Replacing Oki Data Dot Matrix with HP Laser printer

Does anyone know of a driver that would support dot matrix printing?

Please provide some additional details. Are you looking for a printer driver that would accept Okidata format and print it on a laser printer because you have a legacy application that only supported this format?  What operating system are you using?
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • Replacing Dot Matrix Printer with a Laser Printer

    I'm hoping to replace a dot matrix printer currently used to produce a 2 layer carbon copy form with a laser printer.  The source of the form is SAP. The length of the form varies between 1 and 3 pages. Does HP have a printer/paper solution?

    See this - https://support.mozilla.org/en-US/kb/how-print-websites

  • Data of matrix(with userdatasource columns) dissapear in  form_add mode

    Hi all,
    Why when i put the mode of my userform in ADD_mode the data of my matrix (with userdatasource data in columns,not linked to one table) disapear?.
    How i can do to not lost data? Exist any way?
    Thank you all again.
    Regards.

    Aitor,
    I guess you are using UDO, and set it  the ObjectType to form.
    It is a default behavior that B1 will clear the form for new entry, when it switchs to add mode.
    Would you specify the scenario more? Why would you like to keep the data in the form from Find / OK to Add mode?
    Kind Regards
    -Yatsea

  • Distorted printing to dot matrix epson LX-300 printer

    the problem im having is the same as the one mentioned here:
    http://social.technet.microsoft.com/Forums/windows/en-US/ab12901e-4b1e-4a25-bdb6-25c2c4f576e8/ie8-dot-matrix-printing-issues?forum=itproxpsp
    the basic problem is that when i print from a computer to an epson LX300 printer using firefox the spacing between letters seems distorted. you can find the image of the problem on the link above.
    the only difference is that they are talking about using IE 8 while im using firefox 26. the user Joel-MMCC made the best explanation of the problem except that firefox is not running on trident. but it seems to be exhibiting the same problem at random. i have about 10 computers on my network but only 2 are having this problem. and i could not for the life of me figure out why.
    when i tried the work around of changing the print resolution from the default 120x72 to 120x144 it seems to fix the problem except that the printout fonts and letters are now too far spaced. and since our webapp is already optimised to print on the 120x72 resolution and because we have fixed continuous forms that we print to, this work around will not work for me.
    i tried installing IE9 on the troubled computer and it seems to work. the only problem is our webapp is optimised for firefox. certain javascripts dont work on IE.
    im really at the end of my wits here. any ideas?

    well, i have this same problem too. my only solution is to not install most driver.
    @akinga: i agree, i thing it's somehow related to vga driver, and it seems only affect the new intel's. the old ones work just fine with all driver installed.

  • Dot matrix printers Capable of printing TABLE lines In Smartforms

    Hey guys,
       we are using EPSON LX-300+ (dot matrix pritner)
    but the problem is,
    it is not able to print table lines present in a SMARTFORM..
    it can print the same table lines presnet in SCRIPT ...
    so i want to know,
      all the dot matrix printers in the market...
    that can print table lines in SMARTFORMS...
    (pls suggest the DM printers u are using and dont have this problem..i.e unable to print table lines in SMARTFORMS)
    thank you...

    Hi Sreesudha,
    I have used three different line types for the main window.
    LTYPE1(Header) : For printing the column heading along with the title for consignor address.
    LTYPE2(Main Area) : For printing the line items detail. For the first line, I have to print Material Description and chapter Id and if the same    material exists for the second line item, then it should not be printed, so I have written condition for not printing it.
    LTYPE3(Footer) : For printing the footer with the net and gross weight details.
    And for paragraph format, I have used the custom Para. Format only.
    Suggest me ASAP.
    Rgds,
    JK

