Replacing a cd reader with the cd R/W - DVD

IHi,
I am about to replace my read only cd player in my 2613-CTO Thinkpad with an IBM cd R/W dvd player.
I was wondering what teh correct drive is to do this as well as any insight into if any drivers/updates are necessary to complete the install.
I thank you in advance,
Kurt

Hello,
It looks like you have a configured-to-order (custom) T60p (machine type: 2613), is that correct?
If that is correct, than the machine has an UltraBay Slim device bay, which has a Parallel ATA (PATA) connector for optical disc drives. One model that will work in there is the ThinkPad Super Multi-Burner Ultrabay Slim Drive (Marketing P/N 40Y8623). Another is the ThinkPad DVD Ultrabay Slim Burner (Marketing P/N 41N5643).
I suspect there are other models which will work as well, but check with the seller to see if the model is compatible with the ThinkPad T60 series.
My ThinkPad T61p came with a drive that could write both CDs and DVDs, so I did not have to install any additional software or drivers. Lenovo does offer some firmware updates for CD and DVD drives, but whether or not you need to install one depends on which model you purchase.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

How do I replace low res media with the hi res version of the same media?

How do I replace low res media with the hi res version of the same media without doing all my work all over again?
Message was edited by: Lemmontage

Assuming you used Smart Objects, just replace contents with the highres file.

I wanted to know if i were to come into an Apple store, would you be able to replace my home button with the new one that i bring in?

I wanted to know if i were to come into an Apple store, would you be able to replace my home button with the new one that i bring in?

Nope, since no one here works for Apple I doubt they would let us behind the counter or use their tools.
Do a google search to locate your local store and get a phone number-then call and ask.

When I use voice over to read an epub in my Ibooks app, which is in Dutch, sometimes he start reading a book with an English Female voice and some books he reads with the Dutch male voice (which is good). All my epubs are Dutch books. Can i fix this probl

when I use voice over to read an epub in my Ibooks app, which is in Dutch, sometimes he start reading a book with an English Female voice and some books he reads with the Dutch male voice (which is good). All my epubs are Dutch books so the English voice sound terrible trying to pronounce Dutch. Can i fix this problem? Thanks, Tom

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Replacing BM on NW with the ISP firewall and NAT

Replacing BM on NW with the ISP firewall and NAT
Hi!
LAN is a tree with 3 servers:
1. NW 6.5 sp8 + BorderManager 3.9 sp 2
2. NOWS SBE 2.5 (Suse) - DNS\DHCP
3. NOWS SBE 2.0 (Suse)
Since I'm connected to the internet through my ISP router (XBOX- Checkpoint), I am considering to remove the first server (firewall) and ask my ISP ro configure the router as a firewall and NAT too.
What are the steps needed to do it without any demages?
TIA
Nanu

nanu,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Preprocessing xml to replace all xpath references with the referred elements

Hi,
Is it possible to sort of pre-process xml before querying such as we replace all internal xpath references with the referred elements?
So below is the xml and as we see the typeId element of second app.test.module.library.Publisher element refers to the typeId element in the first app.test.module.library.Publisher element through xpath reference . Seems this is done by XStream(which we
use for xml-java) to reduce the size of resulting xml. This is all fine and in java one can easily traverse through such xpath references, but the challenge i am facing is in sql where i use node() function to get each of app.test.module.library.Publisher
element and fetch value of selectedText element of both the children of app.test.module.library.Publisher - (typeId, regionCode).
declare @publishers xml
set @publishers = '
<publishers>
<app.test.module.library.Publisher>
    <typeId>
      <selectedId>101</selectedId>
      <selectedText>Book</selectedText>
    </typeId>
    <regionCode>
      <selectedId>102</selectedId>
      <selectedText>NWD</selectedText>
    </regionCode>
</app.test.module.library.Publisher>
<app.test.module.library.Publisher>
    <typeId reference="../../app.test.module.library.Publisher/typeId" />
    <regionCode>
      <selectedId>101</selectedId>
      <selectedText>UWY</selectedText>
    </regionCode>
</app.test.module.library.Publisher>
<app.test.module.library.Publisher>
    <typeId>
      <selectedId>100</selectedId>
      <selectedText>Deposit</selectedText>
    </typeId>
    <regionCode>
      <selectedId>100</selectedId>
      <selectedText>WHU</selectedText>
    </regionCode>
</app.test.module.library.Publisher>
</publishers>';
select typeId = el.e.value('(typeId/selectedText)[1]','varchar(max)')
      ,regionCode = el.e.value('(regionCode/selectedText)[1]','varchar(max)')
from @publishers.nodes('/publishers/app.test.module.library.Publisher') as el(e)
If you execute this, the second typeId value will be null but ideally I should be able to reach to the reference, which is typeId of first app.test.module.library.Publisher element and should be able to fetch selectedText of it, which is correct value (Book).
In other words first two app.test.module.library.Publisher elements are of same type (Book).
Since I am not able to find the way to do it, I thought I should have some way to process this xml to replace all such references with the referred element and that will eliminate the need to go for tedious xpath reference based access.
Thanks

