Replacing a hdd and installing Windows 7.... Help, please!!

I am not very technologically-minded.
I have a Toshiba Equium L40 laptop running Vista with a 120Gb hdd.
I thought it might be a good idea to upgrade the hdd and install Windows 7.
Am I right in thinking that the easiest way to do this would be to install the new hdd first [320Gb].
Then install the Toshiba Recovery disc [to install the appropriate drivers].
Then install Windows 7.
Is this the easiest/best way, guys?

Hi Clive..
Thanks for your advice. 
Just to clarify, to follow your advice, would I download the device drivers first? 
If so, from where? And which device drivers?
I would like to install the larger hdd (320Gb). I have already bought one - and I need it for all the media material I have now accumulated.
Would you suggest, therefore, simply installing the new hdd. And then installing Windows 7 (clean install). And then the device drivers?
I was originally thinking of installing the new hdd followed by an installation of the Vista recovery disc - since this would install enough device drivers and necessary Toshiba programmes to enable me to update device drivers thereafter.
I have never done this before. So if my proposed sequence of actions sounds 'bobbins', please excuse me!
[The man in the shop said installing a new hdd and then installing Windows 7 was easy if you knew what you were doing - but not at all easy if you didn't.]

Similar Messages

  • Replacing the HDD and installing leopard (PLEASE HELP)!!!

    hi there,
    i currently have a macbook that has just gone out of warranty. i bought a new HDD from WD, installed tiger (using the original discs that come with the mac) and then installed leopard. it seemed to be working fine (apart from a few keyboard buttons playing up), until less than 2 weeks of doing this, the hard drive crashed out on me. i was absolutely gutted! mainly due to the fact a lot of the files i copied over and new ones had gone. i put in the original HDD (which i left as it was) and it worked as normal. i have now received a new HDD from WD and am about to install it along with 2 x 1GB RAM sticks.
    i have no problems installing the HDD again or the RAM. the only concerns are, when selecting the new HDD when previously installing it, i lost out on about 30GB of memory (10GB after formatting, 15GB after installing tiger & 5GB after installing leopard). that's about a quarter of my HDD gone. i would have installed leopard clean but i wanted ilife '06 that came with tiger.
    is there a way to install leopard clean and then install just ilife '06 by itself from the installation discs, so i can save some space on the new HDD?
    if anyone can help i would be so grateful, thanks, ravi.

    Install Leopard by itself. Do not install Tiger. When you do your Leopard install watch the lower left corner of the install screen and when you see custom click it. That way you can choose not to include all the printer drivers and language files. That will knock off a few gig.
    Once Leopard is running insert your 1st install disk. Once it opens choose the install bundled software choice. Once it is open you can do a custom install and put just what you want back on your MacBook. That way you don't get all the extras.

  • Ideapad S10-3. can't install windows XP, help please!

    1st problem: keyboard is working fine at boot menu. but on the part where i will enter my password on windows xp, keyboard is not functioning anymore. touchpad also stops functioning after i press a key, but initially touchpad is just fine, help please! i cant use my notebook, thanks!

    Hi
    Welcome To Lenovo Community
    We are really sorry to hear about the issue you are facing,  
    Based from what i read in your post, keyboard is not functioning when logging to windows  & touchpad also is not working  . Please try entering in Bios , and check if you are able to use the keyboard , Load setup defaults , Keep tapping F8 to load windows in safe mode and check .
    If you are able to use the keyboard & touchpad  , Try disabling startup by using MSCONFIG
    Then restart and check .
    You may also try using UBUNTU Live CD to verify if the keyboard and touchpad are working
     https://help.ubuntu.com/community/LiveCD
    http://www.ubuntu.com/download/desktop
    Do give this a try and let us know  
    Hope This Helps
    Cheers!!!
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español

  • Replaced zd8000 motherboard and need some troubleshooting help please............

