Replaced zd8000 motherboard and need some troubleshooting help please............

Hello All,
I just replaced the motherboard on our HP zd8000 (pentium 4, 3.0ghz, 2gb ram, Win XP) with a used but tested good MB and need some help with the following.
1) I now cannot play DVD movies as the error no "dvd decoder" present which was not an issue before? Where can I go to get a free decoder that will work, as Windows only shows paid versions? We have the dvd burner/reader with lightscribe. SOLVED! CNET HAD DECODER.
2) The internal temperature, according to SpeedFan, is running around 140 degrees with just some Internet browsing. Is that a normal temperature because I only have one of three fans running on the laptop? Is there anyway of making all three fans run to be sure there are no issues? I am positive I hooked up everything but again only one fan seems to be running?
3) I discovered some of the pins were damaged in the card reader. I may get the Seller to give me a discount, no intention of tearing it apart simply for that, but is there any concern of short or otherwise?
4) Our battery stopped charging years ago, these were notorious for such, but I purchased a new one last year and hoped the replacement MB would allow charging again. No such luck though. Is there anything I can do, BIOS update etc, to make the battery charge?
5) Anything you folks can think of for me to test to insure the new motherboard is working properly?
Thanks, Ralph
P.S. This was a correct replacement board according to MB serial numbers. Everything else seems to be functioning properly other than mentioned. Our graphics went out on the original MB.
This question was solved.
View Solution.

Some of the wires had pushed out of the harness that connected the other two fans. I double checked and re-attached those so now the laptop is running quite a bit cooler.
EVERYTHING IS GOOD TO GO!

Similar Messages

New to the game and need some quick help

I have been thrown our exisiting phone infrastructure and what do you know we are having some issues.
We have a new series of DID's and when they are dialed from our directory they go anywhere? Not routing to the proper extension. Translation pattern looks good in comparison to the extensions that are working.
Cisco Unified CM Administration System version: 6.1.3.3000-1
Cisco Application Administration - 5.0(2)_Build064
Package: Unified CCX Enhanced
Regards,
Dan

First thing to know is that everything that has a DN can be used for routing, so it's a good idea to look at the route plan report to find matches.
If you can't find an exact match, chances are you're hitting something with wildcards ie X, [1-2], etc
An easy way to check routing if you're new to the game is to use DNA
Cisco Unified Communications Manager Dialed Number Analyzer Guide, Release 6.1(1)
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/dna/6_1_1/bw-dna.html
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

I need some photoshop help, please?

i am trying to make a .gif, but when ever i go to "File --> Import --> Video Frames to Layers" and select the video, the little video box thing is blank
( see screenshot here:http://i53.tinypic.com/vdi877.jpg ) and yes, the video is in one of the acceptable formats. can you help me please?
oh yea, and i have Vista (in case that matters)

OK, "AVI" is but a container - a "wrapper," if you will. An AVI can contain almost anything, and much of it cannot be used by Photoshop. See this ARTICLE for much more background. There are tips in that article on "peeking inside" the wrapper. Please let us know what is inside those files, and someone can likely help you.
Good luck,
Hunt

I'm a newbie and need some basic help...

I'm a newb trying to teach myself Director. I'm trying to
make a menu and I'm having some problems....
I have 3 main buttons. When you click one of the main
buttons, 3 sub buttons pop up next to the button pressed. When one
of those sub buttons is pressed, a box pops up to the right of the
sub buttons and has a list inside containing links to movies. When
one of the links is pressed i want the movie to take the place of
the links in the box. When the movie is done playing it will
disappear and show the links again.
I uploaded what I have done here...
http://www.lohrmandesign.com/uploads/Template.dir
If you look at it, could you tell me what I've done
correctly, and how I should go about implementing the rest of the
menu? I imagine you have to use director movies within the main
director movie, but I haven't figured out how to implement that. Or
possibly use the .visible command? Thanks for any help...Online
resources and examples are scarce for Director it seems.
And I'm not sure if i have to upload all the pics for you to
view my movie correctly, If I do, just let me know...

