Replacing hard drive - new screws needed

Hello Everyone, I need to fit a new hard drive in my iMac and the last owner has ruined the screws that hold the drive in its housing. Can anyone tell me which screws I have to buy - do they have a name/size etc. I have done this job many times and have never come across screw heads that are 'rounded out' before. Presumably the last owner didn't know his own strength!!!! Thanks

Hi,
Well they're 6 - 32 close to pan head or binding head but flatter, Phillips head. The originals are like #0 Phillips so if you jam a #2 in there it's easy to round them out.
Good luck/.
Richard

Similar Messages

A135-S2326 replacing hard drive (bad sectors) Need advice and opinions Please

Hi, (note pic below of my computers actual specs from this morning)
I have a Satellite A135-S2326. It has the max memory at 2GB, it came with 512 and I upgraded to 2GB. It runs Windows Vista Home Edition...
Anyhow, it accidentally fell off my bed a few days ago (darn dogs) and damaged my hard drive. Boot problems, errors, bad sectors, etc. I have tried everything to fix and to no avail. While I am currently using it I know I need to replace the hard drive ASAP before I can't turn it on at all one day... I am now saving all my files and stuff I need off of it to an external drive. The laptop did not come with a windows Vista restore CD so I am using Acronis software to make an image of the hard disc, hopefully it will work and I won't have to purchase my own copy of windows Vista.
Some questions I have are:
1.) Is it possible to upgrade the hard drive to a faster one / better one when I replace?
     The hard drive that came preinstalled is a Hitachi HTS541680J9SA00 80GB, which I believe from spec's documentation is a 5400RPM Serial- ATA ???
     What is the max size I can get for replacement and what is the max RPM, or do I HAVE to use a 5400RPM???
     What do you suggest?
2.) I have a copy of windows XP Professional w/SP2. Is it possible to put this windows XP Pro.w/SP2 on a fresh hard drive in the Satellite A135-S2326? If so, is there a different hard drive that I must have to do that? Also if an XP install is possible on a new hard drive, which drivers must I have for this laptop when I do it??
3.) And finally, could this laptop handle windows 7 business? Only asking because I can get a VERY cheap copy of windows 7 business from my school...I'm in college at DeVry and can get a copy of Windows 7 delivered to my door in 2 weeks for less then $30.00. So thought that MAY be an option....??? Not sure if my other spec's can handle it though???
4.) What would you suggest I do with the options I have, what is best thing to do in your opinion??
      Please see pic below of my actual computers specs from this morning, using Belarc Advisor...
Thank you in advance
Any help is GREATLY appreciated
Urgently waiting replies,
Tina from Florida
(tinafromflorida)
Computer Profile Summary
Computer Name:
Beanersputer (in MSHOME)
Profile Date:
Monday, September 21, 2009 9:29:54 AM
Advisor Version:
7.2x
Windows Logon:
nello
Operating System
System Model
Windows Vista Home Basic Service Pack 2 (build 6002)
TOSHIBA Satellite A135 PSAD6U-01800D
System Serial Number: 37334232K
Enclosure Type: Notebook
Processor a
Main Circuit Board b
1.60 gigahertz Intel Celeron M 520
64 kilobyte primary memory cache
1024 kilobyte secondary memory cache
Board: TOSHIBA IAYAA 1.00
BIOS: TOSHIBA V1.20 03/06/2007
Drives
Memory Modules c,d
78.45 Gigabytes Usable Hard Drive Capacity
13.51 Gigabytes Hard Drive Free Space
MAT**bleep**A DVD-RAM UJ-850S ATA Device [CD-ROM drive]
Hitachi HTS541680J9SA00 [Hard drive] (80.03 GB) -- drive 0, s/n SB2204SGCULZ6E, rev SB2OC7DP, SMART Status: Healthy
1918 Megabytes Installed Memory
Slot 'J401' is Empty
Slot 'J400' has 2048 MB
Local Drive Volumes
c: (NTFS on drive 0)
78.45 GB
13.51 GB free
Network Drives
None detected
Users (mouse over user name for details)
Printers
local user accounts
last logon
nello
9/21/2009 9:17:22 AM
(admin)
local system accounts
    Administrator
9/1/2007 9:32:47 PM
(admin)
Guest
9/12/2009 1:14:34 AM
Marks a disabled account;   Marks a locked account
Adobe PDF Converter
on Documents\*.pdf
Microsoft XPS Document Writer
on XPSPort:
Send To Microsoft OneNote Driver
on Send To Microsoft OneNote Port:
Controllers
Display
IDE Channel [Controller] (4x)
Standard Dual Channel PCI IDE Controller (2x)
ATI RADEON XPRESS 200M Series [Display adapter]
Generic PnP Monitor (19.7"vis)
Bus Adapters
Multimedia
ENE CB1410 Cardbus Controller
Microsoft iSCSI Initiator
ATI I/O Communications Processor USB 1.1 OHCI controller (2x)
ATI I/O Communications Processor USB 2.0 EHCI controller
Realtek High Definition Audio
Communications
Other Devices
TOSHIBA Software Modem
6TO4 Adapter
6TO4 Adapter
6TO4 Adapter
6TO4 Adapter
6TO4 Adapter
Atheros AR5006EG Wireless Network Adapter
isatap.domain_not_set.invalid
isatap.gateway.2wire.net
isatap.launchmodem.com
isatap.
Microsoft 6to4 Adapter #2
Microsoft 6to4 Adapter #3
Microsoft 6to4 Adapter #4
Microsoft 6to4 Adapter #5
Microsoft 6to4 Adapter #6
Microsoft ISATAP Adapter #2
Microsoft ISATAP Adapter #3
Microsoft ISATAP Adapter #4
Microsoft ISATAP Adapter #5
Microsoft ISATAP Adapter #6
Microsoft ISATAP Adapter #7
Realtek RTL8139/810x Family Fast Ethernet NIC
Teredo Tunneling Pseudo-Interface
Networking Dns Server:
Acronis Backup Archive Explorer
Microsoft AC Adapter
Microsoft ACPI-Compliant Control Method Battery
Logitech Driver Interface (2x)
HID-compliant consumer control device
HID-compliant device (2x)
USB Human Interface Device (2x)
Standard PS/2 Keyboard
Logitech HID-compliant Cordless Mouse
Synaptics PS/2 Port TouchPad [Mouse]
USB Composite Device
USB Root Hub (3x)
Generic volume shadow copy

