Replacement screen for HP mini 110

I need to replace my screen for my hp mini 110-1125NR. Pn VM135UA#ABA. Could you tell me what part I need and some instructions on how to replace?
Thanks!

Hi,
You can use the following link to find out part # for your machine:
   http://h20141.www2.hp.com/hpparts/default.aspx?mscssid=E1CEE3C5CD1648DAB189272C32DC53D1&cc=US&lang=E...
You can also use the following manual to make sure which part(s) you need to order because sometimes you want this you have to buy this ...:
  http://h10032.www1.hp.com/ctg/Manual/c02481106.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Need hard drive model/type for hp mini 110

    Hi,
    I took my hp mini 110-3518cl to IT today and they told me my hard drive was failing and needs to be replaced. What kind of hard drive do I need to buy? I already tried going to system diagnostics but was unable to find hard drive information.
    Product: XZ134UA#ABA
    Thanks in advance for any help!
    This question was solved.
    View Solution.

    Hi
    Please find the link given might help to get the right information. check page 44 Chapter 4 Removal and replacement procedures.
    HP Mini 110-3518cl PC Product Specifications
    Maintenance and Service Guide
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Who has the best replacement screen for a 3rd gen ipad?

    Can anyone recommend where to get a good replacement screen for a 3rd gen ipad?

    Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications. 
    Out-of-Warranty Service
         If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)   
    iPad model
    Out-of-Warranty Service Fee
    iPad mini
    $219
    iPad 3rd, 4th generation
    $299
    iPad 2, iPad
    $249
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
    You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
    iPad Repair & Screen Replacement Services
    http://www.ifixyouri.com/16-ipad-repairs
    RepairZoom iPad Repair
    http://www.repairzoom.com/ipad-repair.html
    Mission Repair
    http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
    iGadgetResQ
    http://www.igadgetresq.com/ipad-repair/
     Cheers, Tom

  • What is the correct part number for the ac-charger for hp mini 110-1191eo (part vj213ea#uuw)?

    I need to find the correct part number for the ac-charger for hp mini 110-1191eo (part vj213ea#uuw).
    This question was solved.
    View Solution.

    Good question.
    That I don't have a definite 100% answer to.
    It probably is OK. Wattage is what it is rated at. More wattage is probably a good thing, and I have read that = or - .5v is not supposed to be an issue.
    You can do a google search of the part number for your power adapter and see if they still carry it, if you are concerned.
    Paul

  • Where can I get a replacement screen for my iPod touch?

    Where can I get a replacement screen for my iPod touch?

    Uer have been pleased with this place:
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    There are many complients about this place.  You can Google and find many.
    DigiExpress.us - The iPad Repair Professionals

  • Use 24 in iMac as a screen for mac mini

    Can I use 24 in iMac as screen for mac mini?

    I can see that there is no way to use the iMac screen thru standard methods.  As the iMac is out of warranty and the DVD/CD drive no longer works I am willing to have the iMac's case opened and have some jerry-rigged solution installed.  Does anyone have an idea as to how that can be done 

  • Where is Paris can you get a replacement screen for and iPhone 5

    where in Paris can you get a replacement screen for an iPhone 5?

    I don't believe Apple stores in Europe replace iPhone screens. I believe they replace the whole phone.

  • 2 GB Memory upgrade for HP Mini 110-3025tu

    I recently bought this laptop HP MINI 110-3025tu
    Specs
    -atom n475
    -1gb DDR2
    My problem/our problem is this.
    When i installed a new 2GB DDR RAM into MINI 110 and turn it on, it show black screen and no LED blink, just power button light on
    then i remove the new RAM and install the original one into MINI 110 and turn it on again, it still got black screen
    Please tell me if i can do something to fix this problem
    Much thanks!
    Joe

    Yes, the issue is with Memory Controller on N455/N475 processor. It is having issue with working, with any and every DDR3 memory module...Here is on going thread, where couple of memory module are listed, that reportly is working...
    http://h30434.www3.hp.com/t5/Hardware/HP-Mini-210-1102TU-Wont-Accept-2GB-ddr3-no-boot/m-p/317562#M32...
    http://h30434.www3.hp.com/t5/Hardware/HP-Mini-210-1102TU-Wont-Accept-2GB-ddr3-no-boot/m-p/318498#M32...
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • How to replace hard drive in mini 110-3131dx

     Trying to replace hard drive in the mini 110-3131DX.....  I have a replacement ... How do I open the case.  I see a orange slider bar  in battery compartment,   but no screws to take out or covers to remove.  It has a solid no opening base except where the battery is removed.
    Thk
    This question was solved.
    View Solution.

