Replacement for OVI Share when using iWeb

I'm busy migrating all my iWeb / MobileMe sites to HE but I have received an e-mail from Nokia advising that OVI Share is being discontinued on May 30. I use this service (as recommended in this forum a long time ago) to create rolling banners of photos. Can anyone recommend an alternative service - free or paid that does this simply.
Many thanks.

Note that you can also create a "banner" in apps such as iPhoto and Keynote and export to QuickTime.
Create a fixed timing slideshow, export and use one of the many different ways to implement a movie on a web page...
http://www.iwebformusicians.com/Website-Movie-Video/Player-Showcase.html

Similar Messages

[svn:fx-trunk] 10545: Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts

Revision: 10545
Author:   [email protected]
Date:     2009-09-23 13:33:21 -0700 (Wed, 23 Sep 2009)
Log Message:
Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts
QE Notes: 2 Mustella tests fail:
components/DataGrid/DataGrid_HaloSkin/Properties/datagrid_properties_columns_halo datagrid_properties_columns_increase0to1_halo
components/DataGrid/DataGrid_SparkSkin/Properties/datagrid_properties_columns datagrid_properties_columns_increase0to1
These fixes get us to measure the embedded fonts correctly when going from 0 columns to a set of columns so rowHeight will be different (and better) in those scenarios
Doc Notes: None
Bugs: SDK-15241
Reviewer: Darrell
API Change: No
Is noteworthy for integration: No
tests: checkintests mustella/browser/DataGrid
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-15241
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/DataGrid.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridBase .as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridColu mn.as

Hi Matthias,
Sorry, if this reply seems like a products plug (which it is), but this is really how we solve this software engineering challenge at JKI...
At JKI, we create VI Packages (which are basically installers for LabVIEW instrument drivers and toolkits) of our reusable code (using the package building capabilities of VIPM Professional). We keep a VI Package Configuration file (that includes a copy of the actual packages) in each of our project folders (and check it into source code control just as we do for all our project files). We also use VIPM Enterprise to distribute new VI Packages over the network.
Also, as others have mentioned, we use the JKI TortoiseSVN Tool to make it easy to use TortoiseSVN directly from LabVIEW.
Please feel free to contact JKI if you have any specific questions about these products.
Thanks,
-Jim

Choose accent color for hovered icons when using dark interface in Bridge?

How about add the ability to choose the accent color for hovered icons when using a dark interface in Bridge? Currently, the icon color remains orange and unchangeable. Personally, I would prefer a blue accent color to match my system. Any chance of making this possible in CS6?

Oh, I should add that I'm looking for solutions somewhat up-to-date and/or are related to or designed for 10.6 Snow Leonard. I did a search for answers before asking the question, and the (mostly unsatisfactory) answers I found were all from several years ago and applied to earlier versions of OSX (10.3, 10.4, etc.), and therefore no longer were relevant or usable.

What can replace Appleworks Drawing app when using OSX Mountain Lion?

What can replace Appleworks Drawing app when using OSX Mountain Lion?

Please see this page which examines the problem:
http://www.wilmut.webspace.virginmedia.com/notes/aw/page3.html

Any solution for 4280 error when using Itunes to burn CDs?

Any solution for 4280 error when using Itunes to burn CDs?

http://support.apple.com/kb/TA38101?viewlocale=en_US

What is a valid location for autorecovery files when using Word for MAC?

What is a valid location for autorecovery files when using Word for MAC?

Microsoft Word for Mac support forums is probably a better place to ask.

HT1947 Why can't I see all songs for an artist when using iPad remote for home sharing music through apple tv.

Why can't I see all my songs for an artist when I search by artist using iPad remote? I'm listening to music via home sharing through apple tv using iPad 2 as my remote. All my songs seem to be listed fine under "songs", but when I select "artist" many of the songs I have for that artist are not there, any idea why that is or how I can fix this.....I suspect it's because many songs may not be associated with an album and it seems only songs in albums are displayed when I search by artist.

Thanks Ferretbite, but that's not the issue in my case, the songs are not part of a compilation. I just checked several of them and the "Part of a compilation" box is unchecked.....it seems as if the song does not have an album associated with it, it will not display under the artist when I search by artist on the iPad remote which REALLY stinks.
Hope someone else might have a solution.

