Replacing Airport Extreme Card in Late 2008 MBP - What to buy??

I've limped along for about 2 years now with my wifi constantly dropping while everyone else has a strong, constant signal. Doesn't matter where I am, it's always dropping and takes ages to reconnect. I've tried everything advised on the forum etc and am now about to buy something else as my main machine. I don't want to get rid of my MBP though so am planning on installing new memory and hard drive and while I'm doing that, want to replace the airport extreme card. The MBP will then become my secondary machine.
Problem is, I can't figure out what I need to buy to replace the **** card! Seems like a lot I'm finding are either for machines that never had cards or for 2009 or newer. I just need to know which card to buy.
OR . . . hearing that they are a pain to get to (keeping in mind I'll have the guts exposed while I upgrade the memory and HD) and fiddly . . . is there something external to plug into a USB I should get instead?
Here are my specs:
MacBook Pro, 15" Late 2008 (Unibody)
2.4 Ghz Intel Core Duo
2 GB 1067 Mhz DDR3 (which I'm about to upgrade)
Mac OS X Lion 10.7.4 (11E53)
Card Type:
AirPort Extreme  (0x14E4, 0x8D)
  Firmware Version:
Broadcom BCM43xx 1.0 (5.106.198.4.20)
  MAC Address:
  Locale:
  Country Code:
  Supported PHY Modes:
802.11 a/b/g/n
  Supported Channels:
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
  Wake On Wireless:
Supported
  AirDrop:
Supported

I'm already upgrading to 8GB of RAM and I'm planning on adding a Solid State Hard Drive since it will be a secondary machine. I really don't want to replace the optical drive too. At that point it's got new components in an old chassis with an old CPU.
I've been to the Genius Bar (back when I lived in a place where there was one in town) and they couldn't replicate the issue but as soon as I left it started up again. There are times when it holds the signal for a good hour or more or days like today when it's dropping it every few minutes. It's completely random.
No. This girl is going to go build her own PC with a fantastic GPU so as to kick some Diablo butt and the old Macbook Pro will only get used when I don't need it for anything serious. And I am most certainly not dropping another $2k + on a new MBP no matter how shiny they are! It's the end of an era as I've been using Macs exclusively for over 10 years now.

Similar Messages

  • What replacement Airport Extreme Card do I need for Macbook Pro 8.2?

    It looks like my Airport Extreme Card has failed, although the Blue Tooth  is fine. I'm assuming that I need to buy a replacement but am struggling to find what I need. I have a Macbook Pro 15" early 2011 i7 2.2ghz so just need to know what cards are compatable.
    It's been a slow failiure, over a couple of months but now it is not even recognised in the System profiler. I am happy to open the case and install a new card, I just need t know what will work. Is there a better card than the original out there, or even an upgrade? I've upgraded the Ram and had to change the HHD already, so as a machine it's starting to resemble the Philosopher's Axe...
    Any advice would be greatly appreciated!

    Hi Ralph,
    Thanks for the speedy response!
    I"ve had the case open when I changed the HHD and Ram, and can seen where the card slots in. It's held by a supporting arm which lifts up when disconected from the Logic Board. it's weird looking inside, as you can see there are many of the same componants I've seen in other laptops. It is a tidier build though. I'm confident that if I detach the 3 antener conectors and remove the retainer screws a new card will fit back in.
    The Genius Bars here in London are highly over subscribed, and I don't think I have the time or budget for that.
    I'll keep plugging away, and see what happens. I'm almost getting used to being tethered to the Ethernet cable. I've only tripped over it 20 times a day!
    Take it easy.

  • Replacing Airport Extreme Card

    Does anyone know where the airport card slot is on the 17" powerbook?
    On all other powerbooks and ibooks it is easily accessable, but i can't find
    it anywhere, or any information on where it is.
    I've got another aorport card to replace it with, but it just seems dumb to have
    to take it in and not do it myself.

