Replacing HDD with SSD, is it possible. T400

If it can be replaced, is it worth it??
Specs: 7417 Core 2 duo, 2 gig memory, 160 HD, xp professional
Message Edited by Frankim3 on 07-07-2009 06:10 PM
Message Edited by Frankim3 on 07-07-2009 06:12 PM

the T400 supports SATA2 mode. Unless you need constant high speed hdd access, then you should get the SSD, otherwise, i will just invest in a high quality 7200 rpm SATA drive.
If you are planning to get the SSD you should get the latest generation one, also you would need a 1.8 inch to 2.5 inch hdd mount adapter, otherwise the ssd won't fit in the T400 hdd slot.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

[MBP - 2008, 4,1] Best way to replace HDD with SSD

Looking to upgrade my 2008 Macbook pro with a new SDD.
What is the best way to install a SDD while still saving the data from my HDD? I've heard it's possible to clone the hard drive, place the info on the SDD, and then boot with it. I've tried my best googling it, but I can't seem to figure out how I would connect my SSD to my computer while the HDD is still installed? I don't have an external drive with SATA connections.
If I do have to do a clean boot with the SDD (After saving important documents on an external drive), would I need my OSX disks? It's been a long 4 years with this computer and don't think there is any chance of recovering the OSX boot disks. Is there a way to download these necessary to do a clean boot?
Thanks for helping a misguided student trying to speed up his laptop!

You have two basic options. First is simply replace the HDD with the SSD. Second is to remove the optical drive, move the HDD to the space where the optical drive was (you need a mounting kit for this) and install the SSD where the HDD was installed.
Visit OWC to see the various options they have that includes the special mounting kit, SSD, and installation tutorials.
If you go with the first option then you will need an external notebook drive enclosure in which to put the HDD when you replace it with the SSD.
As for cloning that is done as follows:
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Be sure you prep the SSD properly:
Drive Preparation
1. Boot from your old HDD. Open Disk Utility in your Utilities folder.
2. After DU loads select your SSD (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
I would also recommend upgrading your OS to Snow Leopard. You will need at least 1 GB of installed RAM for Snow Leopard.

Envy 17i replace HDD with SSD

I just purchased a new Envy 17t quad core touch screen with a 1 TB HDD 5400 rpm. At the same time i purchased a new Samsung 840EVO 500 GB SSD with the intent of replacing the slower HDD with the faster SSD. I figured it would be an easy switch (I replaced the drive in my older laptop without any issues). I figured it would be a few screws and a small panel removed from the underneath the laptop and everything would be done.
But after I received the new machine, got everything setup and running and moved the information from the HDD to the SSD, I turned everything off and turned the machine over and alas… there are no panels (as described in the documentation) as I was expecting. It just one siingle piece!
How do I get to the HDD to replace it? Am I supposed to remove all the screws and remove the entire bottom or does the top (where the keyboard is) pop off and you have access through the top?
Help!
This question was solved.
View Solution.

Then the correct model number is 17t-k000 and the videos I linked above I apply to you.

Replace HDD with SSD for HP ENVY 15t-j000 Quad Edition Notebook PC

I'd like to buy a HP ENVY 15t-j000 Quad Edition Notebook PC and a HP v300a 120GB SATA Solid State Drive with Upgrade Kit.
Now the SSD has a 7mm thickness.
My question is if I can replace the HDD with this SSD? How thick is the HDD bay in the laptop.
If it's more than 7mm will the SSD move inside it?
Thanks
This question was solved.
View Solution.

Hi,
The old HDD on your machine is a bit thicker but with at least 4 screws I don't think new SSD will floating around in the case. I actually put new SSD in one of my laptop (not HP) and no problem BUT I don't move this laptop around. If needed, blue tac may help.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

W540 Replace HDD to SSD

Hi ...
To replace the HDD with SSD, we just need the SSD.. right ?
No need for any special connector or adaptor.
cheers, Sumit

Hi Sumit_tayal,
Welcome to Lenovo Community!
As per the query we understood that you are looking for HDD to replace with SSD for your ThinkPad W540.
Yes it is same has HDD connector you don’t have to use any type of connector or a converter.
http://shop.lenovo.com/us/en/laptops/thinkpad/w-series/w540/#tab-tech_specs
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Replace existing HDD with SSD on a T530 - noob question

Hi all,
I have a T530 with conventional hard disk. I want to replace it with an SSD (probably Samsung 840 Pro). When I look at the replacement instructions on the website, they refer to the use of spacers when installing an SSD (as opposed to the rubber rails which apparently bracket my current HDD).
Do I need these spacers in order to install an SSD? If so, do I have to buy them from Lenovo?
Many thanks
Jason
Solved!
Go to Solution.

