Replacement 45 Watt Adapter

Okay here is my situation. I saw maybe a week or two the info.depot.apple site and saw the link for the replacement adapter. I clicked it and read through it and such. I filled everything out and they sent me the replacement adapter. However I checked back on the site and it said it was only for the black rectangular adapters and not for the clear/silver "yo-yo" adapters. But I read through the info and it said that A: it must be the 2 prong adapter. Thats what my yo-yo adapter is that i wanted to trade in. B: must be made by Samsung and mine is. and C: The serial number i put in checked out fine. I thought everything was free but i read on the shipping instructions that if i send my adapter back and its not what they want they will charge me $95.00! I wasn't told about this during the time i filled out for a new adapter. Im more than willing to send back the new adapter as I'm getting a computer soon (used eMac). Frankly I'll do anything that doesnt leave me 95 dollars in the hole. Does anyone know how I can get ahold of apple via email. I dont have the time to call them seeing as their wait time is like all other companies; too long and not what they tell you.
Powerbook G3 Lombard Mac OS X (10.3.9) Soon a new eMac...Im always 2 processor generations behind...

Hi, and welcome to Apple Discussions.
The cheapest? Probably the MacAlly adapter from Amazon.com.
It doesn't have the glowing ring that Apple's adapter has, though.

Similar Messages

Replacement AC Adapter - Output Discrepancy

I bought a replacement power adapter on ebay, the specifications for the non-apple replacement matched exactly. The one I received though is slightly different: output of 2.65A instead of 1.875A as stated on the original A1036 adapter. The vendor assures me this is acceptable, but I don't want to cook anything. Any thoughts? Thanks!
Dave

Hey Dave,
Well I'm sitting here on a 1.2 14" iBook and just read your post. I looked at my power adapter and it's a 65 Watt adapter outputting 24.5 Volts @ 2.65 Amps model A1021. Didn't realize I had one. I never even look at the Amp rating but the 65W A1021 is considered an upgrade from the A1036 and is usually more expensive. If you had a larger PowerBook it would require this adapter.
So upshot is I apparently have both ( about 5 all together ) and use both interchangeably. The iBook is not going to care how many Amps the adapter is capable of putting out. It will only use what it needs.
Richard
Message was edited by: spudnuty

Replace E1- Adapter with Business Services

Hello,
We are using E1-adapter to communicate with web Methods ( like calling business function, table IO etc..), now we are planning to replace E1- adapter with Business Services. We are using tools 8.98.11 and Application Release E812.
Question is , is it possbile to create a wraper to call any business functions just like E1-adapter? Any help is greatly appriciated.
Thank you.
Edited by: user3448054 on Oct 12, 2009 1:09 PM

Yes, you can use the JDE Business Service Server to simulate the E1-Adapter associated with webMethods. Oracle provides out of the box Business Services for a majority of the E1 transactions. We have implemented Business Services Server with our webMethods and it is working very well.
-Eric

Replacement AC Adapter for W500

Hi,
I ordered a replacement AC adapter for my W500 and got a 135W (6.75A) can I use this when the old one is a 90W (4.5A)
TIA
Solved!
Go to Solution.

Welcome to Lenovo Community! keller
Yes, it should be workable as long as the new AC adapter provides more power than the old one, as well as having the same round connector.
Have a nice day!
Peter
W520 (4284-A99)
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future
=====================================
Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
Dolby Home Theater v4 ; IdeaPad Slate Tablet

Fourpoint Surround FPS 2000 Digital - Replacement AC Adapter?

Yeah, anyone reading this is thinking, "That system is ancient! Didn't that come out around EAX 1.0?" Indeed, friends, indeed. And a faithful and wonderful system it has been. I would love for it to continue its service in my home, too, if I can locate a replacement AC adapter. Go figure. Speakers still work, but without power what good are they? Again, I'm looking for the AC adapter for the Cambridge Soundworks Fourpoint Surround FPS 2000 Digital speaker package. It features 5VDC 3A output. I'm a bit hesitant to PAY to ask Creative if they can help me through customer support. =/ Especially for such an old system that gets no recognition on their site at all. =) Thanks all! -Rober

Cambridge Soundworks FPS2000 Digital System Model#: C5W500AC Adapter Model#: TEAD-66-53000U Hope that helps.
I just found a generic transformer at Radio Shack (gag me!) and they want $90US (again, please) which is a bit more than I ever plan to pay for a Radio Shack part. At $90, I'd just save up and buy one of the newer model systems. =/

Replacement AC Adapter

I have been looking and looking for a replacement AC Adapter
For my Laptop and there website does not make it easy.
My laptop is the 3000 Family G530
Type - 4446
Model - 25u
I don't know which Adapter to buy. The one I have now is 65W, I think
but they only offer 90w , when I do a search for adapters.
I just want to buy the correct one.
Thanks

leekirb,
I agree with Duck3 - I'd go with 41R4515 the 90W AC adapter for N500 / G5xx
Here is the link to it on the US shopping site.
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How to identify 45 watt vs. 65 watt adapter? (Battery Updater not working)

I have read that it's better to use the original 65 watt adapter, not the 45 watt, to charge my PowerBook G4. Can you tell me how to tell which one I have? The wattage is not listed on the adapter anywhere.
My real issue is that I run the PowerBook G4 Battery Updater and I get the message "You must have a 65W power adapter plugged into a working power source during the update process." I am plugged in using what I think is the adapter that came with it, but it does not complete the update.
Thanks!

You can calculate the wattage from the information on the power supply. Look for the output voltage (i.e. 24.5v) and current (i.e. 2.65A) and multiply to get 64.925 watts.
Be aware I think there have been reports of 65W adapters erroneously showing in System Profiler as 45W adapters. I don't recall if the adapters were mislabeled or what.

