Replacement iMac A1058 17" Hard-Drive

Hi guys. About 2 years ago my iMac began malfunctioning on start-up; A few clicking noises, and then to a folder with a flashing question mark. I was going away for uni at the time, so didn't do anything about it, leaving the problem until I got home.
Once back, the iMac started working perfectly again, in fact faster than before. This lasted for around 2 months until, lo and behold, the same thing happened again. After scurrying around the internet trying to pick up what might be wrong, I've finally come to the conclusion that it may be a hard drive fault that I can't fix. I tried pressing D on start up and scanning for problems, as well as inserting the OS X installation DVD (which got as far as choosing a volume, with no option to pick).
I know nothing about hard-drives, but I've decided to take the risk of inserting it myself, against my better judgement. I was wondering if any of you guys could offer any advice on what hard-drives to go for. I don't really care about huge capacity, just something average and, if possible, in a nice price range. I tried looking around myself, but am worried about the prospect of buying one that doesn't fit/work.
Thanks very much guys, any help on the problem itself would be much appreciated also, though I suppose it's something that's been explained into the ground already.

Cheers for the heads up.
Once It was working, the mac itself was in a pretty good way. It seems to me to be worth it, just to have another computer in the house! I know six years is a life-time for most computers, but if I use this for mostly media etc, I don't see why it can't go another two or three years!

Similar Messages

My iMac Seagate 1T hard drive crashed. I replaced it with a Western Digital 1T hard drive. Where can I get the Lion OS?

My iMac Seagate 1T hard drive crashed. I replaced it with a Western Digital 1T hard drive. Where can I get the Lion OS?
The iMac comes up with a ? in a folder, even after starting with Option/Command/R keys pressed.
Please help.

Call Apple to purchase replacement discs or order a copy of Snow Leopard from Apple's Online Store. Follow these instructions:
Drive Preparation and Install Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. When completed quit DU and return to the installer. Install Snow Leopard. Once you boot from Snow Leopard you should open Software Update and install all the available updates required. After you complete this and restart the computer open the App Store application in the Dock or Applications folder.
8. Sign into the App Store with your Apple ID and password. Purchase and download Lion.
9. After Lion's installer downloads, install Lion.

Replacing my iMac 1TB Seagate Hard Drive

I have to replace my iMac 1TB Seagate Hard Drive. I need to use Time Machine to restore my Mac- anyone have a step by step procedure to complete this?

Welcome to the Apple Support Communities
When you get your Mac after Apple has replaced its hard disk, they can give it to you with a blank hard disk or with Lion installed. I recommend you to make a clone with Carbon Copy Cloner instead of the Time Machine backup. It will make shorter the process of reinstalling everything again.
If it has got Lion installed:
1. Press Command and R keys while your Mac is starting and open Disk Utility.
2. Select Macintosh HD in the sidebar and go to Restore tab.
3. Drag your external disk to Destination box and press Restore.
4. When the restore finishes, restart your Mac.
If the hard disk is blank, it depends if you bought your Mac with Snow Leopard or Lion. If you bought it with Lion, do the same but pressing Command, Option and R keys. If you bought it with Snow Leopard:
1. Insert the OS X disc and press C key when your Mac starts.
2. Go to Utilities > Disk Utility and select Macintosh HD in the sidebar.
3. Go to Restore tab, drag the external disk to Destination box and press Restore

My computer is part of the iMac 1TB Seagate Hard Drive replacement program. What is the best external modem to use in order to back up my files prior to me dropping off my computer.

My computer is part of the iMac 1TB Seagate Hard Drive replacement program. What is the best external modem to use in order to back up my files prior to me dropping off my computer.

As Babowa says, get an external disk. You should have one for normal backups anyway.
Actually, I'm a strong fan of having multiple backups. 3 copies including the original, 2 different backup formats, and 1 backup off-site.
And when you have your iMac in for service, if you have just 1 backup at that point in time you have just 1 copy of your data. I get paranoid about my data.
But if you are just making 1 backup, I would use SuperDuper (free for a full clone, and extremely good software, as is Carbon Copy Cloner, but it is not free anymore).
And then I would "Boot" from the clone, to make sure it was a good clone.
Booted from the clone, I would then use Applications -> Utilities -> Disk Utility to zero the original disk, as suggested by Babowa, so that when they replace the disk, the original disk containing your data is not in the hands of strangers. A single pass of zeros is more than good enough as an erase, as the chances are no one is going to spend the money needed to try and read the erased data. It is not like you have any super secret data, just stuff you do not want the casual data theif to get. You will find the zeroing options under Disk Utility -> Erase -> Security Options
Just make sure you actually boot from your clone before erasing your original. And if you are paranoid like me, make 2 backups, then erase the original :-)