  • Help with HP Laser Printer 1200se

    HP Support Line,
    Really need your assistance.  I have tried both contacting HP by phone (told they no longer support our printer via phone help), the tech told me that I needed to contact HP by e-mail for assistance.   I then sent an e-mail for assistance and got that reply today, the reply is as follows  "Randall, unfortunately, HP does not offer support via e-mail for your product.  However many resources are available on the HP web site that may provide the answer to your inquiry.  Support is also available via telephone.  A list of technical support numbers can be round at the following URL........."  The phone numbers listed are the ones I called and the ones that told me I needed to contact the e-mail support for help.
    So here I am looking for your help with my issue.
    We just bought a new HP Pavillion Slimline Desk Top PC (as our 6 year old HP Pavillion PC died on us).  We have 2 HP printers, one (an all-in-one type printer, used maily for copying and printing color, when needed) is connected and it is working fine with the exception of the scanning option (not supported by Windows 7).  However we use our Laser Printer for all of our regular prining needs.  This is the HP LaserPrinter 1200se, which is about 6 years old but works really well.  For this printer we currently only have a parallel connection type cord and there is not a parallel port on the Slimline HP PC.  The printer also has the option to connedt a USB cable (we do not currently have this type of cable).
    We posed the following two questions:
    1.  Is the Laser Jet 1200se compatible with Windows 7?
    and if this is the case
    2.  Can we purchase either a) a USC connection cord (generic or do we need a printer specific cord)? or b) is there there a printer cable converter adapater to attach to our parallel cable to convert to a USB connection?
    We do not want to purchase the USB cable if Windows 7 will not accept the connection, or if doing this will harm the PC.
    We really would appreciate any assitance that you might give us.
    Thank you,
    Randy and Leslie Gibson

    Sorry, both cannot be enabled by design.  That said, devices on a network do not care how others are connected.  You can print from a wireless connection to a wired (Ethernet) printer and v/v.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Delay in printing with HP laser printer query

    I use a I Mac as well as a Ipad and Mac Air.  My printer is a HP 1525nw laser printer.  My network is via a Time Capsule Router/back up.  When I print, there is a long delay before the printer starts.  The Imac printer app says it is printing, but it doesn't seem to be reaching the printer. My printer is connected to the Time capsule with a USB cable, but my computers are all connected via my Airport wireless.   When I check an hour or so later, the printing is usually finished.  Why the delay?  Any help from the Apple nation would be appreciated. 

    Hi there,
    This article should cover the missing colors you are experiencing. Give the steps located here a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Help with Brother Laser Print/Fax

    My printer is mac compatible. I just got the new airport extreme and would like to use my brother laser print/fax via usb. it's not working and on top of it my print utilities application is missing. any advice? thx

    Just in case you missed it - double check to make sure your Brother does not have an ethernet (CAT5) jack on the back.
    I have 4 Brother printers or AIO units, and they all have that connection, and are all Bonjour compatible. Even my cheapie $99 AIO color inkjet.
    If you do have the jack, just plug in to the AEBS with an ethernet cable, and you may even find that it supports "scan or fax over network", in addition to being able to do all the other advanced functions.

  • Stop rolling the the paper out in dot matrix priner once the print is done

    Hi,
    I have used the below code to print a document and the printer used is dot matrix But,it rolls out the page once the print is done.
    I want to control the printer so that it stops rolling out the page once the print is done. Or set the print based on the paper size and stop rolling the paper.
    public void Print_Doc(string Path)
    try
    Microsoft.Office.Interop.Word.Application word = new Microsoft.Office.Interop.Word.Application { Visible = false };
    Microsoft.Office.Interop.Word.Document doc = new Microsoft.Office.Interop.Word.Document();
    // where did you get this file name?
    // as you mentioned, you open your word document here
    doc = word.Documents.Open(Path);
    // in your button click handler, just call PrintOut() function
    // if doc == null, open the document
    if (doc == null)
    // here i assume fileName has been assigned
    doc = word.Documents.Open(Path);
    doc.PrintOut();
    catch (Exception ee)
    MessageBox.Show(ee.Message, "Exception", MessageBoxButton.OK, MessageBoxImage.Error);
    return;
    Please help me resolve this,
    Thanks,
    Shreyas M

    Not so much wpf there.
    Keep an eye out because this thread may be moved to another forum.
    I think Word will "throw" the page at end.
    You could check the advice here:
    https://support.microsoft.com/en-gb/kb/233493?wa=wsignin1.0
    See if you have an unwanted page break or something like an outsized table which is making it think it needs to print more.
    You might get lucky.
    Hope that helps.
    Recent Technet articles: Property List Editing;
    Dynamic XAML

  • How to find and replace the main logic board on HP4600N Laser Printer.