You can use ANY 2.5" SATA hard drive of any size in that system. I would recommend one of the Western Digital Scorpio BLue's as they are reliable and offer good performance.
If it runs Vista it will run Windows 7. I would wait a bit before trying Win7 though as Toshiba hasn't released all of the Windows 7 drivers yet.
As for Windows XP, while it is possible to install XP on that system (and quite easily for that matter) Toshiba doesn't provide any of the XP drivers needed to get it to run properly. You could determine all of the various chipsets the system uses and go to each chipsat manufacturer's support site to see if they provide an XP driver to get it working, but I don't guarantee that they have all of the needed drivers. If you do decide to go ahead with this let me know and I'll post the directions for installing XP onto a SATA hard drive that doesn't ahve a floppy drive.
Right now your best choice is to replace the old hard drive and restore the system from your Acronis image. When ALL of the Windows 7 drivers become available you could install it in a dual boot configuration to determine if you prefer it or not. It is both a step up and a step back from Windows Vista. Some people will like it while others won't. Only you will be able to determine which you prefer.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Replaced Hard Drive - Do I need to purchase software again?

My Macbook hard drive failed, and it was not recoverable. We replaced a hard drive. Do I need to purchase softwares (Kenotes) again? I purchased this software about 6 months ago from the online apple store. I still do have an Apple ID. My OS is Lion.

If you purchased Keynote from the Mac app store, no, you do not need to purchase it again. Go to the app store, click on the Purchases tab and look for Keynote and click the Install button to the right.
If you purchased Keynote as part of the iWork suite on a disk, you should still have that disk and you can reinstall it using that. If you do not have the disk you will need to purchase again.

I have a new mini mac and i want to use my existing external hard drive but it needs to be reformated how do i do this without loosing all my old photos?

i have a new mini mac and i want to use my existing external hard drive but it needs to be reformated how do i do this without loosing all my old photos?

