Replacing HH2 with another router

Hi folks,
I'm going to be replacing the HomeHub v2 with a shiny new Netgear WNR3500L sometime in the next few days.
A quick question (or two, actually ) - 1. What's the "recommended" procedure for installing a new router? I'm assuming that it's something along the lines of "1. Power down all network equipment; 2. Power down HH2; 3. Power down OR modem" then just doing the reverse of the above to connect the new router.
Second question - When I initially set the new router up, obviously I will have to configure the web interface to connect via PPPoE and use the HH's login credentials - Will this cause the OR modem to resynch? I obviously don't want too many resynchs, as I have a max profile which I would like to keep tyvm.
Thanks in advance for any thoughts/suggestions/help.

loonboy In message 10 of THIS thread has done a similar thing, and appears to be easy....
"the home hub 3 is jsut rubbish, i tried every setting in there and ended up buying a new router myself
i got the netgear n750 and i got to say it was just plug in and throw the setup disk in ti and it was away".
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR)

Similar Messages

HT204053 If I delete an apple ID from my device (ipad) in order to replace it with another, will I lose all the apps that are already on the device or will they stay there?

If I delete an Apple ID from my device (ipad) in order to replace it with another Apple ID, will I lose all the apps/itunes/etc. that are already on the device or will they stay there?

It won't delete anyting, it will only change the ID.

My new apps have changed to try within creative cloud; and my installed apps will not authenticate. I recently canceled one subscription and replaced it with another.

My new apps have changed to try within creative cloud; and my installed apps will not authenticate. I recently canceled one subscription and replaced it with another. Can you please look at it and correct?

Solution for Windows 8.1: Locate the C:\Users\USER\AppData\Local\Adobe\OOBE folder. Log out of Creative Cloud and from Task Manager end task for Creative Cloud. From the OOBE folder delete ALL files. Do not delete folders (com.adobe.accc.apps & com.adobe.accc.home). When complete, restart Creative Cloud and log in with ID and Password.

Using WRT54G and WET11 with another router as the Gateway

I have a wired network in the house with access to the Internet through a router on the 2nd floor. I connect a ReplayTV DVR in the basement to the network with a Cat5 cable running across the floor between the DVR and a switch. I'd like to replace that with a wireless solution.
I have at my disposal one WET11 bridge and two WRT54G routers. Neither of those routers is the one connecting the house to the cable modem. Is there a way I can connect one of the WRT54G routers to a switch in the basement and have it talk to the WET11 connected to the DVR on the other side of the basement?

I made some progress, but then ran into a couple of snags. I'm not routing with the WRT54G so I connect it to a switch through one of the 4 ports that is not the one labeled Internet.The network looks like this:
Cable Modem --> Netgear Router --> Switch --> WRT54G(port 1)
Laptop --> WRT54G(port 4)
With that cable arrangement I was able to log in to the WRT54G's administration page from my laptop, give the WRT54G a name and change it's IP address to 192.168.1.251. I left the subnet as 255.255.255.0.I also started to configure some other settings, but I did not write them down. I was able to access the Internet from the laptop at that time.
I was also able to move the cable going from the laptop to port 4 on the WRT54G with the WET11 Ethernet Bridge and could access the Internet. And, I was able to remove the bridge, turn on the laptop's wireless capability and access the Internet through a wireless connection to the WRT54G.
I tried to access the WRT54G's admin page wirelessly, but was not able to get to the login screen. I ran out of time and set everything aside for a week. When I got back to it, I was unable to access the WRT54G's loging screen. I can still connect the laptop to port 4 on the WRT54G and reach the Internet, but I cannot do so using the bridge.
Is there some tool I can use to determine the IP address of the WRT54G? I tried resetting (using the button on the back), and I tried several IP addresses in addition to the one I'm pretty sure I used. I'm assuming that I'm trying to log in using the wrong IP address.
I have a second WRT54G that I can still log on to. However, I don't want to do anything with it until I understand what I did wrong with the first one. (Both of them are version 6.)
Another snag is that I was never able to get the setup program to find the WET11. It claimed that it couldn't find the one I had plugged into the laptop's Ethernet port, even though I was able to connect to the Internet using that bridge to the WRT54G. However, that does not work anymore.
Pointers as to what went wrong would be most appreciated.
Thanks.

