Replacing On-Premises AD with AAD

Hi All,
We have on-premises AD and a AAD tenancy in the cloud.
We are planning to use DirSync + Password Sync to synchronized the identity data.
My question is - Can Azure Active Directory be used as a domain service for LOB applications residing on-premises and for device (laptops/desktops) authentication?
I understand we can move on-premises AD to Azure to set up a cloud based domain service for LOB applications and devices.
But we dont want to do that.
Can we use just the AAD for authentication/authorization requirements for all applications (LOB and Cloud) and also the devices (laptops and desktops)?
Regards,
Ajay Suri

The term Line of Business Application does not define how it may integrate to a 3rd party directory service, such as Active Directory or Azure Active Directory. Having said that, its doubtful that any of your existing LOB apps were written to work
with Azure AD, given its newness, difference in protocols, etc.
The 2nd part of your question applies to the Windows operating system's integration with Azure AD. Currently, Windows 8.1 can authenticate users with local credentials, Active Directory domain credentials, or a LiveID. At time of writing, there
is no ability to "join" a workstation to AAD, or get SSO without additional tools (such as ADFS).
Mike Crowley | MVP
My Blog --
Planet Technologies

Similar Messages

I just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer?

i just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer? i have downloaded the 3800 software three times and the imac keeps telling me there is no software to run the printer? Any help here?

Care to share which OS you are using?

How to replace typewriter (straight) apostrophe with typographic (curly) apostrophe?

I have a manuscript I got off the Internet that has a bunch of isn?t's and wasn?t's and the like—due, I assume, to some miscommunication between MS Word's automatic curly quotes and the ASCII limits of ISO Latin 1. I tried doing a find-and-replace to put typographic apostrophes in place of the question marks. Pages found the question marks and put typewriter apostrophes in place of them, though I'd carefully entered a typographical apostrophe ((opt-shift-]) in the Replace field. So I tried again, to replace the typewriter apostrophes with typographical apostrophes. Pages now replaced the few typographical apostrophes I'd manually entered with typewriter apostrophes. Well, at least it's consistent. So far as Pages, Apple's flagship word-processing/page-layout app is concerned, there's apparently no such thing as a typographical apostrophe—something that was understood, as I recall, by the original MacWrite 25 years ago. So do I have to go back to doing all my editing in TextEdit (which seems to be much better at text work than Pages), or can somebody tell me how to persuade Pages to take care of this trifling little task correctly?

Copy these two paragraphs into a Pages WP document:
When you?re sleep deprived… parental control of baby?s sleep… meet baby?s needs consistently… respond to baby?s cries…
"Parents should recognize that having their babies cry unnecessarily harms the baby permanently," Commons said. "It changes the nervous system so they?re overly sensitive to future trauma."
Open the Find & Replace dialog. Enter Find: ? and Replace: ’ (opt-shift-}). (I.e. replace question mark with typographical apostrophe.) Click Replace All. It should say 5 Replaced. Check any of the replacements by enlarging the type; you’ll see an ASCII apostrophe ['] rather than the requested typographical version [’].
Then enter Find: " (space-") and Replace: “ (space-opt-[), and click Replace All. It will say 1 Replaced, meaning the quote mark preceding "It" in the second sentence (the only quote mark preceded by a space). Enlarge the replacement to see it clearly; it's replaced an ASCII " with another ASCII ".
So far as I can tell, Pages’ Find-Replace function can't tell the difference between ASCII apostrophe/quote marks and the typographical versions. Maybe it will once you turn on smart quotes in preferences; I haven't tried that -- but then of course you'd get smart quotes when you don't want them, for instance for something to be posted on an Internet forum, which often doesn't understand them. (The problems above and similar, often seen on the 'Net, are due to MS Word's having smart quotes on by default, so unaware users compose material with them and send it out over teh Interwebz, where they sometimes come through correctly, sometimes don't.)
Try the same experiment in TextEdit; you'll get the requested typographical versions. And so I did, then copied the text back to Pages. Like I said, kinda shoddy for Apple's Pride & Joy word processor. AppleWorks, by the way, does it right.

Replace one itunes account with another

I have the itunes application downloaded on my laptop but i recently made another itunes account and i want the new one to be on the Itunes application. So i uninstalled the application thinking that if i downloaded it again it would ask me for an account. Except all it did was restore the old account. I am wondering if anyone knows how to replace one itunes account with another. If you know anything that can be useful comment.

