Replacing claps with a specific clap clip?

Greetings,
I recorded (live) a clap track. And after some EQ and processing I found that some claps were just not quite the sound i wanted.  I am wondering is there a good/efficient way to  just find my favorite clap and replace all the others with that?
thanks!
-caleb

Hi
Here's two ways that might do it for you:
Use the Marquee tool to copy one of the good claps, then use move to transient to line up with the ones you want to replace.
http://support.apple.com/kb/HT4326
Or, emply Drum Replacement to create a Software Instrument track, and then substitute the EXS instrument for a 'home made one" using one of your good Claps
http://support.apple.com/kb/VI257
CCT

Similar Messages

  • Working with only specific AVCHD clips from a large media card?

    I have a 64GB SDHC card with lots of AVCHD clips on them. I brought some into Premiere CS6 through the Media Browser to edit together, though I'm not sure what I want to do with them long term. Since they all reside on the card within the folder structure.
    1. What is the best way to just copy specific files from the media card so I can work on them more later without having to copy over the entire 50-64GB folder of all the AVCHD files?
    2. Is there a way to bring just the clips that I want to work with in CS6, convert them over into another format (lossless) so I can just use those clips again later?
    Thanks.

    Sometime you just got to try stuff.
    ITs NLE (non destuctive) and you wont break it.
    Spanned AVCHD clips are of a duration and file size that a single long continuous take may  require two or more files to record.  The AVCD folder structure has "bits" in it that facilitates this.
    MOS = without sound.  Therefore the video does not need to link to any other part of the AVCHD Folder Structure

  • Problem replacing black with a color

    I am having difficulty replacing black with a specific color (any color).
    I have a black and white image which is in PSD format and has RGB enabled.
    I have followed the instructions to replace a color via the following method:
    Enhance | Adjust Color | Replace Color
    I select the black color, and I select a replacement color, e.g. Red.
    The Red never replaces the black - the best it will do is turn it to some level of Grey.
    Any thoughts?
    I have loaded the sample file to the following location:
    https://www.photoshop.com/user/j29102s/testfile.psd
    thank you

    Here is a method using the brush tool.
    1. Make a new blank layer (background).
    2. Go to: Edit> Fill Layer and choose color (pick color)
        change the mode to multiply and click ok.
    3. Add another blank layer (hills) and change the blending mode
        to Lighter Color and then pick a color and paint the hills.
    4. Add another blank layer (river) and change the blending to lighter color.
        then paint the river.
    5. Repeat with a new layer for each of the things you want the same color.
    6. The advantage to using the brush tool with the layers and lighter color blending
        mode is your painting does not have to be exact. You'll see what i mean when you start painting.
    As you can gather by now there are a ton of different ways to do this in photoshop elements.
    I would try them all.
    MTSTUNER

  • Replace Footage with Current Effects and Attributes Applied to New Clip

    I made a mock-up commercial with comp videos from a website and now need to replace them with the paid versions of the clips. Is there an easy way to replace the footage and keep all the attributes and effects I put on the comps? I tried the replace function but fcp told me "Insufficient content for edit."

    Tom's right there, you can't replace a ten-seconds clip with an eightsecond clip.
    But also look up the paste attributes function. This allows you to keep all of your attributes while replacing just the media.
    *Copying and Pasting Specific Clip Attributes*
    *Clip attributes are all the parameter settings applied to a clip—for example, motion parameter settings, audio and video filters and their parameter settings, speed parameter settings, and so on. Copying and pasting selected clip attributes is a quick way to add nearly any attribute to other clips in an edited sequence. You can copy motion paths, frame cropping, and animated filter effects from one video clip to another.*
    *Suppose you have just applied three filters and a speed setting to one clip, and you decide that you want exactly the same effects to be applied to several other clips in the sequence. Instead of re-creating each setting clip by clip, you can simply copy the first clip, select the other clips, and paste only the specific settings you want into all of them simultaneously.*
    *When you copy a clip from the Timeline, you also copy all of its attributes. Instead of pasting duplicates of the clip you copied with all of its attributes, you can:*
    *Paste specific video or audio attributes that you want into other clips in your sequence.*
    *Paste only the clip’s video or audio content, with none of the attributes, so that the content of a clip is replaced. In other words, you can replace the clip but keep the parameter settings of the original clip.*
    bogiesan

  • I need to replace a color on my image with a specific color from another part of the image.  How?!

