Replacement antennae for Cisco 800 wireless series?

Hi. A customer has a rather thick wall at their site. Itsmaking mincemeat of the signal to their 7921 IP phone. Can I attatch different antennae's to the 800 series router? specifically something omni directional?

Hey Huw,
Just to jump in for a minute :) Cisco does offer "low-loss" extension cables for sale (like the two listed below);
AIR-CAB020LL-R
20-ft. low-loss cable with RP-TNC connectors
AIR-CAB050LL-R
50-ft. low-loss cable with RP-TNC connectors
Cisco Aironet Antennas and Accessories Reference Guide
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008008883b.html
Hope this helps!
Rob
PS: They also come in 100 and 150 foot lengths.

Similar Messages

How we archieve configuration for Cisco ASA 5500 series appliances

Hi,
We need to archieve configuration for Cisco ASA 5500 series appliances.
We have Cisco works LMS 3.0.1.
Device package installed is 4.2
Any help would be appricated.
Thanks in advance.
Samir

Hi ,
Thanks for your answer.
Right now we are using TACAS to login in to the ASA. That means we need single username and password to login via
Cisoworks. Am I correct ?
Waiting for your reply.
thanks,
Samir

Software Version Upgrade for Cisco 4402 Wireless Lan Controller

Hi,
We have Cisco 4402 Wireless Lan Controller with Software Version 3.2.171.6 and we want to upgrade it to latest version.
So can anyone please let me know the latest version to upgrade the WLC?
Also since WLC is running on very lower version is it possible to upgrade to the latest version directly or we have to move it step by step to upgrade this to latest version?
Thanks

Take a look at the compatibility matrix below:
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
7.0.235 is the latest that you can go to:
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_0_235_0.html
The release notes outline the upgrade process.
"Upgrade to 4.0.206.0 or later 4.0 release, then upgrade to 4.2.176.0, before upgrading to 7.0.235.0."

Replacement model for Cisco 7945g.

I'm needing to order more phones for my company due to company growth. Our most common phone model is the 7945g and for all intents and purposes that model has been solid with few issues for us and I do not hesitate to reorder that model again. I also do not see EOS or EOL information for the model which makes me believe it'll be around for quite a bit longer. With that being said, I'm looking for some peoples opinions and experiences on other newer phone models that may sway me from the 7945. Besides the obvious hardware upgrades with newer models (Video, Wireless, etc...), I'm really looking to see if the other models are stable with little need for consistent firmware upgrades.
Any suggestions?

The 794X and 796X as well as the 797X series has been the best and most solid build I have ever seen from Cisco. I've had multiple bad ones from the 7800 series so I would avoid those, plus they just aren't as good in an environment already on the 7900 platform. The only other ones are the 8900 and 9900 series. Can't really think of any other phones with buying for a large company unless you need a break room phone and can make go with a 3900 series.

Are there replacement earpads for MDR-RF915RK wireless stereo headphones?

Will any of the replacement earpads currently available fit my Sony MDR-RF-915RK Wireless Stereo Headphones?

The MDR-RF915RK Wireless Headphones were first released in the market last 6/1/2001 so accessories may no longer be available. However, you can check with our Parts and Accessories Store here for more information. Thanks!
If my post answers your question, please mark it as "Accept as Solution"
http://bit.ly/LapMagWin

Error Compilation MIBs Supported for Cisco UCS C-series software release 1.4(3) and later releases on IBM Director 6.3.2

Hi,
I have an IBM director 6.3.2 on a Windows Server 2008R2
I try to install the MIB for manage Cisco UCS C-460 server.
I downloaded the mib on the cisco ftp.
the files extension was my. I cahgne it to .mib. For the moment I success to import some ones.
But when I try to install Cisco-Unified-Computing-TC-MIB, I have got the error in the join file.
Ho can I fix this issue...

Hi,
I have an IBM director 6.3.2 on a Windows Server 2008R2
I try to install the MIB for manage Cisco UCS C-460 server.
I downloaded the mib on the cisco ftp.
the files extension was my. I cahgne it to .mib. For the moment I success to import some ones.
But when I try to install Cisco-Unified-Computing-TC-MIB, I have got the error in the join file.
Ho can I fix this issue...

