Replacement fan for srw 2048
I have a SWR 2048 switch that has started to make some noise - I suspect one of the fans is starting to go. It looks like the fans are from Sunon, 40mm x 40mm x 20mm, 3 pin, 12v.
Does anyone know the model number or a good source for a replacment fan?
Thanks
Michael, I believe this is a DC fan
I think this the model/spec that you need.
MB40201V2-000U-A99
40X40X20
12
0.050
0.60
6200
7.7
0.16
21.0
-Tom
Please mark answered for helpful posts
Similar Messages
-
Trying to get a replacement fan for HP Pavilion 15-n037so Notebook
Hi, I am trying to find out where I can buy a replacement fan for a Pavillion 15 series laptop (15-n037so) in Sweden. HP PartSurfer returns no parts and I cannot find a HP phone number to call to ask. Any help (either a web address or a phone number) would be much appreciated. Thanks in advance, Mike.
Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. Here is the Maintenance and Service Guide for your Notebook. Please look at page 25. It gives you the fan part number. You could also Contact HP. To Contact Us please use the following link to create yourself a case number, then call and it may help speed up the call process:
Step 1. Open link: www.hp.com/contacthp/Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone number
Case number and phone number appear.
They will be happy to assist you immediately. Have a great day! -
Replacement fan for R6850 Cyclone PE
Hi,
You may all laugh at the noob who managed to stick his fingers into the brand new fan and break two blades off!!!!
So my question is can anyone help me source a replacement fan for this little beauty?
The fan part number is PLA09215B12H and is made by power logic.
Shame as it was whisper quiet too.
Any chance MSI might be able to provide one?
Thanks.
Mac.Quote
Any chance MSI might be able to provide one?
call near msi office and have ask, but most probably you will need to send the card for repair.[they will charge you as its psysical damage] -
The CPU-fan of my AE2400 is starting to break down (making terrible noise the first few minutes after starting up).
On-line I can only find replacement fans for MSI laptops.
Can anyone please tell me where can I find a replacement fan or if there is a replacement fan from a specific laptop model I can use ?Ask MSI: >>How to contact MSI.<<
-
Replacement Fan for DV7-1261WM
Hey guys,
Recently the top fan on my DV7 burnt out, or went out. I've tried searching around the internet for a replacement, but I'm not really confident on some of the websites I've come across.
Heres the fan I'm talking about:
Any ideas on where I can score a replacement fan? Thanks in advance guys!
This question was solved.
View Solution.I believe the part you want is number 488885-001, according to the service guide (below)
You could also try the Intel version.... 480481-001. These can be found on ebay for as little as $5. The HP parts store seems to suggest that this would also work, they are listed as a part for sale for your model.
The service manual and repair procedures can be found at http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01918142/c01918142.pdf
Unfortunately, it's a fairly complicated process to replace the fan. If you're not a techie or have experience repairing laptops, you might want to check out a HP authorized repair shop. -
Replacement Fan for DV7-6195US
Greetings All,
I need to order a replaceent fan/heatsink for a DV7-6195US notebook. I can't seem to find the part # or any other info. for this on the usual pages. Can anyone point me in the right direction?
Thank you in advance.
--- GaryGary,
Specs: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02863098
Manual: http://h10032.www1.hp.com/ctg/Manual/c02842278.pdf
The manual only lists fan/heat sink assembly for Intel processors with 2GB discrete graphics system & not for 1GB discrete graphics, which is present in yours.
This is your Laptop's HP part surfer link:http://partsurfer.hp.com/Search.aspx?SearchText=LW170UA
In there too, only UMA & 2GB graphics system cooling fan/heat sink assembly part numbers are listed,
Only part for 2GB discrete graphic system is listed- 666391-001 (partsurfer) or 653627-001 (manual) .
http://www.amazon.com/gp/aw/d/B008L30LKW?pc_redir=1408522867&robot_redir=1
But, from this thread - http://h30434.www3.hp.com/t5/Notebook-Hardware/Cooling-Fan/td-p/3475779 , spare part number for 1GB discrete graphics such as yours is listed as 666390-001.
http://partsurfer.hp.com/Search.aspx?SearchText=666390-001
http://www.newegg.com/Product/Product.aspx?Item=9SIA3DY1S03962
http://m.ebay.ca/itm?itemId=221496259906
http://m.ebay.com/itm?itemId=390914163035
Through online stores, I could find that both are compatible with your laptop model - 666390-001 or 666391-001.