    I have spent over 2 hours trying to figure out how to replace a color on one part of my image with a specific color shown on another part of the image.  So far I have been able to go to "Replace Color" on my Adobe Photoshop version, but it seems that I can only change the hue and brightness of the color that it currently is.  I need to use a specific color so this does not help me.  Does anyone know how to complete the task I am referring to?
    Also, please keep in mind that I am using Adobe Photoshop 6.0, not a fancy cs version or anything.  So it's pretty old school...
    Any help/feedback is greatly appreciated!  Thank you.

    Hi brookehelene,
    You might consider making a selection the object and using a color fill layer set to the color blend mode instead of replace color.
    I used the same picture as kendallplant did and changed the color on the same flower by sampling the pink color from the flower to the right)
    (click on the screenshots below for larger views)
    1. Select>Color Range
       (i used color range because the dialog is somewhat similar to the replace color dialog, except one is making a selection instead of replacing a color)
       (there are many other ways to make the selection such as the magic wand, so if your more familar with the other selection tools you can use those instead to make your selection)
    2. Use the eyedroppers and fuzziness slider in the color range dialog to make the selection of the object.
       (in the screenshot below the white areas are selected and black areas are not)
       (your selection probably won't be perfect, but you can paint on the layer mask to refine the selection)
    3. After you press the okay in the color range dialog you'll see the selection (marching ants)
       At the bottom of the layers palette press the Create New Fill or Adjustment Layer icon
       to reveal a list and choose Solid Color.
       Then use the eyedropper to sample a color from your image and press ok.
       Change the Blend mode for the color fill layer to Color (top of the layers palette)
    4. As you can see a lot has been selected besides the flower.
        To refine the areas of color, paint on the layer mask with the paintbrush tool.
        Use white to add the color or black to subtract the color
        You can press the D key on the keyboard to get the default colors (black and white) in the toolbox
        and press the X key to switch between the two when painting on the layer mask.
    Even though the above takes longer you can easily change the color or modify the areas that you want to change the color on.
    To change the color you can double click on the color fill icon in the layers panel.
    You can also use other layer blend modes besides color such as hue, so you might try some of the others and see what they do.

  • Trying to access a specific movie clip with a string

    Ok, what I am trying to do is create as many movie clips as I
    need and then access those movie clips using string values. These
    string values are stored in an array and coincide with a given
    movie clips instance name. Check out the following code:
    I think my problem is that Flash is trying to call movie clip
    methods on a string instance. I'm not sure how to type cast in
    Flash, or even if it is possible, but how would I access the
    strings as movie clips?

    DuhChamp,
    > I think my problem is that Flash is trying to call movie
    > clip methods on a string instance.
    Bingo.
    > I'm not sure how to type cast in Flash, or even if it is
    > possible, but how would I access the strings as movie
    > clips?
    Use eval() or the array access operator, []. Details here
    http://www.quip.net/blog/2006/flash/actionscript-20/reference-objects-dynamically
    David
    stiller (at) quip (dot) net
    Dev essays:
    http://www.quip.net/blog/
    "Luck is the residue of good design."

  • Issue with language specific characters combined with AD-Logon to BO platform and client tools

    We are using SSO via Win AD to logon to BO-Launchpad. Generally this is working which means for Launch Pad no manual log on is needed. But  this is not working for users which have language specific letters in their AD name (e.g. öäüéèê...).
    What we have tried up to now:
    If the AD-User name is Test-BÖ the log on is working with the user name Test-BO with logon type AD
    If the logon Type "SAP" is used than it is possible to use the name Test-BÖ as the username
    Generally it is no problem in AD to use language specific letters (which means it is possible to e.g. log on to Windows with the user Test-BÖ)
    It is possible to read out the AD attributes from BO side and add them to the user. Which means in the user attributes the AD name Test-BÖ is shown via automatic import from AD. So it's not the problem that the character does not reach BO.
    I have opened a ticket concerning that. SAP 1th level support is telling me that this is not a BO problem. They say it is a problem of Tomcat. I don't believe that because the log on with authentification type SAP is working.
    I have set up the same combination (AD User Test-BÖ with SAP User Test-BÖ) as a single sign on authentification in SAP BW and there it is working without problems.
    Which leads me to the conlusion: It is not a problem of AD. It is something which is connected to the BO platform but only combined with logon type AD because SAP Logon is working with language specific characters.

