Replacement for Apple Cinema Tools to batch conform for overcrank?

Apologies if I am asking this question in the wrong forum. And If I am, perhaps you could refer me to the right place,.
I use it to batch conform 60 fps (shot on my 7D) to other frame rates (30, 24 etc) to achieve smooth slow motion.
I know that there are ways to conform clips one-at-a-time in After Effects.
But I am seeking a simple one-step batch conform tool that will convert like Cinema Tools.
I also tried Red-Giant grinder, however it does not recognise the files coming out of my GoPro Hereo 3+.
Is there a way to do this with Adobe's products?
Thanks.

This forum is for supporting people who have issues downloading and installing Adobe software. It sounds like you are looking for help with an application, and since you mention After Effects, maybe that would be a better place to start. After Effects

Similar Messages

If I "modify" a clips frame rate is this a permanent alteration, as in Apple Cinema Tool?

I have some footage shot at 59.97 FPS and need to interpret the frame rate at 23.98. If I do this via the "modify, interpret footage" menu options, will this permanently alter the clip? In Apple Cinema Tools, it permanently alters the footage.
Thanks!
Ed

It doesn't affect the original media.

Conforming 1080p60 to 30fps in Cinema Tools?

Hi there. I'm trying to conform 1080p 60 video converted to .mov's in clip wrap, from the sony NEXea50 to 30 fps in cinema tools, and the conform tab is grayed out. I have never had this problem with 720p60... Does cinema tools not support conforming 1080p60 to 30 or 24fps? Does Clip wrap convert frame rates at all? Thanks...

Awesome, thanks for the reply!
Hmm, what do you think is best? In the essence of time, could I just xcode the original PAL 50fps 720 clips to pro res, conform to 25fps and work them into the XDCAM project sequence I've already started? Or will that create serious workflow issues for me? I don't have time to go back and re-xcode every clip (almost 100 GBs) to Pro Res before I show the client a rough edit.
Also, if it is better to just take the hit on time and re-xcode every clip to Pro Res, would I be able to easily reconnect all media to the newly coded ProRes files? Or would I lose all that work in the sequence?
Thanks again for the info!

Overcrank in camera or conform in cinema tools for smoothest footage

got the ex1, wondering what would give the best results.....shoot 24f and overcrank to 60 in camera, or shoot 60p and conform to 24p in cinema tools......any ideas?
thanks!

What's an ex1? There are only about two thousand video cameras that will talk to FCP.
"Smooth" is a relative term and you haven't told us what you think you're going to accomplish by "overcrank." One only overcranks to achieve slow motion and, even if you're post-processing, more discrete slices of time are always better.
bogiesan

Where can I purchase a Logic Board for a 24" Apple Cinema Display?

My 24" Cinema Display started to flicker and black out shortly after I purchased my most recent MacBook Pro. Apple felt that the issue was the MacBook Pro so they replaced it. The problem continued so they suggested I take the Cinema Display to the Genius Bar. The display was out of warranty and the Apple Genius felt the issue was a bad display even after I told him I smelt silicon burning just before it went out completely. He said that he could "depot" the unit and have it repaired for ~$600. Due to the high cost of repair, I chose to purchase a new Thunderbolt Display instead. Recently, I opened the old Cinema Display and found that the Logic Board is fried. I have ordered a new board from 2 different Web retailers. Both accepted the purchase as "in stock" but then stated they could not get the board from Apple. Where can I purchase the Logic Board for a 24" Apple Cinema Display?
Many thanks!

I was very interested to read this document. I think there is a problem with the Cinema Display and that it is frying the computer.
My husband bought each of us a macbook pro. His was hooked up to the cinema display. After about a year, his MBP started to suffer intermittent failures where it would suddenly shut off and have to be hard rebooted. After 2 years, the power or logic board on his MBP completely failed. He bought a new MBP and a Thunderbolt display, and I inherited his Cinema Display for use with my original MBP.
After one month of use with the cinema display, my MBP started to have the same problems. It has to be hard rebooted almost every time I disconnect or reconnect with the cinema display. I went to the Genius bar, and they confirmed that my MBP logic board needs to be replaced; I'm just holding out until spring break to take it back in, as they say it may take a week. Fortunately, I have AppleCare for my MBP.
Our cinema display is 3-4 years old, but it looks like, even though it appears to be working, I should probably get rid of it. I can't keep frying computers!
I'm posting this because I'm wondering how many others are experiencing this problem.

Can't Conform Red footage through Cinema Tools?