Backup DC past tombstone and need help replacing it with another DC with the same name and IP

Hey Everyone
We have a single domain in a forest with 2 DCs with AD integrated DNS configured. The primary DC with all the FSMO roles is a VM (Server 2008 R2) and the backup DC is a physical server (Server 2008 non-R2).
The backup DC's hardware is very old and has been giving us a lot of issues where the system would intermittently BSOD, freeze, black screen only etc. and as a result, the server was turned off for a very long time, definitely beyond the default tombstone
lifetime of either 60 or 180 days.
We want to replace this bad backup DC with another physical server which became available as a spare and is much newer and in a working condition hardware wise. We also wish to ultimately give it the same name (FQDN) and IP to basically make it an outright
replacement for the current bad backup DC.
My questions are:
1.) If we are in a position where the bad server could possibly physically boot and start the operating system and have network connectivity, will we be able to use DCPROMO as one would normally do to demote this DC, or will it have to be done forcefully,
while keeping in mind as I said that the DC is way past the tombstone lifetime period?
2.) If it has to be done forcefully, I am aware that the meta data needs to be cleaned up in AD on the working primary DC, although I have never performed such a process before. If this is done, are there any other things I need to look out for or do
before I attempt to replace it with the other server which I will set up wit the same name (FQDN) and IP, then add to the domain, and then lastly promote as per normal using DCPROMO?
I know we will have to upgrade the scema to 2012RM as the replacement backup DC will be running this newer operating system.
Anything else you wish to add or point out to me would be highly appreciated. Thank you in advance.
Regards,
CTV

Hi,
I would suggest please do the metadata cleanup using the script and then remove object from below DNS console and then run the repadmin /syncall /Aed
https://gallery.technet.microsoft.com/scriptcenter/d31f091f-2642-4ede-9f97-0e1cc4d577f3
Repeat running the vbs script till the wrong/unnecessary dc’s are removed.
         Cross check the removal – dsa.msc [ad users and computers] > Domain Controllers OU
Adsiedit.msc
Expand domain partition, select OU=Domain Controllers, make sure only the necessary domain controllers are listed.
Delete the incorrect domain controllers.
Dnsmgmt.msc [Dns Management]
      Expand the forward lookup zones\_msdcs folder
i.      Make sure only the actual domain controllers are listed, delete wrong Alias recordsremove wrong name server records
ii.      Select the container [forward lookup zones\_msdcs.domain.com\dc\_sites_\sitename\_tcp] > delete incorrect _ldap and _kerberos records are listed.
iii.      Select the container [forward lookup zones\_msdcs.domain.com\dc\_tcp] and delete incorrect _ldap and _kerberos records
iv.      Expand the [forward lookup zones\_msdcs.domain.com\domains\guid\_tcp] and delete incorrect _ldap entries
v.      Select [forward lookup zones\_msdcs.domain.com\gc] – delete incorrect HostA records
vi.      Expand the [forward lookup zones\_msdcs.domain.com\gc\_sites\sitename\_tcp] – delete incorrect _ldap entries
vii.      Select the [forward lookup zones\_msdcs.domain.com\gc\_tcp] – delete incorrect _ldap entries
viii.      Select the [forward lookup zones\_msdcs.domain.com\pdc\_tcp] – delete incorrect _ldap entries
      Expand the forward lookup zones\domain.com folder
i.
Delete Host(A) records of dc’s which are non-existant.
ii.
Correct the NameServer (NS) records
iii.
Follow steps similar to ’ A ii ‘ >> ‘ A viii’
         Dssite.msc [Sites and Services]
      Expand the [Sites\Sitename\Servers] – delete incorrect server’s
B.      Delete incorrect subnet configurations [Sites\Subnets]
      Delete incorrect site links [Sites\IP]