    The 17 inch PowerBook G4 doesn't have an AirPort Extreme card; instead, the functions provided by this card are built into the computer itself. Therefore, there isn't a slot for the card you have, and the built-in module can't be replaced by you without voiding the warranty.
    (8905)

  • AirPort Extreme Card for "Late 2005" G5 needed

    Hello!
    I am trying to buy and install WiFi in an old G5 which identifies itself as
    PowerMac11,2
    Dual 2,0 GHz
    According to Mactracker that makes it a "Late 2005" G5, and this is where trouble begins for me…
    I searched for information on that; this is what I think is right at the moment:
    All G5s – except for this "Late 2005" Modell – work with AirportExtreme! Cards.
    This one needs an AirportExtreme!/Bluetooth card.
    This card cannot be purchased from Apple, costs loads of money and is hard to install.
    Could anyone help me confirm or invalidate anything of that?
    Maybe you even know what I can do to still get WiFi?
    All I would like is an affordable solution.
    Thank you very much for helping out a recent switcher who thought life would be easier on the other side
    greets,
    Ludwig

    Thank you for your encouraging answer, Silent One.
    Now, I don't want to rebuff you, but I think Apple wrote this for a reason:
    +"This AirPort Extreme Card is not compatible with the Mac Pro or the Power Mac G5 Dual and Power Mac G5 Quad computers introduced in October 2005. To add an AirPort Extreme card to one of these systems, please contact an Apple Retail Store or other Authorized Apple Service Provider. "+ (http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=85A 8FBC1&nplm=M8881LL/A)
    I am quite sure that I need to find a different solution.
    Thanks for your help, though, and please correct me if I'm just talking nonsense here,
    Ludwig

  • Where can I buy a replacement airport extreme card for my imac G5 17" 1.8GHZ?

    I just bought an imac 17" G5 1.8 GHZ. It is missing the airport extreme card and I am having a hard time at finding a place to buy one. Does anybody know of who sells one which will fit my computer?

    Here is a suggestion as an alternate to the airport extreme card. It is a tiny wireless 802.11n wireless adaptor you plug into a USB port.   Wireless N 150 Ultra Mini USB Adapter - $34.77   See
    http://stn2.headgap.com/resale/FMPro?-token=13365454&-db=ProductsC.fp3&-lay=WEB& -format=items.htm&-sortfield=SortID&-Max=40&category=pb&-find
    (scroll down the page)
    There are many other similar devices from other sellers.
    For the actual Airport Extreme Card, just do a Google search for sellers. I found one here, there are also others:
    http://www.airportcardsdirect.com/aiexca.html

  • Airport extreme card is not recognize.  what can I do?

    I install the airport extreme card about 3-4 months ago, and didn't have any trouble at all. I used to move the computer to many places and never had a problem.
    This Saturday, I took my PB to a friend’s house and when I turned it on, the icon didn't show at the top bar. I looked in the preferences and the airport connection option can't be selected (is in grey) and it says that any hardware was found. I check the elements of the computer (in "About this mac") and no hardware was found.
    I unplugged the energy, took out the battery and removed the card, and plug it again. I have to say that removing it and put it back again was easier this time than the first time, it moved smoothly). Nothing happened. Still won’t recognize it.
    What can I do? I bought the card in a tech ware house in Barcelona, FNAC who is a legal representative of the mac products.

    Hi!
    Sounds as though maybe your AE wireless card may have failed;
    and if you've tried more than a few times to re-seat the card into
    the slot and had no results, you may see about trying the card
    in another compatible computer to see if just the card is bad.
    You may be able to swap out the part to restore wireless access;
    but I am not sure of any situation that may limit your recourse
    through the reseller of the card you now have. They may not take
    it back, in other words. But to find out if the issue is your AE Card
    or some other potential issue is an important pursuit. So, if you
    can, perhaps a reseller of new parts can let you see if a new card
    will resolve this issue by trying a new card and see if it shows in
    the System Profiler; and if access to the internet is available nearby,
    to also see if it connects readily.
    Good luck and happy computing!

  • Airport extreme card install in 2008 mac pro

    How do i install the airport extreme internal card in 2008 mac pro 2.8 dual?

    Done, your link was ok!:) difficult to plug the tiny wires...on a Mac Pro early 2008, you must plug wire 1 and 3, the longer one at the bottom, the smaller one at the top....worked right away....p.s : take a little time to clean your Mac, you'll be amazed with the amount of dust !

