Replacing from BC to XI

Hi...Experts,
we are upgrading from sap 4.7 to ECC 6.0, in that we want to replace from BC to XI..
how can i proceed for this.... pls send me any documents for this query..
what type of adapters are prefarable for this type.
its very urgent
Thanks & Regards,
Pasi.

hi pasi,
we worked on this scenario in this u need to frame all the BC scenarios and need to design these scenarios in XI too.
there is no one to one replacement in this case.
it comes in a different project life cycle as a whole.
i think u r using SAP as source system for BC
no need to use any IDOC adapter in XI but i dont know what is ur reciever landscape in BC.
so now u need to focus on the adapters that u need to use depending on the type of recievers like JDBC for database and so on.
no need to use any adpters as source side as source is SAP and the data flow is IDOC.
if the data flow is through RFC then u need to use RFC adapter.
Thanks & Regards,
Rama Krishna

Similar Messages

I had to get my hard drive replaced from Apple, I lost all of my music obviously. My question is, how can I get all my music off of my iPhone onto iTunes? Since it's a new hard drive, the iPhone isn't recognizing this as it's home computer.

I had to get my hard drive replaced from Apple, I lost all of my music obviously. My question is, how can I get all my music off of my iPhone onto iTunes? Since it's a new hard drive, the iPhone isn't recognizing this as it's home computer.

You will need to use third-party software to transfer music from your phone to the iTunes Library. I recommend Phone to Mac - Pod to Mac | Macroplant.com.

My touch died and I got a replacement from Apple. I restored from backup, and it installed all my apps. My iBank and Docs to Go will not set up to sync. In both cases, when I enter the numbers it says they are incorrect. They aren't.

My iPod Touch died, and I received a replacement from Apple. I restored it from my last backup, using iTunes. This reinstalled my apps as well. These included iBank Mobile and Documents to Go. I have the desktop versions on my MacBook. When I attempted to sync I was directed to install the device. OK. In both cases, I get to the point where I am instructed in type in the numbers from the iPod screen into the desktop to set up the sync. When I do, i get an error code in Docs to Go, and "the number is incorrect" from iBank. I tried deleting and reinstalling the mobile app for iBank with the same results. Help please.

When you restore one device from a backup of another device, keychain items like passwords are not restored unless you used an encrypted backup.
Try logging into the two apps. Next I would try deleting the apps and redownload resetup the apps.

Replacement from the Value of an Attribute*

Replacement from the Value of an Attribute
With formula variables you can set the processing type Replacement from the Value of an Attribute and create a reference to the reference characteristic for the variable. The attribute Reference to Characteristic (Constant 1) is a dummy attribute that is available with each characteristic. It serves to create a reference to the characteristic, by which it does not need to be aggregated. By choosing this attribute, you can influence the aggregation behavior of calculated key figures in a targeted way and can improve performance during calculation.
1)what does this do in the query?
2)what is the value of the variable created ?(like 1,2 etc {i.e.} it changes or is a constant value like 1)?
E.g. i have created a formula variable zvar , (replacement path type) ref. char is wbselement, then what will be the value of the zvar if its used in a formula
eg. Formula 1 = kef1 kef2zvar.
what will be the value(s) of the variables in the these cases
1. project = 1000,1000.30.
2.project = 2000,2000.30.01
3.proect = 3000,3000.30.01,3000.30.02.
3.) as per the def. its a number which refer to a wbs, then in the FORMULA , will it consider the zvar as a VALUE or what would happen?
Edited by: jumboash on Oct 23, 2009 7:25 PM

Hi,
ZVAR is not considered as value in the calculation. It is used only to calculate the formula correctly without aggregation of the operands.
For example there are two materials m1 and m2 . total amount has to be calculated for these materials whose quantitys are 10 and 20 and whose prices are 200 and 300 respectively.
Case1:- if ZVAR is not used then the calculation of the fromula will be as follows
qty   Price    amount
10 * 200   = 2000
20 * 300   = 6000
30 * 500 = 15000     ->   The total amount shows is 15000 which is not correct
Case 2: - if ZVAR is used in the calculation of the formula
qty   Price    amount
10 * 200   = 2000
20 * 300   = 6000
                   8000   -> The total amount shows is 8000 which is correct
so using the ZVAR in the formula shows the correct result without considering the aggregation . This is useful in the case if the material is not part of rows.

IPod touch 5th generation (replacement from Apple Store) - yellow tinted screen

I have an iPod touch 5th generation replacement from the Apple Store, and the display is slightly yellow compared to "new" or floor models. There are also some areas where the yellowing is more obvious than others. Is it possible to get this replaced at an Apple Store?
I have read other posts where the yellow tint goes away within a week or so. I have had this problem for months.