quote:
Originally posted by:
Newsgroup User
I haven't looked at your Director file, but what you want to
do sounds
pretty simple. First of all, though, can you clarify what you
mean by
"movie," because Director's terminology makes it kind of
confusing. Are
you speaking of a Director movie, or digital video?
If you want to jump to a different Director movie, simply do
something
like this:
on mouseUp me
go to frame "StartMovie" of movie "Option1"
end
To get back to your menu, just use an exitFrame command at
the end of
the Director movie that takes you back there.
If you're referring to starting a digital video, just put
your video
somewhere in the same Director file your menu is in, label it
with a
marker, and simply jump to that marker. Like this:
on mouseUp me
go to frame "Video1"
end
To get back to your menu at the end of the video do something
like this:
on exitFrame me
if sprite(5).movieRate = 1 then
go to the frame
else
go to frame "Menu"
end if
end
Hope that helps.
Sorry, I should have clarified...When you click on a sub
category button, a Quicktime video will play, not a Director
"movie"...Thanks for the help! using the method you described, that
would make the menu disappear when the video is played, and reload
the menu when the movie is done, right? I want the menu to stay
visible while the movie is playing...

TS1398 I have tried everything of the above multiple times!!! previously the wi-fi was connecting perfectly in all locations. Now it is Unable to connect to the WI-FI and even if it does is for 2 sec. I need some further help please.

My wifi does not seem to work.
It always appears the "unable to join the network ....." error message, as in the past it worked perfectly fine.
I have tried all the "apple support" options. I have even restored my iphone fully.
Sadly there is no apple store near by.
Do you suggest anything else!?
Thanks !!

My wifi does not seem to work.
It always appears the "unable to join the network ....." error message, as in the past it worked perfectly fine.
I have tried all the "apple support" options. I have even restored my iphone fully.
Sadly there is no apple store near by.
Do you suggest anything else!?
Thanks !!

Lenovo A6000 Softbricked? Needs some serious help--Please

Hi My A6000 phone got factory reset and then I tried to recover some lost pics...but I was advised that my phone needs to be rooted first, so the software opened kingo root soft, It showed me the message that phone has been rooted and when it rebooted there was a notification of software update which I said ok and ever since then the phone is stuck on system recovery mode (not sure if it is called soft brick or not) and I have tried many things including choosing all the options starting from reboot system now, apply update from ADB, wipe data/factory reset, wipe cache partition, apply update from sdcard but nothing seems to work!!! oh I for got to mention on the top of the screen it says Androoid system recovery <3e>Kraft -A6000_S035_150507 and then gives all the option and i have tried this following : https://boycracked.wordpress.com/2015/06/03/unbrick-lenovo-a6000/ but some how for the first solution it keeps on saying download failed, emergency recovery download failed...anyways it does not work Is there any soultion to this!!! Please help if there is one!