  • Replacing Airport Extreme card (FLEX CABLE, GLUE?)

    The airport was no longer working in my powerbook and I found someone selling a working card locally, however, it was from a 15inch which from what I understand does not use the same type of cable to connect it. (i.e. there is no flex cable glued onto the input) I peeled the flex cable off the non-working airport but have no idea how to put it on the working card, or if it is even possible. I was thinking maybe it is heat activated and the residual glue from the original connection can be reheated to use?

    I'm already upgrading to 8GB of RAM and I'm planning on adding a Solid State Hard Drive since it will be a secondary machine. I really don't want to replace the optical drive too. At that point it's got new components in an old chassis with an old CPU.
    I've been to the Genius Bar (back when I lived in a place where there was one in town) and they couldn't replicate the issue but as soon as I left it started up again. There are times when it holds the signal for a good hour or more or days like today when it's dropping it every few minutes. It's completely random.
    No. This girl is going to go build her own PC with a fantastic GPU so as to kick some Diablo butt and the old Macbook Pro will only get used when I don't need it for anything serious. And I am most certainly not dropping another $2k + on a new MBP no matter how shiny they are! It's the end of an era as I've been using Macs exclusively for over 10 years now.

  • Airport extreme card in iBook G4 behaving strangely

    About 6 months ago my iBook started randomly dropping the network connection - the little 'waves' icon greyed out. When I clicked the airport icon, sometimes I could simply re-select my network and sometimes there were no networks listed at all (can usually see 3 or 4 neighbours' networks). In the latter case, re-starting seemed to fix this.
    This deteriorated and in the end I tried re-seating the card and checking the antenna connections. Subsequently there were no problems for about a week. Then it started again. This continued for a while and then a few days ago my mac shutdown unexpectedly. Now there is no airport connection except very rarely (e.g. once every 3 days!) it seems to connect for a few seconds.
    So now I'm using it connected via ethernet and everything else seems to work fine - although obviously not an ideal situation. I have ordered a replacement airport extreme card, however I was doing some research into this and some tests and it looks like there may be more to it than i first thought:
    System profiler shows the airport card:
    AirPort Card Information:
      Wireless Card Type:          AirPort Extreme
      Wireless Card Locale:          Worldwide
      Wireless Card Firmware Version:          405.1 (3.90.34.0.p18)
      Current Wireless Network:          wireless network not available
    The Mac hardware test also shows Airport and Logic Board as 'Passed'. (However, and completely unexpectedly reports a fault on the HDD - not sure that this is related though)
    The airport base station is fine - Verified that the network is up and accessible to other devices. Also, it is possible to transfer photos from my phone via bluetooth (noting that airport extreme and bluetooth are facilitated from the same card)
    Would be very grateful for any pointers or insights into this. Thanks for reading.
    Hardware: iBook G4 12" 1.33Ghz Manufactured October 2005. MacOS 10.4.11. Airport Extreme card + BT (OE) WD 320GB HDD (fitted March 2010)

    >unexpectedly reports a fault on the HDD - not sure that this is related though) 
    That could be your problem.  Once the hard drive starts dying all sorts of drivers and data on the hard drive becomes inaccessible.
    Backup your data NOW*:  http://www.macmaps.com/backup.html and get a new Parallel ATA/IDE (not SATA) 9.5mm 2.5" hard drive.
    Once you have replaced your hard drive and recovered your backup, we can focus on your wireless.  But your data is more important than some wireless issues. When you install the new hard drive, see if you can improve the connection of the airport card and/or antenna.
    Message was edited by: a brody.  Corrected link.