Hi there, need advice.
I can't conform off line Prores footage with original R3D files.
1. I created database by dropping the hard drive ikon with original Red footage into Cinema Tools. Cinema Tool creates the file with extension .ctdb (cinema tools data base)
2. From FCP I exported EDL of my project/sequence.
3. Then, I opened Color and imported EDL,
4. New window pops up and asks for database file.
5. Choosed database.
6. Color loads the cuts into timeline but it *doesn't connect/import* original R3D files. Why?
What am I doing wrong?
Also, I did this workflow before successfully but for some reason it doesn't work now.
Many thanx,
ps
Color 1.5.2
REDCODE 4.2
footage shot with build 21
frame size 4096x2304

Never mind.
Step 4 and 5 was not necessary. I guess Color remembers database from previous projects.

Conforming 60fps to 25fps in FCP X without Cinema Tools

Hi,
I want to conform 60fps (and / or 50fps) footage to 25fps.
Unfortunately FCP X does not have Cinema Tools so I can’t conform it (as per the days of FCP 7).
In FCP X I am currently using the ‘conform speed’ function but am getting unsatisfactory results.
Is there another way to conform 60fps to 25fps?
I’ve tried:
Mpeg Streamclip,
Handbrake,
Compressor,
and Xilisoft.
None seem to work!
Please help!

Thanks for your help Tom. Yes am fully aware 60fps should conform to 30fps (and 50 to 25).
What I find unsatisfactory is the smoothness and resolution. My 60fps and 50fps conformed footage through Cinema Tools was far superior.
So..... onto a solution:
I've tried Handbrake, Compressor, Mpeg Streamclip and Xilisoft:
In the above applications I've changed the various FPS boxes to "25" (fps) but it hasn't made any difference!
Is there something I'm doing wrong?

What does this cinema tools is for?

How and when can I use this program?
What is for?
Sorry for the no knowing...

See this article and Apple's product page for an explanation of the Cinema Tools software.
(19256)

Can anyone refer me to a good repair facility for an Apple Cinema HD Display 23 in? Like other displays of this model, it has an internal short that causes a flickering display.

For several years I have had a flickering or black display problem with my Apple Cinema HD Display 23 inch, model M9178LL/A. Like other displays of this model production it has an internal short that causes the flicker and burns out power adapters. I ahve taken it to the Apple store several times and they just kept selling me replacement power adapters instead of fixing the short. At my recent visit, they told me that they no longer support this model and that I have to find a third party repair facility.
Can anyone refer me to a reputable location who can do the correct repair. There are discussions on the Internet how to work around the short problem with electrical tape on the middle connector pins, or how to open the display to fix it myself, but I do not have the eyesight, skills or equipment to do this correctly.
Thank you.

In continuing my research on this topic, I found this article:
http://support.apple.com/kb/TS5198
Short version, the 23" Cinema HD is among one of several older "vintage" Apple displays that are no longer supported under Mavericks. No brightness control, and it's likely to not work reliably at all. I can't say why I was able to use it for as long as I did with no problems. I take all this to mean that the display itself works fine, but not with my new MBP Retina.
Though a tempting excuse to spend another grand on a 27" Apple Thunderbolt display, I opted for a $250 HDMI monitor from Fry's instead.

Where i can get replacement for my cinema display 65W power adapter?

Hi, who can tell me where i can get replacement for my cinema display 65W power adapter?

If the display uses the Apple Display Connector (ADC)
<http://upload.wikimedia.org/wikipedia/commons/thumb/0/09/AppleDisplayConnector.j pg/800px-AppleDisplayConnector.jpg>
you will need a DVI to ADC adapter.
<http://www.welovemacs.com/mb571zla.html>
They are also available on eBay.
<http://www.ebay.com/itm/Apple-DVI-to-ADC-adapter-A1006-for-Apple-LCD-monitors-Mi nt-Condition-/251073546040?pt=US_Video_Cables_Adapters&hash=item3a75264738#ht_50 0wt_1089>

Can I use an Apple Cinema Display as a second monitor for my iMac?

I have a new 24" intel iMac and was wondering if I could use my old 20" Apple Cinema Display (aluminum) as a dual display. What cables do I need?

Just had a good look inside my box and nothing. Maybe it's a Apple UK thing
The back of my iMac does have a Mini DVI port so I'm gonna pop down the Apple store tomorrow morning to pick one up.
Thanks for the advice, I'll let you know if I'm successful.
Message was edited by: genpro

I could not get my iPhone 5 which purchased in Australia repaired by apple in the US. Guys from apple retail store verified a replacement for me and asked to call apple care. However, apple care said they cannot get it fixed nor repaired.

