Replacing old HD with SSD and Hybrid HD Mac Pro 2008, 10.7.5

My old 1tb 7200 rpm drive has started doing some quirky things, so I decided to upgrade to a 240 Gb SSD for my OS and App's, and I would install the 2TB Hybrid drive to hold the home folder with movies, pics, music. So I formatted my 2TB disk in disk utilities.
I copied, by dragging and dropping my home folder from old drive to new 2TB, I went into system preferences, under User/Group created a new user at the administrator level, and set the new user to open at login.
When I restarted it was the old galaxy screen, the dock had moved back to the bottom and it was set up different.I also can open Iphoto or itunes and they are empty, "The folder “Pictures” can't be opened because you don’t have permission to see its contents", and the same goes for Itunes, I haven't tried FCPX or the Adobe Products I use.
"So, I think well I probably just need to set up my ssd with my OS and App's so the new disk can see my prefrences", so I format, use Carbon Copy Cloner, deselecting, under the User tab, my old User and the New user I had created for the new 2TB drive, because I have no room for it on the 240 GB drive. And, I deselected some apps I didn't want to come over. I cloned it, changed my start up disk in my preferences, and restarted.
I still get the same thing when I logged into my new 2TB Drive. I am planning on keeping my old drive for archive, and I also backed up to an external using Time Machine before I started messing with the new drives.
Please Help!
Mac Pro 2008
OSX 10.7.5

Mac OS X is inherently a Multi-User system designed to protect each User's data from all other Users. A new User does not have access to your existing files, including the desktop Preferences and the Dock Preferences
You need to do one of:
a) change all the permissions all around -OR-
b) make this change without creating a new User (e.g., by cloning your original User or by Installing a new version of Mac OS X and using Assistants to connect to the old User data. This guide can help:
Setting-up a new Mac from an old one, its backups, or a PC

Similar Messages

Replace old router with WRT110 and now I can not see shared printer on network

Replaced a BEFW11S4 with a WRT110. Now I can not see a shared printer on the network any more. I have not changed anything on the computer that has the printer shared. I can see the internet on all the computers, but not the shared printer. can you help?

First which you need to check, is your printer is working Offline on your computer. In this case you need to Re-map your Printer on your Computers back again. First check if you have any Firewall or Antivurs Installed on your computer try to disable it and check if you are able to print from your computer. If not then try to Remap the printer on your computer.
Go to Network connections window and if you are able to see your computer name on which the printer is installed, then right click on the Printer and click on "Connect" or "MAP" once done you will be able to print from your computer.
Note down the IP address of the Computer on which you have Installed the Printer. (Click on Start - Run - CMD and click Ok, now in the command prompt type "ipconfig" and note down the Ip address, Then go to your other computer and Click on Start - Run - CMD and click Ok and now in the Command prompt type "ping (IP address of your main computer) and hit enter and check if you are getting any replies. If yes, then again click on "Start - Run - type ( \\ip address of your main computer) and click Ok, and now you will be able to see your printer name then right click on it and click on "Connect" or Map, once done, now check if you are able to print from your computer.

Poor performance with Yosemite and early 2009 Mac Pro

I have an early 2009 Mac Pro with the following specs:
- 2.66 GHz Quad Core Intel Xeon
- 10 GB of 1066 MHz RAM
- NVidia GeForce GT 120 512 MB
- 256 MB solid state drive for my system partition
- Two monitors connected, each at 1680x1050 resolution
Back when I was running OS X 10.7 or 10.8 I found that for every day tasks the performance using my computer was adequate. However, starting around 10.9, and even worse since upgrading to 10.10, thinks have gotten painfully slow. To give an example, activating Mission Control can take upwards of four seconds, with the animation being very choppy. Changing tabs on a Finder window can take two seconds for the switch to happen. Just switching between different windows, it can take several seconds for a window to activate. It's gotten to the point where I'm having difficulty working. So I'm thinking of upgrading some of my hardware.
Given my specs the weakest link seems to be my graphics card, and all of these issues do seem to be related to graphics. So my questions are:
- Do you think upgrading my graphics card will substantially improve things, and is there anything else I should upgrade?
- Is this slowness just the result of the computer being nearly six years old, and no upgrades will really improve things that much?
Thanks in advance!