My late 2009 iMac 27 inch hard drive just failed and is being replaced. It did not qualify for call back but I am wondering if there is others with similar issue

As I stated my late 2009 iMac 27 inch hard drive failed and is being replaced.. I am being charged as machine does not qualify for the call back program..call backs are on 2011 machines.. However i am in shock that my segate internal iMac hard drive failed in less than two years.. are there others with similar issue? Also when I get machine back will new hard drive be stable .. How do I make sure my working environment is reliable.. I have all my data and work backed up and will be able to rebuild my system but I really do not want to have to go through this down the line again.

Just to update everyone and maybe help people down the road .... It has been a week of **** .... I may have finally solved a problem that I have seen a ton of people in all different types of discussions around the world having trouble with ...... I am going to upload some pictures of what I was getting in the beginning and it came out of no where .... I had the random pixel problem with my display and to make a long story short I came across an article two days ago regarding internal temperatures and fan speed ...... I kept reading about apples approach which is not the point ..... More importantly I dug deeper into temperature control and fan settings .... I discovered all kinds of software and there is only one in my eyes that can help anyone dealing with this display problem .... I will be honest, I do not have the money right now for anything extra and am barely getting by and that is why I kept at it ... I figured keep trying different things because a repair is out of the question ... http://www.crystalidea.com/macs-fan-control - This program has solved my problem - I get to adjust three internal temperatures inside my Imac and slowly but surely as the temperatures remained constant the display is fine .... Like new again .... I cant believe it ..... Turns out the ATI Radeon HD 4850 512 MB graphics card gets very hot causing it to not do what it is supposed to ..... Anyone that has any questions do not hesitate to contact me ...... I am going to upload some pics .... They are not that clear but if you are going through this you will recognize the images for sure - There was so many more variations but this should help out - Thanks to everyone that takes the time out to help people on this support site .... I want to send a shout out to The Art Of Sound .... He is the most knowledgeable Apple person I have ever come across and I am an Apple user for 20+ years
a to

My iMac G5's Hard Drive Has Most Likely Failed

So my hard drive has been having problems since November 2005, but the computer has been barely holding out, until now. The computers just dead. I got this message from
It happened at the most random time. Yesterday morning, I turned on my computer and opened Safari. Everything went just fine, and about 3/4 way through loading the apple startpage, the entire computer froze up.
I tried disk utility but it froze while verifying and repairing disk permissions (about 1/8 started and it froze) and when I did verify disk, it came up with a popup window stating:
Error: The underlying task reported failure on exit
And then in the Disk Utility information window where it says the status that its at (Checking....) it said this:
Checking HFS Plus Volume
Checking Extents Overflow File
Checking Catalog File
Invalid Sibling Link
Volume Check Failed
The underlying task reported failure on exit.
1 HFS volume checked
1 volume could not be repaired because of an error
Then I ran fsck in single-user mode, and i got this:
#fsck -fy
disk0s3: I/O timeout
(4, 7808)
I'm not sure what the coordinates mean. I'm thinking they might be the coordinates to a bad sector that may be screwing EVERYTHING up because the computer failed to recognize the bad sector, and close it off of any further use.
After that I ran diskutility in single-user mode thinking maybe the GUI version was corrupted... but I let the diskutil verifyPermissions /dev/disk0s3 run for an hour and nothing showed up on the screen so i just decided to stop, shut down, and go to bed.
So now i've figured, my iMac has given me enough trouble as it is. ive had so many problems with it... ever since november 2005 (5 months into owning it) it has had the following hard drive error code show up in extended test for the Apple Hardware Test ever since... and about 1 hour ago, i retested it, and sure enough this came up:
**ERROR*CODE***ERROR*CODE**
2STF/8/3: S-ATA Bus O-Master
**ERROR*CODE***ERROR*CODE**
I'm really not happy with mac right now. I think their 1 year warranty is useless and they pretty much leave you screwed if you dont buy their applecare protection plan.
I have a windows 98 (upgraded from 95) that i bought way back in 1997, and its still functional... with the same hard drive... same everything... and it works just fine... except for the memory is small because back then 128 GB was the biggest it got) :P
so a 5 GB hard drive going on its 10th working years, and this 150 GB hard drive failed after 14 months... all i've gotta say is: Apple, thats pretty pathetic... especially after you mock PC in their commercials for "breaking down". Ive actually had less problems with all of my 3 PCs combined then I've had with this **** iMac.
So now heres what i'm trying to figure out. i'm wondering, what kind of hard drive i shuold buy to replace it... i tried the DIY hardware replacement ordering page but it says that the apple website couldnt find it (http://www.apple.com/support/imac/g5/diy/).
I wasnt planning on buying from the apple DIY anyway, but I wanted to see if it would specify a type of hard drive. Where is the popular website to go to buy these things, and how expensive will it be for me to replace it with a hard drive about as big as my current one).
Or should I not throw my hard drive away yet, and invest hope in it somehow. I heard DiskWarrior could do the trick, but I dont want to have to spend $80 on a piece of software that might not even work out right. And all the free ones you have to download to your mac... but too bad for me, my mac wont even start up... (well it does but when it gets to the desktop, its pretty much unfunctional... just a moving mouse that wont do anything).
Is there some renouned website (as crucial.com is for memory) among these forums that you might suggest?
I'm open and desperate for any input i can get. The sooner the better
Thanks in advance
-Mark

