Replaced hard drive with no iPhoto or iMovie

the people at my apple store had to replace my hard drive on my macbook air because it crashed. i just recently noticed that i don't have iMovie or iPhoto. I was doing research on this and it said to go to my purchases in the app store and download it again but nothing shows up? please help because i don't have 30$ to spend to replace them

Apps are locked to the account that purchased them. Either get the password or purhases with your account.
Also not the 90 day window discussed here:
iTunes Store: Associating a device or computer to your Apple ID

Similar Messages

  • Does anyone use a LaCie external hard drive with their Mac using imovie '09?  I have some questions.

    Does anyone use a LaCie external hard drive with their Mac using imovie '09?  I have some questions.

    Are you actually having a problem with the new Lacie drive, or are you just asking is the Lacie drive somehow different from your old G-Drive?
    From a connection standpoint, most Lacie desktop drives have both USB and FireWire connections, just like the G-Drives do.  You would connect and use it the same as a G-Drive.
    Regarding capturing to the external HD, if you are using a camcorder that has FireWire (iLink) connection, it is not advisable to have an external FireWire HD connected to your Mac at the same time as your camcorder; there are often communication conflicts between the camcorder and the hard drive if they are connected at the same time.  The conflicts usually appear as either dropped frames or a complete freeze.   This is more common with Canon miniDV camcorders but I have also seen this behavior with Sony miniDV camcorders.  (The problem is the camcorder's FW implementation, not the hard drive.)  The workaround is to capture to your Mac's internal HD and later copy the captured video to your external HD.

  • G62-234DX replaced hard drive with new Samsung 250 GB. Same size as installed.

    G62-234DX  Hard drive dead.  I replaced hard drive with new Samsung 250 GB. SATA II hard drive and used the recovery Windows 7 Home edition DVD.  Error message appeared after windows loads files and starts windows from the recovery DVD.  An error dialog box opens after completing and indicates, This computer is not supported by the recovery discs.  You will not be able to continue to recover this system with these discs.  error: 0100-1425 -3627-3628-3623-3624.   Hit OK and system powers down. 

    Hi:
    If you purchased the recovery disks from HP, please see if making and running this first helps.
    "CyberLink Recovery Discs utility resolves an issue where Recovery Discs sent from HP do not work on a new hard drive."
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-80183-1&cc=us&dlc=en&lc=en

  • MacBook shows only folder with ?. Replaced hard drive with same results.

    In the midst of some work the machine simply clicked and showed a folder with a ?. Would not restart. Replaced the drive with a new 7200 Seagate momemtum, 320GB, installed the software, and have the same problem with startup. A folder with a ? Connect another machine via firewire and looked at the MacBook drive and it showed the appropriate system folders. Then started the other computer from the MacBooks hard drive and that worked. So the drive appears healthy but we cannot get it started on its own. In Disk Utility the new drive is indicated as not owner enabled, whatever that means. It appears most Macs that work are, in fact, owner enabled. Anybody have a clue what might be going on here? We're thinking maybe the first drive had not failed and the problem lies elsewhere.

    As an FYI, here is the apparent solution. The original drive did fail. Because the disks were in Seattle and we were attempting to fix it in Dallas we connected via Firewire to a PowerPC machine and formatted the drive. That was the crucial error. the G4 did not give the appropriate Intel-based Mac formatting options. So we could look at the drive from the G4 and see everything was there, but the MacBook could not boot itself because it could not read the disk which was improperly formatted. The Genius bar in Seattle figured this out and reformatted the disk at no cost.
    All's well that ends well, but have Macs really become that complicated?