I was able to get a result using dynamic SQL, but my guess is if you have more complicated examples it probably won't work. I also make an assumption you know the full path of the first reference you want. Anyway, try this:
DECLARE @xml XML = '<publishers>
<app.test.module.library.Publisher>
<typeId>
<selectedId>101</selectedId>
<selectedText>Book</selectedText>
</typeId>
<regionCode>
<selectedId>102</selectedId>
<selectedText>NWD</selectedText>
</regionCode>
</app.test.module.library.Publisher>
<app.test.module.library.Publisher>

<typeId reference="../../app.test.module.library.Publisher/typeId" />
<regionCode>
<selectedId>101</selectedId>
<selectedText>UWY</selectedText>
</regionCode>
</app.test.module.library.Publisher>
<app.test.module.library.Publisher>
<typeId>
<selectedId>100</selectedId>
<selectedText>Deposit</selectedText>
</typeId>
<regionCode>
<selectedId>100</selectedId>
<selectedText>WHU</selectedText>
</regionCode>
</app.test.module.library.Publisher>
</publishers>'
-- So you basically need to create and execute this string;
-- but how do you work out the first bit of the string ?
--SELECT @xml.query('(publishers/app.test.module.library.Publisher/typeId/../../app.test.module.library.Publisher/typeId)[1]');
DECLARE @fullPath NVARCHAR(MAX) = 'publishers/app.test.module.library.Publisher/typeId/@reference' -- the full path of the reference
DECLARE @shortPath NVARCHAR(MAX) = LEFT( @fullPath, CHARINDEX( '@', @fullPath ) - 1 ) -- full path without attribute name
IF @shortPath IS NULL
RAISERROR ( 'Unable to get @shortPath.', 16, 1 )
-- Start processing the XML
DECLARE @sql NVARCHAR(MAX), @reference NVARCHAR(MAX)
-- Extract the reference
SET @reference = @xml.value('(publishers/app.test.module.library.Publisher/typeId/@reference)[1]', 'NVARCHAR(MAX)')
-- Construct the sql
SET @sql = 'SELECT @xml.query(''(' + @shortPath + @reference + ')[1]'')'
-- Execute the SQL
EXEC sp_executesql @sql, N'@sql NVARCHAR(MAX), @xml XML', @sql, @xml
Post back any issues you have with that approach and your real data.

Is there a limit on the size of SDHC card that can be read with the iPad camera connectioin kit?

Is there a limit on the size of SDHC card that can be read with the iPad camera connection kit?

I've successfully connected 32 gig SDHC and CF cards so if there is an upper limit, it's at least 32 gig.
I know SDXC will not work.
With the cards that don't work, have they been formatted correctly? the camera connection kit will only read cards holding images. (Well, it'll only see the images) And those images have to have a file name of exactly 8 characters (DSC_2342 for example) and they have to be in a folder named DCIM.
Anything else it wont' read.
I put a photo on there called 'Christmas' and the connection kit won't see it. I put a photo on there in the DCIM folder named XMAS2342 it'll see that.
So it's possible that those cards weren't read because they weren't speaking the right language.

Separated trace file which I can read with the log viewer

Hi All,
I 'd like to write trace infomation.
I know I can use the default trace.
But I 'm looking for a way to write my application information in a separated file,
which I can read with the log viewer.
Can someone help me with this
Thnaks
Steve

Hi epexpert,
thaks for your reply.
I tried it with the Filelog.
The Problem is that it logs to the file (its not problematically) but also to the defaulttrace
and thats not my preferred solution.
Do you have any other ideas?
Bye Steve

How can I replace my iTunes Library with the contents of my iPod, including the playlists?

I tried transferring the purchases, but it didn't move my playlists over. I have also tried backing my old library up to a disc, and putting it in my new computer, but it still didn't transfer my playlists.
Is there any way I can transfer my old itunes library from my old computer to my new computer, including the playlists?
I have heard people talk about replacing itunes with the contents of the ipod, but I'm not sure how to do it.

check out this post by Zevoneer.
if you have an iPod Touch, there are PhoneView and iRip.
as for playlists, check out the posts by Chris CA in this discussion.

Replace old iPhone 3G with the new iPhone 4S ?

I have been having some problems with my old iPhone 3G - bought from outside the US -
and want to get it replaced.
Does anyone know if Apple will replace this old iPhone 3G with the new iPhone 4S ?

Hehe not a chance. There have been a few that got a new 3GS as a replacement but even those are rare.

