Replacement power cord for the K1?

My wife slept on it and it is toast. The K1 is like the red-headed stepchild of the pad world now so I can't seem to find this part. It's like the **bleep** thing never existed.
Anyone know the best place to find a resonably priced replacement?

$14.80 and free shipping on Amazon: http://www.amazon.com/Onite-Charger-Adapter-Ideapad-10-1-Inch/dp/B004XFVYIU

Similar Messages

When I connect my MacBook Air to iPads through a powered USB hub the power cord for the hub explodes and trips the fuse on the building. I've tried different iPads, cords, power points to no avail.

When I connect my mac air to some iPads through a powered USB hub for VPP/Configurator, the power point for the hub blows out (tripping the fuse in the building). I've tried different iPads, cords, power points and of course hubs. Also the computer has a habit of shutting down when any type of USB device is removed from it. Does anyone have any suggestions?

I've done some experimenting, and this is what I've found out:
1) The problem persists when I reformatted the USB HDD devices to ExFAT, so the problem apparently wasn't due to NTFS for Mac OS X by Paragon.
2) The problem persists even when BackBlaze is paused, so I don't think that it's due to BackBlaze.
3) The internet cuts out as soon as data begins transferring either to or from a USB HDD device and won't reconnected until I eject and unplug the device.
4) The problem affects data transfers through either USB port.

Where can I get a replacement power cord for my 13" Mac book, Where can I get a replacement power cord for my 13" Mac book

Where can I get a replacement apple charger/power cord for my 13" Mac book?

here are some examples: https://www.google.com/#q=macbook+magsafe+adapter&hl=en&prmd=imvns&source=univ&t bm=shop&tbo=u&sa=X&ei=i6nhTrvTO6q22gWIpuTcBA&sqi=2&ved=0CHkQrQQ&bav=on.2,or.r_gc .r_pw.r_cp.,cf.osb&fp=e0f7ed75ce37ea0c&biw=1280&bih=679

HT1551 Where may I get a replacement AC cord for the Apple TV?

I need to find a new AC cord for the Apple TV.

I would visit your local Apple store or reseller.

I need a replacement power cord for my Sony Xpold boombox

I need a replacement cord for my Sony Xplod Boombox

Let me check for that. What's the complete model number of your Sony Xplod boom box? Please click here to know how to find the model number. Thanks!

Replacement power cord for imac?

Hi there. Does anyone know what kind of power cord replacement works with an intel imac as I would like to get one with a longer cable than the one it is supplied with?
Many thanks
Rob

5m long enough https://nextd.co.uk/showProduct.asp?ProdRef=96022&prodList=access
Tony

I purchased an airport Extreme from germany. I would like to know if I can use it in the USA, and would I need anything else apart from a new power cord for the same ?

I purchased an Airport extreme from Germany to be used as a router. It worked very well over there and I plan to use it in the States. Now, since the power output is different in both USA and Germany, would I only need to buy a new power cord from USA ?

The AirPort Extreme will run on 100-240 Volts and 50/60 Hz, so it will operate just about anywhere in the world as far as power goes, if you have the right power cord or AC wall adapter. A voltage converter is not needed.
But, European wireless standards are different than the U.S., so you will need to avoid using Channels 12 and 13, which are not authorized for use in the U.S. Otherwise, things should operate OK.
For all the details on wireless standards in different parts of the world, see this document:
http://en.wikipedia.org/wiki/List_of_WLAN_channels

What is the power cord for the airport extreme (A1354)?

What power cord and/or adapter is used for the 2nd and 3rd generation Airport Extremes?

My TC cable has 300v printed along it (just about read if the angle to the light is OK).
Also 120v @ 2.5 amps is roughly 240v @ 1.25 amps, so current draw is less on the higher voltage.
Should be fine, as long as the correct fuses are used in the plug. Which is there to protect the cable from wall socket to appliance and not the appliance itself.