  • Best way to replace hard drive with Time Machine

    Hello, I searched dozens of threads before posting but I didn't find my specific topic.
    I have a G5 (single CPU) with two internal hard drives plus one external drive. The original hard drive is only 80gb and it has been quite full for several years now. I purchased a second internal drive (150gb) about 3 or 4 years ago and have been storing all my files video and data files on the second drive. This created some additional space on the primary drive, but not much. I started off with OX 10.1 back in 2003 and have purchased the upgrades all the way to OX 10.5.4. I also have about 14000 photos in iPhoto that are stored on the primary drive because I can't figure out how to move my library to the second drive (where there is more space).
    About a year ago, I purchased an iomega 500gb external drive (USB 2.0) that runs Time Machine.
    I have not had any issues with any of the drives except for running out of space on the main drive. I accidentally deleted some of my wife's files once and used Time Machine as advertised.
    My main drive has 4.7gb free
    My second drive has 87gb free
    My Time Machine drive has 205gb free.
    I purchased a new 500gb internal drive.
    I think my G5 will only take 2 internal drives total, so the original 80gb drive needs to go. How do I accomplish this? Should I make my 150gb the main drive, since it will be the smallest and therefore maybe the fastest for running the OS? If size of the drive doesn't matter, then should I just remove the 80gb drive, install the new 500gb in it's place and then boot using the OS X10.5 disk?
    I suppose I could just let Time Machine restore the system, but do I really want OS X10.1 with a bunch of upgrades? It looks like my OS X 10.5 disk is a full version (it doesn't say 'upgrade only') on the box... Wouldn't my computer run better with a fresh OS X install and if so, is there a way to let Time Machine re-install my apps and user settings? I think I am running iLife 06 (which ever one has iMovieHD...) I also have Final Cut Express HD, CorelDraw suite and NeoOffice. Everything else is how the computer came back in 2003. I've never had any issues, so I am more than a little concerned that I am going to mess something up. You know that saying...."If it ain't broke....'
    Any advice?
    Regards

    You do indeed have only two internal drive slots in your G5. To avoid having to try restoring everything from your TM backup what you could do is to be sure you force a final TM backup of the 80 GB drive before removing it. Install the new drive. Prepare the new drive - I suggest the following:
    Extended Hard Drive Preparation
    1. Boot from your Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Upon completion of formatting quit DU and return to the installer. Now complete your installation of OS X. During this process you will be asked if you want to do a full restore from a TM backup. Skip this option. Once the installation has completed the computer will restart. After restarting you will see the Setup Assistant. When you've completed the Setup Assistant you will be given the option to migrate from a connected TM backup drive. Select this option. You can then migrate your Home folder, applications, and preferences. There is only one important caveat to this. When completing the setup you are asked to provide a username and password for the startup admin account. Do not use the same username as the Home folder you will migrate. Select a different username (short name is what it is also called.)
    Once the migration has completed you can log out of the startup admin account and log into the migrated account. You can then delete the startup account unless you choose to keep it around for test purposes.
    This process will not restore anything else from your backup except the Home folder, applications, and preferences. If there are items in your Home folder you would prefer not to migrate, then move them to the other hard drive.

  • Replaced hard drive and now iPhoto won't recognize camera

    I have been using iPhoto 4.0 with my Nikon Coolpix 775 for years with great success. My hard drive needed replacing and I have lost so, so much. Now iPhoto won't recognize my camera, and I can't import. Also, it won't import the hundreds of photos I had backed up on my external drive. "Don't contain valid information" or whatever that message is. I just got a download of Nikon View 6.2.1 on the manuf. website, but that didn't seem to help. What setting am I supposed to change?
    iMac G4   Mac OS X (10.3.8)   iPhoto 4.0.3

    Sounds like you're describing two problems...
    1. iPhoto won't recognize my camera, and I can't import -- Open iPhoto Help and search on the word "camera". Seems like about the fourth item returned to tell you how to have iPhoto open when you connect your camera. If you have not imported any pictures to this library yet, then solve problem 2 before tackling this issue (so you don't have to contend with combining two photo libraries).
    2. it won't import the hundreds of photos I had backed up on my external drive -- most likely cause is that the external drive is not formatted as a "Mac OS Extended" drive. If you backed up by copying the iPhoto Library folder in its entirety, you might try just dragging it back into your Pictures folder (you may need to rename the existing iPhoto Library first if there's one already there with pictures you treasure). After the move, try starting iPhoto and see if it opens to the photos you had backed up.
    If that doesn't work, come back and we'll go to plan "B".

  • Replaced hard drive/ with new install, bad modification dates

    Does anyone know how to get rid of bad modification dates that appeared when system (10.3.9) was re-installed after replacement of hard drive on powerbook?
    Tech Tools Pro didn't fix it.
    The dates for Sherlock, Text Edit, DVD player, ical,isync (even explorer) all say April 1, 1976. That's April Fool's Day and I was 30 years younger, but .... Any ideas?
    Sharon

    Sharon Chard-Yaron...
    Something is odd here as a few weeks ago I was forced into a reformat and a reinstall of my Mac OS.
    I reformatted / partitioned / installed Mac OS 10.3.5(+) first, as it is where my Panther CD set starts from. However it prompted me to confirm that my dates was corrected before continuing with the install. It seemed rather serious that unpredictable results could happen if those dates was wrong.
    (+)(Later of course, I did update to 10.3.9 from my backup of download goodies and Software Update panel.)
    Anyway, my time and dates was messed up and I reset them from within that install.
    Now- did you get any time/date prompt during the install like I did?
    Mac OS 10 installs so many files that I feel it could be a disaster waiting for a time/date to happen on. Unless there is some gifted fix utility that I am not aware of, nothing short to re-doing everything would clear my conscience to a bug free install.
    ...Ron

