Replacing of the pricing procedure by a different pricing procedure .

Hi
We are process of changing the pricing procedure of the particular sales process.
In case of old open sales order after changing pricing procedure if i update it in VA02 mode then also ...it is not picking the current sales order ...
Again in case of sales order where deivery has been done ...for them while creating billing ...it is taking current pricing procedure so that there is a mismatch of sales order amount and billing amount .
Again while creating return order w r t old sales order ...it is taking current pricing procedure in return order instead of taking the original one ....
Pls advice how to rectify this problem .
Thanks in Advance
Regards
Mrinal

Dear Lakshmipati,
I told I am in process of changing pricing procedure .
Currently normal pricing procedure is configured in the system. Now business wants to change it in list price pricing procedure ( i.e base price with tax pricing procedure ) . And new pricing procedure has some extra automatic discount value also .
My question was
1) There is no change in open sales order ....IT is OK
2) But for sales order where already delivery has been done then after changing pricing procedure it is taking new pricing procedure so that ..sales value and billing amounts are getting different . How to restrict this .?
3)For return order also ...it is taking new pricing procedure ... How to restrict the same ?
Regards
MKC

Similar Messages

I wrote a assignment in the microsoft word 97-2003 doc but by mistake replace in the same name but with different thing . how can i retain my orinal file which was as Basel III and Banking law

i wrote a assignment of almost 2500 words in the microsoft word 97-2003 doc but by mistake replace a table only in same name . how can i retain my orinal file which was as Basel III and Banking law

Hey Christian
Thanks I havn't seen that post, busy trying it now but no luck so far.
I defined it in the second one (Content Management - Utilities - MIME Types).
Tried it now in NWA, no luck either . . .
What I noticed is no matted what it is defined as in NWA or Content Management, the properties of the mht file still shows Binary File (application/octet-stream)
Any ideas?
Regards
Antonette

Selling price in the Pricing procedure

In my implementation the company is arriving at the selling price like this:-
Basic GLP Price     100
Freight & Insurance @5%      5.00
Sub Total      105.00
Exchange to INR @ 1Euro=Rs.1.00(For ex.) 105.00
Loading 1%      1.05
***. Value      106.05
Basic Customs Duty at 15 %      15.91
Sub Total      121.96
CVD 16%      19.51
Cess on CVD 2 %      0.39
Sub Total      141.86
Total Duty      35.81
Cess on Total Duty 2%      0.72
Clearing Charges 1%      1.42
TOTAL COST ( CIF + C DUTY+ CVD+ CESS +CL CHRG)      142.95
Sub Total cost without CVD      <b><u>123.04(Selling price)</u></b>
I want this selling price to be picked up once I punch in the material part no. in my sales order. Can I get this selling price directly without using the pricing procedure? Can I hardcode the selling price or can i use some selling price simulation? Since the data to arrive at the selling price is dynamic is it advisable to hardcode the SP or to use different condition types to arrive at this selling price?

Hi Arindam,
It is advisable to create a new condition type so that in future it will be useful for the reporting purposes related to sales order documents.
Othewise you can write a exit ( Requirement/ Formula etc ), and do the calculation part for the selling price what you have mentioned in any of the mandatory condition type which you are using in sales orders, so that selling price value will always get populated.
Thanks
Lakshman

Step number in the pricing procedure

Hi experts,
Pls advise the reasons. How to solve them without changing the step number?
Q1: As long as HM00 is the first step number in the pricing procedure, the value of HM00 cannot be distributed among items.
Example:
Pricing procedure:
step no.         conditon type
10                      HM00 (statistical)
30                      NETW (ERL)
Sales order (HM00 = $100):
item 1     NETW = 0
item 2     NETW = $100
Q2: When putting a conditon type between PR00 & subtotal in the pricing procedure, such as VPRS, the value of subtotal cannot be the same as PR00.
Example of sales order:
PR00 (unit price) = $19.95 per 10kg
VPRS (internal price) = $10 per 1kg
subtotal = $2 per 1kg
Request: PR00 = subtotal = $19.95 per 10kg