    Can anyone let me know how to replace the main logic board on my HP Laser 4600 N.  My printer was freezing up and in calling customer service, they informed me that the main logic board is going bad.  Now I have the part but no instructions on how to replace or where to find it on the printer. 

    A Google search may turn up a downloadable service manual for the Laserjet 4600.
    You might also ask in the HP Enterprise Business Community Forum here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • CMYK and RGB with a laser printer

    I'm using ID CS2 and a Konica Minolta bizhub C353P printer.
    I was supplied with a pdf artwork file by a customer. I believe it's CMYK, but am not sure, as Document Properties in Acrobat doesn't give that information. Firstly, is there a simple way of checking whether a pdf file is CMYK or RGB?
    I placed the pdf artwork into ID and printed the indd file, but found that the colours were not quite correct. So I imported the original pdf file into Photoshop and changed it from CMYK to RGB. I then saved it as a tiff file and placed it back in the indd file. The colours now printed correctly. Next question - is there a better way of converting a pdf file from CMYK to RGB and vice versa?
    When I printed the indd file the print driver would only allow me to print in Composite RGB - Composite CMYK and all the other options were greyed out. However, if I printed to Acrobat, Composite CMYK and the other options were available. Now as I'm printing to a CMYK laser printer, I would have thought it better to print in Composite CMYK. Am I correct?
    And can anyone suggest why the printer driver won't allow it?

    Edward
    here are some useful operations by Professional Acrobat 7:
    How to analyze image color spaces in a PDF:
    Tools > Print Production > Preflight > Digital Press (Color) >
    Execute > Overview > Images.
    How to convert images in a PDF (here DeviceCMYK to sRGB):
    Tools > Print Production > Convert Colors > Device CMYK:
    Convert > Profile > sRGB > Embed as Output Profile > Execute
    IMO there is no choice for an input CMYK profile.
    I don't know whether embedded profiles (not to be expected
    for CMYK) or a global Output Intent are honoured.
    How to edit images without loading the whole PDF in
    Photoshop (which would rasterize everything):
    Tools > Advanced Editing > TouchUp Object Tool > Right Mouse
    Click on Image > Edit Image > (Opens Image in PhS) >
    Edit here > Save > Close (Shows PDF with modified Image) >
    Save As by new name.
    Best regards --Gernot Hoffmann

  • Problems with hp laser printing in leopard- wired and wireless

    Printing problems in Leopard are slowly eating away at my last nerve!
    Here's the background: I have a Macbook Pro 2.33GHz Core 2 Duo, 4GB ram, running 10.5.2. Ever since I upgraded to Leopard, I've been having printing problems, both wired and wireless. I have an HP Laserjet 1160, which is a wonderfully reliable printer- I've had it since 2005 and have never had a problem.
    When I installed Leopard, I began getting a popup message after starting up my computer and logging in. The message has a lighthouse icon on it and reads:
    "Popup Error: Failed to listen for incoming Popup jobs. You will not be able to use Popup printing for the duration of this session. Please report this incident to a system administrator."
    (for the record, I only have one computer, it's not on any system, and I have the administrator account)
    Here are the two problems I have:
    -First, wired printing is spotty. Half of the time, when I connect the USB cable and click print, nothing prints. Usually, if I unplug the cable and plug it into the other USB port, then printing works. This is in spite of the fact that the computer recognizes that the printer is there- I can delete then re-add the printer to my printer list and still nothing.
    -Second, wireless printing does not work at all. Again, the printer is recognized when plugged in to either the time capsule or the airport express, and I can add the printer, but printing doesn't work: the job is sent to the print queue, but the queue stalls on the "connecting to printer" phase.
    This problem is a huge pain, and I have no idea how to solve it. Any help is appreciated.
    Jon

