Replacing a german version with a united states version

I really don't want to delete my mozilla web browser because I really managed all my tabs and I dont want to change or lose them. however I downloaded mozilla when i lived in Germany and I am now having a hard time trying to switch it over to the US version so I don't always need the english language pack "add on". Is there anyway I can do this without deleting everything to then redo it all?

Note that Firefox 36 has been released (possibly throttled until Friday), so you can install the Firefox 36 en-US version.
You can find the full version of the current Firefox 36.0 release in all languages and for all operating systems here:
*https://www.mozilla.org/en-US/firefox/all/
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
*http://kb.mozillazine.org/Profile_backup

Similar Messages

How do I replace low res media with the hi res version of the same media?

How do I replace low res media with the hi res version of the same media without doing all my work all over again?
Message was edited by: Lemmontage

Assuming you used Smart Objects, just replace contents with the highres file.

TS1424 Is it possible to make purchases from canadian itunes store with a united states iTunes account

Is it possible to make purchases from canadian itunes store with a united states iTunes account.

No. You can only purchase from the US iTunes Store.
Regards.

Were can I get either MacBook Pro or Mac-air with English united state style keyboard, in Japan

Were can I get either MacBook Pro or Mac-air with English united state style keyboard, in Japan

Hi Melophage,
Thank you very much for your response. I have a similar question to the one Abraham has, but applied to an offline Apple Store, say, the one in Ginza.
I will have little time in Tokyo, and would like to get a MacBookPro with a US or Int'l keyboard (with or without Hiragana, I don't really care as long as there are English letters on the keyboard) off the shelf from an offline store. However, I keep getting conflicting responses from both within Apple and on forums.
There's an option to get a US keyboard when ordering from Apple online, and that's fine. How about the in-store pickup option? Is there one, or will there be a MacBookPro with an English keyboard if I just show up at a store one day soon?
I would greatly appreciate an answer if you have one. Thanks in advance!

Can Apple replace iMac 24" drive with a solid state drive?

Can Apple replace my early 2009 iMac 24" drive with a solid state drive?

An Apple Store will most likely refer you to a local Apple Authorized Service Provider for that type of work.
Go to > Support > Find an AASP > click the Service Box > enter your Zip code and call some of those AASP's to see which one's do that type of upgrade.

Camera Raw 7.3 Update replaced Photoshop CS6 Standard with CS6 Extended Trial version

How do I get back to Photoshop CS6 Standard edition after Camera Raw 7.3 update?
After installing the Camera Raw update photoshop now runs as the Trial version of Photoshop Extended.

I upgraded CS6 and Lightroom 4 today and then when restarting Photoshop CS6 this evening I get a dialog about registering with my e-mail for Photoshop Extended Edition Trial.
I have never owned the Extended edition and did the update from my existing product using the Adobe Update manager. There should have been no reason for this mistake to occur.
I've done upgrades like this many, many times before and have never had my system react this way. You clearly have a bug in your update process and should fix it pronto. Do you know how confusing it is to get a dialog like this? Should I let it register me for a product I don't own? Is that going to somehow trash my legitimate license (now there's the process of activation, I'm always concerned that I'll mess things up and end up unable to use Photoshop until support can help me out)
I'll go find my serial number and re-enter it, but I think this is a serious bug - and will make me much more cautious about waiting to apply updates until I've read the forums to make sure it's safe to do so

How to replace the update staement with a modify statement

how to convert this update stat to a modify stat?
Message was edited by:
Ashwin A

Hi
MODIFY <DB TABLE> FROM <INTERNAL TABLE>
To insert or change a single line in a database table, use the following:
MODIFY <target> FROM <wa> .
The contents of the work area <wa> are written to the database table <dbtab>. The work area <wa> must be a data object with at least the same length and alignment as the line structure of the database table. The data is placed in the database table according to the line structure of the table, and regardless of the structure of the work area. It is a good idea to define the work area with reference to the structure of the database table.
If the database table does not already contain a line with the same primary key as specified in the work area, a new line is inserted. If the database table does already contain a line with the same primary key as specified in the work area, the existing line is overwritten. SY-SUBRC is always set to 0.
A shortened form of the above statement is:
MODIFY <dbtab>.
In this case, the contents of the table work area <dbtab> are inserted into the database table with the same name. You must declare this table work area using the TABLES statement. In this case, it is not possible to specify the name of the database table dynamically. Table work areas with the same name as the database table (necessary before Release 4.0) should no longer be used for the sake of clarity.
Reward points if useful
Regards
Anji

Why each time I try to save my day's work,version WITH mark-ups and version w/o, does it say "you have placed a large amount of text on clipboard do you want to access this? What is clipboard and how can I just save my work in its proper file?