Formatting will erase the drive.
You need to copy the photo's to either your old computer, the Mac Mini or to a new external drive and then decide what to do with your existing external drive.
For example: You could use one External drive for Photo's and one external drive for Time Machine to backup both your Mac Mini and the Photo drive.

G62-234DX replaced hard drive with new Samsung 250 GB. Same size as installed.

G62-234DX Hard drive dead. I replaced hard drive with new Samsung 250 GB. SATA II hard drive and used the recovery Windows 7 Home edition DVD. Error message appeared after windows loads files and starts windows from the recovery DVD. An error dialog box opens after completing and indicates, This computer is not supported by the recovery discs. You will not be able to continue to recover this system with these discs. error: 0100-1425 -3627-3628-3623-3624. Hit OK and system powers down.

Hi:
If you purchased the recovery disks from HP, please see if making and running this first helps.
"CyberLink Recovery Discs utility resolves an issue where Recovery Discs sent from HP do not work on a new hard drive."
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-80183-1&cc=us&dlc=en&lc=en

Need help with replacement hard drive

My hard drive has stopped working on this computer and since i only purchased it on 10/2012 I really don't want to replace it just yet. I am trying to buy a new hard drive but I would like a Seagate. I want to upgrade from 1 TB to 2TB. I was wondering if there is a Seagate product out there that would be compatable with the original hard drive but in 2 TB.The original hard drive is a HDD GNRC 1 TB SATA 3 ECO 7200 rpm 3.5". I was looking at a Seagate 2TB SATA 6.0 but I do not know is the SATA 6 will work with the original SATA 3. Can you please help me or guide me in the right direction for a replacement. I also have the HP recovery CD's coming to me in the mail.Thanks,GinaCee

Hi Big_Dave,Thank you for your help. I found this hard drive at Newegg and I was hoping you could tell me if it would be compatable.Seagate Barracuda ST2000DM001 2TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive Bare Drive. Or is there any Seagate product you could reccomend? I have a Seagate external hard drive and I like thier product, so I was hoping that they made something compatable for my HP. I will be installing this drive myself. I have all the instructions from the HP website and it doesn't look that difficult. Just waiting for my restore CD's and a replacement hard drive so I can start this project. Thanks again!Gina

Hello, I am having a macbook air early 2008 and it is having a hard drive failure i need to replace the hard drive is it possible ? the hard drive number is HS082HB

Hello, I am having a macbook air early 2008 and it is having a hard drive failure i need to replace the hard drive is it possible ? the hard drive number is HS082HB could you please help !!

You can replace it with a solid state drive, see the one OWC sells here. The video on how to install it is here.
iFixit.com has used hard drives available here.
If it were me, I'd go with a solid state drive, as the prices have come down recently and the performance improvement is noticeable.

Suggestions on replacement hard drive

I'm needing a replacement hard drive for a 733MHz 128MB 40G Quicksilver. Anyone with experience on certain brands?
Thanks,
Jason

Jason:
A 120GB (ATA-100 or ATA-133) drive is perhaps the optimum size... You've confirmed that Mac won't see more than the first 128GB of any drive connected to the native drive bus on the logic board. You may add a drive larger than 120GB to this bus (in case you find a larger drive for less money than a 120GB one), but only the first 128GB will be recognized after formatting. For larger drive internal use at full capacity, you'd need to add a PCI controller card to hook the drive to.
To physically install the drive, you need to correctly set the jumper pins on the drive and then connect it to the proper connector on the ribbon cable. (I assume that the current drive is working and you'll be duplicating the data on it to the new drive. If I'm wrong, please let me know.) One of the drives will be pinned as master (single master/single drive) and connected to the end of the ribbon cable; the other pinned as slave and connected to the inline connector. They get mounted one above the other in the drive stacking tray that's in the Mac. The new drive will come with the jumpers, mounting screws and a spare ribbon cable, so you'll have all that you need).
If you need help with this, let us know after you've purchased the drive (pin setting positions vary on different brands). Don't drive yourself crazy with the installation manual that comes with the drive, which is confusing and Windows-oriented. Also note that the accompanying software CD is useless for Macs. You'll instead simply use Disk Utility to initially format (initialize) the drive.
As for cloning, I think that the most user-friendly software is SuperDuper, which I'm pretty sure you'll find to be a snap to use. (I'm a long time fan of CarbonCopyCloner, but recently tried SuperDuper to familiarize myself with it and was very impressed by how friendly it is.) It walks you through the volume duplication process in a few easy steps.
Gary
1GH DP G4 Quicksilver 2002, 400MH B&W rev.2 G3, Mac SE30 Mac OS X (10.4.2) 5G iPod, Epson 2200 & R300 & LW Select 360 Printers, Epson 3200 Scanner