    Thanks for posting this problem Cathjock. I have had the same issue with a NEC Superscript 1400. Thinking it wast he printer, which is getting up there in age, I went out and purchased a new HP P1505 to no avail. I have been researching this for a few days now and think that all of this is related to a user permission in CUPS. I have de-installed, re-installed, re-booted etc as prescribed and got three pages hours after the fact via my Airport Express connected new printer. Generally, however, nothing comes out immediately as was the case in the past either on Airport Express or via USB cable. I am stumped and am starting to get worried.
    I can't print invoices for my business and am considering firing up my old Windows machine if you can believe it !
    Seriously, Apple has created a monstrous situation with all of htese printing issues and nothing is apparently being done, nothing that I can find in any of the discussion forums at this time.
    My last option is to re-install 10.5 with an archive and install as I really cannot afford to start from scratch.
    Now if you look at this forum, there are 242,847 views logged with 2,514 questions and 13,848 messages.
    This should mean something for Apple as many people need help and are getting really really ******-off.
    So pleeeeaaaaase Apple. respond and offer a fix for this problem that is plaguing a ton of people.
    Chris

  • Problem with pritning with dot matrix

    Hello evryone,
    I need some help. I actually made a straight line with the character '|' to be printed from a dot matrix printer. and It partly prints straight. If possible, Can anyone please provide some help?
    Thanks.

    Hello  Shiva,
    thank you for your reply. Actually Dot Matrix printers do not print borders, bu only charcters. So, if you put a frame around a window or a around a line type in smart form , it simply does not print. So, must use characters to draw line..
    actually, i did it manually.. very time consuming but the only solution i got... thanks again for our reply
    regards,
    devi

  • Printing Barcode in Dot Matrix Printer

    Dear Experts,
    We have developed Smart form to print Barcode and it's printing fine in LaserJet printer & readable by the scanner,  We need it on Dot Matrix printer for (multiple copies) and tried the same with Dot Matrix printer it use to print but not readable with scanner.
    SAP Transaction - MIGO (GI Posting)
    Dot Matrix Printer - Epson DFX9000  & Oki data PACEMARK 4410
    Please help me to Print Barcode in Dot Matrix printer through Smart form.

    There is something I don't understand: if the barcode printed is visually correct, and exactly the same as with a laser printer, why do you want it would be better with a PDF (especially on a dot matrix printer).
    Could you also tell us what symbology you use, and do you use smart form new barcode technology?

  • PO printing issue in Dot Matrix printer

    Hi expert
    We got unnecessary spaces on the second page while taking a PO print out.
    printer is dot matrix- EPSON LQ2180.
    Page Format     DINA4
    Device type is EPESCP2
    Can any body help in this matter?what have i to do remove unnecessary spaces from PO printout?
    And also i can not under stand the code which was written in Page Format DINA4?
    please find below codes.Help to understand the below code as well.
    Printer initialization
    reset
    \e\0x40
    designate codepage for slot 0
    \e\0x28\0x74\0x03\0x00\0x00\0x03\0x00
    select codepage from slot 0
    \e\0x74\0x00
    set line spacing 6 LPI
    \e\0x32
    set page length to DINA4 (=70 lines at 6 LPI)
    \e\0x43\0x46
    cancel bottom margin
    \e\0x4F
    set left margin to 0
    \e\0x6C\0x00
    select LQ quality
    \e\0x78\0x01
    select non-proportional spacing
    \e\0x70\0x00
    Thanks
    MM
    Edited by: samir DODIYA on Feb 28, 2012 1:30 PM

    There is something I don't understand: if the barcode printed is visually correct, and exactly the same as with a laser printer, why do you want it would be better with a PDF (especially on a dot matrix printer).
    Could you also tell us what symbology you use, and do you use smart form new barcode technology?

Maybe you are looking for