REPLACEMENT WIFI ANTENNA FOR F4580 DESKJET ALL IN ONE PRINTER

HI I WONDER IF ANY OF YOU GUYS AT HP CAN TELL ME WHERE I CAN GET HOLD OF A REPLACEMENT WIFI LEAD/ ADAPTER/ ANTENNA TYPE LEAD THAT PLUGS INTO THE BACK OF MY DESKJET F4580 ALL IN ONE PRINTER , ITS SORT OF 8mm SQUARE IN SHAPE THANK YOU FOR YOUR TIME

Was the printer purchased on one country but you are in another?  If so you will need to Contact HP to request a "Regionalization Reset". There should not be any charge for this, it is covered as part of the cartridge warranty. You will need to have access to your computer and printer while on the line with HP. You will also need to have a set of cartridges for the new region, once the reset is complete cartridges from the original region will no longer work.  HP's web page on the subject is here.
You can find the correct cartridges for your area from the HP SureSupply site.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • DeskJet All in One printer cartridge compatibility

    Hi there. I hope you can help me. So my dad gave me this wonderful printer, the DeskJet 2544 all in one. Unfortunately, the tri. Color cartridge ran out. I was about to shop online on the HP website but there was no 301 tri color CH562E like the one installed on mine. I was thinking if I can buy other cartridges that can be an alternative? For example, the deskjet 2540 all in one uses HP 61 cartridge. Can I order and use that?<br><br>Also, what is the difference of a deskjet all in one printer and a DESKJET INK ADVANTAGE all in one printer? Can I use cartridges from that?<br><br>Thank you. Looking forward for someone to help.

    Was the printer purchased on one country but you are in another?  If so you will need to Contact HP to request a "Regionalization Reset". There should not be any charge for this, it is covered as part of the cartridge warranty. You will need to have access to your computer and printer while on the line with HP. You will also need to have a set of cartridges for the new region, once the reset is complete cartridges from the original region will no longer work.  HP's web page on the subject is here.
    You can find the correct cartridges for your area from the HP SureSupply site.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How to reset Deskjet All in one printer 2645 to its default setting?

    how to reset Deskjet All in one printer 2645 to its default setting?So I can change the paper size.

    We have difficulty in using the printer for "photocopy" purposes. This is because our printer doesn't have "specific options" for paper sizes. When copying, the only option default in our printer was : A4 plain, A4 photo & 4 x 6.. Our question is, how can we have the "specific options" for paper sizes ( legal, letter, or A4 size )? Do we need to "restore to defaults" our printer? Can you give us a step-by-step instructions to deal with our problem? Thanks.

  • Re-install software for the C6280 all in one printer... get an error message "can't find file"

    need to re-install the software for the c6280 all in one printer. downloaded the latest install package from the HP web site. During the install process, I get an error message .. can't find  user/appdata/local/temp/7z256315/setup/.....setup/blocksysuser........
    the folder 7z256315 does not exist on the HD.
    I also get a message that it can't find PS_A10_02_software.msi.
    Windows 7 , C6280 all in one printer. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via wireless to the router.
    hope you can help
    thanks
    charlie
    This question was solved.
    View Solution.

    Hi cberistain, 
    Follow the steps below, and let me know what happens?
    Step one: Clear temp directory
    Type %temp% in the run or search for programs and files field
    Highlight all the files in this folder, and then press the delete key to delete. If you get a message that the file is in use you will need to skip this file(s).
    Continue with Step 2 below
    Step two: Downloaded and extracted to your system:
    1. Download the full feature software and drivers
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-77039-1&cc=us&dlc=en&lc=en&...=
    2. Once the download is finished double click on the file to extract the software.
    3. When the installation window opens press the cancel button to stop the installation
    4. Type %temp% in the run or search for programs and files field
    5. Look for, and open the folder starting with 7z (Example: 7zS2356)
    6. Right click on the folder, and select Copy
    7. Close that window, and all your open windows, and then in the middle of the desktop right click your mouse, and select Paste. This will move the 7z folder to your desktop.
    8. Open the 7z folder you just copied to your desktop
    9. Open folder Util
    10. Open folder CCC
    11. Run the uninstall_L4
    12. When the uninstall has completed restart the computer
    13. Run Disk cleanup from Accessories\ System Tools folder under all programs
    14. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
     15. Open the 7z folder, and then double click on the Setup.exe file which will be toward the bottom of the open window. Follow the on screen instructions to reinstall your printer.
    Let me know if you are able to successfully install the software and driver, and are able to print & scan?
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Driver for HP 6110 All in One Printer for MAC OS X 10.6.8

    Your Search: Is the driver for HP 6110 All in One Printer the same for MAC OS X 10.6 as for MAC OS X 10.6.8? 