SQL to read with the DISABLE STORAGE IN ROW set

I am having problems inserting a clob > 4k. I have changed my default setting to DISABLE STORAGE IN ROW. The problem is, when my clob
4k, I get a null pointer exception on my read. THE INSERT:
insert into XML_W_BOOKING (WORKCONVERSATIONID, FREQUENTFLYERNUMBER, XMLSTRING)values(WORKCONVERSATIONID_SEQ.NEXTVAL, pCntr.frequentFlyerNumber, EMPTY_CLOB());
THE UPDATE:
PreparedStatement pstmt = this.connection.prepareStatement("update XML_W_BOOKING set XMLSTRING = ? where WORKCONVERSATIONID = ?");
pstmt.setAsciiStream(1, new StringBufferInputStream(pCntr.xmlString), pCntr.xmlString.length());
pstmt.setLong(2, pCntr.workConversationId);
pstmt.executeQuery();
pstmt.close();
THE READ:
myContainer.workConversationId= pRset.getLong(1);
myContainer.frequentFlyerNumber=pRset.getLong(2);
java.sql.Clob clob = pRset.getClob(3);
int c;
int length = new Long(clob.length()).intValue();
StringBuffer strBuf = new StringBuffer(length);
BufferedInputStream bin = new BufferedInputStream(pRset.getAsciiStream(3));
while((c = bin.read()) != -1){
strBuf.append((char)c);
String str = strBuf.toString();
System.out.println("str: " + str);
myContainer.xmlString = str;
Any suggestions? Is there a special sql statement I should be using to read when the "DISABLE STORAGE IN ROW" setting? I am using Oracle 8i and wls 5.1.
IP: Logged
null

Enable/Disable storage in row is used for LOB columns. If enable storage in row is specified and the length of the LOB field is less than 4K then the LOB is stored along with other table data, else it is stored in a seperate segment. If disable storage in row is specified then LOB data is stored always in a seperate segment. When the LOB is stored in a seperate segment the storage parameters are determined by the values specified for CHUNKS and PCTVERSION. One chunk stores only one LOB data even if enough space is aavailable in the chunk. If the size of LOB data is small then enable storage.
To calculate the space used by the tables use the query below
For Table Data
select segment_name, sum(bytes) from user_segments where segment_name in ('TABLE', 'TABLE1', 'TABLE2') group by segment_name;
For LOB's
select segment_name, sum(bytes) from user_segments where segment_name in (select segment_name from user_lobs where table_name in('TABLE', 'TABLE1', 'TABLE2'))
group by segment_name;
Jayant

I want to compare two columns and replace any equal values with the value in a specific cell

I want to compare the numbers in two columns and replace all matching numbers in the second columns with the corresponding value from a cell in the same row as the matching number.

Me too.
Barry

HT4101 I have used my SD card reader with the lightning connector just fine until this awful OS 7 update! Now nothing works and all I get while trying to load pictures from my SD card to my iPad is that my device is not supported!

Anyone having the same problem with the new OS7? I can no longer load pictures from my SD card to my iPad using my adapter.

Are the card readers apple ones or knockoffs? Unfortunately iOS7 brought with it software that looks for the authentication chip in the cables and docks. If the manufacturer got permission from Apple to make devices then it should be fine, but if the manufacturer didn't get apple's permission then their chip isn't recognized, generating that error.
If your connectors are Apple ones have you tried to reset your device? Hold down the sleep and home keys for about 20 seconds or so until your iPad reboots. Then try again.

Upgrading To Tiger From 10.3.9 With The 10.4 Install DVD

I got my G5 in May, 2005 just as Apple was releasing Tiger so a 10.4 Tiger install DVD disc was included in the box. I have 10.3.9 and have had very few problems. But if I do want to upgrade to Tiger in the near future, will the 10.4 install DVD disc be sufficient (albeit with probably having to install many software updates) or would it be better to purchase the 10.4.6 DVD disc that Apple has in their store?
Thanks,
David

In addition to the above, follow the tips in http://www.macmaps.com/upgradefaq.html and http://www.thexlab.com/faqs/installswupdates.html. The smartest of which are to properly prepare your current installation by installing the latest updates or, if you have, rerun the 10.3.9 COMBO update, repair permissions, and make a bootable backup. Then, and only then, update to Tiger, using the update previous version option.

How do I copy slideshow with the music to a DVD?

How do I burn a slideshow with the music (from iTunes) to a DVD - can't seem to get the music to go with it.
Thanks for any help.

Provided the external is suitably formatted, Just drag and drop from their location on the Mac to wherever you want them on the external.
Or are you meaning moving an iPhoto Library?
http://gadgetwise.blogs.nytimes.com/2011/03/02/qa-transplanting-you-iphoto-libra ry/

Replacing a cd reader with the cd R/W - DVD

Similar Messages

Maybe you are looking for