    You're welcome, Tim.
    What operating system are you installing on the machine?
    The specs state it shipped with W7 Basic.  That OS should load without issues.
    If you are trying to install XP, it will not install unless you load the SATA ACHI drivers either at the F6 prompt or you need to slipstream them into a copy of your XP installation.
    If you are attempting to install XP, please read this link below and that should solve that issue.
    Your notebook has the Intel NM10 Express Chipset.
    http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/SATA-drivers-for-XP-solution-on-0x000000...
    Best Regards,
    Paul

  • Mac Pro 3,1 Stuck on Grey screen for 1 min during boot

    I have a Late 2008 Mac Pro 3,1 and have started experiencing a very slow boot up.   The computer gets stuck for over a minute on the initial gray screen after the first boot chime.  Once the apple logo finally appears the boot goes normally.  Once running it seems OK.  The shut down seems normal with a  grey screen for a few seconds with the "clock" logo.
    Symptom:
    After the chime I see a blank gray screen for in excess of 1 minute, it used to last only a couple of seconds.
    Once the dark grey Apple logo appears the boot goes at normal speed
    I have a number of different hard drives with older systems and booting from each of then gives the problem - so it does not seem to be system/disc related
    Two partitions (Mavericks and ML) are on SSD's installed on a Sonnet PCIe Card and showed the same problem as the spinning hard discs.
    I tried: (following a trawl of the bb's etc)
    I repaired permissions and repaired all discs for all my boot partitions (10.5, 10.6, 10.7, 10.8 and 10.9) using the appropriate Disc Utility
    Zapping the Pram - this was very strange as I had to keep the cmd alt P R held down for around a minute before the second chime occurred, the time of the grey screen stays stuck
    Resetting the SMC
    Booting in Verbose Safe Mode: Again I had to hold the Alt V down for a minute on the gray screen before the screen went black and the text appeared
    I looked on the console log but could see nothing obvious, additionally from the verbose safe mode boot the text log seems to start from when the grey screen disappears. The time stamps show the boot finishing in well under the minute I wait.
    Any suggestions you may have are very welcome.
    Regards
    Dave

    Thanks The Hatter for that information.  The blank gray screen is now lasting 3 mins before the Apple appears.  When I restarted the system log is as below.  As  you can see there is just over a three minute gap between the shut down and the boot, indicating to me that it is not something in the system software after the boot but a problem at the very start.  It does look like it could be something to do with the hardware as you suggest.  I have verified all the discs with the disc utility and they report as OK and their SMART status is also OK.  I have disconnected the external drives with no change so I will now have to do a thorough check and systematically remove the internal ones but that will have to wait for the weekend.
    I have Mavericks on the Samsung 840 Pro and ML on a Crucial SSD (Crucial_CT240M500SSD1 Media) on a PCIe card.  The Mavericks install I think was an upgrade, not a clean install done quite a while ago.  I only noticed the problem this week when I re-booted in an ML to run some software not compatible with Mavericks.  I have made a system back up as a precaution to an external disc just in case my main drive is dying!
    There are some firmware updates for both the SSD discs that I have not applied these yet but I will leave them out of the mix until I have tried simplifying my configuration with a single disc.
    Apr 21 22:09:26 Davids-Mac-Pro.local shutdown[952]: reboot by _spotlight:
    Apr 21 22:09:26 Davids-Mac-Pro kernel[0]: Kext loading now disabled.
    Apr 21 22:09:26 Davids-Mac-Pro kernel[0]: Kext unloading now disabled.
    Apr 21 22:09:26 Davids-Mac-Pro.local shutdown[952]: SHUTDOWN_TIME: 1429650566 934799
    Apr 21 22:09:26 Davids-Mac-Pro kernel[0]: Kext autounloading now disabled.
    Apr 21 22:09:26 Davids-Mac-Pro kernel[0]: Kernel requests now disabled.
    Apr 21 22:09:26 Davids-Mac-Pro.local Mediatap[297]: XPC error messaging com.apple.IconServicesAgent: Connection interrupted
    Apr 21 22:09:26 Davids-Mac-Pro.local Mediatap[297]: XPC error messaging com.apple.IconServicesAgent: Connection invalid
    Apr 21 22:13:02 localhost bootlog[0]: BOOT_TIME 1429650782 0
    Apr 21 22:13:04 localhost syslogd[18]: Configuration Notice:
      ASL Module "com.apple.appstore" claims selected messages.
      Those messages may not appear in standard system log files or in the ASL database.
    Apr 21 22:13:04 localhost syslogd[18]: Configuration Notice:
      ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
      Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".

  • How can I order a replacement screen for my 2009 MacBook?