  • Installing Airport extreme card for 2008 Mac Pro

    After some searching I finally found which airport extreme card to get for my 2008 Mac Pro that I just purchased recently . According to the the link below in the Apple archives it is part number MB363Z/A. However the link further down in the thread for the instructions on installing the card doesn't seem to work any more. Anyone know where to find another link for some detailed instructions or pics on installing the card. I haven't found any as of yet. I installed the old extreme card in my G5 pretty easily, but this seems a little more involved in the Mac pro from what I've read so far.
    thanks, Craig
    http://discussions.apple.com/thread.jspa?messageID=6563623

    Ok never mind I found the old link seems to work now with detailed pics and instructions. Sounds like it's a bit of a pain but can be done with patience. Just have to get the card now.
    http://meanderingpassage.com/2007/07/18/how-to-installing-an-airport-extreme-car d-in-an-intel-mac-pro/

  • How do I install a airport extreme card in a mac pro (Intel 2008)

    How do I install a airport extreme card in my mac pro (intel) 2008 computer

    What Wifi Cards Do Mac Pro 2008 model use???
    http://meanderingpassage.com/2007/07/18/how-to-installing-an-airport-extreme-car d-in-an-intel-mac-pro/

  • Very high latency on my MBP 3,1 (mid 2007) with airport extreme card 0x168C

    Hi
    I wanted to let you know that i filled a bug report concerning a problem involving a MacBookPro3,1 and my airport extreme card (AirPort Extreme (0x168C, 0x87) Firmware Version 1.4.16.2)
    If you've got any feedback, please feel free to share it with me.
    Here's the bug report:
    Hello
    I'm experiencing very high latency on my MBP when connected using Wi-Fi in my living room and I believe this is a software bug.
    This is the trace of my ping test to my router (5m from me):
    macbookpro:~ laurent$ ping 192.168.0.254
    PING 192.168.0.254 (192.168.0.254): 56 data bytes
    64 bytes from 192.168.0.254: icmp_seq=0 ttl=64 time=1536.229 ms
    64 bytes from 192.168.0.254: icmp_seq=1 ttl=64 time=536.642 ms
    64 bytes from 192.168.0.254: icmp_seq=1 ttl=64 time=3444.466 ms (DUP!)
    64 bytes from 192.168.0.254: icmp_seq=2 ttl=64 time=2547.260 ms
    64 bytes from 192.168.0.254: icmp_seq=3 ttl=64 time=2671.552 ms
    64 bytes from 192.168.0.254: icmp_seq=4 ttl=64 time=1671.272 ms
    64 bytes from 192.168.0.254: icmp_seq=5 ttl=64 time=2619.991 ms
    64 bytes from 192.168.0.254: icmp_seq=6 ttl=64 time=1619.350 ms
    64 bytes from 192.168.0.254: icmp_seq=7 ttl=64 time=2362.474 ms
    64 bytes from 192.168.0.254: icmp_seq=8 ttl=64 time=1362.662 ms
    64 bytes from 192.168.0.254: icmp_seq=9 ttl=64 time=363.461 ms
    64 bytes from 192.168.0.254: icmp_seq=10 ttl=64 time=1407.557 ms
    64 bytes from 192.168.0.254: icmp_seq=11 ttl=64 time=1020.437 ms
    64 bytes from 192.168.0.254: icmp_seq=12 ttl=64 time=119.570 ms
    ^C
    --- 192.168.0.254 ping statistics ---
    14 packets transmitted, 13 packets received, +1 duplicates, 7% packet loss
    round-trip min/avg/max/stddev = 119.570/1663.066/3444.466/937.468 ms
    These are the details of my network when alt clicking on the network icon:
    ca:69:50:37:c7:b2
    Channel: 5
    RSSI: -54
    Transmit Rate: 54
    I'm using Channel 5 where my router is the only device available (checked with iStumbler and KissMac).
    I compared these results with another computer sitting at the same place:
