Replacing image and keeping existing action in Flash CS5.5
I'm updating an existing Flash swf file that was created using CS5.5. The only thing I have to do is replace the image used. When I import the new image it changes the action used with the existing image. How can I import the image I want to use AND keep the existing action that was used? My apologies if I'm using the wrong forum for this question. Thanks!
attach a screenshot that shows what you're doing when importing and describe the location of the code relative to the about to be replaced image.
Similar Messages
-
Replace timeline and keep existing chapter playlists
I have already authored my project and set up all the existing Chapter playlists on Time line A. however, i noticed a mistake and had to re edit the timeline as it has been imported from premiere as one continuous file. I wish to re import it as timeline B, with all the same chapter numbers and names and keep all the exisisting chapter playlists and links, but when i go to delete Timeline A it says that it will delete all existing Playlists. Is there any way around this? Please help otherwise i will have to set them ll up again!!
I think the problem is that the .avi file contains audio, and the .m2v is an elementary video stream.
Can you get an .avi of the replacement asset? Your other choice would be to mux the elementary audio and video streams into a single .mpg program stream.
I normally wouldn't recommend muxing the elementary streams. My choice would be to redo the timeline/playlists using the elementary streams no matter how long it took. -
Windows 8 and keeps asking to install Flash Player
I have Windows 8 and keep getting this message, "Please install the latest Flash Player" and i won't let me update?
When I attempt to update it says it is already installed embedded in IE
Windows 8. When i go to Windows update page it does not have Flash Player as
an update just Bing.
In a message dated 9/19/2013 12:48:58 A.M. Pacific Daylight Time,
[email protected] writes:
Re: Windows 8 and keeps asking to install Flash Player
created by Pat Willener (http://forums.adobe.com/people/pwillener) in
Installing Flash Player - View the full discussion
(http://forums.adobe.com/message/5695168#5695168) -
HOW DO I RENDER A STILL IMAGE AND KEEP QUALITY
I'm still in search of help with why High Res. still pictures lose quality when I render. The images are at 300dpi, roughly 1900x1200 (they vary in size). I input them fine. Then, when I go to put them on the timeline - I get a pop-up window asking me to "AutoFix" this clip? When I say "yes" it drops down the quality and it becomes grainy. If I say "no" the clip remains looking the same - great.
But - then when I go to "render" that clip, in the timeline - it drops down in quality and becomes grainy - AFTER I render it.
HOW DO I USE STILL IMAGES - AND KEEP THEM HIGH QUALITY WHEN I RENDER?
My Project Settings are; 1920/1080 --- 30fps DROP frame (should it be Non-Drop?) -- Capture is HDV and Video Rendering is only marked at "Optimize Stills"
I'm using Adobe Premiere Elements 11 on a Windows 8 PC
Any help would be greatly appreciated
thanksjoeyMPI
OK. Let us give this a try. If I go off course anywhere along the line, please let me know.
1. Open Premiere Elements 11 on Windows 8 64 bit to the Expert workspace.
A. Under Edit Menu/Preferences/General
Remove the check mark next to "Show all do not show again messages."
Set the "Timeline render quality (valid for HD projects)" = "High quality, Slow speed"
Leave a check mark next to Default Scale to Frame Size.
B. Right Click the Edit area monitor, select Magnification and make sure it is = "Fit".
C. Right Click the Edit area monitor, select Playback Quality and make sure it is = "Highest".
D. Setting the Project Preset Manually to Get the Sharpest End Product Photo Display
Go to File Menu/New/Project and Change Settings
In Change Settings, change the project preset to
NTSC
DSLR
1080p
DSLR [email protected]
Close out of there.
In the new project dialog that appears, make sure that you have a check mark next to
"Force Select Project Setting on this Project". Close out of there.
E. The project preset that has been selected has a 16:9 aspect ratio, and it will direct the program to set
up a 16:9 space in the Edit area monitor for editing. So, best results are expected with photos with a 16:9 aspect ratio.
If an imported photo does not fill the Edit area monitor space, you can try to scale it (zoom in) just to the point of
getting rid of any black borders. A quick scale can be done by clicking on the monitor screen, and dragging on a handle
of the photo's bounding box which has appeared.
But, now for the moment of truth..
a. You should not have seen any helpful Fix messages.
b. If you render the Timeline content by clicking on the render button above the Timeline
what you see should look the same or better before and after the render.
Also keep in mind, that having to scale up too much can create pixelation.