hello, cathy.
i do not have access to my references now, but please allow me to advance a general concept.
in SAP standard, HM00 is a group condition, and fixed value. the distribution of this value is controlled by certain logic. as in other header condition types, distribution of this amount can be based on either the value or quantity contribution of the different sales order items.
what serves as the basis for distribution of HM00, i do not recall but i will get back to you on this... or perhaps another consultant can give it sooner.
as to your second issue, i will try to understand your situation better. but generally VPRS is statitical and not meant to come between PR00 and the sub-total. VPRS has a different logic compared to the other condition types, and is intended to return a statistical presentation of profit margin in the condition tabs. if fact, in pricing procedure RVAA01 you will notice that VPRS is grouped with the other statistical condition types just before the profit margin.
regards.

Subtraction in the pricing procedure.

Hello Friends,
I have requirement as follows:
I have two steps in the pricing procedure. One has a condition type and the other does not. Now my requirement is to subtract the condition price of step 1 from the condition price of step 2 and display it as the condition price for step 3 which has no condition type.
I have been suggested to create a new routine in vofm and assign that in the pricing procedure.
Is there any otherv way of doing this?
If not, how we design the code to get the values from the structure KOMV for the field KWERT for different steps to calculate and update in the rpicing procedure?
Can u please guide me.

and display it as the condition price for step 3 which has no condition type
In SD, unless you have a condition type, you cannot show it as a pricing since it has an impact in FI via Account Key and G/L Account assignments. Please explain more about the Business Process and how you want to capture. Dont go for VOFM and all when the process can be configured via standard.
G. Lakshmipathi

I followed the same procedure of reverse calculation from MRP pricing calcu

hi,
sap gurus,
i followed the same procedure of mrp calculation but
MRP Pricing Procedure:
Go through the following:
I will brief your requirement in short
MRP = 1012.5/-
VAT = (1012.5/1.125) = 900/-
so price before discount will be = 900/-
discount given at the rate of 10% = 100/-
Initial Price = 1000/-.
1. Create condition types as below:
ZR00 for price
Condition class = B
Calculation type = C
Plus/minus = A
ZSET for settlement (to knock off the effect of ZR00)
Condition class = A
Calculation type = C
Plus/minus = X
ZWST for tax
Condition class = A
Calculation type = H
Condition category = D
Plus/minus = X
Z007 for discount
Condition class = A
Calculation type = H
Plus/minus = A
ZDUM for net price
Condition class = A
Calculation type = A
Plus/minus = A
YWST for tax (to knock of the previous effect - to be used for posting to G/L)
Condition class = A
Calculation type = A
Plus/minus = X
YOO7 for discount (to knock of the previous effect - to be used for posting to G/L)
Condition class = A
Calculation type = A
Plus/minus = X
2. The following will be the pricing procedure configuration:
Step......No........Cond Type........... From.........to..........Man.........Req........Sta................Acc Key
10........0..............ZR00..................--..........--..........-...........-........---.................ZDU
20........0..............ZWST..................10............19...........----.............X............X...................
30........0.............text.......................10...........29...........---...........----.........X
40........0.............Z007.....................30...........39...........-----.............X............X
50........0..............text.....................30............49...........---...........-----.........X
60........0............ZSET.....................10...........19...........----............X............--.................ZDU
70........0............ZDUM....................50...........59...........----............X............---...............ERL
80........0............Y007.....................40...........49...........----.............X...........---...............ERS
90.......0..............YWST..................20...........29...........-----............X...........---................ZWS
ZDU - dummy account key for posting extra not required items.
ERL - account key for price
ERS - account key for discount
ZWS - account key for tax.
3. Condition records in VK11
Condition type----
Condition record.......
ZR00........................................1012.5.....................INR will be positive (1012.50 +)
ZSET.......................................100%...............................will be negative (100 -)
ZWST.......................................10%................................will be negative (10% -)
Z007.........................................12.5%.............................will be positive (12.50 +)
ZDUM.......................................100%..............................will be positive (100% +)
Y007.........................................100%.............................will be negative (100% -)
YWST.......................................100%.............................will be negative (100% -)
Condition records for Z007 & ZWST will be decided as per the conversion required. You will first have to manually calculate the amount for the condition type.
4. I create a sales order for single quantity for an item & the pricing will be as under:
ZR00 = 1012.5 (dummy account) - positive
ZSET = 1012.5- (dummy account) - negative will knock off effect of ZR00
ZWST = 112.5- (negative & no posting)
Z007 = 100 (positive & no posting)
ZDUM = 1012.5 (positive & posting)
Y007 = 100-(negative & posting)
YWST = 112.5 (positive & posting)
but its not throwing any condition records for ZWST and YWST
can any body help me
plz
regrds,
balaji.t