Store > Sign Out
Store > Sign In
All purchases remain tied to the account used to buy them, but you can authorize iTunes to multiple accounts and put protected content from up to five on your devices. Generally best to stick to one account if possible. More so once you get to iOS devices as managing app updates over multiple devices is a chore.
tt2

Just replaced my iphone 4 with new 4. restore from icloud is hung on an app I no longer use (password probably expired) how can i get the restore to move on to the next app

just replaced my iphone 4 with new 4. restore from icloud is hung on an app I no longer use (password probably expired) how can i get the restore to move on to the next app

Read another post in the forum about this and it appears this app also installs a profile with a proxy service that you will have to try and delete as well. Check that out.

I replaced my old iphone with a new one and i lost it i want the s/n of the new one

i replaced my old iphone with a new one and i got it without the box today my new iphone is stolen and i need the serial number of the new one
thanks

Read here for the various ways to locate the SN:
http://support.apple.com/kb/HT4061

How Can I replace newScale Text Strings with Custom Values?

How Can I replace newScale Text Strings with Custom Values?
How can I replace newScale text strings with custom values?
All newScale text is customizable. Follow the procedure below to change the value of any text string that appears in RequestCenter online pages.
Procedure
1. Find out the String ID of the text string you would like to overwrite by turning on the String ID display:
a) Navigate to the RequestCenter.ear/config directory.
b) Open the newscale.properties file and add the following name-value pair at the end of the file:res.format=2
c) Save the file.
d) Repeat steps b and c for the RmiConfig.prop and RequestCenter.prop files.
e) Stop and restart the RequestCenter service.
f) Log in to RequestCenter and browse to the page that has the text you want to overwrite. In front of the text you will now see the String ID.
g) Note down the String ID's you want to change.
2. Navigate to the directory: /RequestCenter.ear/RequestCenter.war/WEB-INF/classes/com/newscale/bfw.
3. Create the following sub-directory: res/resources
4. Create the following empty text files in the directory you just created:
RequestCenter_0.properties
RequestCenter_1.properties
RequestCenter_2.properties
RequestCenter_3.properties
RequestCenter_4.properties
RequestCenter_5.properties
RequestCenter_6.properties
RequestCenter_7.properties
5. Add the custom text strings to the appropriate RequestCenter_<Number>.properties file in the following manner (name-value pair) StringID=YourCustomTextString
Example: The StringID for "Available Work" in ServiceManager is 699.
If you wanted to change "Available Work" to "General Inbox", you would add the following line to the RequestCenter_0.properties file
699=General Inbox
Strings are divided into the following files, based on their numeric ID:
Strings are divided into the following files, based on their numeric ID:
String ID File Name
0 to 999 -> RequestCenter_0.properties
1000 to 1999 -> RequestCenter_1.properties
2000 to 2999 -> RequestCenter_2.properties
3000 to 3999 -> RequestCenter_3.properties
4000 to 4999 -> RequestCenter_4.properties
5000 to 5999 -> RequestCenter_5.properties
6000 to 6999 -> RequestCenter_6.properties
7000 to 7999 -> RequestCenter_7.properties
6. Turn off the String ID display by removing (or commenting out) the line "res.format=2" from the newscale.properties, RequestCenter.prop and RmiConfig.prop files
7. Restart RequestCenter.
Your customized text should be displayed.

I've recently come across this information and it was very helpful in changing some of the inline text.
However, one place that seemed out of reach with this method was the three main buttons on an "Order" page. Specifically the "Add & Review Order" button was confusing some of our users.
Through the use of JavaScript we were able to modify the label of this button. We placed JS in the footer.html file that changes the value of the butt

I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the bad template with a blank.

I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the unwanted template with a blank. It was previously possible to go to MY TEMPLATES and remove the unwanted templates. I don't if this issue is before or since installation of 10.8 (a nightmare in my case, which led to significant failure issues). And because I haven't tried to remove templates since finally managing to install 10.8 (now at 10.8.4), I don't know if this is typical of the newer OS or a problem. I've been a Mac user for more than 25 years, but I think I'm nearing the end of the road. By the way, I've never needed to do this before because the manuals always offered an answer... they don't seem to do that anymore. In any case, I don't know how this works... I'd prefer an email reply if that's possible. But that would probably be too easy, and I don't know how to get a reply.