  • Replaced Hard drive with unsupported brand

    Hello and thanks in advance for any one's input.  I haves done some searching and found topics related to my question, but not exactly.  I replaced the 40GB hard drive in my ThinkPad T43 and replaced it with a 250GB Western Digital Scorpio.  I imaged the old drive to the new one and I am able to boot successfully and I am encountering no problems so far.  (It has only been several hours)  All I experience is the error at boot pertaining to my hard drive "may not be compatible" with the system.
    I tried the hard drive firmware boot cd, but no firmware updates were available.  (This is also when I realized that ThinkPads have "certain" types of supported hard drives.)
    Basically I want to know what kind of problems I can expect to run into (if any) by using an unsupported hard drive.  Could my drive be compatible and the system thinks it isn't?
    Any advice would be helpful.  Thanks.  =]
    Solved!
    Go to Solution.

    Deedlbug wrote:
    Hello and thanks in advance for any one's input.  I haves done some searching and found topics related to my question, but not exactly.  I replaced the 40GB hard drive in my ThinkPad T43 and replaced it with a 250GB Western Digital Scorpio.  I imaged the old drive to the new one and I am able to boot successfully and I am encountering no problems so far.  (It has only been several hours)  All I experience is the error at boot pertaining to my hard drive "may not be compatible" with the system.
    I tried the hard drive firmware boot cd, but no firmware updates were available.  (This is also when I realized that ThinkPads have "certain" types of supported hard drives.)
    Basically I want to know what kind of problems I can expect to run into (if any) by using an unsupported hard drive.  Could my drive be compatible and the system thinks it isn't?
    Any advice would be helpful.  Thanks.  =]
    Hi Deedlbug,
    what specific 250GB Western Digital Scorpio hard drive did you get?  I just did a search and I see several of them. 
    Is it the WD2500BEVS?
       I recently bought a refurbished T43 (1871-FU1) for my little daughter, that came with 40GB.  I'd like to upgrade the hard drive. 
    Thanks very much

  • Can I replace hard drive with Time Machine backup?

    I couldn't phrase this right to see if some already asked. I have MacBook with a 250gb HDD and I have a new 500gb HDD. I bought a USB Hard Drive enclosure and have been backing up with Time Machine. So my question is, can I take out my 250gb HDD and put in my Time Machine Backed Up 500gb, and boot up like normal? Or are there some steps I need to do?

    No, you cannot do what you've asked.
    What you can do is this.
    1) using your install DVDs or an install USB, install OSX on the external 500GB drive.   When setup assistant starts, point it to your 250GB drive so all your settings and files get migrated over.
    2) now you can swap drives and it should work.  Have your install USB handy incase something goes wrong.  Put the 250GB drive in your external enclosure so you can access it if needed for a reinstall.
    good luck

  • Replaced hard drive, can't download earlier iMovie version

    My original HD crashed.
    I was abble to save the files and apps of that HD, but the app store purchased apps won't work on the new HD.
    Now I can't download iMovie or other 10.7 apps since I run 10.6.8.... I am not buying Mountain Lion since I have a 2006 MacBook Pro.
    Suggestions?

    I was abble to save the files and apps of that HD, but the app store purchased apps won't work on the new HD
    No guarantees but try this...
    Launch iTunes. From the iTunes menu bar top of your screen click Store > Authorize This Computer
    Quit iTunes.
    See if that made a difference...

  • I replaced hard drive then used recovery disks , but not working

    i replaced hard drive with new one then used recovery disks , but  its not working.  laptop HP g62 64 bit with W7

    Hi
    Please boot unit to Bios using F10 key once unit is powered on go to Diagnostics check if the Hard Drive is getting detected. If not getting detected reseat the HDD & check if not issue with HDD & Solt of HDD.
    If the HDD is getting detected under Bios please run the HDD test check if that passed.
    Then under system configaration change the Boot order to CD/DVD to be First.
    Insert the CD restart the unit or press Esc Button unit should detect the RCD in drive and give you the recovery option still does not work issue with DVD/HDD.
    Let us know how it goes!
    *Although I am an HP employee, I am speaking for myself and not for HP.
    *Did my response help with your issue? If so, please give me Kudos by clicking the "Kudos" button. Thanks!
    Regards
    Manjunath
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Replaced hard drive and iTunes does not recognize my laptop