Batch replace color with another color

Hi,
I would desperately need some assistance in trying to accomplish batch editing of ai-files via JavaScript.
What I would need to do, is go through a number (many!) of files, find items with certain swatch color (referenced by its name), and replace the item-fill with another swatch-color (also referenced by its name). Then save the document with another name.
Other parts I have managed to do, except find/compare/modify the fill color of an item.
I have gone through these forums and tried a number of things to a point where I am currently very confused and frustrated
Some details (if it helps any), I'm using Illustrator CS3 and JavaScript.
Here's the closest where I got with trying to find a certain color and eventually changing it:
#target illustrator
var sourceFile, findColor, replaceColor;
sourceFile = new File().openDlg('Please select your Illustrator file…');
open(sourceFile);
var docRef = app.activeDocument;
findColor = docRef.swatches.getByName("vih");
// replaceColor not yet used anywhere
replaceColor = docRef.swatches.getByName("sin");
for(var obj = docRef.pageItems.length - 1; obj >= 0; obj--) {
    if(docRef.pageItems[obj].fillColor == findColor) {
        alert("Match found"); //It never seems to get here, so my comparison clearly is not working?
    else {
        alert ("No specified color found!");
docRef.close();
(and yes, I'm completely new with java-scripting, so even this is constructed from bits of sample-scripts and other scripts found from these forums)
Please, I would really appreciate any help, this can't really be such a difficult task to do... can it?
BR,
Johanna

I only tried a very basic test in my case ALL path items were filled with various CMYK swatches and the swap did take place so the comparison did work. I would suspect that you have a path item that contains NO fill so any of its properties would be undefined. You can also include this in your code too. This should work for both filled and stroked path items in CMYK art.
#target illustrator
var docRef = app.activeDocument;
with (docRef) {
var findColor = swatches.getByName('vih').color;
var replaceColor = swatches.getByName('sin').color;
for (var i = 0; i < pathItems.length; i++) {
if (pathItems[i].filled == true) {
with (pathItems[i].fillColor) {
if (cyan == findColor.cyan && magenta == findColor.magenta && yellow == findColor.yellow && black == findColor.black) {
$.writeln('True');
cyan = replaceColor.cyan, magenta = replaceColor.magenta, yellow = replaceColor.yellow, black = replaceColor.black;
} else {
$.writeln('False');
if (pathItems[i].stroked == true) {
with (pathItems[i].strokeColor) {
if (cyan == findColor.cyan && magenta == findColor.magenta && yellow == findColor.yellow && black == findColor.black) {
$.writeln('True');
cyan = replaceColor.cyan, magenta = replaceColor.magenta, yellow = replaceColor.yellow, black = replaceColor.black;
} else {
$.writeln('False');
//saveAs(filePath, saveOptions)

How do I delete my email address that is paired with my Droid and replace it with another email address? thanks!

How do I delete the email address that Veriozon Wireless rep paired with my Droid and replace it with a different address?

The easiest way would be to go to menu>settings>accounts & sync, select the account (I'm assuming you're referring to your gmail account, so select google), then press the remove account button at the bottom. You may lose all your contacts and other data associated with your google account, possibly even your apps, so be aware of this beforehand. You can then add the new account from the accounts & sync menu.
If you are willing to completely start over with your phone, another alternative would be to factory reset it (menu>settings>privacy>factory data reset). This will return your phone to an out-of-the-box condition, and you can use a different gmail address if you like.

How do you remove a person from a photo and replace her with another person

How do you remove a person from a photo and repalce her with another person.

There are many tool and "tricks" to accomplish this manipulation. However, depending on the image one technique might be more appropriate than an other. And then there is the question of how to do it "skillfully". For example, the shadows in the person that is being substituted might be different than in the original image creating the obviously "photoshopped" look.
Doing an Internet search on your posting title brings up lots of examples.

Questions on using a WRT110 on a network with another router

i dont know all the terminology for what im trying to do here so please bear with it and ill try to make it simple.
so i just got a wrt110 to replace a dlink i had that kept having the wireless go out on it.
the set up i had [and am trying to get back to] was like this:
an 8 port router going to a bunch of computers and into another room where it connected to a wireless router [WRT110] that in turn connected to a few other devices.
the set up i had before made it so that the main 8port router 192.168.0.1 would do dhcp and that passed through to the wireless router. that way everything was on the same 192.168.0.X network
what my problem now is that i dont know how to get the linksys WRT110 to passthrough the DHCP to things connected to it. so the 8port does DHCP and everything connected to that is 192.168.0.X but everything connected to WRt110 is 192.168.1.X so its like 2 seprate networks.
does anyone know what im trying to do is called? and anyone know how to do it?