Blank screen for few seconds when using "bright applications"

Hi
I have my MSI GF5600 VTDR256 for almost a year now and still facing the same problem (after various driver updates still existing :-( )
When I use application with a lot of bright colors, like Apple iTunes for example, the screen goes blank for 2 or 3 seconds and then returns to my application. Sometimes the screen isn't built up like it should be (pieces of text unreadable, desktop showing "through" some parts of the application). Problem also occurs when quickly scrolling websites with a lot of white in it.
I connected my Philips 170B4 17" TFT using a DVI cable to the MSI card. Don't know whether the problem occurs when using a VGA cable to connect my monitor.
The following screenshot illustrates how my screen looks after having another blank screen:
Somebody any suggestions?

I recently reinstalled my computer, so I started with the latest driver at that moment and the problem occured.
I have a 400 Watt dual fan power supply feeding:
- Gigabyte GA-7VRXP Mainboard
- 1024 MB PC2700 memory
- MSI FX5600 VTDR256
- 1 onboard RAID controller with two 20 GB Harddisk RAID 1
- 2 additional harddisks
- Sound Blaster Live Drive
- Plextor PX2410
- Plextor PX708A
- Floppy drive
- LeadTek TV Card (2000/Expert)

Need advise for best practice when using Toplink with external transaction

Hello;
Our project is trying to switch from Toplink control transaction to using External transaction so we can make database operation and JMS operation within a single transaction.
Some of our team try out the Toplink support for external transaction and come up with the following initial recommendation.
Since we are not familar with using external transaction, I would like member of this forum and experts, to help comment on whether these recommendation are indeed valid or in line with the best practice. And for folks that have done this in their project, what did you do ?
Any help will be most appreciated.
Data Access Objects must be enhanced to support reading from a TOPLink unit of work when using an external transaction controller. Developers must consider what impact a global transaction will have on the methods in their data access objects (DAOs).
The following findSomeObject method is representative of a finder in the current implementation of our DAOs. It is not especially designed to execute in the context of a global transaction, nor read from a unit of work.
public findSomeObject(ILoginUser aUser, Expression queryExpression)
ClientSession clientSession = getClientSession(aUser);
SomeObject obj = null;
try
ReadObjectQuery readObjectQuery = new ReadObjectQuery(SomeObject.class);
readObjectQuery.setSelectionCriteria(queryExpression);
obj = (SomeObject)clientSession.executeQuery(readObjectQuery);
catch (DatabaseException dbe)
// throw an appropriate exception
finally
clientSession.release();
if (obj == null)
// throw an appropriate exception
return obj;
However, after making the following changes (in blue) the findSomeObject method will now read from a unit of work while executing in the context of a global transaction.
public findSomeObject(ILoginUser aUser, Expression queryExpression)
Session session = getClientSession(aUser);
SomeObject obj = null;
try
ReadObjectQuery readObjectQuery = new ReadObjectQuery(SomeObject.class);
readObjectQuery.setSelectionCriteria(queryExpression);
if (TransactionController.getInstance().useExternalTransactionControl())
     session = session.getActiveUnitOfWork();
     readObjectQuery.conformResultsInUnitOfWork(); }
obj = (SomeObject)session.executeQuery(readObjectQuery);
catch (DatabaseException dbe)
// throw an appropriate exception
finally
if (TransactionController.getInstance().notUseExternalTransactionControl())
     session.release();
if (obj == null)
// throw an appropriate exception
return obj;
When getting the TOPLink client session and reading from the unit of work in the context of a global transaction, new objects need to be cached.
public getUnitOfWork(ILoginUser aUser)
throws DataAccessException
     ClientSession clientSession = getClientSession(aUser);
     UnitOfWork uow = null;
     if (TransactionController.getInstance().useExternalTransactionControl())
          uow = clientSession.getActiveUnitOfWork();
          uow.setShouldNewObjectsBeCached(true);     }
     else
          uow = clientSession.acquireUnitOfWork();
     return uow;
}

As it generally is with this sort of question there is no exact answer.
The only required update when working with an External Transaction is that getActiveUnitOfWork() is called instead of acquireUnitOfWork() other than that the semantics of the calls and when you use a UnitOfWork is still dependant on the requirements of your application. For instance I noticed that originally the findSomeObject method did not perform a transactional read (no UnitOfWork). Has the requirements for this method changed? If they have not then there is still no need to perform a transactional read, and the method would not need to change.
As for the requirement that new object be cached this is only required if you are not conforming the transactional queries and adds a slight performance boost for find by primary key queries. In order to use this however, objects must be assigned primary keys by the application before they are registered in the UnitOfWork.
--Gordon

"No enought room on startup disk for Application Memory" when using the Accelerate Framework

