Replacing a Hard drive and upgrading to windows 7
Hi all, I own a Lenovo N200 0769-BLG laptop with 3gb of ram and a 110gb hard drive running on XP 1.66ghz dual cpu t2330.
I am thinking of replacing the Hard drive with a 320gb Western digital Sata, rpm 5400 to increase the storage on my laptop. Im also thinking of upgrading the OS to windows 7 from XP and Im wondering what would be the best way of doing this, can I do it at the same time for instance.
Your help is greatly appreciated
The_springbok
you need to get the larger hdd first, the largest you can get is about 500 gig in 9.5 mm and 2.5 inch form factor, you can get this online through places like newegg.com, then you would need to purchase a copy of the Win 7 home from somewhere.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft
Similar Messages
-
We recently installed Window 8.1 and now our new music does not sync to our i-pod nano. Any ideas?
We have tried both a generation 5 Nano and new Nano.Hey Terrible Teddy,
Thanks for the question. I understand you are experiencing issues with the iTunes library on your PC. To begin, I see that you recently installed a new hard drive. Did you happen to copy over files from the previous hard drive? If not, I suspect that the iTunes library is no longer locally stored, and what you are seeing is your iTunes in the Cloud purchases.
Do the tracks have a download icon that looks like this?:
If so, you’ll want to download these purchases as they are not locally stored on your computer:
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
After doing so, go ahead and attempt to sync your iPod once more.
Additional Information:
iTunes 11 for Windows: Symbols used in iTunes
http://support.apple.com/kb/PH12306
iTunes 11 for Windows: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12491
Thanks,
Matt M. -
Hp replaced my hard drive and i cannot download quick books. i have windows 7 64 bit notebook.
hp replaced my hard drive and i cannot download quick books. i have windows 7 64 bit notebook.
Try a clean install, as described in http://forums.adobe.com/thread/928315
If you still have troubles after this, and if you're using Internet Explorer, check out http://forums.adobe.com/thread/885448 and http://forums.adobe.com/thread/867968 -
I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????
Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X. -
I replaced my hard drive and reloaded itunes. Now it won't open and I get a message that the file itunes library.itl cannot be read because it was created by a newer version of itunes. What do I do?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
EDIT: My apologies ... it'd be better to start straight in with the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
I just replaced my hard drive and restored everything from Time machine. However, my itunes is empty. No music, movies etc are there. Please help thanks
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Windows images, but you get the point. Depending on the age of your library the library file might not include the .itl extention. Make it match the file you are replacing.
See MusicFolder Files Not Added and Super Remove Dead Tracks for tools to catch up with any changes since the backup file was created.
tt2 -
I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?
Where do I find this library?
thanks
ShakTwas quite a hassle if I am honest which was eventually resolved but I don't feel qualified to help anyone through the process as it required a trip to my local apple store and a genius bar appointment.
Personally, I would do anything like moving pictures out of folders etc. Certainly not creating a new users. i don't think that is an elegant solution
Try the following which MAY just about rescue the situation for you but if they don't work you may have to do something more drastic.
(1) Holding down Cmd & Alt at the same time, start iPhoto by clicking on the iPhoto icon. From the resulting menu choose Rebuild photo library by selecting all available options given to you and then pressing REBUILD!
If that doesn't work
(2) Fire up Utilities. Go to migration assistant. Chose 'From another Time machine back-up'. Open the 'Users' option that comes up next and from there select Pictures, then uncheck everything else like Applications etc (you don't want to do a full migration of everything) and click go.
If that doesn't work, take a deep breath and this step is rather complicated but it worked for me. First of all close iPhoto! Then go to new Finder window.
From the Finder window choose Pictures, then iPhoto library, press CMD and the letter i. It brings up a new window. Go to Sharing & permissions. From there select the padlock to unlock settings. and then select User account, then press the 'cog' icon next to +/- abd choose Apply to enclosed items.
This may take a while. Once completed, re-open iPhoto.
And that should (I stress should) cure it.
Good luck. -
I replaced my hard drive and lost iPhoto. Is there a way to retrieve? I can not find the starter discs that came with my Macbook Pro.
Customer Service: Contacting Apple for support and service - this includes international calling numbers. You can purchase replacement discs from Apple.
Or, you can upgrade to Lion or Mountain Lion:
Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
A. Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.
B. Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
Replaced my hard drive and can't get snow leopard back...
I replaced my hard drive and reinstalled the operating system using my "Leopard" install CD. But I had purchased "Snow Leopard" and now have no idea how to get "Snow Leopard" back. Itunes won't work for some reason...everything else is fine. I do have my time machine...but I had so much junk on their I don't want to just restore it... I want a fresh computer with what I had purchased..."Snow Leopard"...so that I can maybe upgrade to Mountain Lion.
Can someone help?You need to reload it from the DVD you used to install it. If you've lost that, the online Apple Store sells them.
(72872) -
I recently had to replace my hard drive and lost my iTunes library. When I try to transfer the content from my iPod to iTunes on the new hard drive (same computer), it would only let me transfer iTunes store purchases. How can I complete the transfer of all the content on the iPod back onto the computer?