If its the same outside dimensions you transfer the rubber rails onto the replacement drive. They add shock protection to the drive although an SSD is pretty shock proof. It must not float around though!! If you don't use the rails you'd lose them and probably never find them again when needed.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

W530 - Replacing HDD w/ SSD - Installing Windows 8

Hi All,
My W530 will arrive next week and I'm pretty new to upgrading it myself, so I'm sorry if this sounds repeatative.
Windows 8 Pro 64
500GB HDD 7200rpm
I have already purchased the Samsung 830 256GB SSD and plan to replace the HDD with it. Also, already purchased an adapter for the optical drive for my HDD to go in. No questions regarding that.
My questions deal with installing Windows 8 Pro 64 onto the SSD. Most of the articles I have read talk about Windows 7, so I'm not sure if there is a difference.
Questions:
- Do I do a clean install or create a factory backup with the one installed on my HDD?
- Where do I get a clean install for Windows 8?
- If I do a backup, do I put the backup on disks or usb drive? I've read some forums that say Windows 8 can't be put on disks?
- Any step-by-step guides for Windows 8 that people have seen?
Like I said, I'm pretty new to this and want to do it right.
Thanks!
Solved!
Go to Solution.

I'm not from Lenovo, and still sorting this myself...
3: here's the procedure for making recovery media: Methodology to create Recovery Media and reload a Lenovo system with Microsoft Windows 8 preload
It wants a USB flash drive as the target. Recovery media gets you back to the as-shipped, right out of the box state.
Backup and restore are a different deal. That gets you back to the state of the machine when the backup was taken. Backups can be stored on HDD or other external media, and on CD/DVD media (according to the options offered, anyway) but that would take a whole bunch of optical disks.
One uses the oddly-named Windows 7 File recovery tools to save the backup image and create a repair CD/DVD that contains the actual recovery tools. I've tested this myself on an upated 7->8 machine. Burned a repair CD and saved a full drive image to external USB HDD. Restored to a new HDD and all was in place and working.
As I said, I'm still sorting this, so please double (triple!) check anything I've said before doing anything non-reversible.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Replaced HDD w/ SSD, replaced Sata Cable, can't install OSX

Hello All,
So I've got a Late 2009 13in MBP that I thought had a HDD go bad. Nothing unusual, so I replaced the HDD, had a second one "go bad." After a bit of trouble shooting, I ordered a new Sata cable and a a 512gb Crucial M4 SSD. Replaced both, and I've been having some trouble ever since.
I've tried to install 10.6, 10.7, and 10.8, and every single attempt has failed in it's own way. 10.8 refuses to create a recovery partition, 10.7 just hangs on first reboot after copying files and never reboots to finish the installation, 10.6 makes it half way and refuses to copy Essentials.pkg.
I did a test and used Carbon Copy Cloner to clone my other macbook pro (10.8) to the HDD with the 13in in Target Disk Mode, and it failed at first boot but after reparing disk permissions a few times I got it to boot just fine.
I'm left with two options. Either the new Sata cable is also fried, or the logic board is fried. The macbook has passed both Apple hardware test and TechTool Pro's hardware test. But no matter what, I can't get an OS installed on it the traditional way.
Just wondering if anyone here can shed some light on some possible solutions... this post is more of a last resort as I'm all out of ideas.
Thanks!

Could be the SSD.