    This is the trace of my ping test to my router using a PC laptop:
    C:\Documents and Settings\Laurent>ping -t 192.168.0.254
    Envoi d'une requête 'ping' sur 192.168.0.254 avec 32 octets de données :
    Réponse de 192.168.0.254 : octets=32 temps=2 ms TTL=64
    Réponse de 192.168.0.254 : octets=32 temps=2 ms TTL=64
    Réponse de 192.168.0.254 : octets=32 temps=3 ms TTL=64
    Réponse de 192.168.0.254 : octets=32 temps=4 ms TTL=64
    Réponse de 192.168.0.254 : octets=32 temps=3 ms TTL=64
    Réponse de 192.168.0.254 : octets=32 temps=4 ms TTL=64
    Réponse de 192.168.0.254 : octets=32 temps=2 ms TTL=64
    Réponse de 192.168.0.254 : octets=32 temps=3 ms TTL=64
    Réponse de 192.168.0.254 : octets=32 temps=3 ms TTL=64
    Réponse de 192.168.0.254 : octets=32 temps=6 ms TTL=64
    Réponse de 192.168.0.254 : octets=32 temps=4 ms TTL=64
    Réponse de 192.168.0.254 : octets=32 temps=8 ms TTL=64
    Réponse de 192.168.0.254 : octets=32 temps=4 ms TTL=64
    Réponse de 192.168.0.254 : octets=32 temps=4 ms TTL=64
    Réponse de 192.168.0.254 : octets=32 temps=4 ms TTL=64
    Réponse de 192.168.0.254 : octets=32 temps=1 ms TTL=64
    Statistiques Ping pour 192.168.0.254:
    Paquets : envoyés = 16, reçus = 16, perdus = 0 (perte 0%),
    Durée approximative des boucles en millisecondes :
    Minimum = 1ms, Maximum = 8ms, Moyenne = 3ms
    (PC: Win XP SP3 with Linksys Wi-Fi card)
    Obviously, my Mac has very high latency where my PC works as expected.
    I tried resetting the PRAM, but i didn't affect my results.
    I tried updating Airport with the latest AirPort Client Update (http://support.apple.com/downloads/AirPortClient_Update_for_MacBook_and_MacBookPro), but my hardware wasn't eligible for that update (Mid 2007 MacBookPro).
    I believe this isn't a hardware bug because i get acceptable ping results when next to my router or in other rooms of my flat.
    Can you help me with that bug ?
    Regards,
    Laurent
    Hardware Overview:
    Model Name: MacBook Pro
    Model Identifier: MacBookPro3,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.2 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 2 GB
    Bus Speed: 800 MHz
    Boot ROM Version: MBP31.0070.B07
    SMC Version (system): 1.16f11
    Serial Number (system): W874551DX91
    Hardware UUID: 00000000-0000-1000-8000-001B63B19195
    Sudden Motion Sensor:
    State: Enabled
    AirPort:
    Type: AirPort
    Hardware: AirPort
    BSD Device Name: en1
    IPv4 Addresses: 192.168.0.2
    IPv4:
    Addresses: 192.168.0.2
    Configuration Method: DHCP
    Interface Name: en1
    NetworkSignature: IPv4.Router=192.168.0.254;IPv4.RouterHardwareAddress=00:07:cb:3e:04:ef
    Router: 192.168.0.254
    Subnet Masks: 255.255.255.0
    DNS:
    Server Addresses: 212.27.40.241, 212.27.40.240
    DHCP Server Responses:
    Domain Name Servers: 212.27.40.241,212.27.40.240
    Lease Duration (seconds): 0
    DHCP Message Type: 0x05
    Routers: 192.168.0.254
    Server Identifier: 192.168.0.254
    Subnet Mask: 255.255.255.0
    Proxies:
    Exceptions List: *.local, 169.254/16
    FTP Passive Mode: Yes
    Ethernet:
    MAC Address: 00:1e:52:72:05:2c
    Media Options:
    Media Subtype: Auto Select
    AirPort Card Information:
    Wireless Card Type: AirPort Extreme (0x168C, 0x87)
    Wireless Card Locale: Worldwide
    Wireless Card Firmware Version: 1.4.16.2
    Current Wireless Network: kalamar
    Wireless Channel: 5