Hope this helps.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP** -
where can u buy a fan for a g5 power mac tower? i cant seem to find one.
There are several after market possibilities, with the Zalman VF700 and VF900 coolers being preferred:
http://www.zalman.co.kr/eng/product/Product_Read.asp?idx=145
Hereis a how to (different graphics card):
http://www.xlr8yourmac.com/Graphics/mac7800ZalmanVF900.html#storytop
A similar fan, the Vantec iceberq 5 would work as well.
The VGA cooler from Arctic Cooling or Vantec Iceberq 6 is an excellent option as well.
Here is a how to:
http://www.xlr8yourmac.com/Graphics/VGAsilencer_install/VGA_silencerinstall.html -
Replacement fans for quicksilver 2002 933Mhz
Hello There, I love my 'new' secondhand Quicksilver 2002 but I hate the noise it makes. I have emailed a firm about getting quieter fans but they want to know what size the existing fans are - can someone tell me please? Or at least how does one measure them? - as I can open the machine and have a look. Also any recommendations? Thanks
Hi-
Your fans are as follows:
Case fan 120mm x 25mm = 86 cfm 37 dba
PSU exhaust 80mm x 25mm = 38 cfm 29 dba
CPU intake 60mm x ??= 23 cfm 33.5 dba
As I have, just find a fan of the proper size, and necessary airflow, and replace as desired. Often times, the fans will come with 3 wires. The third, a yellow wire for speed controllers, which doesn't have to be connected. You can rewire your connectors, or use adapters, or solder directly- your choice.
The following has lots of different brands listed, for easy comparison:
http://www.performance-pcs.com/catalog/index.php?main_page=index&cPath=36&zenid= 3b5951b15677aeba573668e965e6d5a0
Sorry about the thickness on the CPU fan- you'll have to measure it (total thickness of fan cage), or, maybe someone else will post.
I have fans by Scythe, A.C. Ryan, Aerocool, and Arctic Cooling. All nice stuff, each much quieter than the origional.
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan -
How do i get a replacement fan for my imac
my CPU fan has recently gotten too loud for my confort and i want to replace it. Everytine I go to the Apple service request form and fill out all the answers, I get to a part where it states and there are no billable parts and gives me a number. I can't seem to continue from there. I want to do the replacement myself and don't want to send it in for repairs (long wait times)
P.S. I have APPLECARETry to discuss the matter with AppleCare. You can always use the online chat. Tell them your time constraints and ask them what they can do for you.
-
Replacement fans for Quicksilver 2002 800
I'm thinking of changing the following fans on my machine for quieter versions as the Quicksilver is just too loud!
Case fan, PSU exhaust, CPU intake
Which are the best to replace and does anyone know of the best fans I can use to do a direct swop? Thanks in advance.Hi-
Your fans are as follows:
Case fan 120mm x 25mm = 86 cfm 37 dba
PSU exhaust 80mm x 25mm = 38 cfm 29 dba
CPU intake 60mm x ??= 23 cfm 33.5 dba
As I have, just find a fan of the proper size, and necessary airflow, and replace as desired. Often times, the fans will come with 3 wires. The third, a yellow wire for speed controllers, which doesn't have to be connected. You can rewire your connectors, or use adapters, or solder directly- your choice.
The following has lots of different brands listed, for easy comparison:
http://www.performance-pcs.com/catalog/index.php?main_page=index&cPath=36&zenid= 3b5951b15677aeba573668e965e6d5a0
Sorry about the thickness on the CPU fan- you'll have to measure it (total thickness of fan cage), or, maybe someone else will post.
I have fans by Scythe, A.C. Ryan, Aerocool, and Arctic Cooling. All nice stuff, each much quieter than the origional.