Thanks, I appreciate the help. I think this is one of the problems Apple is creating by changing the OS so often. I had fomer colleagues at [a major aerospace contractor] who told me that so many original files were ultimately lost because of the deadly change in the "Save As" operation that they are now afraid of every OS update. Apple has badly damaged their support base with that very prominent company (they won't update now until they've fully examined and understand changes in the pre-conditioned nature of OS computer functions), and they are a whole lot less enthaled with Mac-related equipment/software. Can't blame them, I too used orginal files that way (as easy-to-use templates), and lost some important files before I realized what was happening (to late to revert). Companies should not have to retrain employees each time an OS gets an update, it's can be very expensive several different ways. They learned a painful lesson with that one. And because I'm now retired and don't use multiple devices, I need iCloud like I need a hole in the head... but I'm told there's no way to keep Apple out of my computer. Fortunately, because of major problems when initially installing Mountain Lion, one hold-over of the hardware/software damage I experienced was that iCloud can no longer access my computer even though everything else is working fine again. That was the only "good luck" I had as a result of that expensive nightmare.

When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered my other computers on the Wi-Fi network could no longer access the printer. The manual says Maverick OS will not allow PC's to access the printer. Any thoughts?

When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered that my other computers on the Wi-Fi network could no longer access the printer. The manual says Maverick OS will not allow PC's to share the printer. Does anyone else have this problem? My printer does not have on-board Wi-Fi but, otherwise, works fine. I shouldn't have to buy a new one. Is there a OS patch out there that would open the printer port for my PC computers?

I'm assuming that on the Mac, the System Preferences -> Sharing -> Printer Sharing -> [X] HP printer -> Everyone can print is selected? That is to say, the Mac will allow anyone to print using the printer, and that you did not try to restrict who can print.
How is your network configured? Bonjour as a protocol will NOT cross a router boundary. If you have 2 or more subnets active with the PCs on one subnet and the Mac on another, that would block the PCs from seeing the Mac.
You could have multiple subnets if you have more than one router, such as an ISP provided broadband modem/router and another WiFi Router. If the PCs are talking to one router and the Mac is talking to another, that could be a 2 subnet situation. The additional routers must be put into bridge mode, which is done differently depending on the router. But the basics are to diable DHCP and NAT services on the secondary router(s) having just one active router on the network.
Also, using Bonjour Browser on my Mac, it is showing me that the printer is being advertised as using Internet Printing Protocol, so if that is something selectable on Windows, maybe you can bypass Bonjour on Windows.

I had to replace my Iphone 5c with a new one. Now, my windows 7 pc does not recognize my iphone. Reinstalled itunes. Apple mobile device is running. I did whatever I could find on the internet still no luck. Any suggestions? Thnx

I had to replace my Iphone 5c with a new one. Now, my windows 7 pc does not recognize my iphone. Reinstalled itunes. Apple mobile device is running. I did whatever I could find on the internet still no luck. Any suggestions? Thnx

You have done everything verbatim included with this link?
http://support.apple.com/kb/ts1538

Replacing an Airport Express with a Time Capsule but it won't connect to the internet.

Hello, I hope somebody can help.
I am trying to replace an Airport Express with a 2TB Time Capsule but it won't connect to the internet, via an ADSL modem.
I have tried everything I can think of, powering down all devices, re-setting all devices, but nothing seems to solve the problem.
When I first tried to set up the Time Capsule, there was an option to replace the Airport Express using the same settings.
But there were repeated error messages of 'No DNS Servers' and 'PPPoE server couldn't be found'.
I also had messages that the password for PPPoE wasn't correct, but when I plug the Airport Express back in again, everything works fine.
What could the problem be?

99% of issues with authentication are wrong password or wrong username.. eg it can be strange like the user name is missing the domain.. whereas the Airport Express works fine without it.
Ring your ISP and make doubly sure you have exactly the correct username and password.
If it still doesn't work, put the adsl modem back into router mode and try it again directly on the modem.. if it works ok on the modem but fails on the TC that is possible and can be caused by pppoe client using incorrect authentication type, CHAP or PAP which the TC does not allow you to select AFAIK.. some ISP do not give enough time to get the router to switch on auto to the correct authentication method.
In the end run the modem as router and bridge the TC. It will work just as well for most installations in bridge as the modem in bridge.