    Ok, I must have jinxed myself.
    High latency with my Negear WPN824v3. As previously mentioned, the other wireless computers connect fine. Latency remains regardless of the power connected or not.
    Please advise.
    PING 192.168.0.1 (192.168.0.1): 56 data bytes
    64 bytes from 192.168.0.1: icmp_seq=0 ttl=64 time=11.607 ms
    64 bytes from 192.168.0.1: icmp_seq=2 ttl=64 time=7280.106 ms
    64 bytes from 192.168.0.1: icmp_seq=3 ttl=64 time=9209.019 ms
    64 bytes from 192.168.0.1: icmp_seq=4 ttl=64 time=8237.475 ms
    64 bytes from 192.168.0.1: icmp_seq=5 ttl=64 time=7262.603 ms
    64 bytes from 192.168.0.1: icmp_seq=8 ttl=64 time=4313.763 ms
    64 bytes from 192.168.0.1: icmp_seq=9 ttl=64 time=3336.361 ms
    64 bytes from 192.168.0.1: icmp_seq=10 ttl=64 time=2339.579 ms
    64 bytes from 192.168.0.1: icmp_seq=11 ttl=64 time=1344.110 ms
    64 bytes from 192.168.0.1: icmp_seq=12 ttl=64 time=345.132 ms
    64 bytes from 192.168.0.1: icmp_seq=13 ttl=64 time=1191.119 ms
    64 bytes from 192.168.0.1: icmp_seq=14 ttl=64 time=3969.730 ms
    64 bytes from 192.168.0.1: icmp_seq=15 ttl=64 time=3992.111 ms
    64 bytes from 192.168.0.1: icmp_seq=16 ttl=64 time=3692.648 ms
    64 bytes from 192.168.0.1: icmp_seq=17 ttl=64 time=2927.634 ms
    64 bytes from 192.168.0.1: icmp_seq=18 ttl=64 time=2130.216 ms
    64 bytes from 192.168.0.1: icmp_seq=19 ttl=64 time=1437.424 ms
    64 bytes from 192.168.0.1: icmp_seq=20 ttl=64 time=2385.203 ms
    64 bytes from 192.168.0.1: icmp_seq=21 ttl=64 time=1393.622 ms
    64 bytes from 192.168.0.1: icmp_seq=22 ttl=64 time=396.783 ms
    64 bytes from 192.168.0.1: icmp_seq=23 ttl=64 time=1.295 ms
    64 bytes from 192.168.0.1: icmp_seq=24 ttl=64 time=115.793 ms
    64 bytes from 192.168.0.1: icmp_seq=25 ttl=64 time=3.137 ms
    64 bytes from 192.168.0.1: icmp_seq=26 ttl=64 time=10.240 ms
    64 bytes from 192.168.0.1: icmp_seq=27 ttl=64 time=2.709 ms
    64 bytes from 192.168.0.1: icmp_seq=28 ttl=64 time=9.958 ms
    64 bytes from 192.168.0.1: icmp_seq=29 ttl=64 time=1818.371 ms
    64 bytes from 192.168.0.1: icmp_seq=30 ttl=64 time=1470.613 ms
    64 bytes from 192.168.0.1: icmp_seq=31 ttl=64 time=472.520 ms
    64 bytes from 192.168.0.1: icmp_seq=32 ttl=64 time=2255.417 ms
    64 bytes from 192.168.0.1: icmp_seq=33 ttl=64 time=18198.039 ms
    64 bytes from 192.168.0.1: icmp_seq=34 ttl=64 time=23288.761 ms
    64 bytes from 192.168.0.1: icmp_seq=35 ttl=64 time=25150.840 ms
    64 bytes from 192.168.0.1: icmp_seq=36 ttl=64 time=26813.832 ms
    ^C
    --- 192.168.0.1 ping statistics ---
    63 packets transmitted, 34 packets received, 46% packet loss
    round-trip min/avg/max/stddev = 1.295/4906.111/26813.832/7241.136 ms

  • Airport Extreme Card work fine on new Mac Pro (Early 2008)?

    I was looking at this Airport Extreme Card ( http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=MTg 5Njg&fnode=home/shopmac/macaccessories/networking&nplm=M8881LL/A ). Is it simple enough to install? And does it work? I'm not a complete noob, and I have built my own PC before, but I'm wondering if there were any quirks when installing this since I'm fairly new with Mac Hardware.