Between Setup Assistant, and your existing system "untouched" (or use CCC if say you want to use an existing SSD for the system) there is no reason it should be a lot of work setting up. Have you ever used Migration or Setup? it has also gotten better.
Also, having 10.9.5 on another drive and running DU - and TRIM _now_ would be helpful.
Looking at just what gremlins you have running around inside your current system is not bad but.... sometimes the "long road" turns a shortcut into a dead end, and avoiding doing what seems the long road and hardest gets you where you want to go: a solid stable system.
Less is more. Most systems have more than needed and they get in the way and can cause trouble. Even handy "widgets" and those things that monitor system functions, even disk status. Which is why I like seeing a separate small system maintenance volume just for the weekly checkup. 30GB is more than enough so just slice out a partition somewhere - on another drive/device.
Those things, more so than and a lot cheaper than a new GPU. If your SSD is two years old, the 840 EVO from Samsung is down under $120 for 250GB, or use one for Lightroom / Aperture / iPhoto or scratch.
One person was complaining about sluggish window issue and thought it was the driver. Turned out It happened in ONE APP, not everywhere - very telling - and the app in question needs update. Adobe updated CC (for Windows) last month to finally support dual Dxx and some of the newer AMD GPUs - can the mac be far behind?
10GB RAM? that would not be 3 x 4GB or any combination using triple channel memory.

Replacing optical drive with SSD and HD with new HD

Hi folks, recently my macbook pro unibody's (2011) hard drive started encountering some fatal errors. I've gone through all possible fixes, and it looks like the only option left is to replace the HDD. As much as this initially bummed me out, I'm a little excited about the prospect now. I think I would like to go ahead and replace the optical drive with a SSD while I have the computer open to replace the HDD. This will breathe some serious new life into my macbook pro.
My question is, which SSD's and HDD's are compatible with the macbook and which brands do you guys (the community) recommend? Should I upgrade my ram while I'm in there? How difficult of a job is this? I am mechanically inclined but I have much more experience working on tractors than electronics. Thanks for any advice or input you can offer!

Go to OWC to get the Data Doubler bracket for your model. You can also find HDDs and SSDs there. Be sure to put the SSD where the HDD is located and put the HDD in the optical drive bay. Upgrading RAM is always a good idea. I've done all these in my 2011 MBP. OWC also provides tools needed and online video tutorials.
For optimum use of this combo only install OS X on the SSD. Install everything else on the HDD. Then follow these instructions for setting it up to have the computer boot from the SSD but use your Home folder that is on the HDD:
How to use an SSD with your HDD
If you are going to use an SSD as a boot drive together with your existing HDD as the "data" drive, here's what you can do.
After installing the SSD you will need to partition and format the SSD using Disk Utility. Then, install OS X on the SSD. After OS X has been installed boot from the SSD. Use Startup Disk preferences to set the SSD as the startup volume.
Open Users & Groups preferences. Click on the lock icon and authenticate. CTRL- or RIGHT-click on your user account listing in the sidebar and select Advanced Options from the context menu. You will see a field labeled "Home dir:" At the right end you will see a Change button. Click on it. In the file dialog locate the Home folder now located on the HDD (HDD/Users/account_name/.) Select the folder, click on Open button. Restart the computer as directed.
When the computer boots up it will now be using the Home folder located on the HDD.
Another more technical method involving the Terminal and aliases is discussed in depth here: Using OS X with an SSD plus HDD setup - Matt Gemmell. This is my preferred approach because I can select which of the Home's folders I want on the HDD and which I don't want. For example, I like to keep the Documents and Library folders on the SSD because I access their content frequently.
Be sure you retain the fully bootable system on your HDD in case you ever need it.
Be sure to use Trim Enabler 3.3 to activate TRIM on the SSD.

Recently replaced optical drive with SSD and stripped the screw of the hinge on the optical drive. Now speaker is muffled

I still have the hinge but its not on the enclosure for the ssd. Now my speaker on the right side is muffled. Do I need a replacement bracket or is my problem unrelated?

