Replaced HD. Getting disk full message and request to Force Quit programs

After having the HD replaced at a reputable shop, the computer bogs down with the spinning circle/rainbow.  The Force Quit pops up and asks to close some programs with some disk full errors. 

You really need a bit more space than that, but try a bit of maintanance:
Repairing permissions is important, and should always be carried out both before and after any software installation or update.
Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
In First Aid, click on Repair Permissions.
This only takes a minute or two in Tiger, but much longer in Leopard.
Background information here:
http://docs.info.apple.com/article.html?artnum=25751
and here:
http://docs.info.apple.com/article.html?artnum=302672
An article on troubleshooting Permissions can be found here:
http://support.apple.com/kb/HT2963
By the way, you can ignore any messages about SUID or ACL file permissions, as explained here:
http://support.apple.com/kb/TS1448?viewlocale=en_US
If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
Once that is complete reboot again from your usual start-up disk.

Similar Messages

  • I want to delete my mac account and replace it with my gmail account. I know how to do this but when I click and open up mail I get the spinning wheel and have to force quit mail.

    I want to disable my mac.com mail, I know how to delete it but I cannot get into mail to do this, whenever I click on mail, or mail in system preferences to open it I get the spinning wheel and have to force quit. I am running a Macbook 10.7.5
    Thanks,
    Edward.

    You can't merge Apple IDs.  You also can't cancel (delete) and existing ID, you can only choose to stop using it.
    If your old ID was compromised and you can no longer access it, you'll have to contact Apple for assistance.  Go to https://expresslane.apple.com ; click 'See all products and services' at the bottom of the page. In the next page click 'More Products and Services, then 'Apple ID'. In the next page select 'Other Apple ID Topics' then then 'Apple ID account Security’.

  • Upon start up I get a start up disk full message and to delete files, now I only get a a blue screen on start up. How to I get past the blue screen and how do I delete files?

    Upon start up I get a "start up disk full message, delete files". Now on startup I only get a blue screen. How do I get past the blue screen and how do I delete files.

    That;s really not enough free space... you can use a tools such as OmniDiskSweeper to find out where your large files reside and begin pruning (or copying to an external if they're files that you want to keep).
    One thing is certain - if you're going to continue your current usage you're certainly going to need to install a larger boot drive.
    Clinton

  • HT5395 When launching iMessage, I get an internal error message and it automatically force quits...what does that mean?

    when trying to launch iMessage upon turing my computer on, I get the message "internal error has occured, please quit iMessage and try again."
    What do I need to do to repair this problem?
    Marvin Jones

    Hi Eric,
    Side note.
    com.apple.iChat.StatusMessages.plist  only holds the default and Saved Status Messages.
    Deleting it does not effect the running of the app.
    Deleting com.apple.ichat.plist first can be the most invasive as you have to reset any Preferences (and some Menu items) that you have changed from defaults
    If the person only has an iMessages account deleting the com.apple.imservice.imessages.plist  (holds the iMessages ID in Mountain Lion) maybe enough
    The account info is held elsewhere  but this is read by com.apple.IMAgent.plist to login.
    Next try the com.apple.imagent.pist one
    As above All the accounts info is held elsewhere but this one is actually handling the logins.
    It is of course doing all of then in Messages and FaceTime so it is not a first choice.
    Deleting com.apple.imessage.bag.plist can be useful as this has  info on the Server your version of Messages is using.
    I would delete this along with com.apple.imservice.imessages.plist on a second attempt.
    Hope you don't mind me adding the info.
    10:00 pm      Wednesday; March 5, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • I keep getting "Mail Not Responding" and have to force quit

    I can't even get to "Mail Doctor" because the spinning beachball starts up instantly.  I have to force quit to get it to stop.  Mail is working on all my other eight devices but not my primary iMac.  What the heck?

    What OS version are you running? If 10.8/9 try the below.
    Do a backup.
    Quit Mail.
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Go to Library/Containers/com.apple.mail.  Move the folder com.apple.mail to your desktop. You must move the entire folder, not just the contents.
    Re-launch Mail and test. If the problem is solved, recreate any required Mail settings and import any emails you want to save from the folder on the desktop. You can then put the folder in the Trash. If the problem remains, return the folder to where you got it replacing the one that is there. 
    Information learned from Linc Davis. Thanks to leonie for some information contained in this.

