Replacement Path Explanation

Please some one explain Replacement path with an example, I have read it many times but dont seem to get it.

Hi,
/people/kamaljeet.kharbanda/blog/2006/12/28/bex-characteristic-variable-with-replacement-path
Regards,
Baba

Similar Messages

Need some clarification on Replacement Path with Variable

Hello Experts,
Need some clarification on Replacement Path with Variable.
We have 2 options with replacement path for characteristic variables i.e.
1) Replace with query
2) Replace with variable.
Now, when we use "Replace with variable" we give the variable name. Then we get a list for "Replace with" as follows:
1) Key
2) External Characteristic Value Key
3)Label
4)Attribute value.
I need detailed explanation for the above mentioned 4 options with scenarios.
Thanks in advance.
Regards
Lavanya

Hi Lavanya,
Please go through the below link.
http://help.sap.com/saphelp_nw70/helpdata/EN/a4/1be541f321c717e10000000a155106/frameset.htm
Hope this gives you complete and detailed explaination.
Regards,
Reddy

Query Designer - Variables - Replacement Path

I need a help.
In one query I need to select some data from the current Period until yesterday.
In another query I need to select the same data, but from the current Month until yesterday.
I created 2 restricted key figures:
SEL_PERIOD restricts 0FISCPER by the variable 0FPER, wich is an exit SAP for current Period.
SEL_MONTH restricts OCALMONTH by the variable 0CMONTH, wich is an exit SAP for current Month.
Now in both RKFs I want to restrict 0CALDAY from the beginning of the Period or Month until yesterday.
I found this variable 0DAT, wich is an exit SAP for current day.
I'm trying to create an interval variable, type replacement path, with From Value not filled and To Value filled with 0DAT - 1.
But it doesn't work, Query Designer points that 0DAT is not an allowed source for the target variable.
And the documents that I searched state that "the target variable must represent a single value" and "the source variable must be input-ready".
Does anyone have a suggestion on how I can restrict 0CALDAY, for this specification ???
Thanks in advance.
César Menezes
Edited by: César Menezes on Jun 25, 2011 11:51 PM
I forgot an important point:
Sometimes I need current Period or Month, in other cases I need the same Period or Month from last Fiscal Year or Calendar Year.
No problem with 0FISCPER and 0CALMONTH, I can off-set the variables by -12.
But I would like a help on how to do it with 0CALDAY.
Example: today is 25.06.2011. In some cases I need to restrict until 24.06.2011, in other cases I need to restrict until 24.06.2010.