It would be helpful if you indicated the EXACT model/year MBP that you have.
What 'hinge ' are you referring to? I am unaware of any hinges on an optical drive.
Look at the iFixit.com website for pictorial instructions that may assist you with your problem.
Ciao.

Replacing the HDD with SSD and reinstalling Mountain Lion

Hello,
I have a MacBook (Mid 2010) since August 2010. Since then, I have been using Time Machine and every time Apple releases a new OS, I download it from the Mac App Store and put it on a USB so that I can boot from it, whether to reinstall the OS or in case I faced Hard Drive problems.
My HDD is dying slowly, so I planning to get an SSD. The version of Mountain Lion that I have on the USB is 10.8.
The question is, do I have to download a newer version of Mountain Lion (say 10.8.3) from the Mac App Store knowing that I will be restoring from Time Machine?
Thank you..

Since you want to restore what's on TM to the SSD, the SSD needs to be booted from to receive the restored files and to do that, the SSD has to have an OS on it. And since you'd want to have the SSD's OS updated to the latest ML version eventually, you might as well do that first, since, to some degree, it's also a test of the SSD's functioning. Since you already have the Combo updater, you could just run that, and since it's only a bit over 800 MB, it might even fit on the flash drive. I don't believe that migrating from a TM file made by and containing 10.8.3 data would be problematic when initiated from a 10.8.0 installation (which is I think what you're asking), but there may be some subtle software changes we don't know about that could come back and bite. So starting the migration after updating to 10.8.3 would be the safest bet. At the same time, Setup Assistant brings your existing account stuff over to just reestablish your existence on the SSD, while Migration Assistant is run after a new account has been set up on first boot, so I'd think Setup Assistant is the better way to go.
In which case, how about this: when you run the Combo updater, you are given a choice of which drive you want to install it on. If I remember the sequence correctly (it's been a while since a fresh install), you run the installer, which transfers files to the target disk, and then reboot. The installation takes place on the target disk which then reboots again to begin the setup process. When the startup chime sounds the second time, use the option key to run Startup Manager and pick your flash drive to boot from again. If you already have the Combo updater on the flash drive, run it from there and pick the SSD as the target. When it's finished, if it doesn't start from the SSD, choose that as the Startup Disk (check to see that it says 10.8.3 in Preferences) and when it boots, start the Setup Assistant process using TM.
Or is the flash drive only an installer, meaning it doesn't actually have ML installed on it so you can't use it like an actual boot disk from which you can do normal boot disk things?

I have a Mac book pro with regular drive, I want to replace the drive with SSD, so can I do t for Mac book pro purchased in 2012 and which SSD is recommended. I am looking for 500 to 700GB SSD.

I have a Mac book pro(13 inch non-retina, i7) with regular drive, I want to replace the drive with SSD, so can I do it for Mac book pro purchased in 2012 and which SSD is recommended.
I am looking for 500 to 700GB SSD.
Thanks

Upgrading your MacBook Pro with a Solid State Drive...
...call back with any questions.
Clinton

Fail to enter bootcamp win7 after replacing CD-Ron with SSD

I replaced CD-Ron with SSD.
I successfully enter mac on both HD and SSD, failed with enter win7 on HD.
It stops at black screen and a write bar shining on the corner.
Is it because the windows system can't find my CD-Ron?Then how?
Tks. ^^

So I try booting without the DVD player attached, and there is no Windows option or startup item.
I try booting with the DVD plugged in, but without the USB attached, and I get the Windows DVD to show as a start up option: I click it and it sits with a black screen and the blinking prompt.
I am seriously at a loss here folks. What the heck.
The machine sees the DVD.
It does not see or acknowledge the USB stick as anything past the BOOTCAMP function of putting files on it, but nothing happens with it past that.
Am I missing something in BootCamp? Am I missing an option?
Cello?
*** Report for internal hard disk ***
Current GPT partition table:
#      Start LBA      End LBA Type
1             40       409639 EFI System (FAT)
2         409640    975835479 Unknown
3      975835480    977105023 Mac OS X Boot
Current MBR partition table:
# A    Start LBA      End LBA Type
1              1    977105059 ee EFI Protective
MBR contents:
Boot Code: None
Partition at LBA 40:
Boot Code: None (Non-system disk message)
File System: FAT32
Listed in GPT as partition 1, type EFI System (FAT)
Partition at LBA 409640:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 2, type Unknown
Partition at LBA 975835480:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 3, type Mac OS X Boot

I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help.