BAdi / Exit to replace MIRO Invoicing Party with PO Invoicing Party

Hi,
Following is the current scenario :
PO is created on branch vendor (with a HO vendor mentioned in master). While doing MIRO, the system automatically
replaces the branch vendor with the Head office vendor (as mentioned in master). The region taken for tax purpose
is the region of the HO vendor.
Now as per our business requirement, we want to replace MIRO Inv. Party (RBKP-LIFNR) with
PO Inv. Party (EKKO-LIFRE) and want to do tax calculation based on branch Vendor.
We have already tried out all BAdis mentioned in SAP Note 1156325 - BAdIs in the Logistics Invoice Verification environment, but not able to map this replacement during t.code MIRO.
Pls suggest which User Exit / Badi need to be used?
Thanks & Regards,
Taral Patel

Thanks to all

I had a problem with the hard disk on a 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB and when I tried to erase and format It fails with input/output error. Any help much appreciated!

I had a problem with the hard disk on a 13" 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB disk but when I tried to erase and format, it fails with input/output error and at other times saying unable to allocate memory. Any help much appreciated!

Zap the PRAM and Reset the SMC, then try again.

(2011 13" Macbook Pro Model 8,1) I want to replace my 320GB HDD and replace it with a 6gb/s 120GB SSD. I also want to replace the optical drive with a 7200RPM HDD 750GB.

I want to use:
The SSD and enclosure to replace the optical drive with the new HDD
So basically, I want to use the SSD in the link above. I want to set this up as either preferrably a fusion drive. If not the smoothest most stable configuration. I have a Macbook Pro Early 2011 13" with 8 GB of ram, 2.3 GHz Intel Core i5, 320GB HDD.
I want to install the SSD directly to the SATA port where the 320 GB HDD is currently. I then want to install the new HDD, preferrably a name brand 750 GB 7200RPM hard drive where the optical drive is now. I want the storage to work in a way in which the OS, and my most used programs and files get stored on the SSD, and everything else gets stored on the larger hard drive. My most preferred method would be Fusion drive, or a SPAN drive.
I would like to use a Seagate Momentus XT, but I learned that there might be issues with compatability with this. I dont mind using the 3 gb/s 500GB option, but would like to know if it would even be smart to do it. I also have no problem settling for a regular 7200 RPM hard drive.
I have read a bunch of stuff online but I still am not sure if this is even possible. I want my machine to run as fluid as possible so any info would be appreciated.

bump

HT4889 Replacing System hard drive with a new one. How to get everything over to the new boot drive?

Replacing System hard drive with a new one. How to get everything over to the new boot drive? Should I use Carbon Copy or does apple have a better untility to do this?
I can't get my current system drive (OSX 10.8.3) to start on the first try. I always have to shut down and restart again to finally see the Apple logo.
Have used disc utility to repair the disc and permissions several times and that works. The next time I boot up, it works fine and I get the apple logo, but then the second time I boot up, it's back to the blank screen again and it only boots after the second try. I have tried this repair three different times now always with the same result. Works right the first try (after the repair) then from the second time on it doesn't work. I just get the white screen until I reboot a second time.
Thinking I should change drives but what's the easist and best way to move everything over to the new drive so it will boot correctly with all my data on it. This is the system drive for a Pro Tools 10HD setup. MacPro 3,1 with 16 gigs ram and OSX10.8.3 on it.
Thanks for any help!

If you have a time machine back up of your current drive you can do this
Shut down your computer, install the new drive. While the computer is off plug in the external hard drive that you have your time machine back up on. Hold Option key while the computer turnes on, let go of the option key once you get a grey screen. Shortly after you'll see a list of bootable drives, select the one that has your time machine back up on it and boot into that drive.
From there go into disk utility, format your new drive too, osx extended journaled ( I think, double check that, its been awhile since ive had to do this), hit format
Exit disk utility and then you can use time machine to copy all your exisit data to the new hhd and then your pretty much done.
There is also a program called Carbon Cloner that will do esentially the same thing however I've never uesed it.

Replacing On-Premises AD with AAD

Similar Messages

Maybe you are looking for