Hi Ceaser,
This is a generic explanation to your scenario. Please make some changes as per your requirement. Just to give you some idea......................
We need to manipulate u201CKey Dateu201D values to achieve required analytics.
Step 1: As a first step, create a variable on u201CSales Dateu201D (or whichever date is used for Sales Date) field (ZPDATE) with user input. It was meant to capture u201CKey Dateu201D through user entry.
Step 2: Create a restricted key figure on Sales & restrict it on u201CKey Dateu201D value to get first analytics need i.e. u201CSales on Dayu201D.
Step 3:Next step was to manipulate the value of u201CKey Dateu201D on which I could restrict u201CSalesu201D (Key Figure) again and again to get other values.
Step 4: Create a new variable (e.g. ZPUTMNTH) and assigned it to be filled up by Customer Exit. (For simplicity purposes only u201CMonth to Dateu201D value is explained below. Same procedure can be repeated to fulfill other needs. Though in code section, ABAP code is available for almost all the variables)
Create Variable
Step 5: Create one variable (ZPUTMNTH) for u201CMonth to Dateu201D with processing by u201CCustomer Exitu201D. This variable was created on u201CDateu201D characteristics.
Sample ABAP Code
*& Include ZXRSRU01
DATA: L_S_RANGE TYPE RSR_S_RANGESID.
DATA: LOC_VAR_RANGE LIKE RRRANGEEXIT.
Data: v_loc_date type d.
Data: v_loc_date1 type d.
Data: v_loc(4) type c.
CASE I_VNAM.
to calculate "month to date" user input is "Calday" Key Date
WHEN 'ZPUTMNTH'.
IF I_STEP = 2. "after the popup
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZPDATE'.
CLEAR L_S_RANGE.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW(6). "low value, e.g.YYYYMM (200606) part of key date (20060625)
L_S_RANGE-LOW+6(2) = '01'. u201C low value e..g. YYYYMM01 (20060601)
L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW. "high value = input
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
EXIT.
ENDLOOP.
ENDIF.
to Calculate no of days up to "month to date" (user input Calday Key date)
WHEN 'ZDAYMTH'.
IF I_STEP = 2. "after the popup
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZPDATE'.
CLEAR L_S_RANGE.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW+6(2). "YYYYMMDD - DD will indicate the no of days
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
APPEND L_S_RANGE TO E_T_RANGE.
EXIT.
ENDLOOP.
ENDIF.
to calculate Previous year "month to date" (User input Calday u2013 Key date)
WHEN 'ZDAYPMTH'.
IF I_STEP = 2. "after the popup
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZPDATE'.
CLEAR L_S_RANGE.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
L_S_RANGE-LOW(4) = L_S_RANGE-LOW(4) - 1. "low value previos year
v_loc_date = L_S_RANGE-LOW. "take input value in another variable
L_S_RANGE-LOW+6(2) = '01'.
L_S_RANGE-HIGH = v_loc_date. "high value = input, taken into another variable
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
EXIT.
ENDLOOP.
ENDIF.
to calculate "year to date" (User input Calday u2013 key date)
WHEN 'ZPUTYEAR'.
IF I_STEP = 2. "after the popup
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZPDATE'.
CLEAR L_S_RANGE.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW(4)."low value, e.g.200001
L_S_RANGE-LOW+4(4) = '0101'.
L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW. "high value = input
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
EXIT.
ENDLOOP.
ENDIF.
to calculate "Previous year to date" (User input Calday u2013 key date)
WHEN 'ZDAYPYR'.
IF I_STEP = 2. "after the popup
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZPDATE'.
CLEAR L_S_RANGE.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
L_S_RANGE-LOW(4) = L_S_RANGE-LOW(4) - 1. "low value previos year
v_loc_date = L_S_RANGE-LOW. "take input value in another variable
L_S_RANGE-LOW+4(4) = '0101'.
L_S_RANGE-HIGH = v_loc_date. "high value = input, taken into another variable
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
EXIT.
ENDLOOP.
ENDIF.
to calculate "Previous year" User input Calday u2013 key date
WHEN 'ZPYEAR'.
IF I_STEP = 2. "after the popup
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZPDATE'.
CLEAR L_S_RANGE.
v_loc = LOC_VAR_RANGE-LOW(4) - 1.
L_S_RANGE-LOW = v_loc. "low value previos year
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
APPEND L_S_RANGE TO E_T_RANGE.
EXIT.
ENDLOOP.
ENDIF.
to calculate No of Days - "year to date"
WHEN 'ZYRDAY'.
IF I_STEP = 2. "after the popup
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZPDATE'.
CLEAR L_S_RANGE.
v_loc_date1 = LOC_VAR_RANGE-LOW.
v_loc_date = LOC_VAR_RANGE-LOW(4). "low value, e.g.200001
v_loc_date+4(4) = '0101'.
L_S_RANGE-LOW = v_loc_date1 - v_loc_date. "get the difference between current date & first date of year
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
APPEND L_S_RANGE TO E_T_RANGE.
EXIT.
ENDLOOP.
ENDIF.
Save and Activate the Include.
Go back to Exit and activate again.
Go back to Project and activate again.
Variable (ZPUTMNTH) is ready (its values filled up with the manipulation of u201CKey Dateu201D) to be used in query to restrict Key Figure u201CSalesu201D on it and get u201CMonth to Dateu201D (MTD) Sales Value.
Regards,
Suman

Query View in Replacement Path variable

When selecting the query for a replacement path variable there is an option 'Use View for Query Start'.
Does anyone know what this is (supposed) to do?
Whatever setting I use during testing, the result is always the same.
Thanks,
József.

