Replacement AC Adapter for speaker system

) Hello,
i have M5300 speaker system which its adapter died today....i replaced it with a universal ac adapter which outputs 12V - 200mA..
the original ac adapter read 12V - 2.9A ......
after replacing the ac adaptor, i could not pump the sound up as it becomes very distorted esp the bass.....
is this amp difference causing the problem? any suggestion plz
thanks

Welcome to Lenovo Community! keller
Yes, it should be workable as long as the new AC adapter provides more power than the old one, as well as having the same round connector.
Have a nice day!
Peter
W520 (4284-A99)
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future
=====================================
Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
Dolby Home Theater v4 ; IdeaPad Slate Tablet

Similar Messages

URM Adapter for File System issue.

Hi, I am just starting out on using the URM Adapter for File System and I have a few questions about issues I am facing.
1. When I try to create multiple searches and map them to Folders/Retention Categories in URM, it does not work. I am able to map one search via one URM source to one Folder/Retention Category (without my custom attribute from question 1). However in Adapter’s Search Preview I am able to perform a search on the documents successfully. Would different searches require different URM sources in Adapter?
2. Does the adapter work with other Custom Attributes? I have added an attribute in addition and in the same way as "URMCrawlTimeGMT" is added in Oracle Secure Enterprise Search (I created a custom Document Service and Pipeline to add a metadata value) and in the URM Adapter’s config.properties file and when I create a search in Adapter based on the custom attribute, it does not map the documents into URM. I am however able to search the documents in Adapter’s Search Preview window with the custom attribute displaying correctly.
Any help with this topic would be really appreciated. Thank you.
Regards,
Amar

Hi Srinath,
Thanks for the response, as to your questions,
1. I am not sure how to enable Records Manager in adapter mode. But I am able to login to the Records Manager web page after starting it up through StartManagedWebLogic.cmd URM_server1.
2. The contents of the file system should be searchable in Records Manager, and should be able to apply retention policies to the documents in the file system, I do not need to have SES, but apparently the adapter needs to have SES as a pre requisite.
Upon further investigation I found that in the AGENT_DATA table the values being inserted were "User ID"(UA_KEY) and NULL(UA_VALUE), so I just made the UA_VALUE column nullable and I was able to pass that step. Is this the wrong approach to fix the issue.
Could you please let me know about enabling Records Manager in adapter mode, I am not able to find documentation online, I have been through the Adapter installation and administration guides. Thank you once again.
Regards,
Amar

Replacement AC Adapter for W500

Hi,
I ordered a replacement AC adapter for my W500 and got a 135W (6.75A) can I use this when the old one is a 90W (4.5A)
TIA
Solved!
Go to Solution.

Welcome to Lenovo Community! keller
Yes, it should be workable as long as the new AC adapter provides more power than the old one, as well as having the same round connector.
Have a nice day!
Peter
W520 (4284-A99)
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future
=====================================
Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
Dolby Home Theater v4 ; IdeaPad Slate Tablet

Replacement car adapter for insignia dual screen portable dvd player 7"

Where can I find a replacement car adapter for our insignia dual screen portable dvd player 7"?
Thanks

tiggerjackson –
I am so sorry that no one has reached out to you. Please
give us a call at 1-888-237-8289 and asked to be transferred to Insignia
Products. Again, I apologize for the delayed response.
Kind regards,
Jesus|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Buying the right replacement power adapter for HP Envy

The original power adapter for my brother's HP Envy Touchsmart laptop has appears to have partially melted. I'm trying to find the correct adapter to use as a replacement, but I have questions because it looks like he will have to order one of the Smart adapters, which is not what he used originally. The product number is E0M27UA#ABA. If you need any more information just ask and I will try to post it as quickly as possible. Thank you in advance for any help you can give us.

Hi,
This is a list from Down under. You should be able to find similar site in your country:
http://www.psaparts.com.au/laptop-notebook/hp/envy-13-1050ea-battery-adapter-charger.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Replacement power adapter for 2008 MacBook Pro

Does anybody know if you can get a replacement power adaptor for the 2008 MacBook Pro. Mine crapped out and I'm freaking because the one they have for sale does not look like it will work, help PLEASE!!!!

If I think I know what your saying, it sounds like the store only had the Magsafe 2 connectors for the new model Macbook Pro's. The good news is yes stores still sell both Magsafe 1 and Magsafe 2 adapters. My advice would be to just take your adapter into the store and show the sales person what you need.

