Replacement screen doesn´t work :(

Hi guys:
My screen is broken, so I can only see half of it, although it still works. I bought a replacement screen on ebay, with the exact part number as mine, and after replacing it, it only shows a white screen with blurry colours, but nothing clear. I returned it and the second one I received does exactly the same...
I was wondering if any of you here have had this issue as well.
Thanks

To be clear, your original screen was broken in such a way that you could only see half of the display? And both replacement screens show a white screen with blurry colors?
It may be a long shot, but try going to System Preferences>Universal Access and check the "Seeing" Tab. Be sure the Zoom is off and the Contrast slider is set all the way to the left at "normal". If these features somehow got turned on, it might result in a screen that looks like yours. Also check under Displays to see that the resolution and brightness are properly set.
Good luck!

Similar Messages

  • The left part of the screen doesn't work very well

    The left part of the screen doesn't work very well. It's hard to erase a letter, and impossible to me to insert the "P".
    Does it means that I need to replace the screen? Or there is a other solution?

    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new.
    If you've gone through ALL the troubleshooting steps and you're still having the problem, then you most likely have a hardware issue and will need to bring your phone to Apple for evaluation.

  • I have an iPod touch 2nd generation and my touch screen doesn't work, at all. What should I do?

    I have an iPod touch 2nd generation and my touch screen doesn't work, at all. What should I do?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours. I say not worth it for a 2G
    Apple - iPod Repair price                       
    A third-party place like the following maybe less. Google for more. Again, likely not worth it for a 2G
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens         
    Replace the screen yourself if you are up to it
    iPod Touch Repair – iFixit                  

  • TS3992 How can I back up an iphone when I haven't set the phone up for back ups & the touch screen doesn't work? The phone can receive calls (not answer) & the pictures & messages can be seen but touch screen doesn't work to unlock the phone or select any

    How can I back up an iphone when I haven't set the phone up for back ups & the touch screen doesn't work? The phone can receive calls (not answer) & the pictures & messages can be seen but the touch screen doesn't work to unlock the phone or select anything. We want to save/transfer pictures, contacts, and music to the replacement phone.

    Try backing it up to your computer with iTunes.  Connect it to your computer, open iTunes, click on the name of the phone in iTunes, go to the Summary tab of your iTunes sync settings and click Back Up Now.  Also go to File>Devices>Transfer Purchases to transfer you apps and other purchased media to your iTunes library.

  • My palm m105's touch screen doesn't work properly after a sync.

    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    My palm m105's touch screen doesn't work properly after a sync.
    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    Thanks in advance!
    Post relates to: Palm m105
    Post relates to: Palm m105

        Maldoman578,
    Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
    EfrainM_VZW
    Follow us on Twitter @VZWSupport

  • The bottom of my screen doesn't work how do I fix it?

    My screen has been cracked for a while now missing a piece of screen in the top and bottom corners of the device. It has been working fine no problems until last night. I think i layed on top of my ipod touch 4g and now the screen doesn't work right and I can't unlock it. I've tried reseting the device and restoring it and that does not help. Is there a mechanical fix I can do I have a screwdriver for ipod screws I just don't know how to fix it. So basically is there a way for me to fix the screen on my device myself if not where can I send it to, to get it fixed and how much and how long will it take. Thanks for any help!

    No way to fix it. Seems like a bad digitizer.
    Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
      Apple - iPod Repair price             
    You can send it to Apple
    Apple - Support - iPod - Service FAQ
    You can do the exchange at an Apple store
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • I cant open apps on my iPhone 4 the touch screen doesn't work.  I have restored my phone and still nothing works.

    I can't open apps on my iPhone.  The touch screen doesn't work.  I have restored it already but it still won't work.  What can I do.

    If the touch screen is not having any response then you probably have a hardware failure. Take your phone to an Apple Store or authorised service provider to have it checked.

  • My macbook screen doesn't work so I have connected it to the TV and now nothing works, I can't see the dock or the finder bar, no folders on desktop either. I don't know what to do!

    My macbook screen doesn't work so I have connected it to the TV and now nothing works, I can't see the dock or the finder bar, no folders on desktop either. I don't know what to do!

    Do you see anything on the TV?
    If you just see your desktop, then your MacBook is defaulting to extended display mode. Try pressing the Command + F1 keys to see if you get the menu bar and other icons.
    ~Lyssa

  • TS1363 i need to sync my iphone as its damaged ( water submersion) i can't though as itunes is asking me for my passcode and my screen doesn't work, the phones on though still ringing etc ... Please help

    I need to sync my iphone as its damaged ( water submersion) i can't though as itunes is asking me for my passcode and my screen doesn't work, the phones on though still ringing etc ... Please help

    You need to do more research before you make purchases like this. You've wasted your money. The ONLY officially unlocked iPhone model sold in the US is the GSM model, and that model is only sold by Apple. That's the model iPhone you should have purchased.
    Did you read & understand my initial post? Especially this part:
    The unlocking of the GSM portion is just for International travel in order to use local sims. You still have to pay Sprint for the use of their international GSM partner’s network on a “pay as you go basis”.