    Hello All,
     I just replaced the motherboard on our HP zd8000 (pentium 4, 3.0ghz, 2gb ram, Win XP) with a used but tested good MB and need some help with the following.
    1) I now cannot play DVD movies as the error no "dvd decoder" present which was not an issue before?  Where can I go to get a free decoder that will work, as Windows only shows paid versions?  We have the dvd burner/reader with lightscribe. SOLVED! CNET HAD DECODER.
    2) The internal temperature, according to SpeedFan, is running around 140 degrees with just some Internet browsing.  Is that a normal temperature because I only have one of three fans running on the laptop?  Is there anyway of making all three fans run to be sure there are no issues?  I am positive I hooked up everything but again only one fan seems to be running?
    3) I discovered some of the pins were damaged in the card reader.  I may get the Seller to give me a discount, no intention of tearing it apart simply for that, but is there any concern of short or otherwise?
    4) Our battery stopped charging years ago, these were notorious for such, but I purchased a new one last year and hoped the replacement MB would allow charging again.  No such luck though.  Is there anything I can do, BIOS update etc, to make the battery charge?
    5) Anything you folks can think of for me to test to insure the new motherboard is working properly?
    Thanks, Ralph 
    P.S. This was a correct replacement board according to MB serial numbers.  Everything else seems to be functioning properly other than mentioned.  Our graphics went out on the original MB.
    This question was solved.
    View Solution.

    Some of the wires had pushed out of the harness that connected the other two fans.  I double checked and re-attached those so now the laptop is running quite a bit cooler.
    EVERYTHING IS GOOD TO GO!

  • Hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

    hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad/ TOUCHPAD is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

    Did you download and install the Windows Support software? If you did, did you use the Boot Camp Control icon to set up the trackpad how you want it?
    http://www.apple.com/support/bootcamp/
    https://discussions.apple.com/community/windows_software/boot_camp

  • HT3986 In using bootcamp to partition and install Windows on my computer, the partition step stops and sends me a message that "files cannot be moved" so partitioning is incomplete.  I am stuck. Please help.

    In using bootcamp to partition and install Windows on my computer, I keep hitting a snag.  Message says that partitioning can not be completed because files can not be moved.  I have tried several things but nothing seems to be helping to move the process along.  What should I do?

    Welcome to the Apple Support Communities
    In most of the cases, that message appears when there's a problem with the filesystem, so you have to repair the disk. This doesn't mean that the hard drive is damaged.
    First of all, open  > About this Mac, and check Version. If it's 10.5 or 10.6, insert the Mac OS X DVD of the version you are using and press C key while your Mac is starting. If it's 10.7 or 10.8, press Command and R keys while your Mac is starting. After doing this:
    1. Go to Utilities menu > Disk Utility (if you have 10.5 or 10.6) or open Disk Utility (10.7 and 10.8).
    2. Choose Macintosh HD in the sidebar and repair the disk.
    3. Restart, open Boot Camp Assistant and follow the steps to install Windows on the Mac