IPod 4th Gen Click Wheel replaced hard drive; problems

Ok, So I replaced the 20gb hard drive with a new EXACT replacement hard drive, no other problems with iPod. But iTunes will not recognize it because the hard drive is not formatted. I tried formating it with Disk Utility but keep getting error messages. Im not sure what format to use. When the 4th gen came out Intel processors werent here so Im sure I need to simply format as Mac OS Extended. There is no HFS= format in Disk Utility. Im lost as to what to do. Please help??!

hmm - curiouser and curiouser
I've now managed to get it to manually update (after iTunes took 100% of system resources and I had to force quit it...) but that still doesn't really help me with the auto-sync feature which still won't work
aaaaaaggggggghhhhh

How to reinstall os x/data after replacing hard drive

I'm about to replace my hard drive after the original crashed. I have a macbook pro 17" and I have the original backup cd's, also a time machine backup on external hd.I'm installing a 1tb hdd from the 750gb original.
What is the sequence which I need to follow to restore my OS and data? The original OS is Snow Laopard, the one I ugraded to is Moutain Lion.
Apart from the sequence will the Ext hd have the operating system backed up on it or do I need to load the original OS disc and then the Apps disc or only the Ext hd backup?
As I'm replacing my hard drive do I need to format the new drive in disc utilities still, if so how?
Will I be asked for any passwords?
Any help appreciated.
Martyn.

Install the new HDD in your MBP.
Start the MBP with the Snow Leopard install disk holding down the C key.
Proceed with the installation until you see a menu bar on top of the display.
From the menu bar click on UTILITIES.
From the drop down menu select Disk Utility.
Select Disk Utility>Erase and format the HDD to Mac OS Extended (Journaled).
Proceed to install Snow Leopard. It will probably be 10.6.3.
Open SOFTWARE UPDATE and install 10.6.8.
Then you may install Mt. Lion or Mavericks.
Run Time Machine and install your user data. Refer to this web site for assistance if need be:
http://pondini.org/OSX/Home.html
Ciao.

Dv6700 broken HDD "#10009 replace hard drive"

Hi, My laptop model dv6700 and harddrive: SATA 250Gb. I have made recovery discs. Issue: hard drive gave up recently and in BIOS HDD checkup it showed "#10009 replace hard drive" Query: 1)since I need to replace the hard drive, i wish to upgrade it to 500GB.Is it possible or not?? 2)if yes, are there any constraints on size,make of HDD?? 3)Once i replace my HDD how to get my old OS(i got vista home premium along with laptop)?? 4)will there be a problem if i use my recovery discs on the new 500 Gb HDD?? 5)will there be any conflict in recognizing the new HDD of 500 Gb?? Is there any other way to solve this issue without replacement?? Thanks in advance!!
This question was solved.
View Solution.

Here are answers to your question.
1) You can upgrade to 500GB and its possbile without any problems
2) No constraints on size or make. You can use any brand or manufacturer of your own choice
3) You need to install your OS using recovery disks. There is a guide available over here
4) There will not be any problems if you using recovery disks on new HDD
5) There wont be any conflict. If you do face any issues, you can always post your query on the forums.
6) Unfortunately there is no other way. If the HDD test fails, it means its gone. Only option is to replace HDD.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Replacment Hard Drive from third party vendor for old 3rd gen Ipod