    You do not need to have the Extreme base station. It is possible to set up the Express to "share" the routers internet capabilities and provide it through the ethernet port thus to your computer.
    You do however need to setup the Airport express to match some setting at the original base station(router). Unless your IT savvy, this could prove to be a hard task for the everyday user.
    If your trying to sustain high transfer rates... wired is always the solution. I personally used a 100ft Cat-6 cable, wired up through my large apartment ceiling to give "connected" benefits to various electronics at the other end. And the cable costs less than 99 dollars
    Your other option is to get what is called an extender.http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=23680 17&Sku=N100-2096&SRCCODE=GOOGLEBASE&CMP=OTC-GOOGLEBASE
    This one here works on the G network, and is even a netgear product. This also costing less than the Express.
    Hope this helps

  • Installing AIrport Extreme card (which one? and WHERE?) in Dual 1.8 G5

    I'm having an incredibly frustrating time trying to check out this (used) G5 which I thought, up until yesterday, might replace my G4 MDD. (Never mind that any topic I run a search for on the support.apple website returns NO results. Is it my antediluvian 10.3.9 and Safari 1.x--newest possible for that OS? But I digress...)
    I keep running in a circle of Google search results that keep bringing me to a .pdf showing an AE card installation on a single processor G5. While not vividly clear in the illustration, the architecture seems to be different. I don't see the same "landmark" components here as in my G5. My Apple Support search difficulties have frustrated a search for a manual for this model.
    Also I'm just now learning of the necessity of the Rube Goldberg-ian additional antenna that seems to be required. (As it sits, the G5 is about 3 feet away from the base station, but I guess I'll have to play along anyway and get one.) Having used an Airport card on a pre-Cambrian white iBook G3 >>>without any bloody antenna<<<, I find this too depressing to be laughable. ("...strain at a gnat and swallow a camel." --NASHVILLE, 1975; Robert Altman, dir.)
    I'm under the assumption that this beast came BEFORE the late 2005 makeover that necessitates the Airport and Bluetooth combination card. Please correct if I'm wrong about this.
    The card I bought on eBay is Model A1026 EMC No. 1951 (thinking an Airport Extreme Card is an Airport Extreme Card is an Airport Extreme Card...ain't that rich!)
    Computer is YM425(XXXXXX) 1.8 GHz DP/256MB 400 80GB/SD/G5200/56K
    I did the installation of the Airport (after having uninformedly bought an AE card first) card on the iBook, but I can't begin to see where one goes on the G5 desktop. I don't even see the connector cable that goes in the back of the card.
    I feel like my good intentions have landed me at Alice's tea table while hardly being on the cutting edge of anything. I'm a sheet of paper's width (see below) from just jettisoning this thing back to Craigslist whence I fetched it.
    (Although I've long waved the banner of "Think Different" superiority, I'm beginning there's not a sheet of paper's width of difference between the respective byzantine frustrations of Planet Jobs and Planet Gates. At least I didn't make the pricey leap all the way into the MacPro rabbit hole...)
    To sum up: which AE card, where does it go, what else isn't Apple telling me and are there any specific links?

    Hi, and a Warm Welcome to Apple Discussions and the Power Mac G5 Forum!
    From the details you have given, your G5 requires the Airport Extreme! card
    http://store.apple.com/Apple/WebObjects/ukstore?productLearnMore=M8881
    The installation instructions are here
    http://www.info.apple.com/usen/cip/pdf/g5/apec_c.pdf
    The antenna cables and connectors are pre-installed in G5s. The Airport Extreme! antenna connector, with the brass tip, is shown clearly if you click on photo #4 here
    http://tersus.no/bluetooth/
    (They are the Bluetooth instructions - the photo is for identification only)
    You will need an antenna
    http://docs.info.apple.com/article.html?artnum=86413
    which should have been in the G5 packaging (originally) - but can usually be picked up on eBay - or here
    http://www.mac-pro.com/Airport-Extreme-External-Antenna-for-Power-Mac-G5-Tower?s c=2&category=7286
    if not.
    There is a G5 manual here
    http://manuals.info.apple.com/en/PowerMacG5_UserGuide.pdf
    Please post again if you have any questions. Good Luck.