300ppi or dpi has no significance in video. Pixel dimensions are the focus. And here, video is 4:3 or 16:9 aspect ratio. In
this specific case 16:9. It would be a good idea to plan ahead on the sizing of the photos beforehand. As far as I know the perk of enhanced
sharpness in the end product is associated with just the one project preset that I pointed to in the workflow.
But, right now, our target is on the maintaining the quality of the photos in the Edit area. And, I realize that you realize
that no matter how great the resolution of the imports, the imports will be reduced to the sizing characteristic of the export
preset.
We will be watching for your results. Thank you for considering the suggestions.
ATR -
I loaded music on my nano with my old laptop. now using a new laptop and want to load music on my nano but it wants to delete all song. How can I load new music frmo new laptop onto my nano and keep existing songs?
Import the music on the external HD into iTunes. If you don't want iTunes to make a new copy of each track that is stored in your iTunes Media folder on your PC's internal HD, make sure the Copy files to iTunes Media folder when adding to library option is NOT ticked from under the Advanced tab of iTunes Preferences. Just remember that if you go this route, you'll always need to have your external HD plugged in before you start up iTunes.
B-rock -
Replace footage and keep grading in place?
Hi all
I'm working on a production with a less than ideal post work flow. Its a tv show with lots of fx shots and I'm being delivered the project in chunks. So I'm doing scene change detects and obvioulsy working without an EDL. So I had to do the first session with some shots being incomplete. Now I have a revised "chunk", same length, etc, but with finished FX shots. I'm trying to figure out if there is a proper way to just replace the clip. It has the same scene changes, so I was goign to try and trick speedgrade by replacing the source footage with the new one and naming the file the same way, but it seems there must be a better way. Is there?
Thanks for your time.Hi,
You can replace the existing clip with drag&drop:
- Open reels browser (Timeline-Reels)
- Browse to new clip
- Drag&Drop new clip onto clip in reels browser
This should replace the source clip and keep SCD settings.
Hope this helps.
Dennis -
Internal links in portal (CSS, images, and other struts actions)
Good morning gurus! I have another question regarding Struts Portlets. We have an application that builds a page with an image that comes from the database. The application is composed of two Struts actions. One that's in charge of drawing the page and the other action is in charge of bringing the image from the database. The second action is called from a JSP (img src="/getImage.do"). In portal, once the portlet rendered the JSP it doesn't recongnize the other links inside the JSP (the call to the second action). Also, other links suchs as images, CSS, and others Struts actions are not recognized. How can I access images, links, and CSS from the main application (the actual application).
Best regards,
Marcelo Oliva
Message was edited by:
molivas08Hi Andrew -
This is a pretty big topic for one thread ... I will try to provide some pointers on where to look for more information.
1. Need ability for non-html literate authors to update text, images and links on their portion of a shared web page
In the following whitepaper, see the section: Associated Funtion for Item Display
http://www.oracle.com/technology/products/ias/portal/pdf/oow_10gr2_1336_fender.pdf
This will allow you to prompt your non-HTML literate users for the "parts" to display and you worry about the UI.
2. Need ability to enforce common look and feel on content provided by non-html literate authors.
Create pages based on Templates. Templates can force the style on users. Again - do not use text items and the RTE for users, you control the display with an Associated Function.
3. Prefer ability to approve content before it goes live.
Grant content contributors "Manage with Approval" access
5. Need advanced search capabilities
Check out the search section on Portal OTN
http://www.oracle.com/technology/products/ias/portal/content_management_10gr2.html
Hope this helps,
Candace -
How can I transfer images and keep their filenames
When I sync the images between my macbook and ipad it renames the images to IMG001...How can I transfer the images onto the iPad and keep their original filenames?
Use a different app to manage your photos. Photo Manager Pro will keep your files names.
-
Upload Images and giving an action to image
Hi,
I want to upload images and by clicking that image it must go to next view.
Could you please suggest me some of the steps to upload image and to make an action on image.