I, too, have this same question. I have looked for an explanation of the "Use View for Query Start" checkbox and its usage, and while I would expect that to be explained in one of the following links, it is not...
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/bd/589b3c494d8e15e10000000a114084/content.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/ee/1e9b3c334d8c15e10000000a114084/content.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/2c/78a03c1178ad2ce10000000a114084/content.htm

Error while creating a Characteristic Variable with Replacement Path

Hi all,
    I am trying to create the Characteristic Variable ZVLOWDT (Low Date') with Replacement Path on characteristic ZSTARTDT (Start Date) and it gives the error 'Source to replace 'Low Date' is not defined.
   I have created a User Entry Variable VAR_DATE (Start Date) with interval like '01/01/2009 - 01/15/2009' and Customer Exit variable ZVCPDAY (does some calculation based on the input of VAR_DATE) on the same ZSTARTDT characteristic. I want to get the 01/01/2009 (lower range date of the selection) into this Characteristic Variable ZVLOWDT. We are in BI 7.0 and the following are it's properties:
General Tab:
Description: Low Date
Technical Name: ZVLOWDT
Type of Variable: Characteristic Value
Processing by: Replacement Path
Reference Characteristic: ZSTARTDT Start Date
Details Tab:
Variable Represents : Single value
Variable is: Mandatory
Variable is Ready for Input : unchecked
Replacement Path Tab: Replacement Rule
Replace Variable with : Variable
Variable : VAR_DATE
Replace with : KEY
Why I am getting this error, PLEASE ?
Thanks,
Venkat.

Hi Khaja,
   We could derive a Variable value from another Variable with out Customer Exit. There is a white paper.
First have the User Entry Variable (ZV_X) and it accepts the date range like '01/01/2009 - 01/31/2009'. Next create the Characteristic variable (ZV_Y) of Replacement Path for which source variable will be ZV_X and we could get the 'FROM Date' (01/01/2009) from the selection (ZV_X) into it (ZV_Y).
While creating the Characteristic variable (ZV_Y) of Replacement Path, I didn't find my newly created ZV_X variable in the list of available variables under 'Variable' header in 'Replacement Path' tab and it is causing the error 'Source to replace variable ZV_Y is not defined'. How could I create the Characteristic variable of Replacement Path, PLEASE ?
Thanks,
Venkat.

BW 3.5 - Issue with formula variable with replacement path

Dear experts,
I'm facing an issue with formula variable with replacement path.
Just to clarify, I know replacement paths is raising a lot of questions but I've been using this functionnality extensively in the past, both in 7.0 and 3.5, so I'm not looking for basic information about how to use it.
I'm trying to setup a simple report that would show total values per plant of Purchase Order < 100
To do so I've setup a calculated key figure as follow:
VAR1 * ("PO value" < 100 ) * "PO value"
VAR1 is a formula variable with replacement path on 'purchase order' and value attribute 'constant =1'.
(The report has to show values summarized by plant but should not show the detail PO by PO, so I'm not looking at a solution based on condition)
The report as characteristic "plant" in rows and my CKF in columns.
Now let's take an example. I have 3 POs in Plant 1:
PO1 -> 150
PO2 -> 90
PO3 -> 80
Because of the variable with replacement path, the result in my query should be:
plant1 = 170 (even though characteristic "purchase order" is not in my rows, system should evaluate PO one by one and return values only for those two that are below 100).
But the result coming is 320, which is wrong.
I've done the same report on many other 3.5 systems and it worked perfectly, and I am not able to get proper support from SAP OSS who keep saying that this functionnality is not ready in 3.5 (although I've provided screenshot of this working on another 3.5 system!!! how frustrating...)
They have also pointed to problems of Before and After aggregation but that has absolutely no impact. Once again, the scenario is working perfectly on other 3.5 systems with the same query design, so i'm sure it has nothing to do with Query Designer options.
Would anyone have ever come to an equivalenet problem? I'm wondering whether the DB itself could not play a role in the variable with ref characteristic 'constant =1' ...
Any though is welcome!
thanks

Hi,
The text variable is replaced when the exact date is clear for this key figure column according to the restriction.
To achive this, please make sure that either the variable is directly restricted in the key figure selection, or that the date characteristic is in drilldown.
Regards,
Patricia

How to use independent replacement paths for same KF over several months?