Dear colleagues,
I am running what I know is a large problem for a scientific application (tochnog) a finite element solver that runs from the Terminal. The application tries to solve 1,320,000 simultaneous linear equations. The problem starts when I use the Accelerate Framework as the Virtual Memory size jumps from 142 G to about 576 G after the library (LAPACK) is called to solve the system.It does not do it if I use a solver that does not calls LAPACK inside Accelerate.
The machine is a mac pro desktop with 8 GB of ram, the 2.66 GHz Quad-core Intel and the standard 640 GB hard drive. The system tells me that I have 487 GB available on hard drive.
The top instruction in Terminal reads VM 129G vsize when starting. When I run the finite element application once the LAPACK library in the Accelerate framework gets called, the Virtual Memory (VM) jumps to 563 G vsize.
After a short while, I get the "No enought room on startup disk for Application Memory error"
This is a screen capture of the application attempting to solve the problem using the LAPACK library inside the Accelerate framework: Here are the numbers as reported by the activity Monitor.
Tochnog Real Memory 6.68 GB
System Memory Free: 33.8 MB, Wired 378.8 MB, Active 5.06 GB, Inactive 2.53 GB, Used 7.96 GB.
VM size 567.52 GB, Page ins 270.8 MB, Page outs 108.2 MB, Swap used 505 MB
This is a screen copy of the same application solving the same problemwithout using the Accelerate framework.
Tochnog Real Memory 1.96 GB,
System Memory Free: 4.52 MB, Wired 382.1 MB, Active 2.69 GB, Inactive 416.2 GB, Used 3.47 GB.
VM size 148.60 GB, Page ins 288.8 MB, Page outs 108.2 MB, Swap used 2.5 MB
I can not understand the disparity in the behavior for the same case. As I said before, the only difference is the use of Accelerate in the first case. Also, as you can see, I thought that 8 GB of ram memory was a lot.
Your help will be greatly appreciated
Best regards,
F Lorenzo

The OP had posted this question in the iMac Intel forum.
I replied along similar lines, but suggested he repost this in the SL forum where I know there are usually several people who have a far better grasp of these issues than I.
I would be interested in getting their take on this.
Although, I think you are coming to the correct conclusion that there are not enough resources available for this process, I'm not certain that what you are saying on the way to that conclusion is correct. My understanding of VM is that it is the total theoretical demand on memory a process might make. It is not necessarily the actual or real world demand being made.
As such, this process is not actually demanding 568GB (rounded.) As evidence of that, you can see there is still memory available, albeit quite small, in the form of free memory of 33.8MB and inactive of 2.53GB (the GB for that figure, above, seems like it might be a typo, since for the process when not using Accelerate the reported figure for inactive was 416.2 GB -- surely impossible) and 7.96GB used. The process, itself, is using 6.68GB real memory.
In addition, I question whether the OP has misstated the 487GB free drive space. I think that might be the total drive capacity, not the free space.
My guess is that it is the combination of low available memory and low free drive space prompting this error.
From Dr. Smoke on VM:
it is possible that swap files could grow to the point where all free space on your disk is consumed by them. This can happen if you are very low on both RAM and free disk space.
https://discussions.apple.com/message/2232469?messageID=2232469&#2232469
This gets more to the actual intent of your question...
EDIT: Looks like some kind of glitch right now getting to the Dr. Smoke post.
Message was edited by: WZZZ
<Hyperlink Edited by Host>

Performance Impact for the Application when using ADFLogger

Hi All,
I am very new to ADFLogger and I am going to implement this in my Application. I go through Duncan Mill's acticles and got the basic understanding.
I have some questions to be clear.
Is there any Performance Impact when using ADFLogger to slower the Appllication.
Is there any Best Practices to follow with ADFLogger to minimize the negative impact(if exists).
Thanks
Dk

Well, add a call to a logger is a method call. So if you add a log message for every line of code, you'll see an impact.
You can implement it in a way that you only write the log messages if the log level if set to a level which your logger writes (or lower). In this case the impact is like having an if statement, and a method call if the if statement returns true.
After this theory here is my personal finding, as I use ADFLogger quite a lot. In production systems you turn the log lever to WARNING or higher so you will not see many log messages in the log. Only when a problem is reported you set the log level to a lower value to get more output.
I normally use the 'check log level before logging a message' and the 'just print the message' combined. When I know that a message is printed very often, I first check the level. If I assume or know that a message is only logged seldom, I just log it.
I personally have not seen a negative impact this way.
Timo

Report for cost centers when using MVT 261

Guru's,
Most of the request for material for our storerooms are done through a work order and issued out using MVT 261. We're trying to find a report that shows the cost centers used when using MVT 261. I've tried using MB51 and MVT 261 but no cost centers populate. When I use MB51 and MVT 201 for reservations created manually there's no problem, all cost centers are populated.
Thanks
Eric

Hi,
The movement 261 is for Issue to Order & no issue to Cost Center, hence you have the problem.
You will get only the order number is case of 261.
Regards,
Prashant

How to populate column titles for y values when using Write to Measurement File Express VI with a tab delimited text-based .lvm file?