My iPhone 5 got some defects and I went to a apple reatil store yesterday. The guy from the genius bar told me that he verified a replacement for me. And I need to call 1-800-apple care to finish that process. I called apple care and one of the senior supervisors told me that I have to send it back to Australia (where I bought this iPhone) to get it repaired. Turns out I could not solve the problem after a apple store vist and several calls. I just want to know if there any way to solve this. This iPhone is a factory unlocked one that purchased in an apple retail store in Melbourne at the day it was first released. And my experience today is not what I can tell as fair. I will be really appreciate for any helps and advices. Thanks.

Warranty on iPhone is not international, but valid only in country of
original sale. Since you purchased the iPhone in Australia, your warranty
is valid only in Australia. You must either personally return the iPhone
to Australia for evaluation and possible replacement or sent it to someone
in Australia to take into Apple for the evaluation. Apple will not accept
international shipments for repair nor will Apple ship out of the country
after replacement.
Sorry to be the bearer of this news, but it is the way iPhone warranty and
replacement has always worked.

Is Apple about to introduce a replacement for iWeb?? and where can I download iWeb to replace the one I lost??

Having spent a little time searching for a replacement download for iWeb (details of why below) it seems that I cannot find it anywhere in Apple Land. From my limited experience here (iphone, macbook pro, airport extreme and airport express) it looks like Apple gradually withdraws stuff prior to introducing something really exciting to replace it.
So
Question:   Is there a new super replacement for iWeb about to be introduced?
I cannot believe that Apple would take away something as great as iWeb (having read reviews and used it myself as a complete web novice) without giving us something better.
I foolishly followed some genius advice and did a wipe/reload of Lion, prior to updating to Mountain Lion (my fault, I thought my lovely Macbook Pro was running a little slow - probably wasnt - just me being impatient.) Anyway, long story short, I lost iphoto (got it back by re-purchasing but would like a refund - another string running with this),   iWeb - can't find it anywhere - asked questions here in Apple Land and am getting some conflicting answers.
I am sat in London without my iweb for a some days and would really like to get on with a bit of web stuff.
Question: is there anywhere in Apple Land where I can download iWeb
Question: can you confirm that the iweb programme will be on one of the disks that came with the machine?   (they are 100 miles away so I will have to wait, unless there is an easier way)
Sorry, rambling a bit.
Hope you can help out there
Thanks
Steve

The iWeb application was specifically created to be used with .Mac and then MobileMe and Apple withdrew support for iWeb several months ago, when it was announced that MobileMe would be no longer and would be replaced by iCloud. MobileMe ceased at the end of June this year and has been replaced by iCloud, that does not offer web hosting, so no need for iWeb.
Apple stopped selling iWeb in its stores several months ago and has withdrawn support for iWeb, so no, you won't find either iWeb or iDVD for sale in the Mac App Store because Apple no longer sells it.
You cannot download iWeb, so if you want iWeb, you will have to purchase the iLife 11 boxed set from Amazon and this contains iWeb 09 which is the latest version of iWeb. Apple does not sell this either.
If your Mac was running Snow Leopard, then it would have come with installation CD's, so yes, you should be able to re-load the whole of the iLife series, which includes iWeb, iDVD and iPhoto back onto your Mac running Mountain Lion. You did not need to make an additional purcahse of iPhoto from the Mac App Store - you could have re-loaded from these CD's. The only place you will get a refund is by contacting the Mac App Store. Nobody here can help you with that.
So if you want iWeb back, check to see if it is on you installation CD's - it should be if you have a Mac running Snow Leopard and put it back on your Mac from there. If not, then your only option is to purchase the iLife 11 boxed set from Amazon and you can load iWeb from there.
As Apple no longer supports iWeb and there is no MobileMe any longer, then there are unikely to be any further updates to the programme and nothing else will come along. You can still use the app though if you have it and it works with Mountain Lion, however, there may come a time when it won't work with future iOS updates, so it would pay you to look at the alternatives out there which are many and varied. Take a look at RapidWeaver, Sandvox, Freeway Pro/Express, Flux 4 etc. You can download free trials of most and some are for sale in the Mac App Store.
Also, please be advised that this is a user to user forum and everyone here who replies to you is a user, so you are not talking directly to Apple here.
Give Apple feedback directly by going to http://www.apple.com/feedback.

