed Snow I got an error at the end of the installation "OS could not be installed, restart or choose start up disk" or something to that effect. However, on licking OK I got the snow music, and welcome movie nd eerything seemed to be working fine.
I can log in normally and have get to my desktop, but on trying to boot from the Snow Leopard disk (10.6), I get to the gray screen with the apple logo and hang. I have tried resetting Pram/firmware and also ran the fdisk command (twice).
It seems too much of a concidence that my hard drive and now my disc drive would die all in span of two days? I can hear the disc noise, but as I mentioned I cant get beyond the gray screen on trying to boot from the disc.
Suggestions?
Late Nov '07 intel iMac. And I did update the OS to 10.6.4. Install disc is 10.4.

Return it to the repair station.

Replaced hard drive; now Macbook wont boot from CD (or USB for that matter)

Looking for a genius. I've tried holding down "C" during startup until the option to boot from CD shows up, but my install disk spins, then stops. Does this about 3 times and the Macbook spits it out (I held "C" the entire time). I've also tried holding "alt/option" key with an external drive attached via USB but the option to boot from there never came up either. I tool it into the Apple store earlier today and was told only the hard drive was bad. Now that I've bought, opened, and installed the new HD, I'm concerned I've wasted that purchase. Anyone? Thanks so much.

Startup your Mac while holding down the Option key. That should launch the Startup Manager window where you can select the startup disk then click Restart.
A flashing question mark appears when you start your Mac < includes info for repairing the startup disk
A Windows install disc will not boot your Mac.

C655: Physically replaced hard drive, NOW WHAT? Don't know the very next step.

Start of History: Received HDD failure message 2 weeks ago. Researched on here and discovered I would have to replace drive. Backed up computer with disks and it took 5 to get everything backed up and also made a "Repair disk Windows 7-64 bit". Purchased new drive and Upgraded memory (2ea X 4s=8) while I was in there. So, this morning I physically installed my new hard drive and memory. When I turned on the laptop, it asked for a boot disk. Couldn't remember if that was on the Repair disk, so I removed new hard drive, installed old drive and looked at Repair disk. It showed three boot "something" files. I reinstalled new drive and used the Repair disk to start computer. It did some "stuff" and then a pop up to choose "Toshiba Recovery Wizard" or "system recovery options". I have absolutely no clue which to use. Tried the SRO and it required me to select and search for "something" that lead me to believe it was just to repair the old drive. So, I cancelled and went back to the TRW. That lead to something asking me to install disks. The only disks I have are the back ups, so I tried them, but it read the 1st disk in about 3 seconds, then ejected it and asked me to "set the 1st disk". Don't even know what that means. "Set"? Whatever the case, I don't think I have the correct disks made from the old drive. End of History.
Currently have the old failing hard drive back in laptop till I get some answers. Hopefully before this thing dies for good. I purchased the laptop new and have the disks somewhere at home in Texas. I am on the air force base in Charleston and don't have immediate access to those disks and if I were home, it would take me a while to locate them. So let's assume they aren't availabe at this point. Here is what I need to know. Are there other disks that I need to create from my laptop? Which option should I be using TRWizard or SROptions? If TRWizard, what disks is it asking me to install? If someone is able and willing to educate me on each step regarding the software prior to removal of the hard drive and then the same baby steps at turning on the computer for the first time after physically installing new drive, that would be helpful. Constructive, "dumbed down", with crayola photos etc. I need step by step everything. Standing by and waiting for help...

Satellite C655-S5128 - More here.
See the section Creating recovery DVDs/media, which begins on p. 68, and the section Restoring from recovery DVDs/media, which begins on p. 71, of the User's Guide.
   Satellite C640/C650 Series User’s Guide
New hard drive is a Toshiba MK5059GSXP
That drive does use advanced-format technology.
   MKxx59GSXP Hard Disk Drive
We've had mixed results restoring to such drives. See my original post here.
Give it a try. At the first opportunity, install the new Intel storage driver. (I've read reports of its being installed from a thumb drive prior to completing the restore.)
   Intel Rapid Storage Technology
Best of luck!
-Jerry

Replaced Hard Drive, Now Password is Incorrect

I upgraded my hard drive from a 500 GB hard drive to a 1TB hard drive in my MacBook Pro, I reinstalled Lion and restored the data from the other hard drive. Now when I try to login to my account, it's as though my password is incorrect. I'm certain it's correct.
How do I use my Apple ID to reset my password?
How do I access my account?

This assumes you are booting up from a system disc...
"Mac OS X v10.6 or later: Choose Password Reset from the Utilities menu."
Here are a couple of other approaches...

IPod 4th Gen Click Wheel replaced hard drive; problems

Ok, So I replaced the 20gb hard drive with a new EXACT replacement hard drive, no other problems with iPod. But iTunes will not recognize it because the hard drive is not formatted. I tried formating it with Disk Utility but keep getting error messages. Im not sure what format to use. When the 4th gen came out Intel processors werent here so Im sure I need to simply format as Mac OS Extended. There is no HFS= format in Disk Utility. Im lost as to what to do. Please help??!

hmm - curiouser and curiouser
I've now managed to get it to manually update (after iTunes took 100% of system resources and I had to force quit it...) but that still doesn't really help me with the auto-sync feature which still won't work
aaaaaaggggggghhhhh

Copying a lot of music from one hard drive to another - replacing problems

Hi,
I want to copy a lot of music in many folders from my desktop to an external hard drive. The problem is that many of the folders share a name with a folder in my hard drive, but have different music files. If I tell Finder to 'replace' then all of the old files on the hard drive in that folder will be erased. I remember in Windows that when you told it to 'replace' like this it would just assimilate the old folder with the new one, and ADD the files, instead of removing some of them. Does anyone know of a way to do this?

Cindy Rosenbaum wrote:
Hi,
I want to copy a lot of music in many folders from my desktop to an external hard drive. The problem is that many of the folders share a name with a folder in my hard drive, but have different music files. If I tell Finder to 'replace' then all of the old files on the hard drive in that folder will be erased.
Just create a new folder on the HD for all the music that you are copying. Then there is no problem.
I remember in Windows that when you told it to 'replace' like this it would just assimilate the old folder with the new one, and ADD the files, instead of removing some of them. Does anyone know of a way to do this?
I do not believe Winders does such a thing. Replace in Winders overwrites the original file, just as in BSD.
You are really looking for a merge contents command such as in importing or synching email.
This link should be helpful
http://forums.macrumors.com/showthread.php?t=274241

Replaced Hard Drive now another problem.

Similar Messages

Maybe you are looking for