  • Capacity available but still getting start up disk full message

    Hi
    I got the start up disk full message a few days ago. I did command i and ran Omnisweeper and deleted all the large files. I now have over 50% available capacity but my Mac is still running on slow and I still get the start up disk full message....and request to force quit.
    Any thoughts on what I can do. Run idefrag?
    Many thanks
    Claire

    We never asked for the serial number.  I've asked it be removed.  It is a link to your personal information which others can use to search about you.
    Remove McAfee.  It is only necessary if you run Windows.
    Early 2008 models were not Intel CoreDuos. They might a have been Core2Duo, but not CoreDuo.
    Your model if the serial number is correct, which I verified with:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    is indeed a Core2Duo Early 2008 model by serial number.
    Go to Apple menu -> About This Mac to verify you have a Core2Duo and not a CoreDuo, otherwise you are getting your serial number and processor information from two sources that got wrongly combined.
    An Early 2008 model can upgrade to Mavericks and Mountain Lion.   It can also install any version of Snow Leopard that is retail, and not system specific with a Mac model name on it.  So your issue with file space is likely due to something else you installed.     Not a virus per say, but probably something that eats up a lot of temporary space. I would run the machine overnight in screen saver, not energy saver model to ensure the logfiles get properly cleaned up.  I'd temporarily turn off any backup software.   And the next time you shut down, make sure not to leave any applications open, by checking command-tab that the Finder is the only open application before shutting down or restarting.

  • Startup Disk Full Message Keeps Occuring

    I'm new at maintaining our Xserve here at work. It seems that each day the serevr gets incapacitated because the Startup Disk space fills up. I keep deleting log files and other files that are temporary, but to no avail. I can free a Gig or 2 then a day or two alter it's full again. Is there something wrong with the configuration?

    You found a disk-full message and, well, piled onto the thread. OK. There's a decent shot that there is no connection to the previous disk-full error, too. If you lift the hood and look at the Unix layers, there are a large number of files being written, and many differing triggers for general or for excessive disk consumption.
    As was mentioned earlier in the thread, this likely isn't specific to Xserve hardware, and this is probably a generic Mac OS X or Mac OS X Server issue, too; something occurring within the Unix layer of the platform. Something writing a log. Caching. A run-away process. Etc.
    Get the [Grand Perspective tool|http://grandperspectiv.sourceforge.net> as a start. That can show you where your space is going.
    Also launch Terminal.app and use the shell commands:
    find / -size 1k -print+
    sudo du -sHh /*
    mdfind 'kMDItemFSSize > 10000000'
    The first shows files larger than 1K, the second shows disk space. There are commands around to sort this stuff, too; to rank your use as output by du. That last one, the mdfind command, is a (fast) Mac search command that works reasonably well as part of a pipe.
    And 150 gigabytes? That's comparatively tiny. I'm running 750 GB drives on servers that are now three years old. Go get yourself actual disk storage devices. Smaller drives can sometimes be used for high performance, but SSD is infiltrating that usage. The tiny SAS disks that were sold with various Xserve boxes were built for speed and bandwidth (as HDDs go), and aren't so good for storage or for sharing the operating system installation with, for instance, users.
    And if it's log files, have a look at what's going on as - as is typical with many of these cases - the log can be filling because there's an error somewhere. And the specific trigger for the error can by most anything. Do your due diligence as a Unix server administrator and find your big file(s) and have a look at what's going on with your Unix server, in other words.
    Also try a few Google searches, as this problem is a common one, and there are any number of discussions around of various find and du and mdfind and other commands that can be used here. It'd be nice if there was an integrated and GUI-friendly mechanism within Mac OS X, but that's not available; it's add-on or Unix shell commands for now...

  • I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box.  But hours later, I am still getting a disk full error and all of the memory has disappeared.