it worked the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all

Need some code help please

I am trying to make a sun and planet with the planet orbiting the sun. It is all working but the complier is having a problem with the instance variable _ball in the programs. Can anyone help me fix this, I think I'm almost there.
public class MovingBall extends javax.swing.JPanel
 int X0 = 100, Y0 = 100;
 double X2, Y2;
 double r = 10;
 double a = 0;
 double da = .04;
 double ecc = 1;
 double TWOPI = 2 * Math.PI;
 private javax.swing.JPanel _panel;
 public MovingBall (java.awt.Color aColor, javax.swing.JPanel aPanel)
 super();
 _panel = aPanel;
 X2 = X0 + r * Math.cos(a);
 Y2 = Y0 + r * Math.sin(a);
 //this.setLocation(X2, Y2);
 public void move()
 a = a + da;
 a = a % TWOPI;
 X2 = X0 + r * ecc * Math.sin(a);
 Y2 = Y0 + r * ecc * Math.sin(a);
 //this.setLocation (X2, Y2);
 public boolean inFront()
 return (a <= Math.PI);
 public void SetCircle(int x, int y)
 X0 = x;
 Y0 = y;
 //ecc = 1.0 - (double)pct/100;
public class MovingBallPanel extends javax.swing.JPanel implements Mover, Controller
 private final int INIT_X = 250;
 private final int INIT_Y = 200;
 private SmartEllipse _sun;
 private Sky _sky;
 private final int SUN_DIAMETER = 60;
 //private MovingBall _ball;
 private final int PLANET_DIAMETER = 35;
 private final int ORBIT_DIAMETER = 185;
 int _da = 1;
 int _ecc = 1;
 private final int INTERVAL = 100;
 private MoveTimer _timer;
 public MovingBallPanel()
 super();
 this.setBackground(java.awt.Color.BLACK);
 _sun = new SmartEllipse(java.awt.Color.YELLOW);
 _sun.setSize(SUN_DIAMETER, SUN_DIAMETER);
 _sun.setLocation(INIT_X - SUN_DIAMETER/2, INIT_Y - SUN_DIAMETER/2);
 //_ball = new MovingBall();
 //_ball.setCenter((INIT_X - PLANET_DIAMETER)/2, (INIT_Y - PLANET_DIAMETER)/2);
 //_ball.setAngleIncrement(_da);
 _sky = new Sky();
 _timer = new MoveTimer(INTERVAL, this);
 _timer.start();
 public void move()
 //_ball.move();
 this.repaint();
 public void go (boolean g)
 //if (g) _ball.setAngleIncrement(_da);
 //else _ball.setAngleIncrement(0);
 public void setSpeed(int degrees)
 _da = 2 * degrees;
 //_ball.setAngleIncrement(_da);
 public void setEccentricity(int pct)
 _ecc = pct;
 //_ball.setEccentricity(_ecc);
 public void paintComponent(java.awt.Graphics aBrush)
 super.paintComponent (aBrush);
 java.awt.Graphics2D betterBrush = (java.awt.Graphics2D) aBrush;
 _sky.paintSky(betterBrush);
 _sun.draw(betterBrush);
 _sun.fill(betterBrush);
 //_ball.fill(betterBrush);
}I think only those classes affect the problem. Thanks.

They all complie separately, but when I complie PlanetApp which creates the frame it has the problem. It says it can't find the symbol for ball for all the methods that I call with it, such as ball.setEccentricity(...) or _ball.fill(...). Here is the PlanetApp class. Thanks.
public class PlanetApp extends javax.swing.JFrame
 ControlPanel _controlPanel;
 MovingBallPanel _movingBallPanel;
 public PlanetApp (String title)
 super(title);
 this.setSize(600,500);
 this.setBackground(java.awt.Color.BLACK);
 this.setDefaultCloseOperation(javax.swing.JFrame.EXIT_ON_CLOSE);
 _movingBallPanel = new MovingBallPanel();
 _controlPanel = new ControlPanel(_movingBallPanel);
 this.add(_movingBallPanel, java.awt.BorderLayout.CENTER);
 this.add(_controlPanel, java.awt.BorderLayout.SOUTH);
 this.setVisible(true);
 public static void main (String [] args)
 PlanetApp app = new PlanetApp("Lab 7");
}