Replacement car adapter for insignia dual screen portable dvd player 7"

Where can I find a replacement car adapter for our insignia dual screen portable dvd player 7"?
Thanks

tiggerjackson –
I am so sorry that no one has reached out to you. Please
give us a call at 1-888-237-8289 and asked to be transferred to Insignia
Products. Again, I apologize for the delayed response.
Kind regards,
Jesus|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Help with WRVS4400N - Need to find a replacement AC Adapter

Hello, I have a Cisco WRVS4400N V2. I need to find a replacement AC adapter and the stands if possble. Can anyone direct me to the right place? Thanks.

Mike,
unfortunately we do not stock or have product numbers for the AC adapter or the stands. Any universal AC adapter should work provided that it provides the following power requirements:
Power
12V 1A
Hope this helps,
Blake Wright
Cisco SBSC Network Engineer

Replacement power adapter MODEL TEAC-66-135000

Hi
would anyone know where I could get a replacement power adapter (MODEL TEAC-66-135000) for my Creative Inspire 6.1 6700 system?
I tried to call the Creative customer service department but they were not able to help me.
Thanks.

Hi,
I actually called again and this time the lady was willing to help me. I ordered a similar power adapter which works well my speaker system:
Power Adapter 12VAC 4.2Amp @ $11.99
Give it a try. Good luck.

Replacement MagSafe Adapter

The cable on my current one is becoming exposed, will I be able to get a replacement from my warranty or will I have to buy a new one?

Sounds familiar - After 2 yrs failing to train my dog to limbo under the power cord the inevitable happened and the original grossly underdesigned "strain relief" at the magsafe end failed.
After some lengthy and tedious run-a-rounds thru my local Apple Servicer I eventually got a replacement from Apple Care UK posted direct to me.
If the link below works....
+http://i41.tinypic.com/2ibnjoy.jpg+
...then you should see the top cable with a noticeably shorter "strain relief" than the lower newer replacement. If the length on your cable SR is less than 0.25 inch and you haven't been practising the hammer throw with it at the highland games then you probably have a reasonable justification for a warranty repair.
Now if your still in Warranty and depending on how far you are from your nearest Apple Service/Repairer you might want to check:
1. Whether they have a replacement Pwr adapter in stock (mine insisted they don't keep them!?! but only after 24 hrs delay while - )
2. they take your defective item for analysis.
3. that their database confirms your unit serial number is still in warranty (mine insisted that they didn't have Apple Care registered to me- but only after keeping me waiting for 24 hrs!)
Alternatively if you have Apple Care it might be more convenient to ring them and they'll send you one on Self Repair..... but do check whether they want the old one returned as they requested me to return mine but when I received the replacement the accompanying documentation specifically stated not to return the defective unit!!!
(A keen observer will note the that from the bold font on the letter in the picture)
Which then demonstrates the final exasperation with Apple because there doesn't appear to be any UK email address to contact Apple Care?
Anyway - good luck with yours....

My ipad not turning on anymore even i charge it in the 10 watts adapter and connect it in my pc.. can you help me???

my ipad not turning on anymore even i charge it in the 10 watts adapter and connect it in my pc.. can you help me???

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. Happened to me once, about 6 months ago, and a reset got it working again.

Buying the right replacement power adapter for HP Envy

The original power adapter for my brother's HP Envy Touchsmart laptop has appears to have partially melted. I'm trying to find the correct adapter to use as a replacement, but I have questions because it looks like he will have to order one of the Smart adapters, which is not what he used originally. The product number is E0M27UA#ABA. If you need any more information just ask and I will try to post it as quickly as possible. Thank you in advance for any help you can give us.

Hi,
This is a list from Down under. You should be able to find similar site in your country:
http://www.psaparts.com.au/laptop-notebook/hp/envy-13-1050ea-battery-adapter-charger.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Best Replacement AC Adapter?

Why-oh-why does Apple refuse to make a better adaptor for their laptops? I know they could do it if they just put their minds to it.
Another sad AC adaptor is looking like it is going to fail me soon. I am now only allowing it to be used when I am right next to it, in case it catches fire.
So...what do I replace it with. Buying another pathetically constructed AC adaptor that will fail in exactly 1 year and one week (perhaps they have an inbuilt failure mechanism??) seems out of the question right now, but as I look at the options, it is hard to know which is best.
Does anyone have any recommendations for third-party adaptors that have held up well? Also, should I be concerned about purchasing one that isn't grounded and why?
Thank-you in advance for any help!

mcetech.com makes one for $39.95. I like it. It pulls apart like an old fashioned PB 2400 adapter, in fact fairly easily. This can be a pain, but you're also less likely if you trip over the cord to bring the whole computer with you. It doesn't light at the end like a normal adapter, of course. It's not grounded or even polarized, but I've never had any problems. Here's the link. (no line feeds, of course)
http://store.mcetech.com/Merchant2/merchant.mvc?Screen=PROD&ProductCode=ACG4-IB2001&Category_Code=ACCACAUTOADPT&ProductCount=0

Replacement AC Adapter for speaker system

) Hello,
i have M5300 speaker system which its adapter died today....i replaced it with a universal ac adapter which outputs 12V - 200mA..
the original ac adapter read 12V - 2.9A ......
after replacing the ac adaptor, i could not pump the sound up as it becomes very distorted esp the bass.....
is this amp difference causing the problem? any suggestion plz
thanks

Welcome to Lenovo Community! keller
Yes, it should be workable as long as the new AC adapter provides more power than the old one, as well as having the same round connector.
Have a nice day!
Peter
W520 (4284-A99)
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future
=====================================
Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
Dolby Home Theater v4 ; IdeaPad Slate Tablet

Replacement 45 Watt Adapter

Similar Messages

Maybe you are looking for