Replacing a picture turns the background black
I am working on a project and when i replace a picture in the project the preview screen turns black but the time line has the changed picture. When exported the background is black and not the picture.
please take a look at the discussion thread http://forums.adobe.com/message/4907967#4907967
if you still have any doubts, feel free to reply back
Similar Messages
-
Trying to turn the background black and white in lightroom 5. Using the adjustment brush. It isn't working.
Set Flow and Density of the brush to 100
Reduce it where you want the effect to blend.
Bruce -
Hello - I have Lightroom 5. I have imported a color photo. I am trying to use the Adjustment Brush to change the background to Black and White and leave a portion of the photo in color. When I begin painting the photo with the Saturation at -100 I don't see any changes to the photo. I push the "O" key and still nothing. I have tried to reset the photo, restarted Lightroom and still nothing. Please help.
Set Flow and Density of the brush to 100
Reduce it where you want the effect to blend.
Bruce -
Making the Background black in a Classic book
Last year I made a book on iPhoto 6 and I made the background of some pages black and others white.
I'm finishing a new book now and can't figure out how to change the background.
I'm sure it's quite simple, but I can't find the answer in the help menu.
The book type "theme" I'm using is "Picture Book". It's what I used last time and was able to make the background black (and the text automatically turned white)
In addition, I was able to place small pictures on the inside flap of the book cover, but I can't seem to do that anymore either. How do I do that?
Thanks in advance for your guidance.
dHi winks1123,
Im pretty new to the iPhoto thing but I use iPhoto 08 and for hardcover books the inside flap I am able to change the layout and choose different settings. There is one which allows you to put an image and some text.
I think that is what you mean. -
I am creating a video using the green screen option in iMovie. I imported a picture for the background of the project and videotaped someone using a green screen. Is it possible to move the video of the person around so it is not blocking the picture behind it?
To enable this right you need Acrobat, not the free Reader.
However, starting from Reader X it is possible to add simple markups to any file, unless it has been specifically disallowed by the creator of the file. -
How do I put a picture in the background on Pages
I must be having a senior moment! In the past I have made a poster in Pages and put a picture in the background and text over the top.
I have just tried to do it again and can't for the life of me remember how to do it. I do have a new version of Pages which has confused me slightly.
Any help would be much appreciated.
KathyMenu > Arrange > Section Master > Move object to Section Master
You also should still have Pages '09 still in your Applications/iWork folder
Pages 5.5.3 has over 100 + features missing and is comparatively buggy.
Peter -
My macbook pro randomly turns the screen black!
my macbook pro randomly turns the screen black when it's still on!
i tried to change the energy saver settings but it still happens.
i turn my computer off aprox. every 2 days i tried to bring a solution to this but its just weird
please help!
ps. this has been happening since i downloaded the first version of OS X LionMine does this too, have you had any luck with any solutions?
-
With green chroma concept, I removed the green background. Now the green background is seen black. I don't want to have any other background clip, but I would like to change the background black to white. Same like the advertisement clip in the Apple Website. Please help me.
If you want the whole of the project background to be white, you can change the colour in FCP X preferences.
If you just want white for a section or clip, use a custom Generator from the Generators Library and change it to white in the Inspector.
Andy -
How do I tile a picture in the background OFF the stage?
Okay, since my stage doesn't take up the whole window when viewing it on the Internet, is there a way to tile a picture in the background? So no matter how big someone's screen is, in the background they will see a tiled picture.
Sorry if that sounds confusing. I'm not very good at explaining myself...Hi! I tried adding to the HTML code
<body background="gradient-3-max.jpg">
but doesn't work... also tried
<body background="gradient-3-max.jpg" leftMargin=0 topMargin=0 marginheight="0" marginwidth="0">
doesn't work too.
Did I miss out anything? Any ideas?
Thks! -
my ipod touch 4g 8 gigs is not turning on it wont get past the apple logo its not frozen because it turns the screen black and the apple logo please help me
- Try a reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to your computer and try to restore.
- See if placing the iPod in recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- If the logo still show all the time, let the battery fully drain. After charging for an hour try the above again. -
I have worked out a simple way to put a single picture in the background on a two-page spread!
Please remember, if you have been working on your book, click on Create Saved Book to save your book BEFORE you do this. You can lose all your work up until the point where you create a saved book. After that, it appears on the left menu bar under Collections with whatever name you saved it under. Your book will most likely not appear when you click back on the Book module after leaving it. Don't panic - it hasn't disappeared. If you clicked Create Saved Book to begin with - it's there under Collections.
So here's the exciting bit (well the solution anyway):
Click on the picture you want to use as your two-page spread
STEP 1 - In the Library module
select your image (e.g. X.jpg) and right click on "Export..."
send a copy of this picture to "Same folder as original photo" (DON'T overwrite! remember to use a unique name, such as X_1.jpg)
then repeat to create another copy (use another unique name, such as X_2.jpg)
STEP 2 - In the Develop module, take X_1 and:
click on Crop Overlay (the dotted rectangle at the top of the right menu, just below the histogram)
select a region that is 50% of the width of your original image (easiest is to click on Custom and enter original height plus half original width)
click on the middle of crop region (hand grab icon) and drag the image all the way to the RIGHT
click again on the dotted rectangle
X_1 will now be an image that is just the LEFT half of your original image.