    I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box.  But hours later, I am still getting a disk full error and all of the memory has disappeared.  I have cleared my backup logs from Time Machine, checked the mail folder, cleaned out tons of photos and videos and it still keeps filling back up.
    In checking the log files, here is the message repeated over and over....
    Jul  4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: CoreData: error: (21) I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache.  SQLite error code:21, 'unable to open database file'
    Jul  4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: Core Data: annotation: -executeRequest: encountered exception = I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache.  SQLite error code:21, 'unable to open database file' with userInfo = {
                  NSFilePath = "/Users/donjr/Library/Calendars/Calendar Cache";
                  NSSQLiteErrorDomain = 21;
    Jul  4 07:18:14 Donald-Keele-Jrs-iMac-123.local cfprefsd[180]: CFPreferences: error creating file /Users/donjr/Library/Preferences/com.apple.iPhoto.plist.t3l894p: 28
    Jul  4 07:18:30 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
    Jul  4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: [0x16697c0] |ISyncSession|Warning| com.microsoft.Entourage2008: transitioning to cancel - session cancelled by server: Client 'com.microsoft.Entourage2008' tried to start a session for the plan 45AD80C3-0D52-4CF2-8CBA-103564B6C47C and the plan no longer exists.
    Jul  4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Applications/Microsoft Office 2008/Office/Microsoft Sync Services.app/Contents/Resources/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
    Jul  4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Users/donjr/Library/Sync Services/Schemas/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
    Jul  4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
    Jul  4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: macx_swapoff SUCCESS
    Jul  4 07:19:31 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
    Any ideas on what to do next?
    I'm running and iMac 20-inch  early 2009
    Processor  2.66 GHz Intel Core 2 Duo
    Memory  8 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce 9400 256 MB
    Software  OS X 10.8.4 (12E55)

    Step 1
    Quit Calendar. Triple-click the line below to select it:
    ~/Library/Calendars/Calendar Cache
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu. A Finder window should open with a file named "Calendar Cache" selected.
    Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
    Step 2
    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash as well:
    iPhoto ▹ Empty Trash
    Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    Install ODS in the Applications folder as usual. Quit it if it's running.
    Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with ODS, quit it and also quit Terminal.

  • I keep getting "startup disk full" message even when I already moved all my files/documents to an external hard disk

    Dear all,
    What should I do? I keep getting the "startup disk full" message even when I already moved all my files and documents to an external hard disk.
    Thanks a heap.

    For information about the Other category in the Storage display, see this support article.
    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
    iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    If you're using Time Machine to back up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install ODS in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning your files.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with ODS, quit it and also quit Terminal.

  • My startup disk is full?!?!  This has been happening for a while and I have dumped 4500 jepegs from iPhoto onto an external drive to try and free up space.  I am still recieving the "Startup disk full" message.  What more can I do?!?!

    My startup disk is full?!?!  This has been happening for a while and I have dumped 4500 jepegs from iPhoto onto an external drive to try and free up space.  I am still recieving the "Startup disk full" message.  What more can I do?!?!

    Did you empty the Trash?
    What size hard drive & how much free space. You should always have a minimum of 10-15% or more free space?
     Cheers, Tom

  • 'Disk full' message even though 14gb is shown as available by Finder

    I've started to receive a 'Disk full' message when every indication shows that I still have over 10GB of hard drive space available.  The bar at the bottom of the Finder window, the 'Get Info' screen, and Disk Inventory X all show that my space usage is about 10GB under the size of my available disk space.
    The problem is not limited to an error message - web browsers will also sometimes refuse to download now because of 'disk full' issues.  But if I try to copy files within Finder, it always works, up to the actual limit of the disk size.   This suggests that something is going on with file management where both MacOS and my web browsers see that there is no space, but Finder is able to manage around it when I try to copy files.  Is this a known issue?   Are there large temporary files which are not reflected in the available disk space indicators?
    I'm using an early 2011 MBP with 10.6.8, and the original 500gb hard drive.  I did just upgrade to 8GB of RAM but it's not clear if this is related or a coincidence.

    You are Confusing RAM = Memory.. with Disc Space = Hard Drive...
    ZeroZeroZeroOne wrote:
    I've started to receive a 'Disk full' message when every indication shows that I still have over 10GB of hard drive space available.  ...
    This is Not enough Free Space on your Hard Drive... You need at Least 10% or 25 GB (whichever is greater) for your Mac to Perform as expected...
    Time to Clear Up some Space on your Hard Drive before it Freezes and becomes unusable...
    See Here for starters...
    http://macmost.com/what-to-do-when-your-hard-drive-is-full.html

  • What does "Disk Full" message mean when trying to send mail?

