Replacement needed problem

Hello.can anyone plz help me.i got unlocked my iphone but when i tried to activate the iphone it says"this iphone is not able to complete the activation process and needs to be replaced"plz help me what shall i do further

Service locations listed here.

Similar Messages

  • Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.

    Probably will never ever think of buying a locked phone from AT&T cause its one of the worst system integrations ever that these companies could think of.
    The entire problem started when I put in a request with at&t to unlock my iphone 4s (ios7) which did get approved. I performed the entire instructions they asked me to do, which is to backup and restore. After doing those instructions my iphone gave me an error message below
    The SIM card inserted in this iPhone does not appear to be supported.
    The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
    Basically saying that at&t hasn't still unlocked the iphone which a really helpful apple executive was able to confirm. I initiated another unlock process from at&t in order to unlock the iphone, just to be sure that its not something wrong from my end. The nice at&t lady stayed on chat with me to unlock the iphone step my step while I was calling the apple tech too. And the apple tech confirmed again that the iphone is locked to at&t.
    Now, just a few minutes ago I tried another restore to see if any progress is being made and to my surprise I got an error message saying
    Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.
    I feel like I am just going around these two different "money hogger" companies which set certain rules and regulations to screw a regular phone buyer. I purchased this iphone in USA and trying to unlock in India, is it really this hard to simply unlock a device.
    For now I am going to try to call a apple office in india (apprently we don't have very many out here) and see if they can help me. But any other assistance regarding unlocking an iphone 4s would be helpful. I have however, tried checking IMEI.info, called up apple, talked to at&t (which always say go talk to apple) I do have a case number from apple as well in case an apple executive reads this discussion forum (case number: 566383594)
    Thanks

    You got a confirmation from AT&T that it was authorized. Is this correct? - Yes i did get an email authorization on the 21st.
    Then you connected the phone to a computer with the latest version of iTunes installed. You clicked on the phone's name in iTunes, then clicked "Backup Now". - Yes
    When that finished you clicked "Restore iPhone" (NOT "Restore Backup") - Yes
    Are you with me so far? - Yes.
    And @ Varjak is right that after the 3rd restore I get the replacement error. 
    Plus I have NEVER jailbroken the iPhone. To give you another update, I spoke to a really nice apple tech in India who was atleast able to get me out of the replacement error by doing a recovery mode option. However, the lastest restore still gives me the same error
    The SIM card inserted in this iPhone does not appear to be supported.
    The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
    Message was edited by: jabgars

  • Replacement need error on ipad 2 activation

    Please help me to activate my ipad when i restore it with new ver 7.0.4 ipad 2 this error accur
    Replacement Needed
    This ipad is not able to complete tje actoatipn process and need t be repleced.Please visit yout nearest apple stpre or athorized service provider for ore information?

    i have the same problem. I went to an Apple Store and told me that i have to buy a new one.....

  • Just tried update to iOS 7.1.2. Why has do I get a "replacement needed message"?

    As directed, I just tried updating to iOS 7.1.2 on Ipad. Went through process and then was told to restore system. Now it says "Replacement needed".   Why?

    Hi Bob,
    I have an iPad 2 (3rd Generation).  It has a camera and does not have a retina screen.  It was not until yesterday that my iPad informed me that an upgrade (IOS 7.0.2 was available for downloadeven though the upgrade has been available for over several wweks.  I  have been reading this thread and the earlier thread you recommended and  have been putting off the upgrade until the replacement issue was resolved.  Since there really has been not new updates to this tread, I am assuming nothing has happened.  Although I feel bad for other members of this forum, my iPad is working perfectly well and I do not want to do anything to jeopardize that.  But I have read that "earlier thread" a number of times and the one contribution that could change my mind regarding doing the upgrade is: youse123 May 6, 2014 6:02 AM in response to kger
    I have been in regular contact with AppleCare who are very helpful. The issue has been escalated to the iOS Engineers (in Australia) and they said the issue is affecting some cellular iPad 2's (WiFi only iPad 2's should not be affected), and is definitely a server backend configuration problem with the cellular connections.
    My iPad is a wifi only.  Have you heard of any wifi only iPads experiencing an issue with the IOS 7.1.2 upgrade?

  • Iphone 4s says: "Replacement needed" after i update to latest ios

    my iphone says: Replacement needed after i update to latest ios...is the apple change the my iphone for free or they repair this?thanks anyone knows about this problem?

    Yes, I tried. But nothing is working. I am feeling bad as such a costly phone stop working in 1.4 year ?
    I am just sharing my experience.
    I am not ranting but yes angry as I am eligible for upgrade in Nov 2012 so don't want to pay $149 for replacement as I can upgrade to iPhone 5.
    Apple expert please help me how can I fix it. It's completely software issue.

