Replacement Input Device for Car Kit CK-15W

Hi,
Can anybody tell me where or how i can obtain a replacement
Input Device for Car Kit CK-15W - ( i've lost the one that came with the unit )
Regards
Johnny

you will have to contact a Nokia service center near you for parts.
Danny b
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

Similar Messages

  • Can I use a MIDI keyboard as an input device for a software instrument?

    I have a Casio CTK-2100 that I am currently playing around with in Logic Pro 9. It can record and playback the different instruments fine using MIDI tracks. But I was wondering if it is possible to use the keyboard as an input device for a software instrument instead of the "Step Input Keyboard".
    Is it? If so, how do I set it up?

    Yes, the terminology can be a bear, many, many years ago when I started using Logic the manuals were written completely by the programmers, while they were quite humorous in places the were also really hard to understand so I learned/realized.. you can't really do anything so wrong it's going to destroy your computer so why not go ahead and experiment. I learned the basics of Logic without a manual, months later when I went back to find some some details I could figure out the manual made a lot more sense.
    Logic has been somewhat Appleized but it's not really an Apple program, it was purchased almost as developed as it is now... a lot of the additions a fluff to make it easier to understand for new users while at the same time there are some real improvements.
    This is personal opinion: With all of the forums/online tutorials...etc...etc. It seems users are learning (but not understanding) the same things, plus everyone wants to use it right away so nobody takes a deep breath and investigates on their own. Logic is a deep, deep program, while learning don't be afraid to go off on a tangent and explore the program without any other input, it can actually be inspirational. One other thing good about the manual or "Online Help", in looking up a function you will invariably come across a related concept that will provide further insight.
    And..... have fun.

  • Replace MB built-in car kit for 6310 with E50 CR-6...

    In my Mercedes ML I have a car kit compatible with Nokia 6210,6310i and it is connected/managed by Comand navi. Is it possible do replace the car kit with CR-66, using CA-55 cable and to keep all the functionality I have with the old one?
    Thanks in advance for your time!

    It is just a matter of swapping the cradle, you will also need to swap the antenna cable.
    Danny b
    Nokia Accredited Installer
    If my answers help you, give me a Kudos. Its like a pat on the back.

  • Car kit CK-15W screen sometimes doesnt come on.......

    i hope someone can help me, i bought the Nokia CK-15W bluetooth car kit as an aftermarket add-on from a car dealer when i bought my new 2008 Volkswagen Jetta.....the dealership installed the unit to my car and within days of taking delivery of my car i started having problems with the car kit visual screen not turning on
    i returned the dealer and spoke to my salesperson and he said that he would have his shop look into the problem....the servicemen claim that all the wiring has been done properly and there is nothing wrong with the operation of the unit
    the screen comes on and off whenever it feels like it, i can get into my car for the first time in the morning, the screen will turn on, i would run an errand close to my house, be out of the car for 5 minutes, when i get back in, the screen does not come on!.....the lights inside the toggle switch always lights up....but there is no pattern to the display screen coming on.
    i have owned the car for 4 months now and have learned to live with the inconsitancy of the power functions, but now my frustrations have grown because it is now 3 days since the last time the display has come on
    has anyone else had this problem???
    does anyone know what the diagnosis might be and how can properly have this problem corrected??
    (i have noticed some people in the discussion groups are international---i live in Nevada, in the United States)
    THANK YOU IN ADVANCED TO ALL WHO CAN HELP ME!!!!!
    MICHAEL

    This sounds like a screen fault.
    Return the unit to your local Nokia Service Point with proof of purchase from VW and they should be able to replace it for you.
    VW should be able to remove the screen if you do not want to do it yourself. The small cover plate on the back of thescreen needs to be removed, then the cable un-clips.

  • Car Kit CK-15W: Navi wheel turning left has not ex...

