Replacement of Mac Pro Power Cord

How do I purchase a replacement of my desktop Mac Pro power cord?

Go to any computer store or many big box stores have them. It is a standard computer card which is used on PCs and computer peripherals. APlle will also sell you one

Similar Messages

I just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer?

i just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer? i have downloaded the 3800 software three times and the imac keeps telling me there is no software to run the printer? Any help here?

Care to share which OS you are using?

I bought a mac air retina to replace a mac pro. How can I get all files of the back up and copy them to the new mac?

I bought a mac air retina to replace a mac pro. How can I get all files of the back up and copy them to the new mac?

Mail window may be in the Full Screen mode.
Move the mouse pointer to the top right corner of the Mail window and hold it there.
Menu bar should drop down and click the blue double arrow icon.
Full Screen toggle shortcut: control + command + F

Unable to Upgrade Flash Player On Mac Pro Power G5 Os X V. 10.5.8

Hi After several try i m unable to migrate flash player on Mac Pro power G5 I m getting the following error Devices With Power PC processor are no longer supported...... Get Flash Player For Power Pc
1- i tried to uninstall and reinstall the flash player and it worked but the version its 10,1,85,3 i still get error message saing Upgrade your flash player ... any luck

You can also use an app called SuperDuper to backup your system.
Allan

Mac Pro power supply failure

Anyone have any luck repairing A 2008 Mac Pro power supply? There are two fried resistors on the board and would like to save the 300 USD for a new supply.

Macitguy.com,
Image was not taken at starting, but to be sure here under are values taken 30 mn after starting with antivirus scanning from the start:
http://peloche.smugmug.com/photos/472815384_tAmam-X3.jpg
My MacPro is 2006 model 4 cores.
AMHA MacPro cooling system is (almost) like this:
http://peloche.smugmug.com/photos/93683908_t22JU-L.jpg
If I were you I'll check that nothing slows airflow around DVD location and I'll install Fan control to increase others fan speed (orange and red airflows on the drawing, mines are running at 1500/1600 rpm) this should help the whole system (AMHA), it doesn't cost to make a test.
Peloche,

Mac Pro power usage (W)

I'm looking for an UPSi for my Mac Pro. Does anyone know how much power (watts) does Mac Pro uses when it's working full CPU load? I have 8-core 3GHz with X1900 XT graphics card.

You could use APC SMART-UPS 1000VA or the RS1500VA. There are lots of threads on UPS needs and demands.
The more RAM and drives, and PCIe cards, the higher.
Power Usage of Mac Pro It requires 410 watts to start up, idles at 300 watts, and peaks at 430 watts when running Doom 3, the most demanding power wise of the ten apps we tried.
The Mac Pro had 16GB of RAM, four internal hard drives, and a Radeon X1900 XT. We're confident the Mac Pro's 980 watt power supply can handle just about everything you can do to upgrade or expand a Mac Pro.
Mac Pro: Power consumption and thermal output (BTU) information
Update: http://docs.info.apple.com/article.html?artnum=304378
Mac Pro (Late 2006) Quad Core 2.66 Ghz Mac Pro
Idle and max consumption:
171 W 445 W
854 BTU/hr 1,519 BTU/hr
Notes
*Power consumption data (Watts) is measured from the wall power source and includes all power supply and system losses.
Additional correction is not needed.
*"CPU Max" is defined as running a compute-intensive test application that maximizes processor usage and therefore power consumption.
*These numbers reflect a 23° C (73.4° F) ambient running environment. Increased ambient temperatures will require faster fan speeds which will increase power consumption.
At 35° C (95° F), 50 W should be added to reflect increased power consumption.
*1000W PSU do not deliver more than 500-600W effectively

Looking to replace my Mac Pro 2.1 graphics card with one that is silent with at least 2 DVI outputs (needed for audio production), any recommendations?

Looking to replace my Mac Pro 2.1 graphics card with one that is silent with at least 2 DVI outputs (needed for audio production), any recommendations?
Thanks

Thanks, but are these are silent?
Why do they cost over 10 x what seems available for PC?
Is it not possible to flash the cards for mac?
Something similar to a ASUS Geforce 8400GS PCI-E 2.0 512 MB DDR2 Graphics Card EN8400GS Silent/P/512M?

Is my Mac Pro charge cord under warranty

IS my Mac Pro charge cord covered under my AppleCare warranty?

Yes - if it is the one that came with the Mac.
http://www.apple.com/support/products/mac.html
GB

Replacing a Mac Pro with a 2012 Mac mini?

Has anyone replaced their Mac Pro with a 2012 Mac mini? If so, are you happy with your decision?