Hi, i need some simple help please

Below is the current code for display and counting values in a table...
boolean learningstyle = false;
String lstyleresult = "";
RS=Stmt.executeQuery("select data from learningstyle where userid='"+sr_studentid+"' order by submitted desc,id desc");
 if (RS.first())
 learningstyle = true;
 String data = RS.getString("data");
 String[] arraydata = data.split(",");
 String[] visualnos = {"4","6","8","12","13","17","22","24","25","29","33","35","37"};
 String[] auditorynos = {"1","3","9","11","14","16","18","21","26","28","32","36","38"};
 String[] doingnos = {"2","5","7","10","15","19","20","23","27","30","31","34","39"};
 int vscore=0;
 int ascore=0;
 int kscore=0;
 for (int i=0;i<visualnos.length;i++)
 if(arraydata[Integer.parseInt(visualnos[i])-1].equals("Y"))
 vscore++;
 for (int i=0;i<auditorynos.length;i++)
 if(arraydata[Integer.parseInt(auditorynos[i])-1].equals("Y"))
 ascore++;
 for (int i=0;i<doingnos.length;i++)
 if(arraydata[Integer.parseInt(doingnos[i])-1].equals("Y"))
 kscore++;
 lstyleresult = "Visual: "+vscore+"/"+visualnos.length+" Audio: "+ascore+"/"+auditorynos.length+" Kinetic: "+kscore+"/"+doingnos.length;
 else
 learningstyle = false;
%>
I want the JSP code to run the query above OR run the query below:
RS=Stmt.executeQuery("select data from learningstyle where userid='"+sr_studentid+"' and input_type='manual' order by submitted desc,id desc");
How would i do this?

ok how does the following look?
<%
 // +------------------------------------------------------------------------
 // | LEARNING STYLE DATA QUERY
 // +------------------------------------------------------------------------
 boolean learningstyle = false;
 String lstyleresult = "";
 int vscore=0;
 int ascore=0;
 int kscore=0;
 for (int i=0;i<visualnos.length;i++)
 if(arraydata[Integer.parseInt(visualnos)-1].equals("Y"))
 vscore++;
 for (int i=0;i<auditorynos.length;i++)
 if(arraydata[Integer.parseInt(auditorynos[i])-1].equals("Y"))
 ascore++;
 for (int i=0;i<doingnos.length;i++)
 if(arraydata[Integer.parseInt(doingnos[i])-1].equals("Y"))
 kscore++;
 lstyleresult = "Visual: "+vscore+"/"+visualnos.length+" Audio: "+ascore+"/"+auditorynos.length+" Kinetic: "+kscore+"/"+doingnos.length;
 RS=Stmt.executeQuery("select userid from learningstyle where userid='"+sr_studentid+"' order by submitted desc,id desc");
 if (RS.first())
 PreparedStatement pStmt = ConnStar.prepareStatement("select data from learningstyle where userid='"+sr_studentid+"' order by submitted desc,id desc");
 learningstyle = true;
 String data = RS.getString("data");
 String[] arraydata = data.split(",");
 String[] visualnos = {"4","6","8","12","13","17","22","24","25","29","33","35","37"};
 String[] auditorynos = {"1","3","9","11","14","16","18","21","26","28","32","36","38"};
 String[] doingnos = {"2","5","7","10","15","19","20","23","27","30","31","34","39"};
 else if
 PreparedStatement pStmt = ConnStar.prepareStatement("select data from learningstyle where userid='"+sr_studentid+"' and input_type='manual' order by submitted desc,id desc");
 String data = RS.getString("data");
 String[] arraydata = data.split(",");
 String[] visualnos = {"1","2","3","4","5","6","7","8","9","10","11","12","13"};
 String[] auditorynos = {"14","15","16","17","18","19","20","21","22","23","24","25","26"};
 String[] doingnos = {"27","28","29","30","31","32","33","34","35","36","37","38","39"};
 else
 learningstyle = false;
%>

I'm new to itunes and need some help. Can anyone tell me if it is possible to download an album which has explicit content without actually downloading the explicit songs?

I'm new to itunes and need some help. Can anyone tell me if it is possible to download an album which has explicit songs without actually downloading the songs that are explicit?

See if there's a non-explicit version and download that? Just download the individual songs you want, and not the others?
Honestly, your phrasing doesn't make sense. You're asking how to download an album without downloading its tracks?