I don't get this clipboard thing! I have created two files, one for the MS with mark-ups, and one for the unmarred version, each living in their own spot in my "house." It seems to be merging the two versions and I have to go in and re-paste and then it always says "you have placed a large amount of text on clipboard do you want to be able to access this?" and it prompts me to say no but I am afraid I'll lose my day's work so I just tap cancel. I highlight the day's revision and select "copy" to paste into the unmarked doc. before I save on the marked up or working doc. It is when I try to close that one that the clipboard issue pops up. What can you tell be about saving doc. in two places and how to NOT get it on clipboard? Thanks! I am not super computer savvy so layperson's language much appreciated!

Are you using Microsoft word? Microsoft thinks the users are idiots. They put up a lot of pointless messages that annoy & worry users. I have seen this message from Microsoft word. It's annoying.
As BDaqua points out...
When you copy information via edit > copy, command + c, edit > cut, or command +x, you place the information on the clipboard. When you paste information, edit > paste or command + v, you copy information from the clipboard to your data file.
If you edit > cut or command + x and you do not paste the information and you quite Word, you could be loosing information. Microsoft is very worried about this. When you quite Word, Microsoft checks if there is information on the clipboard & if so, Microsoft puts out this message.
You should be saving your work more than once a day. I'd save every 5 minutes. command + s does a save.
Robert

HT1926 Have new generation 6 nano. Was able to install version 8 of itunes but error reads that this version with Vista needs newer version. Have tried to install 10.1 but it installs only part way then installs itself part way through. Help.

Has anyone had problems downloading itunes 10.1 with the generation 6 nano? I have
Windows Vista on my computer. Was able to install version 8.1 but nano needs newest version. Help anyone???

The solution Lijoesat posted above worked for me!
First I found the private/var/folders/ (and then lots of gibberish folders) and singled out two garageband files and deleted them. This did not work.
I then deleted everything which may or may not be a good thing, I am an idiot, I have no idea if these are extremely important files or not!
I tried to empty the trash bin after but many files was locked and Garageband would still not install.
I did a restart of the computer, emptied the bin successfully and tried to install Garageband again and it worked fine!
The inserted picture show some of the folder structure, I deleted everything after private/var/folders/

Using SyncDoc to sync Accounts full version with the Accounts Lite Version

Hello,
I tried the AccountsLite application version for a few weeks and I just purchased the full Accounts version. My phone is telling me I can sync the applications using SyncDocs. My interpretation of this is that I can tranfser the information I have input into the lite version into the full version. Is this the case? If so, what is SyncDocs and how do I sync these two together?
Thanks,

If you want an unlocked version, you need to buy it from Apple and pay full price. AT&T can only sell you an iPhone locked to their network.
The nano Sim card of the 5S will work well on the iPhone 6 Plus.

Issues when installing Windows XP on a PXI-8108 with a Solid State HDD

Hi,
I have been assisting a client with installing Windows XP onto a PXI-8108 controller. They have replaced the default HDD with a solid-state HD.
We have attempted to run the System Recovery CD. The recovery part works fine, ie. you select Acronis, it unzips all the files to C drive.
However when it gets up to the bit where Win XP Setup starts (after rebooting once the Recovery section completes), we have issues.
It can't find files, ie. dmconfig.dll, gm.dls, etc on the Win XP CD. When it tries to find mfc40u.dll, it came up with an error:
"The file Setup placed on your hard drive is not a valid Win XP System image. If you are installing from a CD, there may be a problem with the Windows XP CD."
We have tried two different recovery CDs, and we even tried just a plain Win XP CD. All had similar issues.
We have tried different SATA settings in the BIOS - both IDE AND AHCI.
It may just be that we have a faulty SSD, however it seemed to work ok when we had it connected to the PXI via USB (with the default HDD still in place). I was able to run diskcheck, which did not bring up any errors. Disk Management showed things were healthy.
So what I would like to know, is if there is any issue with a PXI-8108, and SSDs? We have successfully performed this operation a few months back using the same brand of SDD, but with a PXI-8104.
Any suggestions would be much appreciated!
Christopher Farmer
Certified LabVIEW Architect
Certified TestStand Developer
http://wiredinsoftware.com.au

