Replacing older airport extreme with time capsule

I am thinking of replacing my airport extreme with time capsule. I had a lot of problems setting up airport extreme a few years ago - now it is very reliable. I don't want to have the same issues with time capsule. Can I simply physically replace the airport extreme with time capsule using the same settings as previously
Advice gratefully anticipated

Welcome to the discussion area, pancuronium!
You will use AirPort Utility on your Mac for this operation:
(Macintosh HD > Applications > Utilities > AirPort Utility)
Open AirPort Utility and click Manual Setup
Click the File menu at the upper left corner of the screen near the Apple icon
Click Export Configuration File
Assign a name to the file and save it to a convenient location like the desktop
When you are ready to install the Time Capsule....
Open AirPort Utility and click Manual Setup
Click the File Menu
Select Import Configuration File
Navigate to locate the file that you exported to import all the settings into a new configuration for the Time Capsule
Message was edited by: Bob Timmons

Similar Messages

Replacing an Airport Extreme with Time Capsule

I have had my wireless network setup and working for a few years.
I've decided to replace my Airport Extreme with a Time Capsule.
Can I simply disconnect the Airport Extreme, connect the Time Capsule and configure it with the same SSID & Password? or is there a procedure for accomplishing this that I'm not aware of?
Rick

rickinlv wrote:
I have had my wireless network setup and working for a few years.
I've decided to replace my Airport Extreme with a Time Capsule.
Can I simply disconnect the Airport Extreme, connect the Time Capsule and configure it with the same SSID & Password? or is there a procedure for accomplishing this that I'm not aware of?
Welcome to Apple's discussion groups.
What you describe should work, but first you might want to try this approach: Use AirPort Utility to put the Extreme into "manual setup" mode. Use the menu option File -> Export Configuration File to write the configuration to a file. Replace the Extreme with the Time Capsule, put it into "manual setup" mode, and use the menu option File -> Import Configuration File to read the Extreme configuration into the Time Capsule.
Full disclosure: I haven't tried this. If it works, you'll have saved yourself several minutes of configuring. If it doesn't work, then proceed as you originally planned. And let the rest of us know how things went.

Replacing Older Airport Extreme W/Time Capsule

Greetings,
Just received my new TC, and want to replace my existing Airport Extreme (older "Mushroom shaped' one).
Do I have to setup an entirely new wireless network, or is there a way to just transfer the settings, etc. from the older Airport (network name, password, etc.)
Trying to avoid having to reconfigure all the wifi devices in the house to work on the new TC.
Thanks
Jim

Thanks for the response Tesserax!
You are correct - during setup the TC provides several options including importing settings from a previous airport.
Setup was easy and I'm pleased with the results - faster WiFi in the house, and 3 separate Macs backing up seamlessly to the Time Capsule - good stuff

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network? I have an ISP provided wireless Router that has to remain as the base station. I am able to join my 1/2TB Airport Extreme and Airport Express to the network, but I can't access/use Time Machine.

One option would be to connect the Time Capsule (TC) to the ISP-provided wireless router by Ethernet. You can then configure the for a roaming network. Then, depending on what your goal is for the AirPort Express, you can either: 1) Add it to roaming network, 2) Configure the TC & the Express for an "extended" network, or 3) Configure the Express to "join" the roaming network for AirPlay.

Swap airport extreme with time capsule

My family has an Airport Extreme (2 years old) with two additional Airport Expresses for Airplaying music from iPad, iPhones and iPod Touches. Just purchased a 2 TB Time Capsule for backup purposes of the MacBook Pro. Would like to exchange the Airport Extreme with the Time Capsule but really could use detailed step-by-step, since I would like to keep all passwords/configurations the same. Could somebody help?

Easy solution:
Shut down everything (remove power.) Disconnect the AEBS. Replace it with the Time Capsule by connecting all cables in the same way. Then turn on the modem and wait for it to communicate with your ISP. Next turn on the Time Capsule and wait until the status light turns green or blinking amber. Last, turn on the computer(s). You should be all set. Open Airport Utility to do any tweaking that may be needed for security and wireless, etc.

Can I use Extreme with Time Capsule to extend my gateway router and still use Capsule as "external HD"?