Replacement kit for cisco stater pack express

pls apart from having jabber on the TMS or Be6k, what replacement
kit has been put in place for the starter pack express.
client of mine requested for one but was given VCS control base
and its didn't achieve what it was meant to do.
papa eyibio

Hi Chad,
You don't need TMS to get Jabber Video for Telepresence (Movi) working. You just need the VCS. I have a VCS Starter Pack X6.1 and I use Jabber Video for Telepresence v4.4 :-)
Hope to help, please remember to rate the post if it does.
Kind regards,
- Adrian.

Looking for Cisco 6500 E series 1/10 G SFP Module

I am looking for 24 ports 1/10G SFP module for my 6509E chassis and WS-SUP720-3B sup module.
I have found the following from my research
WS-X6704-10GE - 4 port 10G module which supports only 10G not 1G
WS-X6708-10G-3C - 8 Port 10G module which supports only 10G not 1G
WS-X6724-SFP - 24 Port 1G SFP module which supports only 1G not 10G
Thanks for your help

Hi datamodule, i see that you are looking for a 24 ports 1/10G SFP module for the Catalyst 6509E. From what i am looking at it's either 1G or 10G. Please check this link for further assistance: http://cs.co/9000YTBE. Feel free to message me for further assistance.
Thanks,
Angela ([email protected])

Replacement Model For HP Designjet 4520 Printer series

I understand that the HP Designjet 4520 Printer series has been discountinued. See information on the link below;
http://h10010.www1.hp.com/wwpc/uk/en/sm/WF10a/18972-18972-3328061-3328080-3328080-3879146.html
Could you please advise on the replacement model for HP Designjet 4520 1067 mm Printer (CM767A) and HP Designjet 4520ps 1067 mm Printer (CM768A).
Thanks and hope to hear from you soon.

Hi d_destiny,
I understand you would like to see some replacement models for the Designjet 4520 series. Please click on the link for all Designjets now available from www.hp.com.
If you do not see a product that is comparable I suggest you contact our technical support at 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. http://www.hp.com/cgi-bin/hpsupport/index.pl they would be able to let you know which product would work best for you.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Why do I need a hardwire for my WRVS4400N wireless router?

I am not very technically inclined. Plug and play is my way. So when I got my first router (a linksys) i plugged in the ethernet cables and voila!-----internet access as well as connectivity for my xbox 360, ps3 and Wii. The people rejoiced.
Times change. I was happy with my last Linksys hard-wired router, so when I finally got tired of all the wires laying around I went Linksys wireless. BEST BUY told me the best wireless/hardwire router around is the WRVS4400N. With this router I can have my 2 360's wireless as well as my pc. The Wii and PS3 along with my wife's computer are hardwired. There is also a hardwire going from the router to the Comcast cable modem. Plug and play this, that and the other thing and voila!-----internet and gaming galore! Once again, the people rejoiced.
That is, until, I decided to make my wife's computer wireless. The people rebelled. Once my wife's pc went wireless (like my two 360's and pc), I lost all connectivity. No logging on to the playstation network, XBOX live, Wii surfing, and no internet access. After many hours of turning off this, resetting that and plugging/unplugging the other thing, we finally figured out how to keep the people happy--one of the pc's has to be hard-wired to allow everything else to work (internet access, gaming, etc.).
So the people are happy, but the king is not as his kingdom is bound by the tyranny of one ethernet cable. Not to mention the fact that his wireless signal is unsecured.
This makes no sense to me. Why do I need one of the pc's to be hard-wired just to get everything else to work?