HP-Pavalion DV, require replacement of Motherboard and Keyboard pleae help to get one

Hi I have bough laptop from USA. Details are provided below. It stopped working now completely. I submitted it to the HP-Authorized service center in PUNE. They mention that the product was purchased in the USA and we need to verify for the support availble in india and after their analysis the said the support is available we will dignose and sent quote. I received their dignose report and it required to replace the Motherboard and Keyboard (According to the service center dignose report and quotation). I paid the amount for the replacement of the spares however they said it is unavailable after 4 days.
Now I have query like whether the below mentioned model will get support in india or not, if yes, then how do I need to proceed.
Thanks
Nitin P.

Forgot to mention about the product details:
Model: HP PAVALION dv6t-6b00
Product #: QJ912AV
Serial #:[Personal Information Removed]
And the product is out of warranty.

Hi, i was wounding if anyone would help me get information on the company regarding the acquisition of, beats by dre, could someone please help me out as i am doing a college report on this and need some good sources of information

hi, i was wounding if anyone would help me get information on the company regarding the acquisition of, beats by dre, could someone please help me out as i am doing a college report on this and need some good sources of information

Try a search with Google.
Why should we do your homework for you?

Need some quick help - fairly urgent!

I've just taken over a new job and have been the task of finishing the new brochure for Christmas, there's not a lot to do but a lot of the measurements need changing
This is the layout I'm dealing with..
All the boxes have been made in Illustrator
The text has been done in In'Design and it seems every piece of text is it's own box if that makes sense
My question is, if I select the whole specification box - copy, paste it into Adobe Illustrator and change the text there, then paste the edited box back into In-Design, will I lose quality when it gets printed?
I'm worried if I do it this way it may come out blurred? Or am I just worrying about nothing?

I couldn't find an Illy file in the end and have ended up creating tables in ID to replicate what was already there!
Didn't take very long and I guess if I didn't do it now, I'd come across the same situation next time!
Date: Wed, 30 Nov 2011 08:48:07 -0700
From: [email protected]
To: [email protected]
Subject: Need some quick help - fairly urgent!
    Re: Need some quick help - fairly urgent!
    created by Peter Spier in InDesign - View the full discussion
There certainly are viable "quick fix" solutions proposed here, and if the dealine is looming and this file never needs to be touched again I might be tempted, but they are only postponing the pain for a file that needs periodic updates, and I wouldn't waste effort on them, myself, when that time can be put toward a proper rebuild now if that's the ultimate goal.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4054725#4054725
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4054725#4054725. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in InDesign by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How do you access your .mac email from a PC? We migrated to icloud and need some guidance. Thanks.

We migrated our .mac email to icloud and need some help in accessing our email from a PC. Many thanks!

iCloud account not necessarily needs to be an Apple ID. Make sure, if you have both, to you enter the correct one.

Newbee in j2me needs some starter help

Hi,
I am a newbee in j2me and need a starter help.
My aim is work on mobile applications/services and for that what stuff I need. I have already downloaded wireless kit. Does I require some additions softwares and what?
Can I find tutorials and starter help and from where?
Thanks in anticipation.
Regards,
Navin.

You can refer to article 'Think small with J2ME at' -
http://www-106.ibm.com/developerworks/wireless/library/wi-j2me/
It shows by example deployment of a sample application using wireless toolkit.
Manish.

I need some help adding music to my slideshow in iPhoto. When I open iTunes as the source, it says it needs to be open to populate, which it is. I have no knowledge of computers...like, at all....so I need some (simple) help? If possible? Thanks.

When I open iTunes as the source, it says it needs to be open to populate, which it is. I have no knowledge of computers...like, at all....so I need some (simple) help? If possible? Thanks.

When I open iTunes as the source, it says it needs to be open to populate, which it is. I have no knowledge of computers...like, at all....so I need some (simple) help? If possible? Thanks.

Replaced zd8000 motherboard and need some troubleshooting help please............

Similar Messages

Maybe you are looking for