  • Disabling Fusion Drive and Installing Windows on SSD of Late 2012 iMac

    Hi, everyone.  After a two-year wait, I'm ready to buy my first iMac (was waiting for USB 3.0).  Before I get into my questions, I'll give you an overview of where I'm coming from so we can keep the discussion focused.
    My Usage
    I'm buying an Apple computer because it is the best-looking, quietist, and most powerful all-in-one computer I can find right now, but Windows is still my preferred operating system.  I've used OS X before – it looks great and I'm sure it works great for a large number of people, but it's not for me.  Windows works well and efficiently for me and I have thousands of dollars of design software for Windows.  I'm not interested in a virtualization solution because of my performance needs.  However, I do want to keep the OS X installation, if possible, for website testing and to play around with to learn the operating system better.
    What I Want
    I was attempting to buy the Late 2012 iMac last weekend, but it appears the BootCamp specifications and the Fusion Drive are currently limiting my usage needs.  I'm configuring the top model iMac with the i7-3770 processor, 24GB RAM (8 default + 16 from Crucial), GTX 680MX, and the 3TB Fusion Drive.  I don't actually want to use the Fusion Drive, though.  I want Windows 7 64-bit and OS X 10.8 installed on the 128GB SSD and to use the 3TB hard drive as storage for my music, videos, photos, and documents.
    My Questions
    1.  I've found a bunch of posts regarding installing Windows on the Fusion Drive, but they all seem to be about putting Windows on the slower 3TB hard drive portion and/or about trying to keep the Fusion setup after installing Windows.  Does anyone have a walk-through for a new Mac user on how to break the Fusion Drive configuration and install Windows 7 and preferably OS X on just the SSD?
    2.  I've seen a bunch of posts debating about whether Windows can be installed natively using EFI to bypass the BootCamp limitations.  Is this possible?  The 21.5" version is running EFI version 2.0, so I can only assume the 27" would too, but it's not been added on the Apple website yet (http://support.apple.com/kb/HT1237).  From what I understand, Windows requires at least version 2.0 to run in EFI mode.  Also, if I am able to get this method to work, will I still be able to install the Windows drivers from the OS X installation USB (or do they even come with USB drives anymore?)?
    3.  If I have to use BootCamp, I assume I will have to split the 3TB drive into 1TB and 2TB partitions for BootCamp to see it (so Windows can see it).  So I'd have Windows 7 and OS X on the SSD, and two storage partitions on the 3TB HDD that would show up as two drives for my files that both operating systems could access.  Is this assumption correct?
    4.  I've seen posts about OS X automatically trying to rebuild the Fusion Drive.  Let's say I'm able to get Windows installed on the SSD.  Will OS X, or future updates to it, ruin my Windows installation?  I would hate to do all this work and then have an Apple update corrupt everything.
    I know this is a long post, but I don't want to spend over $3,000 until I can be sure I can make it work for me.  Thanks to anyone who can help!
    iMac, Windows 7

    First, an advice: Boot Camp isn't compatible with 3 TB hard disks and Fusion Drive. For 3 TB hard disks, there's a workaround, but it doesn't work on a 3 TB Fusion Drive, so you won't be able to install Windows until Apple fixes this, so my advice is to wait until Apple launches OS X 10.8.3 or buy the iMac with a 1 or 2 TB hard disk and an external disk.
    1. The SSD is used automatically by OS X to store the applications and data you most use, but Windows can't use it, and there's no workaround for this.
    2. You can try to install Windows 8 in EFI mode, but I don't guarantee that it works. I tried it on my iMac and I started getting BSODs after some startups. Also, Macs don't use UEFI 2.0 (Macs use EFI 1.x), so you can't use Windows 8 advanced features such as Secure Boot. For Windows 7, you can't install it in EFI mode (it requires UEFI 2.0 or later)
    3. Fusion Drive only allows you to have two volumes, and with Boot Camp, you can only have two volumes on your computer: one for OS X and the other one for Windows. That's because Boot Camp emulates a BIOS to make Windows run (although it isn't neccesary in Windows 8, if Apple would want).
    4. First, you can't install Windows on the SSD. Then, OS X shouldn't ruin Windows because each operating system have got its space

  • How can I unistall Vista from Satellite L300-11Q and install Windows XP

    Hello!
    Help please: How can I unistall Windows Vista from my notebook and install Windows XP?
    Should I do something with discs and BIOS before it, or I can just format disc C and then install XP from CD-disc?
    How can I make a recovery disc before uninstalling Vista?
    Thank you very much!