  • Replacement Needed??

    When setting up refurbished iPhone a message came up reading "Replacement Needed, This iPhone is not able to complete the activation process and needs to be replaced" I just paid $450 for this phone, what do I do??

    eBay?
    Craigslist?
    Stolen is very likely then

  • IPhone5s Replacement Needed?

    My phone is giving me an error saying
    Replacement Needed
    This iPhone is not able to complete the activation process and needs to be replaced. Please vist your nearest Apple store.
    Does this mean I have to get a NEW phone replaced from apple? Also the phone is UNLOCKED. Will they allow me to pick another color or choose back the same one I purchased?

    Hello AlexLenh
    If it is asking for service, everything you need to know will be in the link below. Apple will replace your iPhone with the same iPhone model so you will still get the same color and size as you currently have. 
    Service Answer Center – iPhone
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
    Regards,
    -Norm G.

  • Pb ipad 2 Replacement Needed

    i have pb ipad 2 Replacement Needed ios 7.1.1.plz

    What iOS version is it currently running?
    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    You can no longer update to iOS 6.x, or down grade the iOS.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
    How to Upgrade to iOS 7
    The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
    There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
    To upgrade using Wi-Fi:
    Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
    Go into the iPad's Settings.
    Locate and tap "General" from the menu on the left.
    The second option from the top is "Software Update". Tap this to move into the update settings.
    Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
    Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
    To upgrade using iTunes:
    First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
    You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
    Now you are ready to begin the process:
    If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
    Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
    After canceling the dialog box, iTunes should automatically sync with your iPad.
    If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
    After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
    From the iPad screen, click on the Update button.
    After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
    After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
     Cheers, Tom

  • IPad 2 Replacement Needed

    iPad 2 Replacement Needed not Activate Help me please imei 012927009444894

    Make an appointment with the nearest Apple Genius, and discuss your options.

  • Please!actived iphone 4 require replacement needed

    i upgraded ios7 error -1,then i used i4 tool restore ios 5.1.1.But when actived iphone require replacement needed.i don't know,i come from Viet Nam and Viet Nam not supported.Please help!

    pomo920 wrote:
    ...I obviously can't call and talk to Apple Support...
    It's not obvious at all. If you mean you can't call from your phone, call from another one. Make an appointment at the genius bar and take it in for them to look at.

  • I restoed my iphone 4s, and now it says "replacement needed" why does it say this?

    hello i retored my iphone 4s today so i can earse the stuff i dont need, after that i placed my sim inside then it says "replacement needed" it says i have to take it to apple and all that stuff when the phone is not stolen!!!

    No, it says no such thing.
    What is the precise text of the message?

  • I got a blacklisted iphone 5 from att and I reset it and now when I try to set it up it needs a sim card so I went to the att store and they put a sim in and on the iPhone it says replacement needed couldn't complete activation.i just want use it as a ip

    I got a blacklisted iphone 5 from att and I reset it and now when I try to set it up it needs a sim card so I went to the att store and they put a sim in and on the iPhone it says replacement needed couldn't complete activation.i just want use it as a ipod

    To use it as an iPod it must be activated...to do that it has to accept a sim.  A blacklisted iPhone cannot do that.  Take it back to AT and T where you got it and get your money back.

  • Battery Problems - Replacement needed?

    Hi everyone!
    I've not posted on this forum before but just thought here would be the best place to come to ask for expertise and opinions!
    Okay i'll cut to the chase!
    Roughly 18 months ago I purchased a lovely Macbook Pro with the Macbook Pro Applecare too.
    In January 2009 I realised that the battery wasn't too good health wise.
    Since brand new battery life was roughly 3 and a half hours
    Since January 2009 the battery lasted roughly over an hour/hour and a half.
    Since May 2009 the battery barely even lasts 30 minutes. (iStat Pro says my battery health is 14%)
    As you can tell, I am quite annoyed at this! (details of battery information below as of May 2009)
    Charge Information:
    Charge remaining (mAh): 768
    Fully charged: Yes
    Charging: No
    Full charge capacity (mAh): 781
    Health Information:
    Cycle count: 267
    Condition: Check Battery
    Battery Installed: Yes
    Amperage (mA): -202
    Voltage (mV): 12213
    In January I enquired about the battery and would I be able to get a replacement for free due to being covered by the Applecare, but I was told by the man at the Genius Bar that I would have to pay full retail price for a new battery due to batteries not being covered by applecare and the complimentry 1 year warranty was the only thing that covered the battery health.
    I read that "Apple claim a battery should retain 80% capacity after 300 cycles" and that getting in touch with customer relations may be a good idea. Can this be applied to my battery information?
    Is there anyway I can get my battery replaced by Apple? Or is it a case of paying an obscene amount of money for a new battery which would do the same after 18 months?
    Thank you for any help! Additional information if needed will be gladly given!
    Chris.