Hey look, its my friend Charlie from my Disk Permissions Error -36 post.
Here's our thread from last time. Alot of the stuff there still pertains: http://discussions.apple.com/thread.jspa?threadID=620422&tstart=0
It turns out the reformat I did only worked for a little while. Then last friday, my kernel was corrupted, and so i did "Erase All" but skipped the "Zero All Data" figuring that it wouldnt be necessary since I wasnt discarding my drive, so there wasnt anything to secure from anyone recovering private data. It worked for 4 days after that, and now I'm here again. With problems.
Do you remember getting disk I/O errors on disk0s3?
If you remember way back then, I had gotten this error when I did diskutil list in Terminal:
Aug 30 21:42:08 mark-imac-g5 kernel[0]: disk0s3: I/O error.
/dev/disk0
#: type name size identifier
0: Applepartitionscheme *149.1 GB disk0
1: Applepartitionmap 31.5 KB disk0s1
2: Apple_HFS Macintosh HD 148.9 GB disk0s3
I'm running DiskWarrior right now (borrowed it from a friend... didnt feel up to paying the $80 & have it potentially not work) and its stuck at this message:
Rebuilding Directory Data
[ |||||||||||Solid Progress Bar||||||||||| ]
Step 5: Locating Directory Data
[\\\\\\\Barbershop-like Progress Bar\\\\\\\]
Speed inhibited by disk malfunction (Skip) (Cancel)
Its been stuck there for about an hour, and I'm assuming its not going to work as you suggested it wouldn't
It's too late to do any good now, but if you ever run the
hardware test and get an error code, you should have Apple
look at it. If you were getting that error code 5 months
after the computer was new, a replacement drive would have
been covered under your warranty.
I wish I had actually done so. I was a mac-noob back then so I had no idea what anything was, and I was still getting used to the actual working-with-a-mac thing (ive been a Windows user for most of my life except for working/helping teachers with their macs at school... i was always the computer-person in school... it was pretty awesome :P)
I have to disagree with the other posters. I don't think >DiskWarrior is going to help you. Data Rescue II might help >you to get some files off your hard drive if you have files >on there that aren't backed up. But my experience was that >when I got the error in the hardware test, DiskWarrior >didn't work.
Right now I have everything backed up that I need, so it's not like i'm using DiskWarrior to get my data back. I just want a program to be able to tell the hard drive that these certain sectors that are acting up and causing the hard drive to fail are ruined and to not use them anymore. If its not just 1 sector, but the entire hard drive that is failed, I'm not even gonna bother salvaging it (even though i'm sure if it was completely failed there would be no way of getting it back that deep into failure).
I read at this website about someone else who had a similar problem to mine (http://www.desktoppublishingforum.com/bb/archive/index.php/t-901.htmldiskwarrior+speed+inhibited+by+diskmalfunction&hl=en&gl=us&ct=clnk&cd=2):
ElyseC - 07-14-2005, 11:52 PM
And now the latest reply from Marc the support tech:
There have been a handful who have seen success after four
or five days with the "speed inhibited by disk
malfunction" message. There have also been a few
up to a week. From there, admittedly, the state
of the drive has to be pretty damaged for DiskWarrior to
run so long, although the speed DiskWarrior can work is
also related to the speed of the processor, so four days
for a G3 is different than four days for a G5.
She later posted this:
,..for a variety of reasons I ended up letting DW chug away on my drive for a few days shy of an entire month.
*UPDATE MID WRITING THE POST*
Disk warrior finally unfroze! It's now Comparing Directories (recording any file or folder differences).
I'll post more when it's all done
Or if i have trouble mid-way

Which imac? Which hard drive?