Replacement power adapter for Gigaworks T20 speakers

I need a replacement power supply for my Gigaworks T20 speakers. Where do you get this? The Creative Web site seems to have no information about where to get it, so any information would be appreciated.

Try to find out universal AC/DC adapter at amazon/newegg, such as this one (U.K. version): http://www.amazon.co.uk/Universal-Regulated-2000mA-Adapter-P-007F/dp/B002YY9E/ref=sr__/275-2088-483635?ie=UTF8&s=electronics&qid=262244783&sr=8- It has many plugs, one probably must fit. But before switching the power, one should figure out the polarity of connectors. It's not the first time Creative power supplies show below average reliability. I think Creative should choose top quality power adapter suppliers, such as Antec, Delta or Seasonic, not some cheaper lower quality parts.

Recommendations for speaker systems for DVD player/recorder

I'm getting a DVD recorder soon and I hope to get some recommendations on suitable Creative speaker systems.
The room is fairly big but the TV area is rather confined..so i prefer a set whose speakers are not too big or bulky or numerous (i think i'll stop at 5.1 since i have limited space to put the speakers). Budget is flexible, but of course the cheaper the better (hopefully under $350).
The TV sounds good when watching TV programs but it reproduces an unbalanced ratio of muddy dialogue and loud sound effects when playing back DVDs. I end up having to crank up the volume so high to hear what the characters are saying, and of course, the background audio gets boosted way loud as well. So my main consideration is reproducing clear speech and dialogue and crisp (not overly loud) background audio - any recommendations for this?
Which models have an optical/coaxial input? Can i just hook up the speakers to the optical/coaxial or RCA outputs of the DVD recorder/player since most models have in-built DTS decoders? Which are the least problematic models?
Thank you.

I think I have the same question more or less. I bought a cheap Best Buy memorex speaker docking station and I need a male to female IPOD cable so that I can Play the radio and charge the IPOD at the same time as well of course have the head phone jack plugged into the Line In that acts as the antenna.
So if I had the Male to Female cable My dock would charge and the cable to the line in acts as a Antenna. I think this makes sense..

Replace power adapter for Tecra 8100

Hi support,
I have Tecra 8100 where its original power adapter has died. I need to buy a new one, but I found that Toshiba has replaced the PA2444U adapter model with a new model. Which power adapter model that is now compatible with Tecra 8100?
Thanks. I really need an answer because I need to work with the laptop.

The Tecra 8100 will function with many adapters from Tecra 8000, 8200, 9000, 9100 and the M1, M2 range etc.
There are of course differences in the output current rating, but in practice it is still possible to use a higher output adapter without issue, provided the voltage is 15V DC.
For example, I am currently using a model PA2450U (15V, 3A) plugged into my Tecra 9100 port replicator and this works fine. The only potential down side is that it might take longer to charge the battery than it would with the correct model (which would be rated 4A).
This means you shouldn't have too much trouble finding a suitable substitute.

How to replace power adapter for PowerBook G4

I have a three year old powerbook G4 and the power adapter is toast (at least I think that's the problem). Doesn't charge and no illuminated ring around the connector to the computer.
Does anyone know how to replace this? Can't find it anywhere online or at Mac retailers.
Thanks.

Replace the power adapter plug? Most folks won't bother, it's a hassle. The whole adapter is easily available from any Mac vendor. But before replacing anything, have you tried the following:
-reset the Power Management Unit (PMU)
http://support.apple.com/kb/HT1431?viewlocale=en_US
-reset the PRAM
http://support.apple.com/kb/HT1431?viewlocale=en_US
-unplug the power adapter from the wall socket for a while to reset.

Replacement AC adapter for GX630

Anyone know any reputable sites that sell ac adapters for MSI notebooks? And is it possible to use a "smaller" one? The one this came with is freakin HUGE!

I would NOT replace the delivered one with a smaller one.
The default isn't that big, it's as small as it needs to be to deliver the needed power.
If you connect a smaller one it can burn up OR destroy the entire laptop.
You asked a gaming laptop, they have bigger power needs.
Gaming and little power don't go hand in hand!

Replacement power adapter for the ZenTouch 2

Can you believe someone stole my power adapter, but not the player itself? WTF?
Gotta love NYC. Anywho, I looked on the site here and did not see a power adapter listed for the ZenTouch 20GB. Anyone know if this exists or not? I saw one for the Zen Nomads, but they didn't list any of the ZenTouch models. Would appreciate some help on this.
Thanks all,
Tim

This one will work. Creative really need to update this page and make it very clear what models this works with.