    Well another problem - probably related - has occured!
    Hopefully, if I can wangle it a bit, would this be able to get a replacement battery under Applecare?
    When I do use my Macbook Pro and it isn't plugged in, even though it barely lasts 15 minutes now the "Reserve battery power" window pops up on screen, even when the battery status indicator (top right of the screen) shows that there is 3/4 of the battery power left 2 or 3 times in 5 odd minute gaps (black too).
    Due to this error, and Applecare wanting to solve almost any problems encountered with Macs, would I be able to - if I use craftyness and ingenuity - be able to get a replacement battery?
    Is this a good idea or not?
    Thanks for any help, and thanks to Kappy for replying!
    Chris

  • Mechanical problem w/ internal combo drive - replacement needed

    Combo drive on iMac appears to be failing - works only about 25% of the time. When a CD/DVD is loaded (open/close/tray work fine), the drive makes a lot of noise (clicking) then ejects after several tries to load. If it does load - DVD/CD play fine. This is a mechanical rather than software issue. The current internal drive is a SONY DVD RW DW-U10A. Where can a replacement internal combo drive be bought online compatible with this iMac? Other options/Recommendations? Thank you in Advance for any info you can provide.
    iMAC (17" Flat panel) G4 1GHz   Mac OS X (10.4.3)   Purchased in 2003

    Leslie, Welcome to Apple Discussions.You may wish to opt for an firewire external DVD-RW drive. Here's an example. This will be far easier to do; the internal upgrade is not for the faint hearted:
    Take Apart Guide
    Full Apple Service Manual
    As and when you do it you may want to give consideration to boosting the HDD and 'factory' RAM at the same time. You must remember to replace the thermal paste as you close the iMac up.
    As for Drive selection: xlr8yourmac runs a drive database. Click this link and enter DVD+R/RW + DVD-R/RW, iMac G4 and OS 10.4 in the relevant fields and click search. The Pioneer DVR110 seems popular and compatible.
    regards
    mrtotes
    P.S. Please note that you've posted in the iMac G3 forum. In future you will be better off posting in the iMac (Flat Panel) forum.

  • XML tag markers moved: Find and Replace causing problem in xml elements

    Hi All,
    I am doing find and replace using GREP. While using the expression like $1, $2 (Found Items) in the change to field it changes the placement of tag marker. If the found item is a part of two of more xml elements, I am getting a serious problem while replacing it. (ie. The xml tag markers are moved.)
    See the screen shot below, then you may get better idea. And help me to overcome this issue.
    This is just an example to show you what i'm trying to say, there are so many cases like this.
    Original text/ Before doing find replace
    After replacing
    Green4ever

    Hi Peter and John,
    but it seems to me that the example is looking for any space that
    follows a semi-colon and has two word characters following it, and
    repalce that with an em space. I think you could do the same using look
    behind and look ahead and not need to replace the found text.
    Yes you are right about the look behind and look ahead. I'd like to show some more examples to show what the actual problem is,
    Original/Before Replacing,
    (Consider there is another case here, instead of em-space some times normal word space will also be there)
    Using the Grep:
    Find What---------> ^(\d+\.(?:\d+)?)~m
    Change To------------->$1\t
    After Replace:
    Did I make any sense? Eventhough this will not make any changes in the layout, my requirement is to insert the tab out-side the tag marker not indise.
    Green4ever

Maybe you are looking for

  • Troublesho​oting System Recovery Problems

    A System Recovery is a useful tool to return your Windows 8 tablet back to factory defaults. However, what do you do when the System Recovery isn't working!? A full System Recovery can be a lengthy process as there is a lot of data being transferred.

  • HT1689 I have an account configured in my iPad and want to create a new one and change it, how can I do that? Tks...

    I have a new iPad and wan to change the current account, create a new one and use that one for the new iPad, how can I so that? Tks...

  • Hint Caption Stays After Navigating Back

    I've read all the previous posts, but I'm not as easy to please as everybody else I guess. This seems like perfectly reasonable functionality to me and there has got to be some kind of work-around. The problem as most of you already know is that with

  • Choosing option on Submitting a form from Reader 9

    Good day; I have forms built in Adobe Standard 9, and opening with anything from Reader 6 - 9, and when you choose to email the form, you are given the option on whether you want to send a link or attach a copy. I would like it to default directly to

  • Problem with Pen Tool contrast...

    I noticed this the other day. When I'm using the pen tool in Photoshop CS4, it sometimes takes the color of what I'm using the pen tool on, ie; if I'm working with a picture with a bright green or pink, the path is bright green or pink (see link belo