    I have found this article with BO support:
    You cannot add a user name or an object name that only differs by a character with a diacritic mark
    Basically this means AD stores the country specific letters as a base letter internally. Which means that if you have created a user with a country specific letter in the name you can also logon with the Base letter to Windows.
    SAP-GUI and Windows are maybe replacing the country specific letters by the base letter. Due to that SSO is working. BO seems not to be able to do that. Up to now the supporter from BO is telling me that this is not a BO problem.
    Seems to be magic that the colleagues of SAP-GUI are able to to it.

  • Can we replace OracleSytemUser with a custom user in ldap?

    HI,
    We have installed soa 11g and configured Microsoft AD as ldap provider.
    I have couple of questions around this.
    1. Can we remove the default embedded authenticator totally? If yes what are the things we should keep in mind?
    2. We don't want hard coded users like "OracleSystemUser". Can we replace OracleSystemUser with our custom user, maybe assinging our user to OracleSystemGroup in our ldap.
    Would appreciate any help.
    Thanks
    Manish

    There are Office-type apps available for iPad.
    Skype is also available for iPad.
    Whether you, specifically, can completely replace a laptop with an iPad depends on what you use your laptop for. The iPad is not designed to completely replace a laptop. There are many things a laptop can do that an iPad cannot. Whether those limitations are an issue for you, depends on your laptop usage.

  • How to count ONLY fields with a specific value

    I modified the code below from the API reference to count combobox fields with a value of "MT" so I could total the number of a specific choice the form user input.
    var count = 0;
    for (var i=0; i<this.numFields; i++)
    var fname = this.getNthFieldName(i);
    if ( this.getField(fname).type == "combobox" && this.getField(fname).value == "MT" ) count++;
    this.getField("mTurb").value = count.value;
    Here's the problem: I tried to use a similar script, modified only slightly from this form, in another total field to tally a different choice made with comboboxes and the script continues to tally the first choice. An example of one of the modified versions of the script is below.
    var gcount = 0;
    for (var i=0; i<this.numFields; i++)
    var gname = this.getNthFieldName(i);
    if ( this.getField(gname).type == "combobox" && this.getField(gname).value == "MT" ) gcount++;
    this.getField("gPack").value = gcount.value;
    I suspect I'm just missing something painfully obvious to seasoned scripters, but I can't seem to figure it out and I need this script to be able to count the number of 9 different options in the comboboxes.

    OK, you can use a script like the following as the custom calculate script for the text fields that perform the counts:
    // Custom calculate script for text field
    (function () {
        // Declare and initialize variables
        var fn, s = "MT", count = 0;
        // Loop through the combo boxes
        for (var i = 1; i < 25; i++) {
            // Determine the current field name
            fn = "M" + util.printf("%02d", i));
            // See if the field value matches
            if (getField(fn).valueAsString === s) count++
        // Set this field value to the count
        event.value = count;
    Change the value of the "s" variable to match the item that you want to count. The first and last lines prevent the unnecessary creatio of global variables, which is good. It also makes it easy to transfer to a more general document-level routine, which would be event better, something like:
    // Custom calculate script for text field
    function getCBCount(s) {
        var fn, count = 0;
        // Loop through the combo boxes
        for (var i = 1; i < 25; i++) {
            // Determine the current field name
            fn = "M" + util.printf("%02d", i));
            // See if the field value matches
            if (getField(fn).valueAsString === s) count++
        // Set this field value to the count
        event.value = count;
    You would then call this function from the individual text boxes with the following custom calculate script:
    getCBCount("MT");
    and replace "MT" with the vlaue you want to count.

  • Lion replaces text with 'block A' characters in safari

    about 1/4 of the sites i vist now (including my own--in safari) have a 'block A' character where there is html text.
    does anyone know how to fix this?
    thanks.

    There are two articles on MacFixit about this.
    Fonts are implicated in both.
    http://reviews.cnet.com/8301-13727_7-20087102-263/webkit-sandboxing-conflict-cau ses-safari-block-a-font-problem/
    http://reviews.cnet.com/8301-13727_7-20085570-263/safari-in-os-x-lion-replacing- text-with-block-a-characters/
    Clearing caches and booting to Safe Mode has helped the majority of people experiencing this problem; however, for a few people the problem returns after a while, indicating that either Safari itself or the system's font configuration may be actively corrupting the font cache.
    .... (example)
    - If this happens, then unfortunately the approach would be to systematically disable system fonts using Font Book until the problem goes away, and then remove the specific fonts that are contributing to the problem.

  • Replace ieee80211 with kernel26?