Trying to download firmware from this go_____ed company is like trying to pull teeth! I mean, w_f?! Are they trying to lose customers?
I found answer ID 4030 and under step 2 it told me "to go to the Linksys download page, click here and verify the model and version number of your Linksys product." I clicked on the link and that took me to "Support and Services." I entered my model number where appropriate and that took me to some kind of small business section! Small business?!?!? I'm a bloody home user, not some f____ng businessman!!!!!
Anyway, I click on this link: Cisco Small Business (Linksys Business Series) software and firmware downloads (I know it says Small business, but where else was I supposed to go? I mean, this is where Support and Services sent me). That link took me to Support>Download Software.
Under "Support>Download Software>Select a Software Product Category" I clicked on the Router Software link (which had a padlock icon next to it). They wanted me to login again. So I try, but I keep getting repeated (and erroneous) login errors telling me I entered my username and password incorrectly. I checked my username and password many times. No problems with my username or password. Thus, a dead end there.
I went to the "Support>Download Software>Software Search" and entered the model number of my router. I clicked on this link: Download Software for Cisco WRVS4400N Wireless-N Gigabit Security Router - VPN V1.0 & V1.1 : wrvs440.... Guess what? They wanted me to login AGAIN!!!!! So I try, but I get the same login error messages I got before!!!!! Je___ _______ ____st! Another dead end!
I am at my wits end here. Getting some kind of firmware for my router to work properly should not be this f____ng difficult! I don't even know how to access my router's web user interface!
Any other suggestions before I finally say goodbye to Linksys/CISCO? Because I mean after this b______t experience, the next time I need some type of router or modem or something along those lines, I'm gonna think twice about going to Linksys/CISCO.
P.S. Sorry about my edited language, but if you had to go through what I did, I believe you'd be just as frustrated as I am. I spent around $250.00 for this router and it doesn't even work right!!!!!
Message Edited by JohnJr on 04-02-2009 10:07 PM
Message Edited by JohnJr on 04-02-2009 10:08 PM

Cisco Aironet 1400 Series EoL

Hi all, what is the replacment model for the eol 1400 series Ap's that I need to purchase?
Thanks
Martyn

Kindly review the below link:
http://www.exaltcom.com/uploadedFiles/003_-_Products/005_-_Data_Sheets/DS-Cisco-ExtendAir-r5005-B-1010.pdf

Replacement Printer for HP 2100TN

I have an obsolete (according to HP) networked printer which has ceased to function. No one can tell me why it has stopped. It was designed to work with OS9, and I am now using OS10.4.8, and HP will not support it, or even answer questions. I get the following error message:
"Unable to connect (retry in 30 seconds). Cannot allocate memory."
Siince I cannot figure out why it won't work, and need a printer, I would like to replace it. Can anyone recommend a home network printer as a replacement? Color is not necessary, but do wish to stay with a Laser printer.

Hi d_destiny,
I understand you would like to see some replacement models for the Designjet 4520 series. Please click on the link for all Designjets now available from www.hp.com.
If you do not see a product that is comparable I suggest you contact our technical support at 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. http://www.hp.com/cgi-bin/hpsupport/index.pl they would be able to let you know which product would work best for you.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Does anyone have current Visio stencils for the newer wireless products?

Does anyone have the latest Visio stencils for Cisco's wireless products? Specifically looking for 3502 and 1260 series access points and the 5508 series controllers.
Thanks in advance!

Cisco does not seem to have an official stencil for the 5508. However I found this link and it seems to have 5508 stencils:
http://www.4shared.com/file/m_dueG18/Cisco-WLC-5508.html

Trying to get a replacement fan for HP Pavilion 15-n037so Notebook

Hi, I am trying to find out where I can buy a replacement fan for a Pavillion 15 series laptop (15-n037so) in Sweden. HP PartSurfer returns no parts and I cannot find a HP phone number to call to ask. Any help (either a web address or a phone number) would be much appreciated. Thanks in advance, Mike.

Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. Here is the Maintenance and Service Guide for your Notebook. Please look at page 25. It gives you the fan part number. You could also Contact HP. To Contact Us please use the following link to create yourself a case number, then call and it may help speed up the call process:
Step 1. Open link: www.hp.com/contacthp/Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone number
Case number and phone number appear.
They will be happy to assist you immediately. Have a great day!

Cisco Catalyst 3850 Series

Can I use DC power supply for
Cisco Catalyst 3850 Series?

Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. This is only one forum among the many
that are on the TechNet Discussion Forums, and given your post, you likely chose the wrong forum. This is a standard response I’ve written up in advance to help many people (thousands, really.) who post their question in this forum in error, but please
don’t ignore it. The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more
detail about your problem, that could include screenshots of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you! It’s called the Where is the forum for…?
forum and it’s here: http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks
MSDN and TechNet Subscriptions Support
Did Microsoft call you out of the blue about your computer?
No, they didn't.

Replacement antennae for Cisco 800 wireless series?

Similar Messages

Maybe you are looking for