  • Touch screen doesn't work!!!

    I got my TP two weeks ago, played with it for a day and a half then, in the middle of surfing the web, the touch screen doesn't work. I've contacted HP support and sent my device in for repair. I got it back two days ago (12/30/2011), worked totally fine for 20 mins and the touch screen didn't work again. I've tried using WebOS Doctor 3.0, 3.0.2, 3.0.4 nothing works.
    I've tried rebooting it multiple times, still doesn't work. Frustrating I must say....
    Any suggestions?
    Post relates to: HP TouchPad (WiFi)

    Gotcha, so I just want to make sure I'm following you correctly. At this point the screen is probably all black from the auto-turn-off thing. You hit the power button, and the little yellow lock icon appears on the bottom. But when you try to drag the little lock icon, nothing happens. Does that describe what's happening to you?

  • I have iPhone 5 and the touch screen doesn't work

    I have iphone 5 and the touch screen doesn't work,i want to restart it but my touch screen is not working. I read lots of reviews and support from online all in vain. Please help me fix the problem.
    <Re-Titled By Host>

    Do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the device to boot back up.
    No data is loss doing a reset.

  • HT1212 My screen doesn't work but I want to connect my phone to iTunes. It's not letting me because I have to enter the passcode. What do I do?

    My screen doesn't work but I want to connect my phone to iTunes. It's not letting me because I have to enter the passcode. What do I do?

    My screen doesn't work but I want to connect my phone to iTunes.
    iPhone, iPad or iPod touch: Not responding or does not turn on
    It's not letting me because I have to enter the passcode.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    Restore in Recovery Mode:
    iClarified - iPhone - How to Put an iPhone Into Recovery Mode
    If unsuccessful, try DFU mode:
    iClarified - iPhone - How to Put an iPhone Into DFU Mode
    After restoring, restore from back-up:
    iOS: How to back up
    OR
    Set as new iPhone:
    iOS: How to back up your data and set up as a new device
    Hope all this helps.

  • Exit screen doesn't work

    Hi everyone,
    In screen painter there is the code:
        WHEN 'EXIT'.
          LEAVE PROGRAM.
    But it doesn't exit the current screen. What's the problem? (leave screen doesn't work either.)
    Thanks!

    Hi,
    use this.
    Process After Input.
    Module exit AT EXIT-COMMAND.
    in program.
    Case Okcode.
    When 'Exit'.
    leave to screen 0.
    Automatic field checks can be avoided by AT EXIT-COMMAND, Which works exactly the same way as cancel works on application tols bar.
    EXIT button on the toolbar has FUNCTION TYPE 'E' only function type's can enter a module with addition AT EXIT-COMMAND

  • Mavericks, AppleTV-3, Accessibility Zoom, Zoom Style:  Full Screen, doesn't work at all. Help.

    I'm a teacher using an AppleTV 3 (latest updates) to project & teach FCP X in a large iMac lab. Using my Macbook Pro (late 2011), I could use any of the Zoom, Zoom Styles.  However, since upgrading to Mavericks, I have an issue when projecting my laptop screen to white screen. The problem is when using Accessibility Zoom, Zoom Style:  Full Screen, doesn't work at all. Strangely, Zoom Style: Picture in Picture works fine. I've tried other macs running Mountain Lion, both work without issue. Please help. This is killing my effectiveness.

    George Johnson wrote:
    Is the page size of the PDF 8.5 inches wide? What do you have set for the "Acrobat > Preferences > Page Display > Custom Resolution" setting? What is the pixels/inch spec for your display?
    I have a 13" MacBook Pro. The display is 1280x800 pixels and about 11-1/4 inch wide.
    1280 pixels / 11.25 inch = 113.8 pixels/inch
    When calibrated using the method I mentioned above, my custom resolution setting in Acrobat is 114 pixels/inch, which is close enough to the spec of 113 for this display.
    Yes its 8.5 wide I printed a test page its formatted 8.5 by 11
    Acrobat does a little differently. Word and other applications, for example 100% means to physically see right, & left edge, and top & bottom. you see the entire page without scrolling. an 8.5 by 11 page.  If you want to see 8.5 width you set page width which for Portriat page its 292%
    My monitor settings 1920 by 1200
    DPI system default 131 custom 110
    Also on Mac what you see on screen depends upon the Printer used.  (Just FYI only)

  • I need help with my ipod touch 4, i hit it on my table and now the touch screen doesn't work at all

    i got mad and hit my ipod agaisnt the table and now the touch part of the screen doesn't work i need help, i don't want to send it to Apple because i have music that i downloaded for free and i'm worried all my songs, pics, videos will go away if i send it to them.

    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Maybe just a loose connection they can fix.
    Apple Retail Store - Genius Bar
    Here is how to get your media off the iPod.
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

Maybe you are looking for