Bought Airport Extreme with Time Capsule version 7.7.2 with 2 Terabytes Feb 2014. It was probably an expensive mistake, but after searching for weeks for a external hard drive, it seemed reasonably priced to just use the capsule as my external hard drive for the price I paid. Spend an hour with Apple Care to get it working-had to use ethernet cord to my iMac OS 10.8.5 processor 2.5 GHz Intel Core i5. I did not "need" the airport as we have a Winstream SAGEMCOM modem/router (Sagemfast 1704) But, I was desperate and about to lose my old external hard drive with literally had 3 computers worth of information on it. It had already "died" once, but got it back, so once I got the airport/capsule and was told I just paid for an expensive HD, I had no time to take it back to get something else-I had to transfer my info right then. We (Apple Care) could not get it to work as a HD wirelessly. It may be because it was being set up for the first time; I don't know. I was hoping I would get a transcript of all done so I could do it myself if needed later on, but when I looked at my email-they didn't do that. (Don't know if that is normal, I was used to other "techs" sending the email.) So now I really want to try to move my airport and "extend" our wifi as it said on the "box" that you could do...
Our Windstream router had to be placed in the lower level at the bottom of our stairs. The stairway is "open" (no door going down the steps). I want to place the Extreme at the top of the stairs so that we can use some things in our offices or not have Netflix on our TV lose connectivity when we all are on our computers.
I know I need an ethernet cord to connect directly with the modem/router to the Airport Extreme. I don't know what I will need to do after I connect it as it was so goofy when we set it up the first time (With the app it would disappear and not show up..) But my biggest concern is will I be able to still use the capsule as my hard drive and will I be able to do it wirelessly? (Even with it connected by ethernet, every day I have to re-connect to it before I can click on anything on the hard drive. It never shows up on it's own as my old HD did. That drives me nuts.) I do back up using the Time Capsule feature as well. I appreciate any help.

I am still willing to plug in the ethernet cord to the modem/router and try it IF I was able to get a step by step instructions..
Connecting the Time Capsule (TC) to the existing Winstream by Ethernet would be the basis for a roaming type network. This type of network allows you to basically "roam" with a wireless client and connect to either router. This, in essence, would provide you with an "extended" wireless network. The Apple routers can work with just about any manufacturers' routers in this fashion.
The keys to having a successful roaming network are as follows:
The routers must be interconnected by Ethernet.
Both routers will broadcast their own Wi-Fi network, but MUST use the same Network Name (or SSID), wireless security type (WPA or WPA2), and wireless password.
The TC MUST be reconfigured as a bridge.
Connect a single Ethernet cable between one of the Winstream's LAN ports and the WAN (circle of dots) port on the TC.
The basic steps are:
Power-down the Winstream.
Perform a "factory default" reset on the TC. Leave the TC powered-down after the reset has completed.
Connect the TC to the Winstream using an Ethernet cable.
Power-up the Winstream. Wait at least 10-15 minutes to allow it to initialize.
Power-up the TC. Wait at least 5 minutes to allow it to initialize. (Note: Since we just reset the TC it will be performing as a wireless router that will be broadcasting an unsecured Wi-Fi network with a Network Name of something like: Apple Network NNNNNN)
Connect your computer to the Winstream's Wi-Fi network.
Run the AirPort Utility. select the TC, and then, select Edit.
Go to the Network tab.
Change the Router Mode option to: Off (Bridge Mode)
Select the Wireless tab.
Verify that the Network Mode option is set to: Create a wireless network
For Wireless Network Name, enter the Wi-Fi network name used by the Winstream.
For Wireless Security, select the equivalent security type that is used by the Winstream. (Note: Use "WPA/WPA2 Personal" if the Winstream is using WPA/TKIP. Use "WPA2 Personal" is the Winstream is using WPA2/AES.
For Wireless Password, enter the same password used by the Winstream.
Select Update and allow the TC to restart.
As far as your external HD, yes you should still be able to use it as before.

Do i need air extreme with time capsule?

Do I need Airport Extreme with Time Capsule?

A Time Capsule is an AirPort Extreme...with a built in hard drive.
If you have a Time Capsule, you would not need an AirPort Extreme unless you wanted to install the Extreme at another location in your home and have it "extend" the Time Capsule network to provide more wireless signal coverage.

I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?

I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?

Start with a "hard reset" (see below) then use AirPort Utility to configure it.
When asked what you want to do with it, indicate that you want it to add to an existing network, similar to the following screenshot.
Follow the prompts that will eventually lead you to the words "wirelessly extend..." as shown.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

Am replacing airport extreme with Time Machine and want to upgrade from Tiger to Snow leopard. Am told I should manually back up into T Machine before OS update but set up utility won't allow anything with OS below 10.5 and I'm 10.4.11. What to do?

Am replacing airport extreme with Time Machine and want to upgrade from Tiger to Snow leopard. Am told I should manually back up into T Machine before OS update but set up utility won't allow anything with OS below 10.5 and I'm 10.4.11. What to do?

I think you mean you are replacing your Airport Extreme with a Time Capsule. Time Machine is software integrated into OS X 10.5 & 10.6 used to automatically backup a system to an external HD. Time Capsule is an Airport Extreme that has a hard disk integrated into it that can be used for storage or as a Time Machine backup drive.
Because you are currently on Tiger 10.4.x you can backup to a external HD using SuperDuper or Carbon Copy Cloner. Having a backup is very wise before doing any major system update. After you have created the backup and have successfully upgraded to Snow Leopard you can still use the external HD for many things. The strategy I'd recommend is to use the new Time Capsule as your Time Machine backup and then use the external HD as backup using SuperDuper or CCC. Redundant backups is wise because backups can (and do) fail too! In addition both SD and CCC are bootable clones, this is useful in that if your internal HD crashes you can boot from a cloned drive and continue working until the internal HD is replaced.
Below are some links to some articles from MacWorld, I would recommend reading them where you find a common theme, redundant backups. Backup Plan I, Backup Plan II & Backup Plan III.
Roger

Cisco router RVS4000 with Airport extrem and Time capsule.