Regards,
AnithaYou can use FileUplod UI Element for uploading your photo.
and to make image as action you can use LinkToAction UI Element and put the full image name(with file Ext) in ImageSource property of LinkToAction UI Element, after that create a action and put the required code for next level of prcessing
use this running code for uploding you file
String FileName = "temp;
InputStream input = null;
int i=0;
FileIncreament();
try {
String directory =".\\temp\\webdynpro\\web\\local\\yh1245_ftp"+
"\\Components\\com.yash.yh1245.Upload\\"+FileName+wdContext.currentContextElement().getCounter();
boolean sucsss = new File(directory).mkdir();
if(sucsss){
wdComponentAPI.getMessageManager().reportSuccess("Directory Created ");
File file = new File(directory+"\\"+wdContext.currentContextElement().getResourceURL().getResourceName().toString());
FileOutputStream fos = new FileOutputStream(file);
wdComponentAPI.getMessageManager().reportSuccess(file.getAbsolutePath());
FilePath = file.getAbsolutePath();
wdComponentAPI.getMessageManager().reportSuccess("AbsolutePath......."+file.getAbsolutePath());
if(wdContext.currentContextElement().getResourceURL()!=null){
input = wdContext.currentContextElement().getResourceURL().read(false);
//wdComponentAPI.getMessageManager().reportSuccess("Resource is not null ");
while((i = input.read())!=-1){
fos.write(i);
fos.flush();
fos.close();
wdComponentAPI.getMessageManager().reportSuccess("File Uploaded on server directory "); -
Changing Branding Image and Keeping Our own Image
Hi All,
how can we change the portal log on page that is branding image and as well as branding logo...
i want step by step procedure for this.
Thanks,
Sriram.Hi,
Find some more links:
How to change branding image of Portal?
Portal Customizations Intro - Login Part 1
Change of Logon Page
Modifying The Logon Par(or customising the Logon Screen)
http://help.sap.com/saphelp_nw70/helpdata/en/23/c0e240beb0702ae10000000a155106/frameset.htm
Re: change the branding image of Portal
How to change branding image of Portal? -
Embedding and using external fonts in Flash CS5
I just upgraded to Flash CS5. Font embedding is entirely different than it was in CS4. I've been looking for examples online but none seem to show me a solution that matches what I need.
In the project I'm working on, code changes the font a text box uses based on region and language. To keep file size down I created separate swf files with the fonts embedded. That way I only download the font I need. The way I did this and the code I used in CS4 doesn't seem to work anymore. Can someone please point me to a tutorial on this.
ThanksOK, maybe you can help me figure out what I'm doing wrong. Below is the code I'm using.
LOADING THE FONT
Font SWFs:
I'm trying something new with CS5. To create a swf with the font I need I'm creating a library symbol of the font with all the characters in it. Titled it "Verdana". I've also turned on Export for ActionScript and given the font a unique class name (VerdanaFont). Then of course publish the swf, name it Verdana.swf, and put it in the correct location. Does doing it this way automatically register the font?
The Loader code:
private function LoadFont()
var fontPath:String = "assets/fonts/Verdana.swf";
var fontLoader:Loader = new Loader();
fontLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, createTextBox);
fontLoader.load(new URLRequest(fontPath));
The TextBox code:
private function createTextBox()
var tf:TextFormat = new TextFormat;
tf.font = "Verdana";
tf.align = "left";
var textBox:TextField = new TextField;
textBox.embedFonts = true;
textBox.selectable = false;
textBox.htmlText = "This is test text";
textBox.setTextFormat(tf);
stage.addChild(textBox); -
Best way to archive RAW Images and keep JPG?
Hello everyone,
I have what I believe to be a fairly simple question. My iPhoto library, comprised mainly of RAW images, is taking up a majority of my MacBook's 500GB storage capacity, and I want to fix this. I want to keep all the photos in my library accessible on my mac, but they do not necessarily need to be in RAW format.
My thought:
1) Archive my entire iPhoto library in original format (RAW) to an external hard drive
2) Convert the MacBook's iPhoto library to JPG format, freeing up a considerable amount of space on my hard drive
My only concern is the safety of my original (RAW) library. The last thing I want to do is lose those minimally processed images. Is it safe/possible to export an entire library to an external hard drive? If I do that, will I be able to hook up that hard drive and view the images under iPhoto? Is there a simple way to convert an entire library to JPG? Is there a better way to accomplish my goal of freeing space?
Thanks in advance for any advice/help y'all can provide.
Best,
StevenYou won't be be "exporting" a library, just moving it:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
That's the Library with the Raws moved.
3. To view that Library: Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library'
There is no way to "convert" a library. The best you can do is export the images from the Library as Jpegs to folders in the Finder. Trash the Library. Make a new one. Then import the images from the folders. A lot of work, and a job that will need to be repeated as you add images.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.