Replacement power adapter for the ZenTouch 2

Can you believe someone stole my power adapter, but not the player itself? WTF?
Gotta love NYC. Anywho, I looked on the site here and did not see a power adapter listed for the ZenTouch 20GB. Anyone know if this exists or not? I saw one for the Zen Nomads, but they didn't list any of the ZenTouch models. Would appreciate some help on this.
Thanks all,
Tim

This one will work. Creative really need to update this page and make it very clear what models this works with.

Where can I purchase a replacement power cord for my mid2010 mac mini?

I cannot seem to find it in the store.
Also, would it be unsafe to keep the cord plugged it but disconnected to the mac mini itself?

The Mac mini 2010 and 2011 models use a standard IEC C7 type power cable. This is sometimes described as a 'figure of eight' type connector.
See this link for some examples. In this case there is nothing specially Apple about the cable.
http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Delectronics&field-keyw ords=iec+c7
Having the cable plugged in to a wall outlet but not a device at the other end is not desirable. While there are no bare metal contacts to touch, if it was fiddled with by a child, or dropped in a liquid bad things could happen.

How can I get a replacement power cord for my Apple Airport Extreme (current generation)?

My cat chewed through the cord because he's not a very bright creature.

Contact Apple Support. It would be a good idea to have your AirPort Extreme model number handy. It is on the bottom of the AirPort Extreme.
http://support.apple.com/kb/HE57

Where can I get a replacement power cord for an Apple TV 2

I want to be able to move my Apple TV from TV1 to TV2 wihtout having to crawl around and unplug it. I can't seem to find where to get a second power cable to accomplish this.
Thanks

Apparently this one works over at Monoprice as well: http://www.monoprice.com/Product?ab3=b&utm_expid=58369800-11.R-enhtUGRrSdHz5vzpV S2g.1&c_id=102&cp_id=10228&cs_id=1022806&p_id=7672&seq=1&format=2&utm_referrer=h ttp%3A%2F%2Fwww.monoprice.com%2FCart%2FIndex

HT201897 Does a Mac Mini purchased in the USA require a power converter for operation in Europe or should I only purchase a different power cord for it?

Does a Mac Mini purchased in the USA require a power converter to operate outside of the USA or can I simply purchase a different power cord for it?