    Hi JCWG. To answer your question, Yes the driver is the same.  Do you have questions about the install? Just in case you need it, here is the link to take you to the download of the software and drivers.  http://goo.gl/njt723;
    If you have any other questions, please feel free to write back
    Thank you
    Waterboy71
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Why do I have to continuall​y redown load the driver for my c6180 all in one printer every few months

    why do I have to continually redown load the driver for my c6180 all in one printer every few months

    Please read this post then provide some details.  What operating system? Are there any error messages on the printer or computer screen when printing fails?
    Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Setting up WiFi for a 7280 All-in-One Printer

    I have a C7280  All in One printer.  I set up the wireless but cannot find instructions to set up wifi on the printer.  The book that came with the printer does not address wifi.  Is it possible to download anything to enable the printer to be wifi?

    Hi,
    Please download the following tool and run on your Windows 7 or 8/8.1 machine:
       http://ftp.hp.com/pub/softlib/software12/COL50403/mp-122330-1/hppiw.exe
    or using the following instructions:
       http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02722089&tmp_task=solveCategory&cc=us&dlc=en&lc...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Looking for HP Basic Driver only for hp 2610 all-in-one printer

    I have windows 7( Just recently installed) and a HP 2610 all-in-one printer.
    I just wanted to download the printer driver only and not the HP Photosmart and office software Suite.
    This webside say the printer driver only is availble as a separate download named "HP Deskjet Basic Driver"
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76831-1&lc=en&dlc=en&cc=us&...
    But I cannot locate the webside for the Basic driver only for Windows 7 OS. Can somebody locate the web address of "HP Deskjet Basic Driver" for me please.
    Regards
    Tech

    I just tried using Notepad as you suggested and had the same result.  Paper feeds in stops at proper place and error message "out of paper" 
    I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem. 
    I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner.  One for black and one for color.  The ink icons would change from completly full to just an outline as the amount of ink went down.  Currently the black ink icon is missing
    This is a very frustrating problem because the printer works great after doing a few steps to get around the problem.  The fact that the problem reoccurs any time anything is changed is the major problem
    Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs.  This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
    I want to thank you for all of your efforts.  Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer.  As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

  • Looking for a new all in one printer

    Our m2727 all in one printer has died.  It had a pretty good run so we are looking for another HP.
    This printer gets a pretty good workout. 
    Any suggestions?  B&W.  Must have scan and fax capability.  Need something reliable obviously.
    thanks!

    ChrisPbass,
    I would suggest contacting HP Home & Home Office. They will be able to narrow down the field to what would be best for your particular use. There number is below.
    1 (888) 999-4747.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Need installer for HP e-all in one printer d411c for Mac OS 10.8.1

    I am unable to setup my new HP e-all in one printer d411c on my MacBook Pro running Mac OS 10.8.1.  Where can I down load driver for the printer?

    I would look on HP's site first. Maybe here http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-107206- 1&cc=us&dlc=en&lc=en&os=219&product=5150158&sw_lang=

  • WINDOWS 2008 R2 DRIVER FOR OFFICEJET 4610 ALL IN ONE PRINTER

    i am using hp officejet 4610 all in one printer. I need windows 2008 r2 driver for this.
    please help
    saleem

    Hello Saleem,
    Welcome to the Forums
    I have checked the available drivers for your Officejet 4610 and did not see an available driver for Windows 2008 R2. I will post you the link to the drivers that are available below.
    HP Officejet 4610 All-in-One Printer Drivers
    Best wishes,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Print Head for our C7280 All In One Printer

    We have a C7280  All in One Printer in the office/  Our repairman told us to order all new color cartridges for it before he could fix it.  We did that, however, today he told us the print head was bad and that we would be better off to buy a new printer than fix the C7280.  He told us he could not get parts for our printer anymore.   If it is the print head, can this printer be fixed? 

    That is the only way you can clean the ink cartridges. I would recommend contacting HP technical support for further assistance. Click here to find out: HP Worldwide Contact.
    Good luck.
    I worked on behalf of HP.