Dear Experts,
I have a query requirement to show KF values for items that meet a condition on another KF for a five month period. I know that I can accomplish this using a replacement path variable on item for one month at a time, however I am not sure how to do this for multiple months in one query.
This is an example:
Month 1
KF 1 > 0 for Items A & B.........so show KF 2 for for Items A & B
Month 2
KF 1 > 0 for Items B & C.........so show KF 2 for for Items B & C
Month 3
KF 1 > 0 for Items A & C.........so show KF 2 for for Items A & C
Thanks in advance for your help!
Kathryn

Ok, Nancy, code copy/ paste did work fine.
what does this mean:
"Change the image in the properties panel to display your new image."
(the image is displaying ok)
NEverthesless, I think I got Murrays old notes.
Here is my new version of Murrays writing, easiest way I think:
You open up a pre-existing html, say Chicago. Then drag over with pointer to the new jpeg you want (Buffalo). It replaces Chicago with the buffalo jpeg, all links work perfectly. Then do a save as called Buffalo.

Variable with Replacement Path

Hi, I have two queries. The results of the first one should be the input for the second one. E.g. the first query shows a list of personnel numbers and additional information. These personnel numbers shall be overtaken by the second query. The personnel numbers belong to "Dimensions" in the Query Designer. I alread tried to create a variable with replacement path to the dimension personnel number. I implementet this variable in both the first and the second query (under: "rows"). It`s no "Formular variable" and no "Calculated Key Figure" but a "Characteristic Value Variable" of a Dimension. The problem is now that I cannot execute any of the two queries. The error "Abort the query cannot be released for OLE DB for OLAP. System error in programm CL_RSR_REQUEST and form PREPARE_VQUERIES:INVALID_
What is my mistake? Thank you in advance! Eve

Hi Eve,
It is possible to connect the 2 queries using a Replacement Path characteristic variable. You would need to create the variable on the char whose values you want to pass from Q1 to Q2. The variable will be of type replacement path and you will need to enter the name of Q1 from which it will get the values. Make sure that you include this char in the query definition of Q1 and Q2. In Q2 you will restrict the characteristic using this variable. DO not use this variable (replacement path) in Q1.
In your query properties check if you have turned on the checkmark for Release for OLE DB for OLAP (3rd tab). If the check mark is there, then remove it.
We are using the scenario in a couple of places, and it works very well.
Hope this helps...

Creating Variable with Replacement Path to get value from ANOTHER Variable

Hi all,
    Is anyone has created the Variable with Replacement Path to get the value from another User Entry Variable, PLEASE ?
First created the User Entry Variable (ZV_X) and it accepts the date range like '01/01/2009 - 01/31/2009'. Next created the Characteristic variable (ZV_Y) of Replacement Path for which source variable will be ZV_X and we should get the 'FROM Date' (01/01/2009) from the selection (ZV_X) into it (ZV_Y).
While creating the Characteristic variable (ZV_Y) of Replacement Path, I didn't find my newly created ZV_X variable in the list of available variables under 'Variable' header in 'Replacement Path' tab and it is causing the error 'Source to replace variable ZV_Y is not defined'. How could I create the Characteristic variable of Replacement Path for my requirement, PLEASE ?
The following is from help.sap..com:
Replace with Characteristic Value
Text and formula variables with the processing type Replacement Path can be replaced with a corresponding characteristic value. In the variable editor, on the General tab page, you specify under Reference Characteristic the characteristic that is to be referenced by the replacement. On the Replacement Path tab page, you can choose whether the variable is replaced with the From or the To Value and with the Key or the Name of the characteristic value. You can also specify the Offset Start and Offset Length for the output.
Replace with Variable
Characteristic value variables, hierarchy variables, text variables, and formula variables with the Replacement Path processing type can take their values from a different variable.
The following prerequisites need to be fulfilled:
Variable
●      The variable must not be input-ready
●      The variable must represent a single value
Source Variable
●      The source variable must not be a hierarchy node variable
●      The source variable must be input-ready
●      The source variable must be available in the query
●      The source variable must represent a single value or an interval
In the variable editor, on the Replacement Path tab page, you specify the source variable from which the value is to be determined. The value is either determined from the key, the external attribute of the key, the description, or the attribute value. You can specify an Offset Start and an Offset Length for the output here. The variable is replaced on the variable screen upon each data release.
Thanks,
Venkat.