I have a 3 generation 20gb ipod, and after it`s 10,000 drop the hard drive dies. For several months I seach the net for a company to buy a replacment Hard Drive from. I settle upon "Ipodmechanic.com" for my replacement part becuase, they have a one year warrenty, apple certified, and have slightly cheaper prices than there competitors, plus the website looks nice. Anyway I order a 10gb instead of a 20 because I want to save some money and I don`t need all that space.
I get the Hard Drive a couple of days later and install it. Oviously something is wrong from the start and I figure It can be fixed with a restore from the ipod updater. Instead of a fix I get the words can not initilize restore please restore again. The situation continues to repeat itself with not solution. I can not fix my Ipod and I am stuck with a $140 Hard Drive. Also the packege the Hard Drive came in had in permenet marker, the words and symblo (Bad ?). I am not angary at what they sent me wether used or new, as long as it works. But what makes me angry is after I bought the Hard Drive Ipodmechanic stopped answering my emails. I had to ask for there phone number because it wasn`t posted on there site. I can not get in contact with them and if so I must request my bank to sees the fund they have of mine. I don`t believe they are doing this on purpose, maybe they are on vacation or had an emergancy but, it would be nice if they would inform there customers they are away, but, still with no respones what choice is there when they have my $140 and a warrenty they can not make good on.
Third Generation Ipod Mac OS X (10.4.3)

You can get a HD like this. It uses wifi to and an app to access the HD
http://www.seagate.com/external-hard-drives/portable-hard-drives/wireless/wirele ss-plus/?cmpid=ppc-_-wireless-_-g-_-us-_-hdd%20%2Bwifi-_-b

Have macbook pro early 2011, blank hard drive (new), no install DVD, inadequate internet connection. How do I install an OS in the thing ?

Have macbook pro 15" early 2011, blank hard drive (new), Install DVD not available and an inadequate internet connection.
How do I install an OS in the thing ?
Can I purchase an installation disk? (I think it originally shipped with snow leopard 10.6.6)
My first time with Macs and I would love to get it going.
Thanks....

You can purchase replacement discs from Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers.
You can upgrade the firmware to enable Network Restore: Computers that can be upgraded to use OS X Internet Recovery. After upgrading you can do the following:
Install OS X Using Internet Recovery
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

How to replace hard drive in mini 110-3131dx

Trying to replace hard drive in the mini 110-3131DX..... I have a replacement ... How do I open the case. I see a orange slider bar in battery compartment, but no screws to take out or covers to remove. It has a solid no opening base except where the battery is removed.
Thk
This question was solved.
View Solution.

You're welcome, Tim.
What operating system are you installing on the machine?
The specs state it shipped with W7 Basic. That OS should load without issues.
If you are trying to install XP, it will not install unless you load the SATA ACHI drivers either at the F6 prompt or you need to slipstream them into a copy of your XP installation.
If you are attempting to install XP, please read this link below and that should solve that issue.
Your notebook has the Intel NM10 Express Chipset.
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/SATA-drivers-for-XP-solution-on-0x000000...
Best Regards,
Paul

Question about replacing hard drive

Hey everyone. I had a question about replacing a hard drive for a 2012 midyear pro. I have replaced hard drives before on windows machines, but this is the first mac I have owned. It didn't come with a hard drive when I bought it, but I do have mavericks installed on a usb. As far as a new hard drive, will any 2.5 laptop hard drive work? I read it needs to be 9.5mm thick. Is that correct? As far as I am concerned, hardware is hardware and should be the same as replacing a hard drive on a dell laptop but wanted to see if apple has any weird restrictions.
Also, is there anything I need to consider or be aware of when putting in a new hard drive? Or can I just hook up the hard drive and plug in the USB and install the software onto the hard drive. Thanks
Excuse and ny ignorance as I am new to macs.

scottrf8 wrote:
As far as a new hard drive, will any 2.5 laptop hard drive work? I read it needs to be 9.5mm thick. Is that correct?
Yes. Any SATA drive will do with those specifications.
Also, is there anything I need to consider or be aware of when putting in a new hard drive? Or can I just hook up the hard drive and plug in the USB and install the software onto the hard drive.
Assuming that the installer is functioning correctly, install the HDD in the MBP and engage the installer. You should come across a 4 option menu. Select Disk Utility from it. Open Disk Utility>Erase and format the HDD to Mac OS Extended (Journlaled). One you finish that, you may install the OSX.
Ciao.

Replacing hard drive - new screws needed

Similar Messages

Maybe you are looking for