Do this -
Connect a computer straight to the WRT110 Router, Open an Internet Explorer browser page on your wired computer(desktop) connected to the WRt110 Router...In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
On the main Setup page change the Router's IP Address/IP Address to 192.168.0.2(this address should be unique) and Disable the DHCP Server and click Save Settings, wait for 1 minute, unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...
Connect the WRT110 Router from Ethernet Port 1 to the 8 Port Router on it's Ethernet Port or LAN Port...
Now computer's connecting to the WRT110 Router will get the IP Address from the 8 Port Router in the Range of 192.168.0.x...

Just bought new time capsule- need help setting up WiFi network with another router

Here ismy situation.
I had a wireless network setup up at home using a Belkin wifi router.
I have 2 macBooks (1 pro, 1 air) and 2 iphones that connect wirelessly and a desktop PC that is hard wired to the ethernet port. In addition, I have a Verizon wireless network extender plugged in by ethernet. All of the hard-wired gear is in our 3rd floor attic office (and the wireless signal was strong throughout the house).
The Belkin wifi router was plugged into a wall ethernet jack that is in turn wired into a Linksys router in the basement (along with multiple other ethernet ports througout the house) and is hardwired to the Cable modem next to it. All of the hard-wired ethernet stuff (including the router in the basement) was there when we bought the house, and I have no clue in the tangle of wires how to sort them out (but don't really think I need to)
I just purchased a TimeCapsule to do wireless backups of my 2 macbooks, and tried to set it up alongside the existing wireless modem.
Needless to say, this did not work well. I called AppleCare, and was told that the TimeCapsule needs to be the "1st" wireless adapter, so I went into the basement, and connected the time capsule directly to the cable modem, and then out to the basement router. The Belkin router still needs to be in the attic to supply the PC and the Verizon adapter (so it is near a window for GPS signal).
If I try to name the WiFi network the same SSID on both the TC and the belkin router (to have dual signal strenth coverage) the whole thing gets messed up and the TC cannot be "found" by the aiprort Utility software.
What I have done now is that I have 2 side-by-side wireless networks with 2 unique names (actually 3, because I enabled the 5Ghz signal on the TC), but our wireless devices do not "switch" automatically from one SSID to another stronger signal SSID as we move through the house
Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal? I understand it involves switching the "channels" but don't know how to do it right now. Currently, everything works, so I don't want to mess it up tinkering. Another caveat- there are several other wireless networks from neighbors houses that I can "see". I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
Any advice would be appreciated.

Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal? I understand it involves switching the "channels" but don't know how to do it right now. Currently, everything works, so I don't want to mess it up tinkering. Another caveat- there are several other wireless networks from neighbors houses that I can "see". I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
Any advice would be appreciated.
OK.. sounds like a mess.. or at least messy and the previous people should have left a log book with all the IP address info in it.. you have far too many routers.. but from here it is impossible to tell how they are configured. Most are probably just setup as AP.
Naming rule for wireless.. Same SSID same security different channel.
SSID ie wireless name to work on the PC side should have no spaces and no special characters. TC name should also follow that rule. So the devices need to all set with fixed channels.
Don't worry too much about iStumbler and what is outside your house.. there isn't enough channels at 2.4ghz anyway. And you are going to need to use them all. There are only three non-overlapping channels. 1, 6, 11 so set each device to one of those channels. The TC should be as close as you can to where you normally use the MacBooks.. and turn on the 5ghz. You will have to leave it to automatic name so the Macbook can also roam across from 2.4 to 5ghz. But if you care to use a different name and force it onto 5ghz the speed is much better as long as you are in the same room.
Roaming is great in theory.. often in practice it just doesn't work.. you need to step in and turn off wireless and then turn it back on.. you can quickly see which router it is connecting to by hold down the option key when you click the airport fan in the top menu area.. and look at bssid.. you will have to figure out which number MAC address relates to which router.
Also do not be surprised if Lion gives you issues. It seems to often drop out and lose connection to the TC as a backup device even if internet is still working.