    I have recently been getting an error message when trying to send email using Entourage - "cannot send mail using this account, disk full". Quiting all applications makes no difference, get the same message. To send email again I have to restart the computer. Then everything is fine until the next time, maybe a couple of days or weeks later.
    Any idea what the "disk" referred to in the message is? I have plenty of RAM (640 megs) and as I said earlier, even if I quit all open apps after getting the "disk full" message it makes no difference.
    Thanks for any suggestions!
    G3 Blueberry   Mac OS X (10.2.x)   Upgraded processor to 1000mz G4, OS 10.2.8

    Hello! Usually the disk full message occurs because the hard drive is at or near capacity. The message has nothing to do with apps except for the "virtual memory or paging" aspect of OSX. Restarting probably clears out the paging file and possibly some other stuff which allows you to work for a while. Select the hard drive and do a "get info" on it to see hoe much space is available on the hard drive. FREE space should be 10-20% and anything less than 10% will likely crash the computer or choke it to a slow crawl. Tom

  • ITunes, iPhone startup disk full messages

    Since I got my iPhone 3G 2 weeks ago I have started getting "Startup Disk Full" messages. I then noticed that if iTunes is running, not downloading anything or searching for anything my remaining drive space starts to reduce until the messages. If I reboot this will give me back anywhere from 1 GB to 3 GB of drive space. I used to go for months without rebooting now I can't go a day. What would cause this? iTunes 8.0.2, OSX 10.5.5, iPhone OS2.2, Powerbook G4 1Ghz, 160GB drive, 1GB ram.

    open up iTunes to see what is taking up the space.. is it applications/Media/Photos and delete appropriately. If not then you might have just hit a bug or installed some bad application.

  • Start up disk full message but has 40GB available

    I'm getting the Startup disk full message so I checked the HD, it's 80GB, when I click 'Get Info' the available disk space changes frequently from 45GB available to 0 available. I deleted the trash and I know the disk is not full and has around 40GB available. I'm not sure why the HD available space changes often. Any idea??
    Thanks.

    Assuming you have no CD in the drive, this does not sound good. Before doing anything further, I would highly recommend to remove the hard drive, set it in an external housing and see whether you can rescue your data when connecting theis HD to a different MAC.
    Did you have FileFault turned on?

  • I am getting disc full messages on my Mac, unable to empty trash because not enough space, how do I proceed or do I need to increase my 4gig of memory

    I am getting disc full messages on my Mac, unable to empty trash because not enough space, how do I proceed or do I need to increase my 4gig of memory in which case how do I go about this process.

    You are confusing RAM (Random Access Memory) with hard drive data storage space.
    Your hard drive storage is getting too full if you can't empty your Mac's main trash.
    Here are some general tips to keep your Mac's hard drive trim and slim as possible
    You should never, EVER let a conputer hard drive get completely full, EVER
    With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
    If it does, it's time for some hard drive housecleaning.
    Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
    Have you emptied your Mac's Trash icon in the Dock?
    ( as you mentioned, you can't empty this as your hard drive is too full.)
    If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
    If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
    If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
    Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
    Look through your other Mailboxes and other Mail categories to see If there is other mail you can archive and/or delete.
    STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
    Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
    Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
    Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
    To find other large files, download an app called Omni Disk Sweeper.
    Download an app called OnyX for your version of OS X.
    When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
    Typically, iTunes and iPhoto libraries are the biggest users of HD space.
    move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
    If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
    Good Luck!

Maybe you are looking for

  • Address Book, Bluetooth, text backup

    Address Book is working well with my Sony Ericsson - so far, so good - now I'd like to move the old SMSs from my phone onto my Mac to free up SIM memory and keep an archive. Anyone know how to do this? thanks, dg

  • How do I move mail from MacMini running Leopard to MacBook Air on Lion?

    I've just started using Lion on a MacBook Air and I'm having a problem transferring Mail from my MacMini running Leopard to the MacBook running Lion. I used to just move the "Mail" and "Mail Downloads" folders from the Library of one computer to the

  • Replacing my iMac 1TB Seagate Hard Drive

    I have to replace my iMac 1TB Seagate Hard Drive. I need to use Time Machine to restore my Mac- anyone have a step by step procedure to complete this?

  • AVCHD files

    Can Final Cut Express import AVCHD or or MTS files to transcode into HD quicktimes? I've tried "log and transfer" and "import"....but when I go to my raw avchd files they just stayed grayed-out. Can anyone help? Thanks

  • FSCM-DM: Removing invoices from dispute case

    Hi all, I'm trying to remove an invoice from an Dispute Case but i'm receiving the error message UDM_MSG015 ("You cannot change this system node manually"). Is it possible to remove an invoice from an Dispute Case ? Best Regards, Bruno Sousa