Have an old purple imac with dead hard drive. Have removed drive, and would like to replace drive, but cannot determine which model imac it is, since the drive is not working. It's at least a 350, because it's slot-load. This drive is a Quantum 30 GB AT Fireball Plus AS, which i do not think is the original. As it is only used for word-processing these days, don't need 30 gb, but don't know how to determine which drive would be ok.
Thanks for any suggestions.
Carolyn
imacs, ibooks, Performas, Quadras, Os X Server Mac OS X (10.2.x) OS 7.1 to 10.2

Your iMac can use any 3.5" IDE/ATA desktop drive. The iMac will recognize up to 127 GB of drive space.

HT2729 Digital Copies to my IMac with external hard drive, then on my MacBook Pro I can see the movies, but if I close out my IMac, I can't access my movies on my laptop??? Can anyone help me out here? Thanks.

I have my itunes stored on my external hard drive of my IMac.
I have started to put my Digital Copies to my IMac with external hard drive, then on my MacBook Pro I can see the movies, but if I close out my IMac, I can't access my movies on my laptop???
Can anyone help me out here? Thanks.

I have my itunes stored on my external hard drive of my IMac.
I have started to put my Digital Copies to my IMac with external hard drive, then on my MacBook Pro I can see the movies, but if I close out my IMac, I can't access my movies on my laptop???
Can anyone help me out here? Thanks.

How do I replace my old internal hard drive with a new one?

I just ordered a new 1TB hard drive to replace my very small hard drive in my 17" MacBook Pro.
I've looked around at some of the discussions and apparently I need to format the new hard drive first. I am not so great with this techy stuff. Can someone briefly help me and explain exactly how I am supposed to do this? Like I take my old hard drive out first put the new one in.... format it. Take it out put the old one in... somehow copy it... agh confused...
Help? Thanks.

If you have a time machine back up of your current drive you can do this
Shut down your computer, install the new drive. While the computer is off plug in the external hard drive that you have your time machine back up on. Hold Option key while the computer turnes on, let go of the option key once you get a grey screen. Shortly after you'll see a list of bootable drives, select the one that has your time machine back up on it and boot into that drive.
From there go into disk utility, format your new drive too, osx extended journaled ( I think, double check that, its been awhile since ive had to do this), hit format
Exit disk utility and then you can use time machine to copy all your exisit data to the new hhd and then your pretty much done.
There is also a program called Carbon Cloner that will do esentially the same thing however I've never uesed it.

When ever the power goes out or I restart my iMac the external hard drive that is used by Time Machine for backups is dismounted ?

When ever the power goes out or I restart my iMac the external hard drive that is used for backups by Time Machine is dismounted and all backups are gone. I can reselect it and it will start working again, but I am worried if the iMac hard drive should fail will I be left without a backup ?

fzgy wrote:
"Mac OS X can't repair the disk. You can still open or copy files on the disk, but you can't save changes to files on the disk. Back up the disk and reformat it as soon as you can."
It's possible a heavy-duty 3rd-party disk repair app can fix it, but they're expensive (DiskWarrior is about $100), and there's no guarantee it can do it.
Am prompted to reformat but I don't have a good understanding of what this means and how to do it.
That will erase it. See Time Machine - Frequently Asked Question #5.
It sounds very much like the disk is beginning to fail, although it's possible there's a bad port, cable, connection or power supply (if it has its own).
I'd suggest getting a new one, and using it for your Time Machine backups; once you have a good backup there, reformat the old one (and select Security Options to write zeros to the whole drive -- if that fails, you know the drive is toast). Use it for secondary backups, per FAQ #27. If it has failed, get a second new one for secondary backups.

How to copy and replace new Mountain Lion hard drive with old Snow Leopard drive?