This is more than likely a failing disk. SSDs don't always report failures in the same way as a rotating drive. Also, the tools that are helpful with diagnosing rotating drive failures don't always work with SSDs.
From the thread, it sounds like you have another system with this same SSD and it is working properly. Does that system have the same PXI Controller and Chassis?
I have seen these types of errors if the media for the OS installation is corrupt, but it sounds like you have tried different CDs.
I realize you have limited access to this drive, but here are my recommendations:
1) Put the failing SSD in a different system (desktop is preferable), and install a base version of XP. If this fails, RMA the drive, they normally have 3-5 warranties.
2) Run Crystal Mark Info and check for SMART failures:
http://crystalmark.info/software/CrystalDiskInfo/index-e.html
3) You can securely erase the SSD, which is not for the faint of heart. This will restore the drive to a new condition. If the drive has a bad cell which is causing data corruption during the OS install, securely erasing the drive will hopefully cause the firmware to map out the bad areas. This is a good tutorial, just ignore that fact that it is targeted at Intel drives.
http://www.iishacks.com/2009/06/30/how-to-secure-erase-reset-an-intel-solid-state-drive-ssd/
I hope this helps out,
Regards,
Andrew Mierau
Project Engineer - Servers & RAID Storage
National Instruments

Planning with diff. Production versions

Dear all,
i am using make to order strategy and scenari is that there are three versions of a fert. when sale order is generated and i run MRP how can i have three plan orders with 60:30:10 ratio. i mean if sale order is of 100 units then i want to plan 60 units by version A ,30 units by version B and 10 units

Shoaib ,
It will not work with sales order, but it work fine with MTS.
with sales order it will take whole quantity of all the orders and divide it into the quota.
check my reply in the below thread and the findings of the Jawad.
Re: Quota Arrangement in Make to order Environment
Hope it will help you.
regards
Ritesh

Hello I am coming to the united stats next month and i have a broken iphone 4 What are my options ? And could i replace it with the new iphone 5 or other apple products ? And how much will it cost me . Thank you for you're time.

Hello
I am coming to the united stats next month and i have a broken iphone 4
What are my options ?
And could i replace it with the new iphone 5 or other apple products ?
And how much will it cost me .
Thank you for you're time.
<Edited by Host>

If that iPhone was orignally sold in the US, Out of Warranty replacement cost
will be
Phone 4, iPhone 3GS,
iPhone 3G, Original iPhone
$149
Replacement will be an iPhone of the same color and GB. There is no option to upgrade
using Out of Warranty replacement.

Ever since Firefox 3, I have never been able to upgrade easily. I always get a message telling me I am replacing my version with an older version. How is that possible?

When I download the newest version (this time it was 5, but I had the same problem with 4) and I drag the Firefox Logo to my Applications folder in Mac OSX (10.6.7) I get a message saying I am replacing my version with an OLDER VERSION. How can this be? When I check the Firefox "About" tab, it tells me I am still using 4, so how, if I just dragged 5 to my Applications folder, can I be replacing 4 with an "older" version? Truth be told, my Firefox has never functioned properly since 4, and now I have little "Firefox hard drive icons" all over my desktop. What happened?
I am having trouble with Comcast's XFINITY and they told me to update and maximize my browser. I don't seem to be able to do that. I just downloaded Firefox 5.0, but my version still says 4.1.

When I download the newest version (this time it was 5, but I had the same problem with 4) and I drag the Firefox Logo to my Applications folder in Mac OSX (10.6.7) I get a message saying I am replacing my version with an OLDER VERSION. How can this be? When I check the Firefox "About" tab, it tells me I am still using 4, so how, if I just dragged 5 to my Applications folder, can I be replacing 4 with an "older" version? Truth be told, my Firefox has never functioned properly since 4, and now I have little "Firefox hard drive icons" all over my desktop. What happened?
I am having trouble with Comcast's XFINITY and they told me to update and maximize my browser. I don't seem to be able to do that. I just downloaded Firefox 5.0, but my version still says 4.1.

I have a problem with mail autofilling info email addresses. Emails sent to me the from looks like this: Holiday in the United States email address . I have no idea what this Holiday in the United States is...How can I fix/change to my name?

I have an irritating problem with mail autofilling info in email addresses. Emails sent to me the from looks like this: Holiday in the United States <my email address>. I have no idea what this Holiday in the United States is or how it got to be there...How can I fix/change to my name?
I fixed the To: autofilling incorrectly by deleting my email address from the Previous Recipients List, but is there a way to stop that from coming up on emails that I receive?

Have you checked your Mac address book? If your email is saved somewhere in your address book with the name "Holidays in the United States" it might be adding the name automatically in Mac Mail.
Alternatively, try this:
Delete an Email Address from Auto-Complete in Mac OS X Mail
To remove an email address from the auto-complete list in Mac OS X Mail:
Start typing the recipient's address or name in a new message.
Select the desired address from the auto-complete list as if you'd compose an email to them.
Click the small down arrow in the recipient.
Select Remove from Previous Recipients List from the menu.
You can also search for the unwanted address directly in the previous recipients list:
Select Window | Previous Recipients from the menu in Mac OS X Mail.
Highlight the address you want to remove.You can highlight multiple addresses by holding down the Command key.
Click Remove from List.
Source: About.com

Replacing a german version with a united states version

Similar Messages

Maybe you are looking for