Make an appointment at the Genius Bar of an Apple store and try
Apple Retail Store - Genius Bar

HT201198 i have 1 year warrenty and my iphone 4 buttons are playing up is it possible to get a replacement from an apple store

i have 1 year warrenty and my iphone 4 buttons are playing up is it possible to get a replacement from an apple store

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found

A Variable for Replacing From Date -- To Date

Hi Friends,
I am trying to create a variable that can replace From Date -- To Date ,
For Example In the Variable if the user enters 3 , It should Take Systems date ( today) and should show the resukts for the next three days ,
Like this for 4 days or 5 days ..... whatever is the input , The variable should take todays date and should give the result accordingly ,
Hope this is clear , Any sample code on this or any standard extractor or any Document describing this type of scenario would be great help ,
Thanks in advance,
sathy

Hi Sathy,
You can try the following.
Create a formula variable (YOUR_USER_ENTRY_VAR in this example) for number of days offset (user entry).
In customer exit we will calculate the TO_DATE based on system current date and entered offset.
Execute TX CMOD.
Choose either existing project or create a new one.
Press a button Components (or use Component radio-button).
Double click on a row with EXIT_SAPLRRSO_001.
Double click on INCLUDE ZXRSRU01.
In the body of this include place your code.
CASE I_VNAM.
WHEN ' YOUR_CUSTOMER_EXIT_VAR '.
IF I_STEP = 2. After selecting of input variable
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'YOUR_USER_ENTRY_VAR'.
CLEAR L_S_RANGE.
L_S_RANGE-LOW = SY-DATUM + LOC_VAR_RANGE-LOW.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
APPEND L_S_RANGE TO E_T_RANGE.
EXIT.
ENDLOOP.
ENDIF.
ENDCASE.
Activate the project.
Go back using green arrow each time activating the project.
There is also some info with examples in the system:
tcode SMOD, enhancement = RSR00001, select 'Documentation' radiobutton - Display. Make sure you do it in English.
Best regards,
Eugene

Why is the cloning and healing tool in lightroom 5 no longer showing the stamp where it is replacing from?

When I use the cloning and healing tool it used to show a stamp indicating where it was replacing from. It suddenly stopped working. I can still remove spots but cannot move it around to see where I could use alternate space to clone or heal.

The source should show on both Heal and Clone. Hit the H key to turn them off and on or pick one of the options in the Toolbar.

Wifi of my iphone 4s has grayed out within 3 months of my purchase..I have now got a replacement from Apple

Wifi of my iphone 4s has grayed out within 3 months of my purchase..I have now got a replacement from Apple but unfortunately it worked for only 1 day and the wifi got grayed out again...I tried resetting all my settings but all in vain. How many times have i to replace my iphone..Has Apple not thought of solving the wifi issues from the core. I have heard many users are having this problem. Why hasn't Apple taken any step to improve and solve this issue. After buying such a high end product, this is what u get??? Most of the Apple users are now shifting to Samsung phones..I was a great fan of Apple and have been using all apple products but this has really disheartened me..Apple please wake up!!!
iPhone 4S, iOS 6.1.4
I have this question too (0)
Reply
Tags: none (add)

Read http://support.apple.com/kb/ts1559

Replace from clipboard, or "connect overlapping wires" ?

I am going back through many of my early block diagrams and cleaning up the code
with things that I've learned since I started using Labview. A lot of this involves deleting
objects, then copy/paste from a good reference design into the old design.   However,
this often leaves a lot of broken wires to clean up.    For example, where I had individual
enums that are used throughout the design I am replacing them with typedef enums.
(I could not get the typedef controls to show up in my functions palette, but that's a matter
for a different post)
As it is my only choices appear to be "replace->Select a VI->[.llb file]->typedef->[OK]",
or delete the old one, paste in the new one, ctrl-B and re-wire. That second option seems
to go faster than the first one. But in either case it's a lot of click and drag to replace one
control, and there are scores of them to be done.
So the wire routing is identical, but it takes time to hook them all back up.
Is there any way to tell LV to "re- connect broken wires that overlap pins",
either globally or within a specified area?
Or is there a way to simply "replace from clipboard"?
Thanks and Best Regards,
-- J.
Solved!
Go to Solution.

JeffBuckles wrote:
Oh, dear, I think I hit "solved" too soon. I had used search and replace before for *text*, but not for *objects*.
It turns out that the object search is rather primitive. For example, I can find *all* FP controls, but I cannot find a *specific* FP control by name (no, not the label text, the object itself).   Also, when searching for FP controls, I can replace *all*, but I cannot replace individually selected controls. And the search results to not list the controls' labels, so I can't know which ones to individually select anyway. So I'm afraid this search/replace function has quite a ways to go before it is usable for this purpose.
Thanks and Best Regards,
-- j.
What versin of LV aare you using?
A method that can speed things up is to copy the type-def'd object into your clipboard then click on the object that needs replaced to select it then hit "ctrl-v" to replace the previous with the new. That will save you having to re-wire then nodes.
If you really want to un-mark a solution flag you can use the options drop-down to un-mark it. I still think Lynn's suggestion counts as a solution.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