  • Kernel Panics when using Airport Extreme Card...I think

    So I have been to the Apple store 7 times in the last three days...here are the problems I've been having and what they've done. Any advice is greatly appreciated!
    All of a sudden I started having Kernel Panic crashes (a least 5 a day.) Seemed to mostly happen when I was browsing (using Firefox.) Also I would usually experience an intermittent connection to the internet before a crash. (i.e. I would be browsing, then the connection would be lost...I'd turn off Airport...turn back on...then a few minutes later while browsing...crash)
    Here is what I've done:
    - At first we thought it was software...after two erase/install, that wasn't it.
    - Maybe the new RAM from OWC...re-sat the RAM, took RAM out and replaced with factory RAM...had OWC send new RAM, that wasn't it.
    - Maybe it is logic board, factory RAM, or Airport Extreme card...Apple replaced today...and THAT wasn't it.
    - Got home after all these new parts and it crashed again while browsing wirelessly. So, I thought, "Could my Qwest wireless network be doing this!?!?!"
    Have tried some different settings with Qwest and am awaiting another crash.
    Does anyone have any idea what else I could try? (2 erase and installs, a new logic board, new RAM, new AE card, didn't do it!)
    I so appreciate any help or advice. I'm in the middle of a couple of major projects and cannot bear to go back to the Apple store for an 8th time!
    MacBook Mac OS X (10.4.9) Purchased as refurb. - but has new logic board, new RAM (2gb), new AE card
    MacBook Mac OS X (10.4.9)
    MacBook Mac OS X (10.4.9)
    MacBook Mac OS X (10.4.9)
    MacBook Mac OS X (10.4.9)
    MacBook   Mac OS X (10.4.9)  

    I don't have any solutions, but I had been reading about some folks having airport related kernel panics in the MacBook discussion forum. As a matter of fact, I had a kernel panic a little while back on my MacBook, and the crash log pointed to some issues with airport drivers. Here is what Macfixit says about these drivers and I quote:
    "Bad built-in hardware (including hard drives) Repeated kernel panics can be the result of incompatible, damaged or misconfigured built-in hardware. This includes built in AirPort, Bluetooth and other networking hardware, corrupt or damaged hard drives, faulty processors and more. Examine your crash log (as discussed in our tutorial "An introduction to reading Mac OS X crash reports") for clues as to which device is implicated.
    Sometimes the fix is as simple as re-seating built-in hardware. Make sure any PCI, PCI Express, AirPort and other expansion-type hardware is firmly and properly seated in its appropriate port.
    In other cases, the fix involves attacking the problem at a driver or kernel extension level. Again, examine your crash reports and look for components specifically linked to certain hardware. For instance, the following Mac OS X components are all used by Apple AirPort hardware, and can be implicated (by crash logs) in kernel panics:
    com.apple.driver.AirPortAtheros5424(100.21)
    com.apple.iokit.IONetworkingFamily(1.5.0)
    com.apple.iokit.IOPCIFamily(1.9)
    com.apple.iokit.IO80211Family(110.19)
    After determining device-specific components, you can try re-installing them -- either by performing an "Archive and Install" of Mac OS X, or downloading and manually placing items."
    http://www.macfixit.com/article.php?story=20060911080447777

Maybe you are looking for

  • Archive logs not getting shipped when we do a swtich

    Hi Team. I am facing an strange issue on one of our standby. After the setup of the standby when we enabled the MrM mode, the archive got shipped smoothly.After after sometime when we tried to switch log file and check if it was working or not. From

  • 23" Cinema Display VESA adapter... in 2011?

    I need a M9649G/A for my two 23" Cinema displays from 2008ish so that I can mount them via VESA mounts... I've googled the part but no 3rd party seller has them, and it's unclear if the $40 24" and 30" adapters work on the older 23" models.  Anyone k

  • I have forgot to install Solaris Management Console

    Hi all, I have just installed Solaris 10, and I have forgot to install SMC, and I really don't know how I can install it. So, how I can install the solaris management console ? Thanks Willits

  • How would I upload a photo to my motorola cell phone?

    How would I upload a photo to my motorola cell phone?

  • 16:9 Confusion

    Ok, I have scoured the forums and the internet, but I hope you guys can give me a once and for all answer to this. I recently purchased a camcorder (Canon ZR500) which does true (or so camcorderinfo.com says) 16:9. I am not super thrilled with it, bu