Cascade E3000 with another Router

I am trying to add the E3000 to my existing network to provide Wireless Connectivity for my users. The main router is a RouteFinder SOHO VPN (RF560). The RouteFinder acts as a gateway and provides DHCP. I do not want to change it's role or settings. When I added the E3000 using a Lan-to-Lan connection to the RouteFinder, all users lost access to the internet. As a quick fix as I was working on something else at the time, I just unplugged the E3000. Now I am reading through Article 3733 that I was originally referred to and that has me changing the settings on the RouteFinder which I do not want to do. Is there any way to accomplish adding this to my network without changing anything on the RouteFinder at all??? By the way...I am located in another state than this router and network. I can call and have someone plug and unplug stuff but all of the configuration has to be done remotely. Thank you in advance for your help.

If you connect the E3000 with its LAN port to your main router then you must disable the DHCP server on the E3000. You should also change the LAN IP address of the E3000 from the default 192.168.1.1 to a unused IP address inside your main LAN (e.g. if your main router is at 192.168.0.254/255.255.255.0 you could assign 192.168.0.253 or .1 similar)
I think the latest firmware of the E3000 may support internet connection type "bridge mode" which should be preferable in your case as you can use the internet port to connect to your main router.
Article ID 3733 doesn't say anywhere to change the IP address of the main router. You only change the LAN IP address of the second router.

Can Linksys router communicate/hookup with another router???

I am trying to set up a network for another computer. Question is, can I set up a d-link router (stand alone, no hookup to internet, use as a reciever for a notebook, connected to router with ethernet cable) connected with a ethernet cable? The notebook is not wireless and card cannot be used, that is why I need to use ethernet cable.
Hope this is not too confusing, but I want to hook up a notebook computer using a d-link router with ethernet cable, instead of a wireless card or internal wireless receiver in the notebook, ...........the internet comes in on a linksys wireless router and I want it to go wireless to the d-link router connected to the notebook with ethernet.
Can this be done???
Thanks in advance.

I'm kind of in the same boat. I was thinking that between the two routers, you would connect the two with an ethernet crossover cable vs. a normal ethernet cable. I just need verification that this could work. It's the same idea when connecting switches/hubs together. But, verification would be nice.
Ixnaydude

Cisco UC540 share LAN with another Router

Hi Guys,
Quick question....
Can a UC540 be used as generic device and not as a gateway on a LAN ?
I ask because we already have site to site hardware VPN with cisco RV series routers between 6 buildings and we dont wan to change it.
My idea was to have the following setup :
SITE A:
192.168.1.1      LAN     Router RC220 ---> Connetced to WAN
192.168.1.2      LAN    UC540 with nothing connected on WAN port and static route to 192.168.1.1
Is this a viable option/cheat ?
Like i said we do not want to change the RV routers/config for site to site and the fact that they are the default gateway....   and in this case i only have 1 public IP to perform the setup.
thx!

Lol... yeah it does feel unorthodox .
The reason is that we already have all the "networking/site to site vpn" setup between all our buildings 6 of them (all cable with 1 static IP).
Now one of the managers decided to buy a IP phone system to test it. It's a UC540 with 4 lines FXS/FXO.
We already have it setup the way i mentionned above... i didnt want to make it my primary gateway yet as we want to test it.
First my reseller wanted to plug the WAN port of the UC540 to my actual LAN but that felt even more unorthodox.....
Any way the unit is up, at IP 192.168.1.2/24 and has a static route of 0.0.0.0 0.0.0.0 to 192.168.1.1
Seems to work.... but for some reason i cant get it to do email notification for voicemail.    config seems legit, can ping to the internet OK. Option are enable... 24hours.... email is valid.... Even tried notification to my CELL and it doesnt work either....
The only thing is that i'm trying to use my ISP's SMTP server.... could this be the issue ??
and for the "advanced features on the UC540 outside interace" can i just use port forwarding on my WAN router to 192.168.1.2 or is there a technical limitation on the UC540 tha prevents that?
lol... so many questions... if the UC540 proves easy enough/reliable/versatile it might one day replace the RV220 that we currently use.
Thx for your time and sorry for the typos... tired like Hell
one last question : My reseller told me not to do config on this device (UC540) via CLI as it might void the support we can get from cisco... ever heard about this ???
I love CLI and used to work only with that on my old ASA/3500 Catalysts/1800 etc........
thx!