HI,
Plz try Routin for Vat formula.
i am worked on MRP pricing but in our case formula is different.
eg.: If i want to calculate VAT for B=1000 Rs. it is like
A=1000 * ((100/100 + (12.5- VAT 5)))
= 889
VAT (Value) = B - A = 1000-889 = 111 which is passed to GL account.
For that we developed one Routine with the help of ABAP and assign to Pricing Procedure.
Regards,
PM

To make the Pricing Condition types inactive in Pricing Procedure

Hi Experts,
I am facing a senario where, in a sales order, pricing procedure, if one of the pricing condition type does not exist, then two other condition types (even though they are determined by condition records), should be either made inactive or should not appear in the pricing procedure.
Example: If I have 3 condition types in Pricing Proc say
YYY1, YYY2, YYY3, then the scenarios are
a. If one of the condition types YYY1 is not determined, then, YYY2 and YYY3 should not be either determined in the sales order or should be made inactive. This same logic applies to both YYY2 and YYY3.
b. If all three condition types are determined in Pricing Proc of the sales order, then, the price should be considered.
If it was just YYY1 then, I could have done it in VOFM by writing a routine and assigning it to YYY2 and YYY3 in pricing proc. However, the scenario is to check the other condition types as well and make YYY1 inactive if any of the other condition type does not exist. Both condition types are determined after YYY1 which is another difficulty.
I tried creating a dummy condition type and assigning it to Pricing Proc (at the end of Pricing Proc). For this dummy condition I put in a pricing requirement which checks for all three condition types and if one does not exist, then it make other conitions inactive.
However, this does not work in VA02 and VA03 as XKOMV is either not getting filled up or even if is getting filled, it is not having the condition type. It some times has condition records, and sometimes not... (not very sure why)
So, I was thinking of using user exit for the same. However, I was unable to find a suitable user exit for the same where KONV table can be read or XKOMV can be filled.
Can you please suggest if any user exit can be used for this or if we can implement it in a different way?
Regards,
Mukund S

Hi,
I think you can use condition exclusion functionality to select best pricing condition from a set of conditions in pricing. You can compare conditions in many ways.
I believe you can plot a solution with little research. The below link is for your reference.
[http://help.sap.com/saphelp_40b/helpdata/fr/93/743483546011d1a7020000e829fd11/content.htm]

Invoice pricing procedure not using alt calc type from the pricing procedur

The sales order has the same pricing procedure as the invoice but when the invoice is created it is not using the alt calc type that is on the pricing procured like it is on the sales order. This is causing one of the condition types to have different values on the sales order vs. invoice.
I am not sure what other areas to check to see why this is happening. Any thoughts?

I have checked and in the copy controls for Delv type = LF and target Bill type = F2 the Pricing Type = G (copy pricing elements unchanged and redetermine taxes). Condition types such as ZPR2 where there is condition record copy in correctly to the invoice. It is condition type ZZIF where it is determined from a routine, not a condition record, where I am having this issue.
Is there another place in config that I should be making a setting so that condition types determined by routines are copied to the invoice without being redetermined at invoice create?

About the pricing procedure of purchasing order

Hello friends,
can anyone tell me about the pricing procedure,conditions & texation of Purchase order?
and hoew to maintain all those term in Customisation?