Can I make a bootcamp Partition on the HDD on an iMac 21.5" with SSD and HDD

I am planning to buy an iMac 21.5" . I am not sure yet, whether to get one with ssd and hdd pre-installed. But I would like to, cause it's much faster.
In the manual of the boot camp it says that if you have more than one internal hard drive and you wanna put bootcamp on one that isn't the first, you have to remove the other hard drives. That would be hard cause you can't open the iMac easily. And especially not without loosing guarantee.
So my question is. Has anyone installed windows with bootcamp on an hdd partition on an iMac pre-installed with ssd (on which is macos x) and hd(on which I want my windows partition and the Mac files such as photos and videos)? It must be possible without opening the iMac right?
Thanks for your help.

27" iMac: Apple's SSDs are still quite slow
Community Search: "iMac SSD"
That article is misleading to an extent and applied to the workstations with 4 internal drives and easy to access - and misleading as to why other drives had to be removed etc.
As for warranty, it use to be a customer upgraded part to swap out hard drives. All that is needed to disconnect the data cable going to the drive.

Hi! is it possible that Logic X has upgrades that work only with mavericks and does t work in mountain lion....since in my macbook pro with mavericks i have new views of the equalizer, etc and in my mac pro with mountain lion it still the old view...

Hi! is it possible that Logic X has upgrades that work only with mavericks and does t work in mountain lion....since in my macbook pro with mavericks i have new views of the equalizer, etc and in my mac pro with mountain lion it still the old view...

Any OS version of 10.8.4 or later has all features that are not OS depended. The plugins are one example. You probably haven't updated all versions of Logic Pro X to the latest one.

I just bought Macbook pro with SSD and sometimes it is making noice like wind is blowing and it heats up my Mac.. So, is it normal?

I just bought Macbook pro with SSD and sometimes it is making noice like wind is blowing and my Mac heats up.. So, is it normal?
I would really appreciate any responce..
Thanks..

here you go: http://www.apple.com/downloads/dashboard/status/istatpro.html

How can I resize a pdf page content with annotations and highlights in Acrobat Pro?

How can I resize a pdf page content with annotations and highlights in Acrobat Pro while maintaining page size and annotation/highlight interactivity? I've tried to use the crop tool in Acrobat Pro (9) and the page does resize, but the highlights and annotations go all over the place. I specifically need to scale the page content smaller (83%) but maintain page size and annotation/highlight to content connection and interactivity.

An old trick (not recommended) would be to print to a new PDF with the page size selected but a scaling of the content. Only print the document, not the markup, to a new PDF. Close that PDF when done and reopen the old one (or maybe a copy of the old one for safety) and use Document Replace pages and select the new document to replace your current pages. You will then have to go back through the markup to locate it all correctly. There may be a more elegant way, but this may be the fastest.

Intel 320 160gb SSD any issues with mac pro 2008?

Hi there.
I have a mac pro 2008. and Install Intel 320 160gb ssd. and boot...
It's shows black screen...
is any one has that issue? I tested that SSD with my old quad mac pro 2007, it works fine...
Please help me....

The 2600XT required 10.5.2+ and while it may 'look' like a G5 the Mac Pro is not. G5 refers to IBM PowerPC based, not Intel Xeon EFI based.
You're running 10.6.3, might want to update your profile itself.

HT1727 i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?

i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?

If you bought them on your iPad then you will need to connect your iPad to your computer's iTunes and do File > Devices > Transfer Purchases to copy them over to the Tones part of your computer's iTunes library and you can then sync them to your iPhone - ringtones are a one-time only download, so you won't be able to redownload them directly on your phone.

Replacing old HD with SSD and Hybrid HD Mac Pro 2008, 10.7.5

Similar Messages

Maybe you are looking for