    Hi all
    It has been a while since I last did an Pacman -Syu and was surprised to see this message
    :: Synchronizing package databases...
    current [################] 100% 47K 23.0K/s 00:00:02
    extra [################] 100% 227K 82.2K/s 00:00:02
    :: Replace ieee80211 with kernel26 from "current"? [Y/n]
    Is it correct?
    I've searched the forum and read the news about the new kernel - but there didn't seem to be anything specific about this. If there is please point me in the right direction.
    I have Arch installed on a laptop with a Intel 2100 wireless card.
    Thanks

    ipw2100 in the kernel is working nicely.
    You must also enable ieee80211 network stack, with the encryption you want ( likely WEP)
    However, you have to unpack the firmware manually ( ipw2100-fw-1.3.tgz) to /lib/firmware. It is not provided by the kernel(it's not GPL).
    The firmware can be found at ipw2100.sourceforge.net.
    Or you can do a pacman -Sw ipw2100 and pick the firmware files ( You don't need the module).

  • A really annoying problem with a button/movie clip

    I am having a problem with a button! its driving me insane
    because i managed to do it last week, but that was by chance and
    now i can't remember how i did it!
    I can get the button (i'm using gelright from the common
    libraries panel) and convert it to a movie clip(by pressing F8) and
    even attach a behaviour but when i play the movie it doen't work!
    when i move the curser over the button it changes into a hand, but
    will not act like a button, even though i have set the behaviour to
    'on release, go to and play keyframe 2'.
    Please help me, for the sake of my laptop goin through the
    wall!

    virgosam20 wrote:
    > first, i found the button i wanted in the common
    libraries (gelright) and
    > added it to the stage. I resized it and converted it
    into a symbol as a movie
    > clip. Then it got added to my library.
    > Then i deleted it from the stage and replaced it with
    the movie cip version i
    > had just converted it to. so now i have the same object
    on the stage, but now
    > its a movie clip and not a button.
    ok - you are running yourself around in circles - why did you
    delete it to the stage only to add it
    again? once you converted it to a movie clip, you had what
    you wanted on the stage - but then you
    deleted it and dragged another instance of the same symbol
    back onto the stage - there's no reason
    to do that.
    > Then i double clicked on it to bring up the movie clip
    timeline, but instead
    > of saying 'top, down, over, hit' (or whatever it says),
    it jsut said 'layer 1'
    > (but this was not my original stage as i have a number
    of layers on that one).
    Right - this is expected because yoyu are now inside the
    movie clip timeline - not the button timeline.
    > When i double clicked on it again, it brought up the
    right headings (top, down,
    > over, etc),
    Right - because by double clicking the button symbol you were
    then brought to "edit mode" for the
    button symbol.
    but there were about 5 layers that showed the different
    layers for
    > the original button.
    Huh? What "5 layers"? What do you mean "original" button -
    per your description there has only ever
    been 1 button you have been working with.
    > I think i have to add the button to each of the
    headings, bt there is no room,
    Lost you completely now - what do you mean add the button to
    each heading? I have no clue what you mean.
    > as when i did it before, there was only one layer for it
    and i had to insert
    > the key frames myself.
    Still losing you here.
    > I then added a behaviour to it using the Behaviours
    pannel, (selected
    > movieclip, then 'go to and play....') and it appears in
    the behaviours pannel.
    > But when i got to Play Movie, although the curser
    changes into a hand, the
    > button does not work.
    That's because you are applying a behavior for a button to a
    movie clip instead.
    I think you went wrong when you converted the button to a
    movie clip - i have no idea why you did
    that or why to think your button needs to be in a movie clip.
    >
    > Hope that can help you with what i've done and you can
    tell me where i've gone
    > wrong.
    >
    I just think you don't understand how timelines, symbols or
    buttons work yet in flash.
    1. drag a button to the stage.
    2. select it and open the Behaviors panel (dont double click
    it to edit it).
    3. add your actions.
    4. test movie.
    (no need for a movie clip here.
    -chris

  • Replace comma with dot

    Dear all,
    I'm getteing mad with the following issue and need your help.
    I'm working at a PDF-Form including a table. The Values in this table create a datamatrix. This works fine for now.
    Here is my issue: The values in the table are numbers like 12.2 but also 12 or 9 but maximum two digits in front of the "."(dot). Seperation character should be a "." In Germany there is the ","(comma) instead of the "." at the number block.
    For better usability it would be nice having a java script that replaces onBlur all "," with a ".". So I don't have to change the keyboard language to English.
    Is this possible and if yes, how?
    I am an absolutely noob on javascript, so please be patient and do not expect any specific knowledge.
    What I tried (menue is translatet from the German version, I don't know if it is correct:
    onBlur.replace(",", ".");
    I put this in (right click on form) -> properties ->action ->
    add action: on mouse exit
    choose action: run JavaScript
    click on "add"
    Then I copied the terminus from the top in the opening window. Ready (at least this was my thought...)
    It dit not work, now I nedd your help.
    Thank you for your hints, your help and your time.
    Adobe Acrobat XI (German) on Windows 7 64bit (also german).