Hi Eve,
It is possible to connect the 2 queries using a Replacement Path characteristic variable. You would need to create the variable on the char whose values you want to pass from Q1 to Q2. The variable will be of type replacement path and you will need to enter the name of Q1 from which it will get the values. Make sure that you include this char in the query definition of Q1 and Q2. In Q2 you will restrict the characteristic using this variable. DO not use this variable (replacement path) in Q1.
In your query properties check if you have turned on the checkmark for Release for OLE DB for OLAP (3rd tab). If the check mark is there, then remove it.
We are using the scenario in a couple of places, and it works very well.
Hope this helps...

Inventory Report-Replacement path for Base UOM to Case and Standrad Cost

Hi, We have a Scenario as below:
Question1:
We have a multiprovider contains 4 infocubes and 2 Master Data objects
a.Demand
b.Inventory
c.Sales Orders
d.In Transit
Master Data objects
a. Material (contains Base UOM to Case as Key Figure Attribute and also Base UOM as an attribute)
b. Material Location (Contains material as an attribute and also Standard Cost as a Key Figure attribute)
At the report level two formula variables are defined with replacement path for showing the Base UOM to Case and Standard Cost in columns.
We have 4 reports on this multiprovider. There is a dialy sales report which gives the following details
Material, Location, MRP Controller, CalDay, Base UOM, Actual Sales(AS), Dependent Demand(DD), Consumption Qyt(CQ), Base to Case UOM, Standard Cost
In this report for all the records the Base to UOM and Standard Cost column is coming with values which is nothing but the replacement path on the material master key figure attribute. Though this report is on the multiprovider all the major keyfigures (AS, DD and CQ) are coming from a single cube( this is an observation from myside).
We have another report which is the Inventory Report with the following details:
Material, Location, MRP Controllder, Calday, Base UOM, Unrestricted Inventory(UI), committed Inventory(CI), Back Order Qty(BOQ), In Transit by Sh/Rec(ITS), In Transit Pipeline(ITP), On Order Qty (OOQ), Current Inventory Position (CIP), Quality Inspection Stock(QIS), Block Stock(BS), Base to Case UOM, Standard Cost
Now in this report for all the records the Base to Case UOM and standrad cost is not showing up. Is there anything which needs to be done in order to get the Base to Case UOM and standard cost for all the records.
Question2:
When Non-Cumulative and Cumulative key figures are combined at the multi provider and also at the report level, will there be any problem?
Regards
Vijay

Hi,
I think you can proceed with virtual characteristics for this.In the code you can truncate the time and you can display on the date:
Regards
Prasad

Formula Variable with replacement path on 0CALDAY

Hi,
I am trying to enhance an existing query.
I am creating a new formula variable processing by replacement path.
In Reference Characterisitic I have choosen 0CALDAY.
In the tab options , I selected replacement path.
In the replacement path tab, in Replacement Rule /replace variable with I am trying to select the variable. But in the variable list I am not able to find 0CALDAY variable, which we have already created and restricting in some other key figures.
Please help me in this regard.
Thanks & Regards,
Madhav

Hey in the replacement path tab you need to choose either its infoobject or variable from which the value needs to be taken.
If you choose infoobject you get the options of choosing its attributes etc.
If you choose variable you get option to choose variable associated.
But under "General Tab" under reference characteristic you need to choose your CALDAY.
Hope this helps.
Edited by: Praveen G on Sep 26, 2008 5:53 AM

Formula variable with replacement path on system date

Hi Experts,
I got a requirement to calculate "Days without payment" in report level.
Days without payment = System Date - Payment Date.
(Payment date field is available in CUBE, but system date field is not available in the CUBE)
As we know, the difference b/w 2 dates is not possible directly.It can be possible by creating 2 formula variables with replacement paths on the dates and by writing aformula on these 2 formula variables.
But the thing is I dont have system date readily available, and I tried by using SAP Exit. But we cant create formula variable replacement path on another variable (SAP EXIT).
Do we have any SAP variable for formula with replacement path readily avaliable to get system date (or) any other suggession.
Please suggest me.
Thanks,
Sai Chand.S