    Greetings,
    I had such a hard time finding exact information on downgrading Vista to XP recently, I'm posting this on several different threads in hopes I can save others some time and effort; sorry for cross-posting.
    When installing XP over Vista, instead of worrying over getting Intel Matrix Storage, streamlining a CD with it and SPII, blah, blah, blah, why not just go into BIOS at startup and switch the SATA setting under Advanced Disk Management from (whatever the default is) to "Compliant"? This allows the XP install to see the drive as an IDE, (actually ATA), and POOF! Your problems are solved with a LOT less hassle. (The XP install disk DOES have to have Service Pack II on it.)
    I just did this over the past weekend, and it worked great. (Actually I didn't have much of a choice, as the processor on my Toshiba is an AMD, not Intel, so all the downloading and configuring CD's with matrx storage in the world wouldn't have done me a bit of good; the AMD processor "chipset" is contained within the graphics driver setup.)
    Save yourselves a lot of time and headaches and forget the whole matrix storage thing. As far as I can tell it would also work with an Intel processor, but since you can "turn SATA off", IMHO it's a huge waste of time mucking around with the matrix storage. If you want full SATA configuration after all's said and done, you can always go back in and turn the BIOS switch back to SATA after you have XP up and running and have just used the executable to install the matrix drivers.
    Cheers,
    Kutsavi

  • Can I use bootcamp and install Windows 7 on an external Thunderbolt drive

    Hello,
    I want to know if it is possible to install windows 7 on a thunderbolt external hard. I have a limited space on my harddrive and want to have windows 7 operate and store data on the thunderbolt drive.
    Anyone know if this works or if its possible.
    Thanks

    i use a thunderbolt ssd for my boot disc and it appears that bootcamp appears to start ok. in disk utility i can partition the drive successfully so i would be really interested if this would work. personally i cant see any problems.
    are you thinking about formating the drive and installing windows without bootcamp? that will definately not work!
    however with bootcamp you stand a very good chance of achieving your wish. please keep us posted if you decide to do this.
    i know of one way that can absolutely do it, but it means installing osx on your ext. first. i have vmware on my ext. running win 8.1 works seamlessly.
    i run bootcamp from my internal hdd with win 7.

  • How can I partition internal HDD after installing Windows 7 Professional via Boot Camp 4.0?

    I recently purchased MacBook Pro 13" (Late 2011) model with OS X v10.7.2 Lion installed. I've upgraded to OS X v10.7.3 Lion and updated all other software.
    I require Windows 7 for some Windows based softwares that do not support Mac OS X. Therefore, used Boot Camp 4.0 to install Windows 7 and then tried partitioning single internal HDD  to have 3 partitions (4 total including BOOTCAMP partition). Disk Utility created a 648.5MB partition and then I was able to create 3 other partitions of custom sizes. After applying these changes, I got an error message that said selected volume size is too small. I resized this 648.5MB partion to a custom size and had total 4 partitions, including BOOTCAMP.
    After reapplying these changes, BOOTCAMP partition was removed and I was left with only 3 partitions and empty space.
    I've tried several different ways to partition the disk, all in vein. Is there a way I can partition my single internal HDD after installing Windows 7 Professional via Boot Camp 4.0?

    You can't do what you want with GUI utilities, which will only allow a total of 4 partitions due to the limitation of MBR needed to support Windows. Those four partitions: EFI System (hidden), Mac OS, Recovery HD (hidden), Windows. So with Lion, you only get two visible partitions if you're going to use Windows with BootCamp. You can't make anymore with the included graphical tools.
    If you need more partitions you'll need to use something like GPT fdisk (gdisk) to create the partitions in the GPT first. Then add the Windows partition only to the MBR and flag it as bootable. gdisk can be googled and downloaded for Mac OS X off sourceforge. It is not a GUI tool.
    You should read this:
    http://www.rodsbooks.com/gdisk/
    And this:
    http://www.rodsbooks.com/gdisk/hybrid.html

  • I want to triple boot Have Snow Leopard and XP on separate drives and I want Windows 7 on another drive, can it be done by temporarily removing the xp drive and installing windows 7 on another internal drive?