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan -
Replacement fan for stock amd heatsink
hey to all, Anybody know of a good high cfm fan(dont care about noise) to replace a stock amd 60mm fan. also maybe what the stock fan cfm is? this is for another pc of mine. I found a all alum.evercool ( http://www.newegg.com/Product/ProductList.asp?Submit=ENE&N=2010110062+70002727+70001969&Subcategory=62&description=&srchInDesc=&minPrice=&maxPrice= ) its 23 cfm and am thinking maybe the extra metal might help out that stock heatsink. anybody have any ideas. thanks for the time Henry
HELLO, to all Well If your as cheap as I its worth a 7c drop by changing the fan on a stock amd 64 cooler. Thats almost as good as my zalman 7000b-cu cooler. I tried two different fans, a 60mm evercool rated at 25cfm, and a Tt 60cfm 80mm case blower fan (epoxied to stock plastic fan frame) the 60mm fan lower temps by about 4c at full 12v, the Tt blower got 7c lower on about half speed, ya its noisey on full but cant really hear it over any other fans on half, Then I took the stock amd fan and mounted it in the right side of my case behind the cpu & board blowing in and it dropped my mb temp by 2c, dosent stick out very much either being that it is so thin. used screen for a grill. Total cost $22.00, now idle at36c loaded 48c
-
I was wondering if I can replace the fan of my msi x800xl pci-e.
The standard fan seems very noisy, I tried to clean it, but it had no effect on noise.
Also when I play games, the fan speed up, and make much noise.
So my questions :
-> is it possible to change the fan on this kind of card ? (I know I loose warranty, but is it technicaly possible ?)
-> if possible, what fan can replace it ? (Zalman VF700, other ?)
Thanks
(and happy new year :p)Hi,
No machine with code "HP Envy DV7-us120". What is it actually ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
My fan has been making a lot of noise lately. I want to take it in and have it replaced. Where can I buy the best fan to replace the one in my notebook? I realize cleaning the existing one might work, but I've had it for 6 years and would like to be on the safe side with a working fan.
Hi Crazykarl,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion dv6835nr Notebook and needing a new fan. Here is a the part number for the fan 446521-001 or 450933-001.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Replacement fan for dv7-4141ed
I will replace the fan is there anywhone how can I do that.
This question was solved.
View Solution.Here is the user manual: http://h10032.www1.hp.com/ctg/Manual/c02642701.pdf
Go through 21, 88-92 for the replacement procedure & details.
Here's the product specs:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay?javax.portlet.begCache...
HP Part number 606575-001 is the one needed for your product fan/heat sink assembly replacement.
thanks
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP** -
Replacement fan for hp dv7 1183cl
I have a hp dv71183cl and need a relacement fan. I saw something online that said the PT# was 488885-001, bu i'm not sure. Is there anyway to verify if this is correct? Also, where can you purchase this part? Thanks
Hello jimb356, welcome to the HP Forums.
I see that you're looking for the replacement part number for the fan. I have provided the two available below, make sure your order the one for your notebook. You can locate this information on page 99 in your Maitenance and Service guide.
Description Spare part number
For use only with computer models equipped with AMD processors 488885-001
For use only with computer models equipped with Intel processors 480481-001
You can order these from the HP Part Store.
I hope this is the information you're looking for. Thank you for posting on the HP Forums.
I worked on behalf of HP.
Maybe you are looking for
-
XML Publisher report not printing German character ü properly
Hi We have a BI PU Report which gets the XML from the 10g report. When I run the report in Oracle Apps, the XML generated by the report has the correct name, but the pdf output doesnot show the correct name on it. Name (in XML file): *<FSE_NAME>Kühn,
-
Adobe 7.0 standard. Unable to find Adobe PDF resource files
When I try and convert a document to PDF it gives me this notification......What is my next step?
-
The mouse on my trackpad is not responding to my touch. The cursor is very jumpy and sometimes doesn't allow move it at all. It seems as if my cursor has a mind of it's own...what should I do?
-
Problems with the reminders app
I've been trying to set reminders on my iphone 5S to remind me on certain days about events and its saves what the event is but not the date or time or to remind me! Does anyone know how to fix this problem I have tried all the troubleshooting ideas
-
Selecting a row of h:datatable with java
hello Is there any way to set selected row in java bean for h:datatable ? in other words. how can I select a row of h:datatable with java ? regards