Hi Arminder,
Thanks for your valuable answer.
I tried doing the same previously.As u said we can get system date by creating customer exit variable.
But the thing is to find difference b/w 2 dates, we cant do it directly, we need to create 2 formula variables with replacement path.
1) Var1 = Formula variable with replacement path on system date(custoer exit variable).
2) Var2 = Formula variable with replacement path on paymanet date.
Number of days = var1 - var2.
But as in 1st point, we cant create formula variable with replacement path on another variable, as system date is already a variable of type customer exit.
We can create replacement paths only on characteristics.
Please suggest me .
Thanks,
Sai Chand.S

Formula Variable with Replacement Path - drillup ref.char and still working

Hi all,
I have a requirement, where formula variable (with replacement path) shouldn't work when I remove the reference characteristic from the rows. But this is not the case at the moment
I have 'Brand' and 'Material' in the rows and there is 'Material Indicator' in the columns. This 'Material Indicator' is a formula and there is formula variable in it with the type replacement path.
Reference char is 'Material'; Replace with 'Attribute Value' is selected also. As attribute I am selecting one of the attributes of the 'Material'.
In the report output, I am seeing relevant attribute values when Material is in the rows. But when I remove the Material from the report, I still see the values for this Material Indicator column. But I expect to see blank instead..
Can you please share your comments?
Thanks in advance.
S.P.

hi,
Irrespective of the drilldown on Material, the fomula variable will be replaced by material value. This is how replacement variable should behave. You might have to change the design. For more inputs, let me know your requirement exactly.

Formula variable with replacement path to another input variable

Hi @ all,
i have a question regarding "Formula variable with replacement path to another input variable".
My Problem is that in selection screen and for info-fields the input variable is shown with its key and not with its description.
Scenario:
A formula variable (X) is used to get an input value of a characteristic variable (Y) for 0Fiscper3 to realize a IF-Then scenario.
The formula variable (X) uses replacement path by variable (Y) replace by "key".
In selection screen of the query variable (Y) is named with its key "ZAB_BUPE01" and not with its description " fiscal period". Same as for info-fields where the description is "ZAB_BUPE01" and not " fiscal period".
Does anybody have a solution to display the selection variable correctly?
Regards
Tobias

Issue Solved!
The input varaible (y) for 0Fiscper3 was saved globally on the InfoProvider. This results in that the formula variable with replacement path only shows its technical name. I put the input variable in the query itself and it soved the problem. The variable is displayed with its description in selection screen.
Regards

Formula variable / Replacement path issue

Hi Experts,
I have a Field which has different status description.
I want to bring the count of only one preferred description.
Model Status
A1     New
A2     Open
A3     New
B1     Closed
B2      Pending
B3     New
I want to view only the closed count of models
Model Count of Closed
A1     0
A2     0
A3     0
B1     1
B2      0
B3     0
I tried doing this using the formula variable and Replacement path with Status Field.
But I'm unsuccessful in selection the desired status.
Please help me to over come this.
Thanks

Hi Dear Prasad,
I can't restrict the characterstic to Closed. If I do so the output will be only for Closed.
But here I want to bring every model with value as 0 and 1 for model with closed status.
Hi Dear Raju,
The requirement what I have here is more complex. like, the result will be for 6 month displaying every single cal/day.
and also I have to find out percentage of closed for every cal/day based on number of model we got.
i have only asked a small portion of it, with this input i will manage to build the percentage etc....
I cannot bring counter inside. My report is already too wide to be displayed.
I have tried similar kind of thing, using CKF, Formula Variable and Replacement path with the Char - InfoObj.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/009819ab-c96e-2910-bbb2-c85f7bdec04a&overridelayout=true
But I'm not very sure how do I get only count of the my desired status.
Please help.
Thanks

Replacement Path Explanation

Similar Messages

Maybe you are looking for