Payload at Adapter for System Errors - SOAP receiver adapter

Hi Everybody,
I am working on an Idoc to SOAP asynchronous scenario.
There are connection issues between SOAP adaper and the target webservice.
I need to capture the Idoc number from the message payload for the Erroneous messages at the adapter for the System errors.
Is there any way of capturing field values from the payload (Say, Idoc number) at the SOAP receiver Adapter level.
Helpful answers will be rewarded points.
Thanks & Regards,
Zabiulla

Hey,
I think you need to implement a module inorder to get the payload at receiver adapter module.
As far i concern you can not directly refer the payload in adapter in receiveer communication channel unless you have your own module, which gets the payload. Check the Modules tab in the communication channel and also regarding how to get the payload for error information, follow the steps mentioned in the below link, which gets the payload in file. hop it will resolve your issue.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/writepayloadtoafilefromAdapter+Module
Regards..
Prasanna..

Travel Adapter for 130W T530

Hello,
I have a T530, and I'm stuck for what I need to do to get a travel (airplane+car cigarette lighter+AC) power adapter for this system. It has the enhanced graphics, so I use the 130W adapter.
I have the 90W travel adapter from my T500, and I tried connecting it with Power Manager set to "airplane seat power mode" so that it wouldn't blow any fuses and will reduce its power draw. However, when I connect the 90W adapter, it runs off battery anyway and hover over Power Manager shows a tooltip saying that "this adapter does not provide enough power". So, I disconnected, turned off Airplane Seat Mode, and reconnected, and it did run for a few seconds but sure enough blew the 3A fuse in my car.
So, two questions:
1) Anyone know where I can find a 130W+ travel poewr adapter? I want to have 130W when I'm on AC mains, and the option to use DC power, without having to carry two separate bricks. So I need the 130W equivalent of the old travel adapter. I don't even see a 3rd party option like iGo at this wattage.
2) Anyone know how to get a 130W T530 to stop blowing fuses? If I have 3A@12V, that is up to 36W available. I noitice right now while disconnected from a charger that my laptop is pulling 1.4A @ 11.57V from the battery = 16W, so it should definitely be possible to run off of my car's cigarette lighter without blowing the fuse. I was hoping the "airplane seat mode" setting would do the trick... but apparently not.
One note... hardwiring an AC inverter to the battery/alternator with an 11A fuse is not an option for me since I am always in a rental car when using my laptop.

I have a 15A fuse for all 3 cigarette lighter outlets together. My 2-way splitter in one of them has a 3A fuse in each leg, which I am holding, that is now blown after my experiment. Be that as it may, my question is whether there exists a travel power adapter that is capable of outputting 130W when connected to AC mains and also running at any wattage (maybe 130W or lower) when connected to car DC power. Can anyone help with that?

WS Adapter for Receiver Proxy

Hi all,
I am working on an ECC to SRM scenarion on XI 7.1. I am using WS Adapter at the receiver side and there is no ABAP Proxy code in the SRM side. There is however, proxy for the sender side, ECC. I am getting an error about logical port, I raised a question few days ago but I am not able to solve it. I have few doubts.
1) Is it possible to use WS Adapter for receiver system like SRM which is an SAP System and also without using a proxy code ?
2) Do I have to configure a logical port for this scenario using SOAMANAGER as I have only one XI server in the landscape. I saw a blog but that blog talks about multiple XI servers. I have only one XI server but I am getting an error at the call adapter step something like " "Error while determining logical port Cannot find logical port for agreement abc and interface xyz"
I don't want to do the entire thing using Proxy
Regards

>1) Is it possible to use WS Adapter for receiver system like SRM which is an SAP System and also without using a proxy code ?
Yes it is possible if you use direct connection using WS adapter. you dont need proxy code
>Do I have to configure a logical port for this scenario using SOAMANAGER as I have only one XI server in the landscape. I saw a blog but that blog talks about multiple XI servers. I have only one XI server but I am getting an error at the call adapter step something like " "Error while determining logical port Cannot find logical port for agreement abc and interface xyz"
Refer this link for your need
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b043ef4e-e8d1-2c10-7d88-8077b209ce55?quicklink=index&overridelayout=true

Replacement AC Adapter for speaker system

Similar Messages

Maybe you are looking for