I had the mini fitted with a SSD by Apple. Apple use the Samsung 830 and that is very capable and the price difference was not worth the effort of installing the SSD. Where installing memory is as easy as it could ever be replacing the hard disk is mind bendingly frustrating. You might think from videos such as this
http://www.youtube.com/watch?v=13wcKCYo_Xw
that it is a simple procedure. What they dont tell you is that this man has freakishly tiny hands. In the real world the job reminds me of disassembling mechanical wrist watches. You need a variety of specialized tools or its just not happening. And there is no soothing music.
Also the video above misses a critical step. The antenna grate will not fit back into position unless a hook like tool is used to go through a specific hole in the grate and pull up from under whilst applying a pressure in the necessary horizontal direction.
So my advice is not to install your own HDD/SSD. The memory I used was from Crucial because Crucial is the retail side of Micron who provides Apple their memory for the mac minis.
http://www.crucial.com/upgrade/Apple-memory/Mac+mini/Mac+mini+%28Late+2012%29-up grades.html
Having heard of memory failures in AHD from different manufacturers and read about the need for 3.35v DDR3L I ran what I got from Crucial through 6 cycles of the advanced AHD, taking about 10 hours. No failures.
I am running Parallels and under various virtual machines running simultaneously I have intensive CADs, IDEs, and all the latest games on steam maxed out on a 30 inch display, without lag or any noticeable loading time at all. It is by far the fastest machine I have used. Very impressed.

Mac Pro power supply replacement?

We're on our yacht in Hobart, Tasmania. No access to Apple Store.
Re: Mac Pro 2006, how do I assess whether the power supply is failing?
I ask because we have experienced several times over the past couple of years the following issue. Typically in the morning I see the Mac Pro has shut down and will not startup. I go through the SMC reset procedure as per Article: HT1806. The straight forward "press the SMC Reset button" never works. Sometimes just pulling the power cord for a few minutes works. Yesterday was one of the "hard cases". None of the usual voodoo worked, so I left the Mac Pro for about 6 hours with power and all cables disconnected.
When I reconnected power the MP began a familiar 17 second cycle, both sets of Memory Riser Card Diagnostic LEDs illuminate for about 3 seconds, fans start, shutdown (repeat).
Pressing down the SMC RST button stops this loop, but still cannot startup.
Yesterday I pulled the top memory riser, left MP off for 30 minutes then when I reconnected power I could startup successfully. Shutdown, reinsert top rise, restart success.
I called Apple support, authorized a case. The tech went off to consult for 10 minutes or so, then came back and said "we think your power supply is probably stuffed".
To obtain a replacement supply here in Hobart is going to be difficult and expensive. So any advice on how to improve our assessment of the true source of this problem would be much appreciated.
The famous and helpful "Hatter" once suggested to another troubled Mac Pro owner to "leave the computer disconnected from power overnight". My experience is that the longer time disconnected is related to success, but I do not understand why. Why is overnight helpful?
PS - I've not done the following procedure yet, and because it is from the 2008 Mac Pro service manual it may not apply to the 2006 exactly as written. I'm including this info for the benefit of searchers who come along in the future:
Power Supply Verification
To power on, the computer’s logic board requires “trickle” power. If the system fails to power on, first reset the SMC as described in this chapter. If the computer still doesn’t power on, follow the procedure outlined below to determine whether the issue is related to the power supply.
Verify trickle power
Diagnostic LED 2 indicates the presence of trickle power required by the logic board to begin the startup process.
LED 2 should be yellow when the DIAG_ LED button is pressed, indicating that trickle voltage is present.
Verify Power Supply Is Providing Power
Diagnostic LED 8 indicates that the main power is OK and within regulation. Plug in AC power cord, and press the power-on button on the front panel.
LED 8 should be green when the DIAG_ LED button is pressed, indicating that the main power is OK and within regulation.
If diagnostic LED 5 and LED 6 are both solidly illuminated at power up, improperly seated power supply cables could be one cause of this behavior. Check all power supply cable connections to ensure they are properly seated.
PSS - I have recently replaced the PRAM battery.

Are you getting a chime?
The chime says the computer passed the first part of the Power-On Self-Test, and if enough working RAM and a boot drive can be found, booting is likely. Lack of a chime says something else is amiss.
The usual procedure in cases of no chime is to pretend that something is loading down the power supply. So you remove all the drives and the graphics card and everything except a minimum of RAM, and look for the chime. If you get to the chime, then you add back the graphics card so you can see what is happening, and boot to the Installer DVD. then bring back an item at a time and see when it craps out.

Mac Pro power off suddenly when remove power cord

hi, i've just got my new apple mac pro from the store fresh for 2 months, and my battery cycles have been only 13.
just now when i accidently uplug my powercord, it shut downs instantly, i'm so worried about this, i'm having a final exam in 2 weeks, and if it keeps happened like this i'm gonna be so unhappy.
is this a serious problem, anyone getting this ?
can i change it to new one at the store ?
I'm in Melbourne, Australia

That certainly isn't what should happen — the machine should instantaneously and seamlessly switch over to battery power when the MagSafe plug is disconnected, unless the battery is drained or dead. What was the state of your battery when this happened?
Please test again, with your battery fully or partially charged, the machine running, and no documents open. Disconnect the MagSafe connector properly by holding the plug and tipping it downward until the electrical contact is broken. Does the machine shut down or keep running? Post back with results.