    My 2011 MacBook Pro froze up and when I rebooted the folder error came up.  Replaced hard drive with a SSD drive and my new OS has a new name.  When I logged into ITunes I had to delete an account due to my limit being reached.  My old Mac ID was showing and it was signed up for the cloud at a fee of $24.00.  The same MacBook but with a new hard drive had a new ID and I can not restore any of my pics or ITunes music.  Am I missing a step or can I rename my Mac so it will match my old ID?  If I rename it can I download my old info off of ITunes?? Thanks

    I'm not following much of the question and for me it would help to get some terms straight. You only "log into" the iTunes Store (online).  What account was this and what limit??
    Old Mac ID?  Your AppleID is what you use to log into the store. It does not change with computers.  You always use the same one, perhaps updating the email address from time to time.
    By the cloud do you mean iTunes Match?
    Sure, your computer hard drive has a new name (you can rename it -- my series of drives have kept the same name for 23 years now).  That doesn't affect logging into the Store. Start up iTunes, log into the Store using your same Apple ID, download available past purchases, and if you have the Match service download your other music too.   You may have to authorize the computer again.  I don't know which part of the computer is used for authentication and if that got lost with the old drive.

  • I replaced my hard drive and lost iPhoto. Is there a way to retrieve?  I can not find the starter discs that came with my Macbook Pro.

    I replaced my hard drive and lost iPhoto. Is there a way to retrieve?  I can not find the starter discs that came with my Macbook Pro.

    Customer Service: Contacting Apple for support and service - this includes international calling numbers. You can purchase replacement discs from Apple.
    Or, you can upgrade to Lion or Mountain Lion:
    Upgrading from Snow Leopard to Lion or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
    If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
    A. Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.
    B. Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

    After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

    The best thing to do would be to start over. Use Setup Assistant this time.
    Boot into Recovery, launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume. Quit Disk Utility and install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
    When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
    Using Setup Assistant
    Don't transfer the Guest account, if it was enabled on the old system.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

  • MacBook hard drive is full again. Replaced original hard drive with a Samsung SSD 840 Pro Series 256GB hard drive about 18 mo. ago, but my MacBook is now already saying that my hard drive is full again.  13in. Alum. Late 2008 MacBook

    My MacBook hard drive is full again. I have a 13in. Aluminum, Late 2008 MacBook, and about 18 months ago (in October 2013), I replaced the original hard drive with a Samsung SSD 840 Pro Series 256GB hard drive. However, my MacBook is now already saying that my hard drive is full again.  When I check "System Information," under "Storage," it states the following:  Audio 52.02 GB; Movies 33.68GB; Photos 43.13GB; Apps 14.76 GB; Backups 174.4 MB; and Other 96.39GB.
    Also, at home, I have an Apple Time Capsule 4th Generation 2TB that I use as my wireless router, and I also use it for automatic backup via Time Machine.  And when I first purchased Time Capsule, the first time I connected Time Capsule, Time Machine asked if I would like to use it to back up my files, and I clicked, "Use as Backup Disk."  And that's really all I've ever done with Time Capsule.
    In addition, I also have a LaCie Porsche Design P'9223 1TB external hard drive.  I have copied my MacBook's hard drive onto my LaCie external hard drive.
    Does anyone have any suggestions?  Obviously the Audio, Movies, Photos, and Apps are taking up a lot of space... Any suggestions re: what I can do with Audio, Movies, Photos, and Apps?  And what about the Other?  Other is taking up 96.39 GB. What is Other, and what can I do about it? 
    And what about partitioning my hard drive... Is that something I should do?  Should I partition, or configure, my MacBook's internal hard drive differently?  And should I partition, or configure, my external hard drive?  And if I need to partition, or configure, my MacBook's internal hard drive differently, how do I setup Time Machine to backup per any such changes?  Same thing for my external hard drive?   
    13in. Aluminum, Late 2008 MacBook, 250 GB (with upgraded Samsung SSD 840 Pro Series 256GB hard drive)
    Processor 2.4 GHz Intel Core 2 Duo
    Memory 2 GB 1067 MHz DDR3
    OS X 10.9.5
    plus
    Apple Time Capsule 4th Generation 2TB
    LaCie Porsche Design P'9223 1TB external hard drive
    Thank you for your help.

    Partitioning makes no sense. You have a drawer full of stuff. Split it into two smaller drawers and you have two smaller drawers full of stuff.
    Decide what you can store on external storage - your iPhoto/Aperture/Lightroom libraries can all be stored on externals, as can your iTunes Libraries and so on. Do you need to carry 30 gigs of movies with you all the time? You  can get portable drives the size of an iPhone these days.

Maybe you are looking for