The Basic thing is Condition Technique. In which there are
1. Access Sequence 2. Condition Record 3. Condition Type 4. Condition Table.
A Access Sequence access a Condition Record of a Condition Type in a Condition Table is a Condition Technique.This is a simple logic
Here the Condition Type is very important like PB00, PBXX,RA01 etc.
In the background every Condition Type has its own defition means the purpose of the Condition Type like, is it for Pricing or Percentage, Quntity base, Accrual Feilds etc is to be defined to work this functions. Normally we use the existing ones without any risk. But some cases, we have to Create a New Condition Types as per the organisation requirement.
The Pricing Schema is useful to minimise condition types while mention prices for Vendor on the basis of Pricing Schema which we defined according to organisation requirement.
The Pricing Schema means the calculations procedure of Condition Type.
Ex. RA01 - Discoount % is caclulated on PB00 - Gross Price means
RA01 is based on PB00 like that we have to define in the Pricing Schema
which makes easy to use in real time.
Here PB00 has the Access Sequence - 0002.
But RA01 does not have the Access Sequence.Why because it is a dependent on PB00. But both are Condition Types.
In the system, by default some standard Scheme will be there at Vendor Schema Group in the Vendor Master Screen means the standard one is assigned which is very lengthy which may fullfil our requirement. But some cases which may not fullfil our requirement, in such we have to define.
For the configuration, I may not able to explain properly through here but will give some idea.
Configuration: SPRO - IMG - Material Management - Purchasing - Conditions - Define Price Deternmination Process:
1. Define Access Sequence
2. Define Condition Type
3. Defince Calculation Schema:- Here you have to define the Schema - Define Schema group
1. Define Schema Group vendor
2. Define Pricing Schema group
3. Schema group for Purchase Organisation
4. Assign Schema group to Purchase Organisation - Define Schema determination
1.define calculation schema for Standard purchase organisation
After completion of the Schema Group, we have to assign it to Vendors.
Then whenever we use any transaction with this Vendor, the concerned Schema will work as configured by us.
The Pricing in MM is vast because each Condition have its own importance and each Access Sequence have its own importance. So you need not bother about this. First you learn how to define the Calculation Schema through the above.

How to hide the pricing conditions specified in pricing procedure of sd.

dear friends,
my situation is to hide the conditions specified in the pricing procedure. so that it is not viewed by the some users.can you please tell me how to hide the conditions. so some of the persons, who are having authorization to see the conditions , will be able to see the pricing conditions.
can you please suggest me how to do this.
regards,
g.v.shivakkumar

Authorisation issues viz. Role Impementations
Hide Condition Records Line Item & Header Wise from all the transactions QK / So / P.I. / Enquiry / Invoice etc. for specific user grps. - in CRETATE / AMEND / DISPLAY / REPORTS all
Only Display the fields
regards,
g.v.shivakkumar

Excise duty in the Pricing Procedure for Local Purchase / Importation

Hi,
I'd like to know how to set up the pricing procedure for the purchase of an IS Oil Material; for local purchase and importation, especially with regards to the excise duty posting.
Local purchase: the vendor will bill us inclusive of the ED tax he previously paid, so the tax is just passed on to us.. My receiving location has ED paid status. In the PO item, we need to see this price (inclusive of tax) in the net price field.
Importation: the vendor only bills us the cost of the material. When we received the fuel, we paid ED tax to local tax authorities.
I know that both in these scenarios, the system has to determine the excise duty.
My questions are (1) how do you set up the excise duty condition type in the pricing procedure(or do they have to be maintained in the pricing procedure?) ? and (2) how do you set up this condition type in the config?
Thank you and hoping for your immediate feedback.
zccr

Hi,
You can use same pricing procedure
put 4 in subtotal in pricing procedure against the Discounr or freight cond
and in taxinn
BASb ALTCBV 362 and for jmop 363
But this will work only if same discount or freight value is in IV as that given in PO
if freing value changes in IV then its a problem
This is SAP bug, and SAP workes in that way only, freight value should be same in PO and IV
other solution
in taxinn create tax code like v8 vat 4% for 003 tax clasification
in ftxp create tax code V8 desc vat 4%
in fv11 for jvrd put 4
and at the time of IV put this tax code for freight amount
and for regular material value V1 tax code
this will work only if u have used acess seq MWST instead of JTAX pr JST1
hope this helps
Vipin

How to run the same procedure in parallel for different parameter value.