    Also, will it be easy to change over? I haved owned this laptop for a little over four years, and the screen whites out unless held at a certain angle. The hardware operates smoothly so I only need to replace the screen. No Genius could fix it. Thanks!

    Same here, the screen washed out, totally white, but the system's running fine.  One gentle tap on the screen, everything's normal again. But things got worse and did not respond to the gentle tap any more, it required twisting the screen a bit and things flickered to normal.  At this point sent it to Apple Service, they quoted Rs 26,000
    (1 US$ = 60 Rupees) for replacing the screen.  The system is already 4 years old, track pad click does not work, disk drive is not without problems and to make things worse the battery requires a replacement and the system is out of all kinds of warranties.
    This made me reluctant to consider salvaging the screen, having researched on the situation, I came out twith the following options :
    Replace the LCD screen at the cost quoted and hope nothing else packs up for the next 2 years at least.
    Connect to external monitor, keyboard and mouse and use it as a desktop with the clam shell closed.
    Download this app 'Air Display' for iOS and OS X, mirror the screen wirelessly to an iPad placed in front of the regular screen (with brightness down to zero) and use it like a normal display but smaller than 13 inch. (there are many more advantages of this app too, for example, it works as a touch screen for OSX...ever heard of it ?)
    last but not the least, do nothing about this, and things seem to work fine all of a sudden since the last 10 hours, i'm currently typing this text the regular way I did since Aug 2009 !!
    But realised one more thing, that the system is getting hotter in the charging end, more than ever before, does it contribute to the worsening of screen / white out / frozen screen but not a brain dead computer)
    Will let you know if things hold on this way for long.

  • Where can i find a replacement screen for my 30 inch cinema LM300W01

    Hi, my cinema has a broken screen and I would like a replacement screen, i would like to know where i can find one.
    Can anyone help me, my monitor is in perfect condition and needs a new screen.
    Thanks
    [email protected]
    Message was edited by: crwoo

    Personally I would let well enough alone if that is the only flaw. Also it is best to replace the display panel with an exact duplicate. Usually the motherboard is different if you have the higher res screen and they are not compatible. In other words, your motherboard/video card is different than a laptop with the high res screen, probably. The cable will fit...LED is LED, but the screen will look funky if they are not compatible. So really this is not probably your opportunity to upgrade the screen. Here is your exact replacement on amazon.com at $66 which is a very good deal:
    http://www.amazon.com/HP-641629-001-Laptop-Screen-1600x900/dp/B005NBNTJU
    Apparently they will not say whether you get glossy or matte, but at that price who cares?.
    Here is the description of the panel with the full HD resolution:
    17.3-in, AntiGlare, FHD, LED, display panel for use only with computer models equipped
    with an Intel processor
    656297-001
    http://www.screentekinc.com/HP-656297-001.shtml
    They do not give the price, you have to call. It might work but can't guarantee. Partsurfer is not giving a price for either part but based on past experience, somewhere over $200 is a good guess.

  • Correct display settings for hp mini 110

    can someone please tell me what the correct display settings are for the hp mini 110? thank you!

    @ebernier ,
    Hello and thank you for posting on the HP support forums.  Please check out the following link it will help you when posting so that we can help you better.
    Advice for asking the "Very Best Question"
    As for correct display setting.  What ever setting you find most comfortable is the best.
    Please post back if you have any more questions.  As well include your full model and product number.
    HP Notebook PCs - How Do I Find My Model Number or Product Number?
    Thank you again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • Work a iPad mini as screen for Mac mini?

    I Have a iPad mini 1 and I think about to buy a Mac mini, could I use the iPad as the screen for the Mac?
    best regards

    There are apps that allow you to use an iOS device as a secondary screen for a computer. Search the App Store. Here are some:
    http://www.extremetech.com/computing/138762-how-to-use-your-ios-device-as-your-p c-second-display
    There are also apps that allow you to control a computer using the iOS device. Some are the free for non-commercial use TeamViewer and the paid GoToMyPC and LogMeIn

  • Replacement screen for: Satellite C8550 S5110

    Have bought the following laptop in the USA:
    http://www.toshibadirect.com/td/b2c/jsp/catalog/retail-product.jsp?poid=2000050575
    Am back in Australia  and the screen is cracked and needs replacing.The model numbers are different here and Toshiba Australia do not know the part number for a replacement screen on this model
    Anyone got any ideas how to get this-  have had a global run around this morning!
    Jeff

    Hi buddy,
    Normally the LCD is always the same part but if you want to make sure you get the correct LCD you should ask an authorized service provider in your country. The guys have access to Toshiba database and can search for exact part number and can order this screen for you.
    You can find a list of ASPs here:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider

Maybe you are looking for