Hello everyone, hoping for some help with my new Apple Cinema Display 20"

Hi everyone, I bought an Apple Cinema Display 20 inch LCD monitor, just about 3 weeks ago. I have two issues I am hoping to get some help with.
1) I am using the screen on a PC with Windows XP, and I was very disappointed at the lack of PC support. I have no on screen display (OSD), so I can't see what percentage I have my brightness set to, and I can't alter the colour or contrast of the display, etc. Luckily it defaulted to very good settings, but I would really like to be able to use the (fan made?) program called "WinACD". If I would be best asking somewhere else, please direct me there. If not, my problem is that I installed it added the "Controls" tab, but it just says, Virtual Control Panel "None Present". I have tried googling for an answer, and I have seen many suggestions, but none of them worked. I installed the WinACD driver without my USB lead plugged in, and someone said that was important. So I have tried uninstalling, rebooting, then reinstalling it again with the USB plugged in, and a device plugged in to my monitor to be sure. It didn't seem to help. I have actually done this process a few times, just to be sure. So I would really like to get that working if possible.
2) I am disappointed at the uniformity of the colour on the display. I have seen other people mention this (again, after a google search), and that someone seemed to think it is just an issue we have to deal with, with this generation of LCD monitors. Before I bought this screen, I had an NEC (20wgx2), and it had a very similar issue. Most of the time, you cannot see any problem at all, but if you display an entire screen with a dark (none prime) colour, like a dark blue green colour, you can see areas where it is slightly darker than others. It was more defined on the NEC screen, and that is why I returned it. I now bought this Apple Cinema Display, because it was the only good alternative to the NEC. (It has an 8bit S-IPS / AS-IPS panel, which was important to me). But the problem exists in this screen too. It isn't as bad thankfully, but it still exists... I have actually tried a third monitor just to be sure, and the problem existed very slightly in that one, so I think I am probably quite sensitive in that I can detect it.
It is most noticable to me, because I do everything on this PC. I work, I watch films, and I play games. 99% of the time, I cannot see this problem. But in some games (especially one)... the problem is quite noticeable. When you pan the view around, my eyes are drawn to the slight areas on my screen which are darker, and it ruins my enjoyment. To confirm it wasn't just the game, like I said, I can use a program to make the entire screen display one solid colour, and if you pick the right type of colour (anything that isn't a bright primary colour), I can see the problem - albeit fairly faintly.
I am pretty positive that it is not my graphics card or any other component of my PC, by the way, because everything is brand new and working perfectly, and the graphics card specifically, I have upgraded and yet the problem remains - even on the new card. Also, the areas that are darker, are different on this screen than on the other screens I have used.
So basically, I would like to register my disappointment at the lack of perfect uniformity on a screen which cost me £400 (over double what most 20 inch LCD screens cost), and I would like to know if anybody could possibly suggest a way to fix it?
It is upsetting, becuase although this problem exists on other screens too, this is, as far as I know, the most expensive 20" LCD monitor available today, and uses the best technology available too.
p.s. If anyone would like to use the program that lets you set your entire PC screen a specific colour, it is called "Dead Pixel Buddy", and it is a free piece of software, made by somebody to check for dead pixels. But I found it useful for other things too, including looking at how uniform the colour of the screen is. That's not to say I was specifically looking for this problem by the way... the problem cought my eye.
Thanks in advance!
Message was edited by: telelove

I've been talking about this on another forum too, and I made some pictures in photoshop to describe the problem. Here is what I posted on the other forum:
Yes, "brightness uniformity" definitely seems to be the best description of my issue.
Basically it just seems like there are very faint lines down the screen, that are slightly darker than the other areas on the screen. They aren't defined lines, and they aren't in a pattern. It's just slight areas that are darker, and the areas seem like narrow bands/lines. Usually you can't see it, but in some cases, it is quite noticeable. It is mainly when I'm playing a game. The slightly darker areas are not visible, and then when the image moves (because I am turning in a car, or turning a plane, or turning in a shooter etc.) the image moves, but these slightly darker areas stay still, and that makes them really stand out.
As for how it looks, I tried to make an example in photoshop:
Original Image:
http://img340.imageshack.us/img340/3045/td1ja9.jpg
Then imagine turning the car around a bend, and then it looks like this:
http://img266.imageshack.us/img266/959/td2hq7.jpg
It's those lines in the clouds. If you can tab between the two images, you can see the difference easily. Imagine seeing those lines appear, every single time you move in a game. (I haven't tested this in movies yet, but I am assuming it's the same).
It isn't very clear on a static image. But when the image moves, the darker areas stay in the same place and it draws your eyes towards them. It isn't terrible, but it is annoying, especially consider how much this screen cost.
Message was edited by: telelove

My wife's new iphone4 (a replacement for a 5 month-old iphone 4 with home button issues) is not recognized by itunes. Every other ios device in the house using that computer and Apple ID is. Any suggestions?

My wife's brand new iphone4 (which was a replacement for a 4month-old iphone4 with home button issues) is not recognized by itunes. Every other ios device on the computer/Apple ID in question is recognized and syncs perfectly. Any suggestions?

If the new phone has already been setup, make sure the phone and iTunes are both set to the same account.
You might also have to authorize this computer for the new device under the store menu.

Replacement for Apple Cinema Tools to batch conform for overcrank?

Similar Messages

Maybe you are looking for