STEP 3 - In the Develop module, then take X_2 and:
click on Crop Overlay
select the same region that you used for step 2
click on the middle of crop region (hand grab icon) and drag the image all the way to the LEFT
click again on the dotted rectangle
X_2 will now be an image that is just the RIGHT half of your original image.
STEP 4 - In the Library module
select the folder your original photo was in
find your two new copies of that photo
drag them to your book situated in the Collections folder on the left menu bar
STEP 5 - Look under Collections and click on your book and then in the Book module
in the Background section (right side menu), UNcheck "Apply Background Globally"
to the right of the small rectangle below that, click on the tiny arrowhead and make sure "Photos" is selected
select the left page of your spread and drag X_1 (the left half) onto the rectangle
select the right page of your spread and drag X_1 (the right half) onto the rectangle
DONE!
Of course, you can now select any of the existing templates for your left and right pages. Remember, if you don't fill a particular template frame with a photo, it remains blank in the finished product (you can always check the preview in the top left corner in Spread View mode). For example you could pick a 4 x 4 template and only use the top three outer frames on the outer edge of both pages.
Have fun! I was so excited when I finally worked out this work-aroundI have an even simpler method. I use MyPublisher to print my books. I select their page layout for a two-page spread, drag and drop the image. DONE! I understand that most people have their favorite places to have work done. I have been extremely pleased with MyPublisher.com, so I haven't even tried the book module in Lightroom.
-
Put controls in the foreground, picture in the background
As part of a memory test programme, I need a distractor task, where people add up numbers appearing at random locations on the screen, then they decide whether the final number displayed is the sum or not. I need to take over the whole screen, without showing task bars or anything else except my indicators and controls.
My problem is that I don't know how to tell LabView what should be in the foreground and what in the background relative to the picture. Right now, the picture covers everything. In the attached VI, I made the picture transparent, so that I can see what happens behind it, but that still stops me from clicking on my Boolean controls. If I remove the picture entirely, everything works fine.
Thanks
Robert Biegler
Attachments:
Distractor task.vi 159 KBTwo replies - first, to get rid of the menu bars, go to File>>VI properties>>Window appearence, where you customize your window. Also check out Window size (the one riht after Window Appearence).
Second - by default, each new item you add is brought to the front. To control your picture, use the reorder button (that's the rightmost in the row of buttons on the menu bar - the one with the circling arrows). You can select the picture and move it to the back.
Try to take over the world! -
Macbook Pro...my screen goes black and it restarts itself. The message after it restarts says "restart due to problems" Any ideas what I should do or look for? It randomly happens and is becomeing more frequent.
kernel panic http://support.apple.com/kb/ts3742
-
I have a close up close-up image of an orchid with blurred background. I am trying to make the background black and white while maintaining the foreground color on the petals, buds and stems. Any ideas?
Use the Blank & White Brick and either brush the effect onto the background or brush is away from the foreground. "Detect Edges" will help control the edge of the mask.
You might be interested in knowing that you can brush on/away masks of different strengths, and thus produce effects in between 0% and 100%.
Search the forum -- there are several good posts detailing how to create this effect.
Sample search.
Message was edited by: Kirby Krieger -- added sample search. -
How can I made a background picture in the page?
HI
I made a news scene user km,but the news display page is very bald and ugly,How I can made a picture as the background or the banner of the page?
Message was edited by:
cui zhaoHi
Collection renderer settings
http://help.sap.com/saphelp_nw04/helpdata/en/87/3d48475ee8bd448c4031aa98d90524/frameset.htm
change the background color of KM Navigation iview
https://www.sdn.sap.com/irj/sdn/thread?messageID=1469984#1469984
pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3915a890-0201-0010-4981-ad7b18146f81
Regards
Ganesan S
Maybe you are looking for
-
How to disable fields in Table control???
Hi How to disable fields in Table control??? I want to disable particular row in table control when enter datas are correct.lets take as example ME41 or ME51 table control. Can anyone tell how to do disable in this table control Points will be reward
-
Retry failed task through OIM API
Hi everyone, I am trying to retry a failed task of particular resource. Can some one throw some light on how to do this? Thanks, Ani
-
I am so upset because i didn't research enough before upgrading to Lion. I can't use a lot of my pograms i used all the time now. I want to go back to where i was before Lion. Is there a way to do it without costing me more money?
-
Can anybody recommend an efficient application that will hard-code subtitle files onto video? I have tried two so far, both of which have serious problems. Aimersoft Video Converter allows you to set a font and a point size for subtitles, but ignores
-
Photoshop elements...the tools (Paintbrush and cloner) no longer show their adjustable size when working. Only a tiny cross shows...is there a way to reset tools ??