    I want to triple boot my Mac Pro I have Snow Leopard and XP on separate drives (osx on drive 1, xp on drive 2) and I want Windows 7 on another drive (drive 4, drive 3 is used by osx for storage), can it be done by temporarily removing the xp drive and installing windows 7 on drive 4?
    I realise bootcamp only allows 2 operating systems and refit could change the size of my current xp drive to accomodate W7, that is not an option here for various reasons one being the drive is pretty much at capacity with only about 30gig free (I work with video so that free space fluctautes quite a bit). I have a brand new drive 4 with 1TB set aside ready for W7 but I'm unsure how to go ahead?
    any help or advice would be really appreciated, thanks

    Boot Camp is used to support Windows on the same drive.
    You can have a different OS on every drive.
    You could have Windows 7, Vista, and XP all on one drive if you so choose.
    I recommend not putting Windows and OS X on the same dirve when talking about Mac Pro - unless you just need something small and lite.
    Remove all your other drives while you install Windows 7.
    You could even relocate XP - if you need it even - or recover the hard drive space.
    You should always keep 30% free for Mac OS; same for data/media drives.
    Considering 1.5TB WD Black $110.... and you want OS X to be on a fast high performance drive as well.

  • Formatted USB and installed windows but cannot reformat drive

    Recently ive tried to install windows onto my laptop. I formatted USB and installed windows but cannot reformat drive the drive. I even tried to have bootcamp reformat the drive and it says it cant. I opened disk utility and it cannot do anything to it. I just want my flashdrive working again.

    Your USB flash Sandisk is correctly formatted as a FAT disk and called Wininstall when you used Bootcamp Assistant and checked the second check box to download BC drivers.
    If you are unable to see the FAT partition which will become NTFS for you Windows installation, that is a different issue.
    Have you looked at https://help.apple.com/bootcamp/mac/5.0/help/ ?

  • New Macbook Pro: Need to Partition Hard Drive & Install Windows 7 - help!

    My macbook crashed and I just got a new macbook pro (4GB). I run Fusion 3, but I need bootcamp for a program required for my law school exams. I have a full version of Vista and an upgrade for Windows 7 Home Premium.
    Should I install Vista first in Bootcamp and then upgrade to Windows 7 or just skip Vista and install Windows 7 using the upgrade disc only?
    If you could help or direct me to someplace that answers this question, I would greatly appreciate it! Thanks!

    Hi,
    I have not yet done this on my macbook pro, but I plan on doing it this way when I get an afternoon to myself. I would follow the link below. You can use the windows 7 upgrade disc to do a clean install. That way you don't have to worry about vista at all.
    http://www.winsupersite.com/win7/cleaninstall_upgrademedia.asp
    That link will explain the proper way to do it and it is completely legal and it will satisfy Microsoft's license requirements providing you own the upgrade disc and the Vista disc as you described.

  • I have had to replace the HDD and need to reinstall OSX.

    I have had to replace the HDD and need to reinstall OSX but cannot find disc that came with the unit, does anyone know where I can get them from or download if possible?
    James

    [email protected] wrote:
    Just how do you do an internet recovery on a system that has a blank HDD with no operating system that the unit cannot boot from????
    If your Mac came preinstalled with Lion or Mountain Lion after you install your new blank HDD, restart the Mac while pressing/holding the COMMAND+OPTION+R keys until you see a spinning globe. Make sure you have an Internet connection (WiFi or Ethernet). This will boot into Apple's Recovery HD servers and present you with the OS X Utilities Menu. From there you can select Disk Utility to format your new HDD and then reinstall Mac OS X for the OS that was preinstalled.
    Internet Recovery doesn't care if you have an unformated HDD because it boots over the Internet to Apple's servers, not your HDD.

  • I partitioned my MacBook Pro and installed Windows 8 in it.....now I can't find my partition when I pressed option key when booting up.....so how can I do to find the partition to boot...I can see it in the disk manager in Mac....any ideas? thanks..!..

    I partitioned my MacBook Pro and installed Windows 8 in it.....now I can't find my partition when I pressed option key when booting up.....so how can I do to find the partition to boot...I can see it in the disk manager in Mac....any ideas? thanks..!..

    Hi LamboMong,
    just try this:
    http://refit.sourceforge.net
    install, reboot twice and choose the Windows-Partition on next startup.
    (The apple-bootloader doesn't display all bootable harddisks.
    With rEFIt you can boot from all partitions/harddisks on your computer.)
    I hope that will solve your problem.
    Daniel Fernau

Maybe you are looking for