XI replacement from old interface

Hi experts,
we have a requirement of studying on a proposal for xi replacement from the present different interfaces used by the client.
we have to analyse 1) how would we do the changeover from old interfaces to XI .
2) Would there be any advantage of going for XI for these interfaces.
I am giving the list of interfaces that are currently being used between r/3 and other systems.
a)Email
b) FAX
c)travel expenses
d)Master (salaries)
e) EDI
f) Invoice processing
g) Process control systems
h)material movement interfaces
i)delivery/invoicing
this is an upgradation from 4.6c to newer version.
What do you suggest. Will appreciate your inputs.
regards
Saras

Hi,
Advantages :
This will help you
Diff between Exchange Infrastructure and rest of EAI tools
a)Email - Mail adapter
c)travel expenses - check out the data incoming and try to select the appropriate IDOC - IDOC adapter will help if you select IDOC.
d)Master (salaries) -check out the data incoming and try to select the appropriate IDOC - IDOC adapter will help if you select IDOC.
e) EDI (use conversion agent,seeburger adapter will help
f) Invoice processing - check out the data incoming and try to select the appropriate IDOC - IDOC adapter will help if you select IDOC
g) Process control systems IDOC might work here too
h)material movement - check out the data incoming and try to select the appropriate IDOC - IDOC adapter will help if you select IDOC.
i)delivery/invoicing - check out the data incoming and try to select the appropriate IDOC - IDOC adapter will help if you select IDOC.
Regards
Agasthuri Doss

Formula variables with replacement from key

Hi Sdns,
Well We are doing Upgradation from BW3.5 to BI 7.0.. After Upgrade we got stuck up'd at reports.. We are facing an error for a report which is formula variables with replacement from key is not working. The final result is giving us unexpected results i.e, Itz showing the values as X.
We got some reference from Service.sap. We found a note which is 1005772. Howeer this Note is applicable for suport package level 12. But we are already in higher suppor package level 15.. So this note is not applicable.
Can anyone guide us if u people have faced this kind of issue.
Regards,
Aluri

Hi,
Replacemet path processing type can be used with Charceteristics variables, text variables and formula variables.
For example u have created two restricted Key figues for two
years sales comparison and u have used characteristics variables on 0CALYEAR.
The years for which we want to compare sales volume will be selected during the Execution.
If 2000 and 2001 be selected,
these can be assigned as text for restricted Key figures in the record.
Please go thorough the following links.
An application of Replacement path variable can be found here.
http://www.sd-solutions.com/documents/SDS_BW_Replacement%20Path%20Variables.html
Another application to get the Document Count: For example Number of Sales Orders.
Query formula-Counter???
Example for Replacement Path: Characteristic Variable.
http://help.sap.com/saphelp_nw04/helpdata/en/2c/78a03c1178ad2ce10000000a114084/content.htm
Variable Replacement Example
http://help.sap.com/saphelp_nw04/helpdata/en/af/809528939d5b4fbff7e16a5bdc0d85/content.htm
Example for Replacement Path: Formula Variable.
http://help.sap.com/saphelp_nw04/helpdata/en/ca/5f9ac61a205a459d0e7ef313d10321/content.htm
Hope it's helpful......
Thanks,
Kameswari.

Hi. My phone screen broke and I had it replaced from a phone shop. The guy said that while changing the screen and phone was blocked. It is now disabled for like 23,000,000 minutes and I can't restore it cause I dont have all the data sync to my computer.

Hi. My phone screen broke and I had it replaced from a phone shop. The guy said that while changing the screen and phone was blocked. It is now disabled for like 23,000,000 minutes and I can't restore it cause I dont have all the data sync to my computer. Is there anything I can do or can Apple do something if I give them the correct password?

As you had the iPhone opened by an unauthorised repairer ( Apple do not replace screens on iPhone 4)
Apple will not provide any service or support
Take it back to the "phoneShop" and tell them to fix it
You have no other alternatives
or try this
http://support.apple.com/kb/HT1212

Hi I bought an iPhone 5 from a friend. but he got it as a warranty replacement from Apple so he has no paperwork with the serial/IMEI. I need that kind of paperwork to be able to use my phone at work. what do I do to get it?

Hi I bought an iPhone 5 from a friend. but he got it as a warranty replacement from Apple so he has no paperwork with the serial/IMEI. I need that kind of paperwork to be able to use my phone at work. what do I do to get it?

That information, and more, can be found in the About page of the settings. Tap Settings > General > About and you'll see a lot of information about the device.

N97 GPS is useless. Can i get a replacement from N...

N97 GPS is useless. Can i get a replacement from Nokia?
My N97 GPS takes 20mins to connect in an open area, on highway. And in a crowded area it doesnt even connect at all.
Can i get a replacement N97 from Nokia in Canada? If so, what do i have to do?
I am in Canada.
Thanks.

in the usa you have 30 days to exchange your unit i am not sure what is the case for canada. did you call the customer care?
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Replacing from BC to XI

Similar Messages

Maybe you are looking for