Preferred way to replace hdd with sad

Hi,
currently I own a MacBook Pro with a 300GiB HDD. Because of all the iTunes stuff, which I want to leave where it is, the hard drive is getting fuller. I only have round about 40GiB left on my device.
I studied computer science and I already gave 8GB og memory to my computer, so I know what I am doing and I want to replace my hdd with an 400GiB ssd right now.
It seems it is SATA-2 2.5". So I guess every ssd should be fine, as long as it is good quality.
Now my question is, what is the best way to get my Lion back on the ssd?
I have a Time Capsule. So simplest way would be to put in the ssd and boot from my Lion DVD (which I created earlier) and restore the system. So here come to questions: What happens with partitions? The ssd is 100GiB larger, so does this work? What happens with the rescue partition and with the boot loader stuff?
A second way would be to install Lion directly from DVD and can I restore from Time Machine, then?
I am a little bit stuck here and do not yet know, would would be best? Any experiences that you might like to share with me?
The reason for the ssd by the way is that Lion got so brutally slow here :-(
Best wishes and thanks in advance
Christian

Assuming you have an external enclosure for the drives, this is how I have switched drives:
First connect it to the MBP and open DISK UTILITY and format the new drive to MAC OS EXTENDED (JOURNALED). (The side bar will show both drives, so select the new one)
Next go to RESTORE and drag the respective drives to the appropriate fields and click on restore. This will transferr all of the data from the original drive to the new one. This will result in both drives having duplicate data and may take a couple of hours of run time (you can have lunch or whatever).
Finally swap the new drive into the MBP and turn it on. I have found that the initial boot takes about a minute longer than what you are used to.
You can put the old drive in the enclosure and erase the duplicate data.
Caio

Z41-70 | Replacing DVD with SSD

Hey , I want to order the Lenovo Z41-70 in the next few days.I read in the internet that I have an option Replacing DVD drive with SSD.Anyone can confirm it? if its possible which Caddy I have to buy? Thanks !

I'm using dv3533tx with Corsair 180GB SSD.
First, I try to run restore disk which i create with system restore, It happens same trouble!!
Second, I try to run restore disk from recovery media which brought by HP. Originally.
I success to recovery from DVD to SSD.
FInally, I success to update Windows 7 using WIndows 7 Home Premium (32bit) upgrade disk.
Please contact your hp dealer and whether you can get recovery disk ( if optional)

Swapping HDD with SSD (+Software Cloning)

Hi all,
I've been wanting to swap the 2011 MacMini's HDD with an SSD drive. I am currently running Windows 7 on the mini. What would be the best way to clone everything from the current MacMini internal HDD to the new SSD before the swap? Also, are any additional parts (cables etc.) needed to install the SSD or is everything inside reusable?
Thanks.

Please note that changing the hard drive is not considered
a user servicable function, only changing RAM is and therfore
will void your warranty (clearly stated in the user manual).
Just needed to put in that disclaimer so that you were aware.
You haven't stated, but I am assuming you are using Win7
in a Bootcamp partition, which will complicate things.
There are many SATA to USB adapters out there, so you will
want to get one of them. You will eventually neeed Winclone
(free) to put the Win7 volume on the new drive. Also, to be safe,
get a USB stick.
Cloning the OSX stuff will be simple.
1. Create a Recovery volume on the USB stick by first
      downloading Lion Recovery Assistant. Should do this
      any way whenther changing hard drives or not.
2. Connect the SSD with the SATA adapter while booted
      into the current system and Partition with GUID scheme
      and format with Mac OSX journalled.
3. With your Recovery USB stick plugged in, reboot holding
      down Option key.
4. When presented with the boot selection, select the USB recovery
      stick.
5. Once things load up select Disk Utility and do a Restore
      from the internal volume to the external. This will clone
      the Recovery HD as well as the OSX install.
6. Have lunch, do laundry or whatever as this will take awhile.
7. When the Restore is complete, as a quick check, reboot
      holding the Option key and select the newly cloned volume
      to insure it is bootable. It will take time to boot since it is USB
      but a good check before putting it in the case.
8. If all is well, you can swap your drives.
9. Next, boot to the new internal an run Bootcamp and create your
      Windows partion, follow through to the Win7 install and from
      the windows installer format the partition to NTFS but then
      quit the installer after this is complete.
10. Next, plug your old drive into the SATA adapter and run Winclone.
       You should be able to select the external WIndows partition
       as the source and the internal Windows patition as destination
       and just clone.
1 through 7 will definately get you OSX and Recovery HD on the new drive
and the rest "should" get you Windows.