Recover media from iPod
See this post for options on moving your iPod data back to your computer.
tt2 -
I had to replace my hard drive and need to get my bookmarks from my sync account, but I don't have access to my sync code. How do I get it or can you send it to me again. It was in my email on my bad hard drive. Thanks.
Intertech Design wrote:
Where do I get the specially assigned serial number????? I don't want to have to purchase anything since I already bought the CS2 and I don't need a newer version.
Follow the prompts at the link provided by Ned.
Everything's there including your new CS2 non-activation download file and your new non-activation serial number.
It's free for existing owners of CS and CS2. Nothing more to purchase. -
My HP computer's hard drive crashed. I have replaced the hard drive and reinstalled all of the software. I have copied my I tunes library from my backup hard drive to the new one. How do I restore the permissions? This is the 3 rd time I have had to do this. THe share screen says you are limited to 5 ??
No backup is not good.
You can transfer itunes purchases from an ipod. File>Transfer Purchases -
IPhoto events and pictures missing from iPhoto after restoring new hard drive and upgrade to iLife11
My iPhoto events and pictures are ALL missing from my iPhoto Library after I tried restoring my programs on a new hard drive AND upgrading to iLife11! Over the last few months, I upgraded my 2008 Macbook Pro's hard drive from a 250 GB to a 500 GB hard drive and since then have been manually installing and restoring programs and software. I decided to do things manually because I had problems with doing Time Machine backups/restores in the past, so before I upgraded the drive, I manually saved everything to a Western Digital MyStudio 1 TB hard drive that I had just for the purposes of a second back up. Anyway, I tried importing the pictures onto the new library, but couldn't find the hard copies at first, so that didn't work. I then tried deleting the iPhoto Library that came with new operating system, then copying my old backup onto the new hard drive...that didn't work either. However, when I right clicked on the iPhoto Library icon on my external hard drive (the original) and clicked on "show package contents," the folder not only contained the originals, but they were still organized by year and event just as I had them originally!
So, then I thought "why don't I try just importing the pictures directly into the new iPhoto Library!"
I tested it out, and sure enough, it worked! I then tried importing an entire folder (which, was actually the name of the event), and again it worked! So, I literally clicked and dragged my entire 2007-2009 library of pictures (which was about 35 GB) back into my iPhoto Library! AND, this only took about 30 minutes to download, enough time for me to write this post and the following instructions to Recap:
1. Open your new iPhoto Library
2. Go to wherever your ORIGINAL iPhoto Library is saved/backed up, then Right-click (or Control click) on the iPhoto icon
3. Click on "Show Package Contents"
4. Go to the folder called "Originals" or "Master"
5. Click and drag everything INSIDE the folder (not the folder itself) to your new iPhoto Library
6. DO NOT try Importing from inside iPhoto! For some reaseon, iPhoto can't see these images, but I promise, they're there!
I assume this could work on other iLife programs, but luckily I have MobileMe and my iCalendar updated itself, though I did have to do some tweeking...
Hope this helps other people out, GOOD LUCK!I'm re-posting the answer to this problem so I can show it has been answered:
Open your new iPhoto Library
Go to wherever your ORIGINAL iPhoto Library is saved/backed up, then Right-click (or Control click) on the iPhoto icon
Click on "Show Package Contents"
Go to the folder called "Originals" or "Master"
Click and drag everything INSIDE the folder (not the folder itself) to your new iPhoto Library
DO NOT try Importing from inside iPhoto! For some reason, iPhoto can't see these images, but I promise, they're there!
GOOD LUCK!!! -
Re: My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?
If you are trying to recover photo stream photos, they are only held in iCloud for 30 days. All you would be able ro recover is photo stream photos from the last 30 days.
If you have an iOS device that still has the photo stream photos one it, you can save them to the camera roll by opening the my photo stream album, tapping Edit, tap the photos, tap Share, tap Save to Camera Roll. Once in the camera roll, they can be imported to iPhoto on your Mac as explained here: http://support.apple.com/kb/HT4083. -
My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?
While we all have MacBooks in this forum most of us don’t use iCloud. There's an iCloud Support Community where everybody uses iCloud. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/icloud/icloud_on_my_mac
Maybe you are looking for
-
Why does apple release seri in beta with many problems
why does apple release seri in beta with many problems
-
Multiple Joins - or Joins in General -- Impossible in Discoverer????
I would like to do multiple joins in Discoverer and/or custom sql.... How do I do this? Currently I can only do joins on Aggregated/Calculated Items
-
I have downloaded ACR6.7 but do not know how to get it into CSR5/Bridge. Any help would be appreciated.
-
I had to change my gmail account password on line. I can access my account with the new password through my browser and my cell phone. But when I try to sign in to my gmail account in Thunderbird using the new password I get a "Configuration could no
-
NM-16ESW - adding a switch into a 3725 router slot - can i route traffic out of the switch ?
Hi all, I have added the above module (16 switch port) into my router. R16#show ip int br Interface IP-Address OK? Method Status Protocol FastEthernet0/0 unassigned YES unset administratively down down FastEthernet0/1 unassigned YES unset administrat