Depending on which European country (should their mains access plug/port shape vary) the
cord set with correct ends on it has to match. You can buy a cord that plugs into the Mini
where the factory cord goes, and the other end has one for the wall source shape. The wire
for the application should be able to support 110~240VAC.
With the cord or an accurate image in hand, you could either get a new cable to match both
realities (mini + wall supply mains local) or an adapter (US/Standard to EU/Local) for just
the head or input part of the original Apple cable. One plugs into the other, then into wall.
If you have a new Mini with a small modular plug/port on the computer end of the power wire,
it would have only two holes and no ground; the other end would have two prongs of equal
shape and size. Not a polarized plug and not a grounded three-prong. To get a replacement
power wire for the MINI to go from power source to the Mini is recommended, if you are going
to be staying in one location for awhile. A Travel Kit that offers no electrical conversion but only
the physical shape adapter kit, should a available in travel stores, airports; big box discount
stores, computer and electronic stores. This page shows the cord end of the appliance shapes.
The other end would be the mains shape for whichever country you are going to....
http://www.signalandpower.com/European-Power-Cords/
So to match the country or regional power mains type is a primary concern for obtaining the
correct replacement cord to supply the Mini with local mains power. The end which plugs into
the Mini is of a certain type (numbers for EU and elsewhere are published, see link + images)
& the end that gets plugged into the mains or utility side, needs to match the local specification.
The link to Apple, to contact for Support and Service information in prior post, should be able
to help find a source for the local replacement type cord they'd sell local people with a Mini.
Apple local sources offer replacements for this purpose; and for travelers, a second cord for
a direct use (not adapter plugs) is a better bet. For those who only need a cord in two places.
If you are traveling to Denmark, UK, Swiss or other EU countries require different adapters.
Even places where the power itself may be somewhat similar. However your MINI has an
automatic power supply that will conform to that energy standard, you only need to supply a
correct non-transforming adapter. Simply a connection to adapt one shape to another.
The general purpose travel kit that is not specialized to Apple power adapters, would have a
plastic plug/adapter with the local pins on one side, and the US/standard two slots on the other.
So, no circuitry nor any other change of electrical power inside this device would be required.
http://www.signalandpower.com/2-Prong-Plug-Adapters/
http://www.signalandpower.com/Convert-to-Europe-CEE-716-plug/
http://www.signalandpower.com/Swiss-AC-Power-Cords/
In other words, I believe my other post already covered this. On the ground on either end of the
path, adapters are common and the Mini does not use proprietary electrical components IF you
have one of the more recent shape aluminum models with the power supply built in. The older
Mini has the power brick and two wires. A US/Standard plug adapter to EU/Local would work in
either case, since all you'd do is plug the adapter plug into the local mains and the US plug into
that one... I see these kinds of discards for as little as 25¢ in thrift stores in Alaska. Or you can
buy a new one. Or you could get a complete cord with correct ends on it, for Mini + local mains.
Hopefully this helps somewhat. The only info missing is which EU country or region is involved.
Their shapes of plug are different, so the adapter end for local supply has to match their standard.
Swiss, Denmark, UK, and others offer different shapes and so on.
The Apple store in the location you are traveling should be able to supply you with a replacement
cable for a modern MINI, that has the correct local mains end, and the correct Apple mini end on
the opposite. Since the unit is automatically switching, the magic is done.
Since I supplied a means to locate any number of Apple stores, authorized service providers &
other Apple related vendors in my earlier reply: https://locate.apple.com/country you could contact
any of them along your route in the City in whichever EU country, to find a local MINI power cable.
In any event, I'm done...
Good luck and happy trails...

Can I buy iMac power cables for the UK?

I am moving to the UK from the US and I have several Apple products. I would like to know if I can buy a replacement cable for each of them (iMac, MacBook Pro, Apple TV, MacBook Air) that will fit into a UK power plug. All are fairly recent purchases (less than 2 years old) and I don't want to replace them. I can fit the World converter plugs on my Ipod and iPhone chargers, but they wont fit on the laptop chargers.
Thanks!
john olson | mandeville, la

All you need is an UK IEC power cord for the iMac (see image) and adapters for the Macbooks and the Apple TV.
The power supply in iMacs, Macbooks and Apple TV is an auto switching power supply that will accept voltage between 100 and 240V
Any standard european IEC power cord will do, you do not have to by one from Apple, but the Apple one as a extra round plastic part that will fit snugly in the iMac. (see second image)
Using a adapter is also an option for the iMac, but they tend to fit loosely on the US plug and can be more easily disconnected than a real European cord. If you go with only adapters, make sure you get good ones that will fit tightly on the us plug.

Power cord for 9216i

I have a customer looking for a replacement power cord for a 9216i.
We need a cord with a C15 female end with a notch in it on one end and the hooded connection C14 connector on the other.
Do we have such a cord available?

The hooded C14 is an IEC cable. If you look in the list you will see that No IEC cables are available for purchase.
The list of supported cables is available here -
http://www.cisco.com/univercd/cc/td/doc/product/sn5000/mds9000/9200_hig/portcabl.htm#wp1058250
You have Three options.
1. Get a pdu that matches your available power cable choices.
http://www.apc.com
2. have a custom cable made
http://www.cypressindustries.com/products/power.html
3. use an adapter - note if you do, please make sure that the cable in the middle supports the needed amperage.
http://www.stayonline.com/searchresult.aspx?categoryid=2317
If you find this helpful, please rate it.
--Colin

Replacement power cord for the K1?

Similar Messages

Maybe you are looking for