Mysterious Mac Pro Power Issue

Model Name:          Mac Pro
Model Identifier:          MacPro3,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.8 GHz
Number Of Processors:          2
Total Number Of Cores:          8
L2 Cache (per processor):          12 MB
Memory:          4 GB
Bus Speed:          1.6 GHz
Boot ROM Version:          MP31.006C.B05
SMC Version (system):          1.25f4
I recently moved my MacPro to a new building. Almost immediately it started taking a long time to boot. Twice it hung on the blue screen for approximately 10 minutes before continuing to the login screen. Problems were intermittent, sometimes it would boot fine. Then it started having trouble powering on at all. It would click and the light would turn on and off in less than 5 seconds. I took it to a different building: no powering on. I took it twice to the Apple store for the same problem, it turned on both times so I had to take it back with no help. Back at the original building, the computer turns on sometimes after leaving it unplugged overnight. I suspected an issue with the power in the building so I plugged it into a UPS. Initially it was only on a Surge Protector. On one recent occasion I accidentally nudged it with my knee and it powered down and back up. On another occasion I was sitting still watching a video and it powered down and back up with no intervention.
This will not reproduce at the Apple store. Each time it is there it has booted up perfectly using both my power cord and Apple’s power cord. Don’t know what to do next.
Any thoughts on what to try before replacing power supply and power cable? Is it possible this is not a power-related issue?

make sure to use something in 1000VA or better for your UPS and that it can support your system. May seem like $200 is a lot but then they work and give you adequate shutdown or to ride out a 5 minute power issue.
UPS
http://www.amazon.com/CyberPower-CP1500PFCLCD-Compatible-1500VA-Tower/dp/B00429N 19W/
you don't need to nor is it that effective to leave unplugged over night or something.
hit the power on for 10 seconds while every cord and device is unplugged though.
Resetting the System Management Controller (SMC)
https://support.apple.com/kb/HT3964

NEW macbook pro power cord not working

I just bought my macbook pro 3 weeks ago and for some reason my power cord is not working to charge the computer. There doesn't appear to be any damage to it and I've tried plugging it in to different outlets etc. and no luck. I noticed one day that it was blinking on and off from charging and not charging and then the next day it just stopped working completely. Is this a common thing? Should I just go buy a new one?

Welcome to Apple Discussions!
Your power adaptor is under warranty as well as your new Mac. If it isn't working, Apple should replace it for free under warranty.
You might want to try resetting the SMC:
http://support.apple.com/kb/HT1411?viewlocale=en_US
This is likely the first thing they would do at the Apple Store, and it may well solve the charging problem.
Good luck!

Exposed MacBook Pro power cord

This is happened before, but I forgot where I got a free replacment. The power cord for MacBook Pro ripped from pressure where it naturally bends. I don't feel comfortable with the wires being exposed. Do I call Apple's general 1-800 number. If so, which option do I press? I no longer have a warranty on my MacBook Pro, but this tear was due to how the power cord is constructed or not any damage I did to it.

I would make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
BTW, this is the Mac Pro desktop forum

UPS Causing Disturbance to Mac Pro Power Supply

I have been doing a lot of work on upgrading two Mac Pro's over the last few days. I have one attached to an APC UPS 1300VA 780W rated. Normally this Mac Pro is under my desk, so I do not here it. During the process of one of the upgrades I had the Mac Pro sitting right in front of me on my desk. As soon as I powered it up, I could hear this disturbing "hum" or "buzz" coming from the power supply of the Mac Pro. However the Mac Pro seemed to operate fine.
I decided to unplug the Mac Pro from the APC UPS and into a regular Tripp-Lite wall surege protector with no UPS. The noise was significantly reduced. Therefore my question to you is:
1. Do you think the fact that the APC is creating the problem or introducing a different signal (maybe not true Sine Wave) than what is required by the Mac Pro?
2. For those that have a newer Nehalem Mac Pro and they have access to the back, how would you rate the "hum"? Is it what you would expect? Now that I have it off the APC UPS, it seems more normal (it is audible, but only with my ear close to it).
3. How well are the power supply units in the Mac Pro designed? Enough to handle immediate loss of power? What about cleaning the power coming in? Sometime the voltage drop across my AC outlet is 110V to 120 V.
Mike

RS? XS? something other than those? The linked discussion OP had an XS and went to SMART unit. Before I bought CyberPower to replace one of my two 1500VAs (one XS and other RS) I decided to ditch APC this go around. And, glad I did. Quiet, green, stand-by mode.
The 2008 had bad inrush current, and ever since the G5 Quad with 1kw PSU people have been looking for the best UPS.
One article talked about PSU efficiency, and apparantly Apple's didn't match the 85+.

Replacement of Mac Pro Power Cord

Similar Messages

Maybe you are looking for