Problem droping connection to internet when is Time capsule in extended wifi mode. When I turn off wifi on time capsule Airport extreme work fine.
Airport extreme and Time capsule is conected via ETH.
Any idea ?
Thaks
B.

If you use ethernet to connect the AE and TC .. you must NOT extend wifi.. you use Create a wireless network. And setup with same name and security. You are using roaming network.. not extended wireless.. if you want to use extended wireless no ethernet
see http://support.apple.com/kb/HT4260

How to replace a older Airport Extreme with a newer model? (OS 10.6 w/ Mac Mimi)

How do I replace a older Airport Extreme with a newer model? (Mac Mini OS 10.6.8 )

There is not much more to it than to buy a new one, and configure it using AirPort Utility.
You should be using AirPort Utility 5.6.1.
Power down your modem before removing your older Extreme and connecting the new one.

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network?

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

How do I connect Airport Extreme and Time Capsule to my new iMac so that AE is used for network and TC only used for Time Machine backup?

I didn't realize that Time Capsule will only support the print function of a wireless multifunction printer. So I want to use Extreme for my network to have full use of my printer and use TC as the Time machine backup only. How to I make the connections?

Thanks for your response and this is getting complicated but I just purchased a new iMac as well as the Airport TC. I've had the Airport Extreme for a year or so. The Airport Extreme worked perfectly with my old iMac wirelessly and I had all functions of my printer with no problems. I was expecting the same with the TC. But the instruction that came with TC say to connect the printer to the TC via USB...which I did. And the print function worked perfectly but nothing else. In researching I discovered that when wired that way the TC only supports the print function...not scan or fax or anything else. I tried going wireless since my AE worked perfectly via wireless but I got no printer functions at all that way. But I'm wondering also if I tried that during a time I was having other issues...I had to delete and re-add my printer which solved some other problems. I may try that again...and see if I can get all print functions with just the TC connected
As far as connecting both your AirPort Extreme and Time Capsule on your network, we're not clear on exactly how you want to do this. Will the AirPort Extreme connect to your modem using an Ethernet cable and the Time Capsule connect to the AirPort Extreme using an Ethernet cable?.......or......do you want the Time Capsule to connect to the network using wireless?
Well... first of all I would like not to have to use the AE at all...I would prefer using just my TC for network, all print functions and Time Machine backup if that's possible. My printer will not accept Ethernet connections (Canon MX512).
After failing at getting this to work, I decided I would try to use my AE for net and print functions and just use my TC for Time Machine backup. I tried several different connection configurations with no success until finally I connected cable modem to my AE via Ethernet and went wireless with the AE and printer. but connected the AE to the TC via Ethernet and amazingly everything worked like a charm (for a while) and I was patting myself on the back for being so smart. But now I find that the connection only lasts for a short time. If I leave it for a while the TC goes invisible...or at least I see a message saying the Ethernet is unplugged...but it is not... and I lose internet connection even though I have a green light on my AE. So now I'm at a loss. I don't know why I keep losing network signal and why my system thinks the Ethernet is unplugged.
So... after all this...I figured I wasn't so smart after all and I must have things wired incorrectly.
So... it sounds like you are saying I should go back and try again to get my new TC to work as I want it to via wireless instead of connecting via USB...is that correct? Could you tell me exactly how I should wire my equipment from cable modem to AE and/or TC to achieve net capability, full functions of my printer and Time Machine backup...
Thanks...

My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.

My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.
I am running OS 10.7.5
Both the TC and AE are updated to 7.6.1
The Seagate drive in formatted: Journaled HFS+
I tried everything on Apple's Article: HT1331 and the basic reboots and restarts.
"Next"

It sounds like you may be confusing "mount" with "recognize".
Connect the drive to the USB port on the AirPort Extreme
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon, then click Edit
Click the Disks tab
Does the AirPort Extreme "recognize" your hard drive? If yes, it will be displayed in the window.
See example below of a WD 500 GB drive connected to the AirPort Extreme.
If your drive is formatted HFS+ and it does not appear here, then you will almost certainly need to use a powered USB hub with the hard drive.....even if the hard drive has its own power supply. The USB port on the AirPort Extreme and Time Capsule is under powered.
Post back when the drive is "recognized" and we will next "mount" the drive.....although you likely already know how to do this.

Connecting to Airport Extreme w/ Time Capsule

How can I connect a MacBook Pro to an Airport Extreme w/ Time Capsule?
The computer does not have an ethernet connection.
I would like to perform the first backup to Time Capsule with the computer physically connect to the Airport Extreme.

You'll need Thunderbolt to Gigabit Ethernet Adapter - Apple Store (U.S.)

Replacing older airport extreme with time capsule

Similar Messages

Maybe you are looking for