It might be time to upgrade to Aperture.
With Aperture you can have your Library on the internal disk but store the Raws on the External. You'll still be able to view and share your images without the external connected if you choose to generate previews. While this is theoretically possible with iPhoto, it lacks the tools to manage the referenced images properly.
Regards
TD -
most important issues i am having are the following are as follows:
1) on www.alliedelec.com the main image in the flash rotating banner is skued from being enlarged.
2)http://www.alliedelec.com/eaton-control-automation/ on the bottom of the page there is a flash video player which is missing the controlbar at the bottom and cutting off the video previews on the side due to the flash oject being enlarged.
i have checked this in older versions of firefox and other browsers and ff5 is the only browser which is having an issue and one in need fixed asap.
Please Help!!!!No problems here on Linux with the Flash objects on both pages.<br />
I see the control bar.
Make sure that you aren't zooming anything on that page. -
I think I messed up. How to uninstall iLife disc and keep existing iPhoto.
Ok. I was reading some other answers but didn't see this one. After upgrading to Mavericks 10.9.5, I began having problems with editing in iPhoto.
And upon opening iPhoto, it would take forever. Usually I just minimize it in the dock. So, if I do too much editing to my photos, they come out half overexposed and half normal. No rhyme or reason. No particular photos. Just random. Only if I do a lot of editing. I have to revert the photos and only do a little editing. Annoying. Spoke with Apple support for 2 hours. we tried everything he could think of. Nothing fixed it. He thought it might be a glitch in the software so he sent me a new iLife disc. Now when I bought this iMac in 2009, it already had iPhoto on it. No disc for that particular application. So the disc he sent me was the bundled version iLife '11 for version 10.6 or later. Now here's where I think I messed up. I didn't delete my existing iPhoto before I clicked and installed the new disc. (My icon is the orange palm tree BTW) so after install was complete, I clicked on it and it and the icon got a white circle with a line through it and a pop up that read, " Please run software update to install it now. it offers two buttons to click...."Software Update" and "OK". When I click on the software update, it takes me to the Yosemite upgrade feature (which I don't want). What did I do?? iPhoto won't open at all. Now I just want to forget this disc and go back to my screwed up iPhoto version. Help???Nevermind. Fixed the issue. Had to go back and install the earlier versions.
-
Conversion of ad20 non raid to a D20 raid 1 and keeping existing OS/data
I have a new D20 with windows 7-x64 pre installed on it. I purchased a second Lenovo supplied sata add in drive to convert the system to raid 1.
When I add the “raid 1” in support in the bios, the system when it reboots does not recognize the existing windows 7 partition.
When I used “other mfg” on board raid configuration, the working partition was considered the master partition and was automatically mirrored to the new added drive (making it raid1)
My expectation was that there would be either a “thinkvantage” tool that allowed you to do this from the OS, or there would be a some OS add on tool that performs this function
So my question.. Can you convert a d20 non raid to a D20 raid 1 (given drives are the same etc), and if so (I am a glass half full person), what is the process required to do so.
thanks
matt k.if the marvell RAID controller hasn't been enabled, you'll need to install the driver. it can be found here: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73697
after this is installed, boot into the D20 BIOS and enable RAID. reboot again into the unconfigured drive and see if you can get into windows. if so, you can set up your RAID 1 array.
if you want to control RAID configuration from within windows, you'll need to install the marvell RAID utility found here: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73073
(edit: typo)
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600
Maybe you are looking for
-
ERROR : SSO Partner application could not be registered successfully
Hi, when i run txkrun.pl to register sso my regisitration fails perl txkrun.pl -script=SetSSOReg You are registering ORACLE HOME, Instance with SSO and OID Servers. Enter the host name where Oracle iAS Infrastructure database is installed ? hschbscgn
-
How do I back-up ALL of my Contacts, Texts, Photos, Apps and Music???
-
How to check in a dead ipad in apple configurator
Im using apple configurator to supervise a fleet of Ipads, one has unfortunately died and I cannot seem to work out how I can check in the failed ipad so I can check out a replacement to the end usetr who was assigned the failed ipad.
-
I was trying to delete a file but must have had the folder highlighted instead and deleted it instead. Please help.
-
Set time, besides date, to an event
Hello, I'm wondering if it is possible to set time, besides date, to an event. Exemple: Event name XPTO, 18th June, 9.00 a.m. to 11.00 a.m. Can we do that? Thank you. Best regards, Andreia