    Hello*,
    Yesterday a new CK-15W car-kit was installed into my car by a professional. I performed a functional check and recognized that
    any expected function combined with turning the navi-wheel *left*
    wasn't working. Turning it left or right makes no difference, it behaves every time as it's turned to the right direction. This means, functions which are combined with a left-turn are not reachable. Does anyone of you experienced such a behaviour and possibly found the reason for it ? May be a hardware-failure ??
    thx,
    chris

    This sounds like a screen fault.
    Return the unit to your local Nokia Service Point with proof of purchase from VW and they should be able to replace it for you.
    VW should be able to remove the screen if you do not want to do it yourself. The small cover plate on the back of thescreen needs to be removed, then the cable un-clips.

  • Options for car kit

    Got my iPhone this week and am discovering the less than stellar speakerphone. I really wanted to just put this in a cradle on the dash and be done with it.
    I'm trying to come up with a simple and reliable solution for the car.
    One thought is to use a single earpiece with mic ...
    http://www.amazon.com/iPhone-Ear-Loop-Headset-Earphone-Microphone/dp/B001VFNPI2/ ref=wlit_dpo?ie=UTF8&coliid=I2HEAWC4J80E84&colid=19Q4P8IHQ39RN
    I would just use this to answer calls. I prefer the ear hook (buds NEVER stay in my ears). This would be good as I wouldn't have to recharge a device. I have used Bluetooth ear devices but I find them uncomfortable.
    I was also looking at this ...
    http://store.apple.com/ca/product/TX470VC/A?mco=MTQ3NDcxNjk
    I'm leery of the Bluetooth speakerphones as every one I've ever tried had horrendous echoing problems.
    Any recos for a "non-fuss" car kit? TIA

    Hi i was thinking along the line of thr tom tom car kit it has everything on it you need it also has a line out
    http://store.apple.com/uk/product/TX529ZM/A?fnode=MTY1NDAzOQ&mco=MTMwNzg4MjM
    hope this helps

  • RE: Down load contacts from Car kit (CK-15W) to No...

    As you might have guessed from the subject line I am missing all of my contacts from my N95 phone. However they are still present in my car kit. Is there any way of transferring them back to the phone from the car kit?
    John

    This sounds like a screen fault.
    Return the unit to your local Nokia Service Point with proof of purchase from VW and they should be able to replace it for you.
    VW should be able to remove the screen if you do not want to do it yourself. The small cover plate on the back of thescreen needs to be removed, then the cable un-clips.

  • N73/Brodit cradle & cable for car kit

    Can you please offer any assistance? I have a full Nokia car kit with interchangable cradle (not Bluetooth, model unknown) which was purchased 2nd hand for a 6230i. I have now upgraded to N73 & need to modify the car kit. The existing pop port lead works OK with the N73, so I have bought a Brodit cradle, but the lead does not fit the recess in the cradle, so bought a CA-27 cable as advised by the Brodit info. The CA-27 fits my control box but on testing with a meter, is wired different to the original lead & doesn't work with the phone. Is there any tech information available online on pin-outs for the cable etc., or would a Nokia CK-7 advanced control box work with this phone & CA-27 cable? Rewiring the cable wouldn't be a problem if I had the info - I used to repair Laptops to component level. Also, I don't really want to replace whole kit again (3rd time!) & don't want to go totally bluetooth. Any information would be much appreciated! Dave.

    Thanks confiture & Danny B for your responses - I was aware that the CA-27 was intended for the CK-7W advanced. Since the existing cable from the kit works with the phone, I was hoping to find some pin-out info to modify the CA-27. We are thinking of emigrating this year & I have had to buy the N73 for cash to avoid extending contracts, so had hoped to sort the car kit problem as cheap as I could. Unless someone comes up with an alternative idea, there must be a way of modifying the CA-27 to the same pin connections as the existing cable, which as I said, works "straight up the **bleep**" of the N73! Would buy a CK-7W box, but a mate who used to work in the trade says they are prone to going wrong, and a 2nd user one (ebay etc.) may be a duff one.