How do I unregister a serial number for LR and replace it with another one?

Hello
I got LR3 with my Leica M9. Now I sold my M9 and I'm waiting for the next Leica M to arrive in the next few months. Since LR is more or less part of the Leica-Software, I sold it with it and for the time, while I waiting for the next M, I bought a new LR-License.
Now I want to give the buyer of my camera the license number for the LR3, that came with the M9 and the LR4-update to it, so he can use it with the camera.
My problem is now, that I can not unregister the license-number in my Adobe-account for the old LR. How do I do that? After unregistering I want to install my new LR, that just arrived today and register it, but I'm afraid, that I have two registered LR4 versions then and can't give the solde one to the buyer of the camera.
Thanks for any help and best regards!

Excerpt from the Lr EULA:
4.4 No Transfer. YOU MAY NOT RENT, LEASE, SELL, SUBLICENSE, ASSIGN OR TRANSFER YOUR RIGHTS IN THE SOFTWARE, OR AUTHORIZE ANY PORTION OF THE SOFTWARE TO BE COPIED ONTO ANOTHER INDIVIDUAL OR LEGAL ENTITY'S COMPUTER EXCEPT AS MAY BE PERMITTED HEREIN. You may, however, transfer all your rights to use the Software to another individual or legal entity provided that: (a) you also transfer this agreement, (ii) the serial number(s), the Software and all other software or hardware bundled, packaged or pre-installed with the Software, including all copies, upgrades, updates and prior versions, and (iii) all copies of font software converted into other formats to such individual or entity; (b) you retain no upgrades, updates or copies, including backups and copies stored on a computer; and (c) the receiving party accepts the terms and conditions of this agreement and any other terms and conditions under which you purchased a valid license to the Software. NOTWITHSTANDING THE FOREGOING, YOU MAY NOT TRANSFER EDUCATION, PRE-RELEASE, OR NOT FOR RESALE COPIES OF THE SOFTWARE. Prior to a transfer Adobe may require that you and the receiving party confirm in writing your compliance with this agreement, provide Adobe with information about yourselves, and register as end-users of the Software. Allow 4-6 weeks to transfer. Please visit http://www.adobe.com/supportor contact Adobe's Customer Support Department for more information."
For full text of EULA see here: http://labs.adobe.com/technologies/eula/lightroom.html

Variable replacement path with another variable

Hi Guru's
I'd like to use the functionnality of replacement path from a variable.
Well, i have variable V_1 which is a basic manual entry variable based on a date infoobject. this variable is not mandatory and accessible.
And i have the variable V_2 which should be based on V_1 so i created V_2 with a process replacement path and in the replacement tab i put V_1 (i try with the list but i didn't find my V_1)
But the result is that V_2 is always empty but i have no problem when i check the query
So do you have any idea ?
Why i can not see the V_1 in the list of variable from the replacement ?
I don't want to use by exit. i know that it is possible but i want to use the main simple functionnality for flexibility is maintenance by users.
Thanks for help
Cyril

thanks for your answer,
svu123, my V_1 variable is of course in a correct status to be used. i made test in first without V_2.
And when i create V_2 in the first tab i activated correctly the replacement in processing type. if not i can not choose
the query or variable source and i can not see the list of variables.
Rakesh, i tried what you answered without results. i check different variables that are available in the list and i have
lots of different variables (all in ready for input) but i have interval, multiple single values, SAP standard variables my own variable on other fields.
any other ideas ?
many thanks
Cyril

Replacing HH2 with another router

Similar Messages

Maybe you are looking for