    ***************SOLVED**********************
    The solution was much easier than expected:
    when you open "properties" by right clicking on the form, go to "validation" NOT "action" (make sure you are in the form editing mode: "tools" -> "forms" -> "edit")
    then chose "run user defined script" and click on "edit"
    type in the following line:
    event.value = event.value.replace(/\,/g, ".");
    click "OK" and then "Close"
    Then you are done. Now, when you leave the form field Acrobat checks if there is a comma and replaces it with a dot.
    For me this was the easiest way to make it work.
    ***************SOLVED**********************
    ***************GELÖST**********************
    Die Lösung war einfacher als gedacht.
    Öffnet man "Eigenschaften" mit einem Rechtsklick auf das Formular, muss man "Validierung" und nicht "Aktionen" auswählen. (man muss im Formulareditierungsmodus sein: "Werkzeuge" -> "Formulare" -> "Bearbeiten")
    dann unter "Benutzerdefiniertes Validierungsskript ausführen" auf "Berabeiten" klicken.
    Im Editorfenster folgende Zeile eingeben:
    event.value = event.value.replace(/\,/g, ".");
    Über "OK" und "Schließen" zurück zu den Eigenschaften
    Das war's. Nun ersetzt Acrobat im Formularfeld jedes Komma durch einen Punkt.
    ***************GELÖST**********************

  • Safe to replace gcc with gcc-multilib?

    It seems to me that every single useful package requires that I replace gcc-libs with gcc-libs-multilibs, binutils with binutils-multilib, and gcc with gcc-multilib, and it's frustrating. I'm trying to install pipelight in order to be able to do online schooling in Arch instead of having to switch to windows all the time, but I'm leery about replacing all these packages due to countless problems I've had with gcc-libs in the past. Is it safe to replace all these packages? Can't name any right now but there's been quite a few extremely useful packages that I won't install because it requires me to replace all these packages.
    EDIT: I'm sorry, correction, this doesn't happen with pipelight specifically. It happens when I try to install a dependency; wine-silverlight. Yaourt also tells me that it's an unsupported and potentially dangerous package, although I didn't see anything signifying that in the AUR. I'm starting to believe yaourt says this about every package.
    Last edited by xworld (2014-01-16 20:42:45)

    All AUR packages are unsupported, may be potentially dangerous and you should inspect the PKGBUILDs before using them to build and install packages.
    If you're using a 64-bit system and have to use multilib, you do install lib32-* or *-multilib packages, nothing wrong with that. Why do you think it's unsafe?
    xworld wrote:I'm leery about replacing all these packages due to countless problems I've had with gcc-libs in the past.
    Any examples?

  • Replacing footage with image sequence

    Hi,
       I was wondering if anyone knew how to replace footage with an image sequence. It seems like when I choose replace footage and navigate to my image sequence there is nothing I am able to check off for image sequence. So basically if I have an image sequence in my timeline, I can only replace it with a movie which defeats the purpose of using an image sequence. Thanks in advance!

    You need to have a single directory filled with one or more supported still images which are named with a number a the end for the 'Image Sequence' checkbox to be un-grayed out in the 'Import', 'Replace Footage' or 'Locate Files' dialog. From the screenshot above, it looks like you've met all those criteria and that the checkbox is not even there, as opposed to being present but dim. On windows 8 (which it looks like you're on) that checkbox would be in between the 'File Name' label and the bottom of the file list area. The fact that you're not there makes me think your on an older version before we had all the relevant features. I'd have to check to remember just when that would have been, but I know that as of CS6 the 'Image Sequence' dialog was definitely there for the Locate Files and Import dialogs, so it's reasonable that it was an option in the replace footage dialog too. It may be something system specific which is not allowing all the UI to draw in correctly when using OS dialogs. In that case, Kevin's suggestion might still be viable since the Link & Locate workflow uses its own Premiere UI instead of OS dialogs.

Maybe you are looking for