  • 2.5mm / Pop Port Adaptor for Car Kit?

    I currently have a Nokia Car Charger / Hands-free that my work installed, it has a power connector and a 2.5mm connector. I use it with a Nokia 1100 but I have upgraded to a Nokia 6100, however since the 1100 uses a 2.5mm connector and the 6100 uses some kind of Pop Port, it doesn't connect. I'm not sure of the brand of car kit since my wife is using the car, all I can remember is the name begins with 'A' but that's not much help. Anyway, if someone could suggest an appropriate product to use, that would be very helpful.
    William.

    The only car kit i can think of who supplies a cradle to fit the Nokia 1100 is THB Bury, if this is fitted into your car you will be able to replace the cradle, it simply clips off, expect to pay around £60. Let me know if you can see any names or part numbers.
    Danny B
    Nokia Accredited Installer
    If my answers help you, give me a Kudos. Its like a pat on the back.

  • 10.4.10 Update kills most USB audio input devices for iChatAV

    I have a Logitech Quickcam 5000 Pro that has a built in Mic. The UVC compliant camera still works, but under 10.4.9 the mic worked also; however, it no no longer shows up as an audio input device.
    Intel Mac Mini 2GB RAM / MacBook   Mac OS X (10.4.10)  

    Add another to the pile, slightly different: No audio support for my FIREWIRE based audio interface.
    Running 10.4.10, software update installed.
    OSX recognizes it, at any sample rate I want to use it at.
    Sound setup, everything else (my whole entire studio) recognizes it.
    iChat AV, when I go to the video tab to select "microphone" will give me default of none and then my device name (mLAN audio network). As soon as I select my device, the microphone option disappears completely. The only way to get the selection option back is to restart iChat, upon which the problem repeats itself.

  • Input devices for drawing?

    im just getting started with Flash cs3. it is difficult to
    draw with a mouse. what are other input device options for drawing
    and animation?

    Wacom is by far the most popular and in my opinion the best
    for all computer drawing. Intuos is their line which most
    professionals favor. The size is a matter of personal comfort. I
    use the 9x12 tablet, but many of my colleagues find it too large,
    making them move their arms and shoulders too much when drawing.
    They opt for the 6x8. Check it out here:
    http://www.wacom.com/intuos/index.cfm
    There are other tablet manufacturers, but I've never tried
    those. I've mostly seen them used for handwriting input or by
    people writing in East Asian languages (Chinese, etc.)

  • USB Keyboard Multimedia keys ; two input devices for one keyboard.

    Hi. I can't get my multimedia keys to work (Microsoft Wireless Laser Desktop USB keyboard). They don't show up in dmesg, xev, or the command line scan code program at all, even though the standard keys show as usual.
    One peculiarity is that the keyboard appears to be mapped to two devices /dev/input/event3 (the standard keys) and /dev/input/event4 (the multimedia keys) ; is there a way to "merge" the two inputs ? Is it a kernel problem ?
    TIA, Paul