The .lvm file generated by the Write to Measurement File Express VI includes column heading titles for the y values, but they are a default value of "untitled". See attached example of a sample file when opened in Excel, the values in question are highlighted. Is there a way to specify the column titles when the file is written?
This is a similar question to this posting, which received a work around response to use the Write to Spreadsheet File.vi, rather than a solution when using this VI.
Message Edited by Hightop Raven on 05-02-2007 03:37 PM
Attachments:
column_titles.gif ‏13 KB

Sorry for the late reply. I was out of the office Friday.
You can do it, but the code can get rather ugly. Under the hood, the dynamic data type (the dark blue wire) is an array of waveforms. In your case, the scalar values you convert to a dynamic data type are being converted to an array of waveforms, each waveform having one element. You have two options.
Explicitly convert your scalars to one-element waveforms (t0=0, dt=1) and add the title before conversion to a dynamic data type.
Convert your dynamic data type to an array of waveforms and loop through them to add the column labels. The conversion blocks are in the Signal Manipulation Express palette.
I would recommend 2, since it is the easiest to add. It is also the easiest to run only on the first iteration. Just put a case selector around the loop, wire the selection to the While loop iterator, and set the case containing the label code to 0. The default case simply passes through the dynamic data.
My apologies for not including a screen shot. I am in the process of upgrading my machine and can't run LabVIEW. If you need one, let me know and I can post one tomorrow.
This account is no longer active. Contact ShadesOfGray for current posts and information.

Problems with the ActiveX bridge for Java beans when using third-party .jar

I encountered the following problem when using the ActiveX bridge for a java bean:
I am using JDK 1.4.2_09 and MS Visual Basic 6.0 (SP6). I wrote a java bean called ProcessViewer (my class ProcessViewer inherits from JComponent and implements the interfaces Serializable and AdjustmentListener) which I would like to use within a VB 6.0 application. I used the ActiveX bridge (packager.exe) to generate a DLL (ProcessViewer.dll) and registered it successfully. The java bean GUI-control works fine within my VB 6.0 application unless my java bean (ProcessViewer.jar) uses any third-party .jar files.
But when I tried to add a reference to some third-party class (com.sap.xxx.xxx....) I got some problems. I could solve the problem with packager.exe by setting the correct CLASSPATH. But at runtime my VB 6.0 application does not work. It crashes or it reports an error like this: "The control ... could not be loaded from axbridge.dll" (although I deployed my .jar file correctly to the directory C:\Programme\Java\j2re1.4.2_09\axbridge\bin and lib). Setting the CLASSPATH environment variable before calling my VB 6.0 application (exe) did not solve the problem.
How can I teach my VB 6.0 application (containing the Java bean ActiveX control) where to find the third-party .jar file? Copying the third-party .jar file to the JRE lib-folder or to the axbridge\lib folder did not solve the problem either.
I studied the documentation about the ActiveX bridge given at:
http://java.sun.com/j2se/1.4.2/docs/guide/beans/axbridge/developerguide/index.html
but I am missing informations on how the third-party .jar files can be found during runtime of the ActiveX container (e. g. a VB 6.0 application).

See how to solve your problem with JNI:
http://codeproject.com/cpp/OOJNIUse.asp
More examples (for SWING) in tools setup:
http://www.simtel.net/product.php[id]95126[SiteID]simtel.net
http://www.simtel.net/product.php[id]94368[SiteID]simtel.net
http://www.simtel.net/product.php[id]93174[SiteID]simtel.net

Does it charge you for GPS connection when using t...

I have an N73, my tomtom software and bluetooth gps reciever are on the way.
Will it charge me for using tomtom by the minuete when usung 02 pay and go or not?
The prices for using the internet on my phone are rediculus so hopefullly not.
I assume when using it for a journey it wont be costing me by the minuete to have my tomotm telling me directions via my phone?
Could anyone answer this question please
Thanks

No it won't cost you anything while you are using TomTom. BUT if you sign up for Traffic which warns you of holdups, accidents etc it will cost about £40 a year payable to TT and any fees payable to 02 for downloading data every quarter of an hour or so. The GPS connection is via Bluetooth so it costs the same as running an earpiece ie nowt! You may well be able to run them at the same time.

Replacement for OVI Share when using iWeb

Similar Messages

Maybe you are looking for