  • How to download repair of "missing WIA" for officejet J4550 All in one printer

    officejet J4550, all in one
    Problem:  message states "missing WIA"
    I'm missing my installation disk and would like to download the solution to repair/update/install the WIA.
    how to download repair of "missing WIA" for officejet J4550 All in one printer

    HI knewsomga,
    WIA is Windows Image Acquisition, it is a proprietary Microsoft driver model and application programming interface (API) for Microsoft Windows Me and later Windows operating systems that enables graphics software to communicate with imaging hardware such as scanners, digital cameras and Digital Video-equipment. - Source
     Please follow the instructions below.
    Please hold down the windows flag key and the R to open the Run box.
    Type services.msc and press Enter
    Locate Windows Image Acquisition (WIA)
    Right click and open Properties
    Stop the service from the General tab and then Start it again
    Verify that the Startup type is set to Automatic rather then manual
    Also, look for 'Shell Hardware Detection' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically from its properties.
    Locate the 'Remote Procedure Call (RPC)' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically as well.
    If the issue persist, the HP Print and Scan Dr might help, otherwise I suggest contacting Microsoft.
    Click here to download and run the utility > HP Print and Scan Doctor
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Receiving a false paper jam error message for a 6310 all in one printer

    I have an hp 6310 all in one printer.  It is showing a false paper jam error message with no paper in the printer.  I have tried all  of the fixes that have been suggested on the website as well as on you tube to no avail.  Nothing works, I have cleaned all of the parts that have been suggested to clean and reset the printer. I am still receiving the same paper jam message with no paper in the printer.  Does anyone have any suggestions to try to fix this printer. 

    Do you here any clicks or other sounds when the 6310 first starts up?
    I'm trying to fix false paper jam error on Sharp Fax/copier,F0-4450.
    When researching the problem, found suggestion that a bad solenoid could cause that error. 
    After completely disassembling the copier found that wasn't the problem.
    I here 2 clicks during start up that sounds like gear slipping a tooth, as if something is preventing a shaft from turning.
    Back to the drawing board.
       UPDATE!!! Took fuser out, turned gears with screwdriver til 81/2x11 paper went thru, lubricated ends of fuser roller with powdered graphite lube.
    3 page fax came thru.

  • Looking for Lion compatible All-in-One printer

    Looking for MacBook Pro Lion compatible All-in-One color printer for my Mom who is 77 and on a limited income when it comes to purchasing ink. Preferred options include wi-fi, auto duplex, memory card slots, easy to operate. I was leaning toward a Kodak printer but majority of reviews indicate when any one of the ink cartridges is empty no more print jobs will process until the empty cartridge is replaced. In addition, folks indicate even though ink is less expensive, replacemnet is more frequent indicating that perhaps the cartridge capacity is smaller in size. Both are deal breakers. Canon PIXMA MX892 Wireless and the HP Envy series both appear impressive but I am confused regarding compatibility with Lion. Appreciate experienced recommendations, Thanks

    ChrisPbass,
    I would suggest contacting HP Home & Home Office. They will be able to narrow down the field to what would be best for your particular use. There number is below.
    1 (888) 999-4747.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Maybe you are looking for

  • How do I import music from a portable hard drive to my iTunes library?

    I have a portable hard drive with music on it. I have been successful in Importing Files from that external drive to my iTunes library and can play the music on my PC. However, when I sync my iPhone in an attempt to load those new songs, those songs

  • Is there anyway to add a watermark to my photo in iPhoto?

    Or, do I have to use another photo editing software for this? I could do this in PSE, but would find it easier to do directly in iPhoto. Any suggestions?

  • Cannot display fullscreen.

    I have several movies that were exported into iTunes and from there to the Apple TV. However none will play fullscreen. They all have ugly large black bars on top, bottom, sides. When I show trailers then I do have fullscreen picture. My TV is a LCD

  • EyeTV Skips While Recording

    I just got an EyeTV hybrid USB tuner for my iBook G4 which runs Tiger (specs are on my footer) and I have problems with it when I record. It often skips and jumps (doesn't record every frame) when it records and makes the videos look like crap. This

  • How to catch errors watched in sxmb_moni through abap program??

    Dear Gents, I have one scenario which is proxy -> xi -> jdbc. Scenario works fine when every thing is good, but if there are any errors in XI usually we catch the exception after calling the proxy as : TRY.     CALL METHOD cl_rfq_sapin->mios_rfq_sapi