    I solved my problem :-)
    Keyboard creates two event devices:
    lrwxrwxrwx 1 root root 9 lip 17 12:57 pci-0000:00:1a.1-usb-0:1:1.0-event-kbd -> ../event1
    lrwxrwxrwx 1 root root 9 lip 17 12:57 pci-0000:00:1a.1-usb-0:1:1.1-event- -> ../event2
    I had only first of it configured in xorg.conf (normal keys). I configured second device as below  (Identifier  "Multimedia keys"):
    # Core keyboard's InputDevice section
    Section "InputDevice"
    Identifier "Logitech Media Keyboard 600"
    Driver "evdev"
    Option "Device" "/dev/input/by-id/usb-Logitech_Logitech_USB_Keyboard-event-kbd" # it is my event1
    Option "XkbModel" "evdev"
    Option "XkbLayout" "pl"
    Option "evBits" "+1"
    Option "keyBits" "~1-255 ~352-511"
    Option "Pass" "3"
    EndSection
    Section "InputDevice"
    Identifier "Multimedia keys"
    Driver "evdev"
    Option "Device" "/dev/input/by-path/pci-0000:00:1a.1-usb-0:1:1.1-event-" # it is my event2
    Option "XkbModel" "evdev"
    Option "Protocol" "evdev"
    EndSection
    In Serverlayout I added entry for  InputDevice  "Multimedia keys":
    Section "ServerLayout"
    Identifier "Dual Head"
    InputDevice "Logitech MX620" "CorePointer"
    InputDevice "Logitech Media keyboard 600" "CoreKeyboard"
    InputDevice "Multimedia keys" "SendCoreEvents"
    Screen "Desktop"
    EndSection
    And almost all multimedia keys started to work.
    I had small problems with couple of keys which created keycodes greater than 255. I used keyfuzz to remap these keycodes to something smaller than 255.
    After that i scaned all keycodes with xev, and mapped them to keysymlinks with xmodmap.
    Now all media keys are working and I can configure KDE to use it.

  • Car kit CK-15W hang on start up logo of nokia hand...

    dear all recently i purchesed CK-15W from dubai installed in pakistan after 3 days it just stucked on start up
    just shows nokia hand shake after 5 minutes ! information apears press Navi wheel to restart

    Hi All,
    This another post I sent when i was told to return the unit, hope it helps with your situation.....
    When removing the unit for return I determined the actual cause of the problem which others should know.
    The problem occurs when you turn the cable of the display unit back 90 degrees so the unit can be screwed down on a flat surface. this appears to put stress on the connections in the base of the unit. The unit is designed for this routing of the cable but great care needs to be exercised when pushing the cable back so as not to stress the connections inside.
    Unit now works fine with out the hassles of returning it and the arguments that would of occured when the unit tested fine.
    Hope this helps others
    Regards,
    Andrew S

  • How do I use my iPad as the display and input device for my Mac Mini?

    I plan to have the following stereo configuration:
    Integrated amplifier with USB input that supports up to 24/192 audio, the Peachtree Nova 125
    Mac Mini with USB connection to amp, wifi to the Internet, housed in the equipment cabinet with the integrated amp, no other music source.  No display or keyboard connected to the Mac Mini.
    I would like to use my iPad as the display and to control the Mac Mini to run Pandora, iTunes, Spotify, podcasts, etc.
    Anyone have success with this general configuration?

    You need a set of apps (one for iPad and another for computer) like Team viewer or Go to my PC

  • SCORE: alternative input devices for score symbols, etc.

    I discovered something really useful to me today, and I'd like to share it with all you score guys (though this has application for non-score operations also).
    I've been on this quest recently for a dedicated, alternate USB device to invoke key commands that normally require holding down modifiers. F'rinstance, on my system, CNTRL-SHIFT-A adds an accent. But with this "holy grail" device I've been looking for, this key combo would be invoked by a single keystroke. However, either the hardware I've been looking at (such as PI Engineering's X-Keys) or software (such as QuickKeys) don't or won't work for me for various reasons.
    But I do have this little $25-$30 Kensington 10-key keypad sitting here. It's basically a device that duplicates the function of the 10-key keypad of the standard Apple keyboard. And I found today that it's "1" key can be programmed to invoke a different key command than the "1" key on the Apple keyboard's built-in 10-key keypad. Furthermore, the above-the-Q "1" key can be programmed for a third function.
    So now I've got my 10-key keypad on the left, mouse on the right, and as I select notes with the mouse I can hit a single key on this keypad and add accents, staccato, slurs, crescendi, and other things, all with a single keystroke. It's pretty cool, thought I'd share.

    For anyone interested in this, the brilliant answer given to me by Doug over at LPH is that you can transpose the Staff Styles which changes the chord symbols as well...

Maybe you are looking for