Change HDD with SSD in Notebook HP ENVY 15-k000nl - Warranty expiration - Maximun RAM Upgrade

Good morning,
I have bought the above notebook one week ago, in the HP main site there wasn't photo about the rear and when I saw there is no easy way for chanhe HDD to SSD, I have to unscrew about 15 screws located here and there
Just I would like know if I change the SSD the warranty will expire?.
At the same time please can I upgrade the RAM to 16 GB DDR3L? which is the Maximun RAM Upgradable?
Best regards
Christian

Hi, Christian:
Yes, if you replace the hard drive or memory, the warranty will be voided as neither component is a DIY (do it yourself) project.
Please see the service manual at the link below, chapter 6 for the authorized service center removal and replacement procedures for those components.
http://h10032.www1.hp.com/ctg/Manual/c04409752.pdf

Can I replace DVD with SSD drive on Satellite P?

Hi everyone !
I would like to know if I can replace DVD by caddy's SSD ?
If I do it about that, Do I loose my warranty ?
Thanks.

I dont know what notebook model you have but in most cases such replacement (ODD ? SSD) would work in case the notebook would support the slim-select bay.
This was the case in older Tecra and Portege notebooks
I guess Satellite notebooks dont support such upgrade but this is just an assumption..
Warranty?
Well, if you would disasemble the notebook, the warranty will be canceled

Replacing Pavilion g7-2233cl HDD with SSD?

I've got a Pavilion g7-2233cl that the HDD recently failed on, was considering switching to an SSD. I'm trying to figure out if the SSD I'm looking at is compatable with my machine.
This is a link to the product on Amazon.
http://www.amazon.com/SanDisk-Solid-State-Drive-SDSSDH-060G-G25/dp/B005F3000W/ref=sr_1_1?s=electroni...
Thanks!
This question was solved.
View Solution.

I cannot recommend a 60 gig drive. A basic install of Windows is going to run about 20 gigs and you are going to have hibernation files and restore files, apps (MS Office is 10 gigs plus) and such and before you know it the drive will be full. You actually can't fill it 100% so the real capacity is about 55 gigs tops. Yes, I am going to say get a 128 gig. Here is a 128 gig for not very much extra money:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820211719
if this is "the Answer" please click "Accept as Solution" to help others find it.

Replacing the HDD with SSD and reinstalling Mountain Lion

Hello,
I have a MacBook (Mid 2010) since August 2010. Since then, I have been using Time Machine and every time Apple releases a new OS, I download it from the Mac App Store and put it on a USB so that I can boot from it, whether to reinstall the OS or in case I faced Hard Drive problems.
My HDD is dying slowly, so I planning to get an SSD. The version of Mountain Lion that I have on the USB is 10.8.
The question is, do I have to download a newer version of Mountain Lion (say 10.8.3) from the Mac App Store knowing that I will be restoring from Time Machine?
Thank you..

Since you want to restore what's on TM to the SSD, the SSD needs to be booted from to receive the restored files and to do that, the SSD has to have an OS on it. And since you'd want to have the SSD's OS updated to the latest ML version eventually, you might as well do that first, since, to some degree, it's also a test of the SSD's functioning. Since you already have the Combo updater, you could just run that, and since it's only a bit over 800 MB, it might even fit on the flash drive. I don't believe that migrating from a TM file made by and containing 10.8.3 data would be problematic when initiated from a 10.8.0 installation (which is I think what you're asking), but there may be some subtle software changes we don't know about that could come back and bite. So starting the migration after updating to 10.8.3 would be the safest bet. At the same time, Setup Assistant brings your existing account stuff over to just reestablish your existence on the SSD, while Migration Assistant is run after a new account has been set up on first boot, so I'd think Setup Assistant is the better way to go.
In which case, how about this: when you run the Combo updater, you are given a choice of which drive you want to install it on. If I remember the sequence correctly (it's been a while since a fresh install), you run the installer, which transfers files to the target disk, and then reboot. The installation takes place on the target disk which then reboots again to begin the setup process. When the startup chime sounds the second time, use the option key to run Startup Manager and pick your flash drive to boot from again. If you already have the Combo updater on the flash drive, run it from there and pick the SSD as the target. When it's finished, if it doesn't start from the SSD, choose that as the Startup Disk (check to see that it says 10.8.3 in Preferences) and when it boots, start the Setup Assistant process using TM.
Or is the flash drive only an installer, meaning it doesn't actually have ML installed on it so you can't use it like an actual boot disk from which you can do normal boot disk things?

Replacing HDD with SSD, is it possible. T400

Similar Messages

Maybe you are looking for