Hi There,
I am currently working on extracting data in to flat file and I am able to do so for one revenue month (e.g. 200101) using PL/SQL procedure(get_rev_data). it takes almost 1 hour to execute the procedure completely and it generates 400 MB data file. Now I have to run this procedure for last 10 yrs of data (i.e. 120 revenue months) . my prolem here is to figure out a way/logic in such a way that I can run the procedure in parallel for each revenue month and at the same time it will write the data in respective data file for each revenue month. so the final result of this exercise would be 120 flat files, one for each revenue month with file names like
EXTRACT_00001001 to EXTRACT_00001120.
where
first five digits : 00001 will indicate the Extract run number and
last three digits : 001 will indicate the thread number for each run.
I am thinking of doing this by creating a table "RevMonth" with two values (revenue_month, thread_num) and calling the procedure in a simple select statement and passing revenue_month as parameter of the procedure like
SELECT get_rev_data(revenue_month, thread_num)
FROM REVMONTH;
But I am not sure if that will do the needful. Any idea on how to achieve this will be of great help. Thank you.

Hi Smit,
Thanks for the advise. I am not planning to run for all 120 months at once. actually I am planning to run like 1 year (12 revenue months at a time). I am not sure if that will work well but I was planning to run this through shell script (Unix) and will call the same procedure with different parameter (revenue_month and Thread_number) values and see what happens. I hope that will run in parallel for each revenue month.
Let me know if you have more knowledge about it. THanks a lot.
Thanks,
.

The pricing procedure in Sales order is not getting copied into invoice

The pricing procedure in Sales order is not getting copied into invoice.
I have created a document type (pricing procedure),based on the document type ,pricing procedure determination is done.
So while creating sales order the pricing procedure is determined but when invoice is created the pricing doesnt refelect in the invoice.How to over come this problem

Hi
Please check the in OVKK, weather you have maintained correctly or not.Also check in the Billing document type details what is the Document pricing procedure that has been maintained.
Regards
Srinath

Rebate fixed amount condition in the pricing procedure

Hi SD Gurus,
i'm using rebate fixed amount conditions (Lum sum).
The situation from a business point o f view is the following: i pay the customer 1000$ once he made something.
This kind of condition is not relevant for accruals since they have to be built manually (manual accrual). As a consequence i'm note sure if this condition shoul be put in the pricing procedure used for invoices. In the other and for sure this condition should be inserted in the pricing procedure for manual accrual/credit note.
What is your point of view!!
Thanks
C

if you are going to use Rebate, then there is no need to add condition type in standard pricing procedure, if you have designed your pricing procedure, include condition types for rebates as in standard pricing procedure.
This condition type is linked to Rebate type.
I think you first try the scenario in IDES and then do the same settings as per yoru requirement.
If you want step-by-step procedure for rebates will help you
Please refere the thread
rebate documentation
Regards
Jitesh

Object Class Invalid when downloading the pricing procedure from ECC to CRM

Hi,
I want to download the pricing procedure for that I have created the ZDNL_CUST_CND which contains only the following tablesT683, T683S, T683T and T683U.
When I check in R3AM1 status is Red.
The following Error have been found in SLG1
     Object class invalid
     Error in inbound data check
Message no. CND_MAP120
Diagnosis
During the receiving inspection, serious errors were found in the consistency of the exchange object.
System Response
Data exchange is terminated
     Data exchange terminated
Message no. CND_MAP122
Diagnosis
Data exchange has been terminated due to serious errors. No exchanged data has been posted in the system.
The following Error has been found in SMQ1
     R3AD_CONDITIONS     STOP
Details of STOP
Set by Host name: litldq; Transaction: ; Report: SAPMSSY1
I have checked the connection, everything is perfect.
What may be the problem?
Thanks

Hi,
Please try to re-generate the adapter object (ZDNL_CUST_CND) services using trx.
SMOGGEN
. After this, try re-running the load.
I assume that your CRM inbound mapping module are correctly coded. If the problem persists, try de-registering the R3AD_CONDITIONS inbound queue using trx.
SMQR
and then debugging the inbound queue from the same trx. after re-starting the load.
Reward if this helps!
Regards,
Sudipta.

Replacing of the pricing procedure by a different pricing procedure .

Similar Messages

Maybe you are looking for