So far I have not found an answer to my question, so I am hoping that this is feasible.
A while ago I purchased a used 2010 Macbook Pro running Snow Leopard that did not have the installer disc. A week ago the hardware died on me, so I replaced it with a new 2012 Macbook Pro running Mountain Lion.
The problem is that I purchased a 1 TB aftermarket HD for my old Macbook Pro and want to replace the current smaller hard drive in my new computer with it. I've already run Time Machine and put all of my data in my new computer so I figured that it would be possible to simply copy that disk image back over to my old drive and replace it. However the computer showed that they weren't compatible. When I tried to put my old hard drive in my new computer there was not a bootable OSX available.
Since Mountain Lion already came on my new computer I do not have an installer that I can use.
Is there anyway I can copy the current Mountain Lion information from my new hard drive and basically have a fully functioning, bootable copy on my old hard drive that I can put back into my new computer?
Thank you.

Well, if you put the HDD from the old Mac into an external enclosure you can use a tool like Carbon Copy Cloner or SuperDuper! to clone the Mountain Lion installation onto the 1TB drive. If you go this route, I would suggest you consider using CCC as it does have the option to clone the Repair Partition as well as the boot volume.
Another route you could take would be to put the 1TB drive into the new MBP, and then boot to the Internet Recover . From there you can re-partition the drive and install Mountain Lion clean on the 1TB drive. During the installation process, you will have the option to use the Migration Assistant to migrate your data & apps. You can use your Time Machine backup for that, or if you have the original drive in an enclosure, you can migrate directly from the external drive. I have used this latter method myself a few times.

24 imac screen freeze hard drive reinstall&hardware test ok

24 imac screen freeze hard drive reinstall&hardware test ok

Do you have a question? If so please ask it and provide more information. If English is not your native language please use Google Translate .

IMac i7's Hard Drive is 56 Degrees Celsius?

Hi. The newscast report it's around 32 degrees celsius. The iMac i7's hard drive using SMARTReporter says the hard drive is at 56 degrees celsius with just Safari and Mail launched. Will the hard drive be damages (and the iMac itself). It's not really hot, it's a cloudy day. I have a western digital Firewire Time Machine backup. The iMac was bought last March 2010 only, 4 months ago. Nothing's blocking the ventilation. Would this iMac be ok?Please advise. Thanks in advance.
Gbu.

That's very hot, and I don't know if your fans are ramping up or not. My guess is probably not; I have no idea how hot things have to get before the fans get off their minimums. I noticed my drive was getting up to 51C and the HD fan was still running at its slowest. You can install a little fan program which will allow you to set minimum fan rpms. I have 3 different settings in increments up to around 2K for when things get really hot.
In very hot weather I allow the computer to sleep and cool off more often.
SMCFan Control
http://www.eidac.de/
For ten bucks you can also install Hardware Monitor, which will give you readouts of mostly everything, including the fan rpms. It is very accurate.
http://www.bresink.com/osx/HardwareMonitor.html
Message was edited by: WZZZ

TS1600 I received a 2008 Imac with erased hard drive. I have the two discs to install OS X but when it tries to boot just comes up Mac OS X cannot be installed on this computer. Is there anything I can do to get this running

I rceived a 2008 Imac with erased hard drive. They gave me the two install discs but it keeps coming up cannot install OS X on this computer.
Is there anything to do. Thanks hopefully

Well, Apple would probably point out that what you are trying to do violates the EULA.
Technically speaking, however, the issue is that the install/restore DVDs that ship with Macs do not carry all the drivers, or even all of the various versions of libraries that support all of the various models of Macs. The come-with-your-Mac disks are different than the retail versions of the OS (also, the come-with-your-Mac ones bundle iLife, which the retail ones don't).
Because the come-with-your-Mac disk contains only the drivers specific to that generation and model line of Mac, it contains a stub of code that verifies that your hardware matches the driver set on the install/restore DVD.
Your friend has a different model of Mac, with different hardware, so her install/restore disk won't work in yours. Solution: go get the retail boxed version of Leopard.

I did backup from my Imac to external hard drive, how can I unzip that backup to my mac

I did backup from my Imac to external hard drive, how can I unzip that backup to my mac again

It may be Time Machine, but Time Machine doesn't store backups in .zip folders. Open Finder and select your backup external disk in the Finder sidebar, under "Devices". If you are using Time Machine, you should see a folder called "Backups.backupdb".
If you are using Time Machine and you want to restore a full Time Machine backup, there are different methods depending on the Mac OS X version you are using. Open  > About this Mac, see Version and tell me what version you are using

Replacement iMac A1058 17" Hard-Drive

Similar Messages

Maybe you are looking for