Replacing one NIDAQPad-6016 by another
When replacing one NIDAQPad-6016 by another one it is not possible to take over the once installed DAQmx-Tasks. Why?
That's expected and normal behavior. As long as you don't remove the first DAQPad from MAX another DAQPad will be recognized as a different device and the driver assigns a new device ID (Dev2). You need to go to MAX and change the name if needed or you need to make your software try various device IDs until no error occurrs anymore.
Best regards,
Jochen Klier
National Instruments Germany
Similar Messages
-
Replace one itunes account with another
I have the itunes application downloaded on my laptop but i recently made another itunes account and i want the new one to be on the Itunes application. So i uninstalled the application thinking that if i downloaded it again it would ask me for an account. Except all it did was restore the old account. I am wondering if anyone knows how to replace one itunes account with another. If you know anything that can be useful comment.
Store > Sign Out
Store > Sign In
All purchases remain tied to the account used to buy them, but you can authorize iTunes to multiple accounts and put protected content from up to five on your devices. Generally best to stick to one account if possible. More so once you get to iOS devices as managing app updates over multiple devices is a chore.
tt2 -
Replace one preset effect with another
Is it possible to replace one preset effect with another withouth having to undo a prior preset effect?
When I used Aperture, holding down the Option key would allow me to replace one preset with another.Store > Sign Out
Store > Sign In
All purchases remain tied to the account used to buy them, but you can authorize iTunes to multiple accounts and put protected content from up to five on your devices. Generally best to stick to one account if possible. More so once you get to iOS devices as managing app updates over multiple devices is a chore.
tt2 -
I accidently replaced a file with another. Can I undo my action?
I had two files named graphics. One was on my desktop and another was within another file called solitarie. I move the one on my desktop (wrong file) into the solitarie file and was asked if I wanted to replace the graphics file in the solitarie folder (the correct one). I said yes accidently and then remembered that I had made a mistake. If I use undo, it only move the wrong file back to the desktop. Is there an undo of replace?Sorry, but's that's why you get the warning. "Replace" means just that - the new file over-writes the old one. There is no undo.
-
Replacing one control field by another
Hello Everybody,
Is it possible to replace existing control by any other control in the same view? I am using removeFromSuperview method to hide some lable and fields when I click on another tab but I am not able to create any other on that location. Is there something wrong in my approach? or is there any other way?
Any suggestions are highly appreciated...
Thanks,
Pandit PakhurdeFirst of all, I had taken one TabviewController. In one of the tab of that TabViewController , I placed one tableView. After clicking on a one row of tableView , One view will be open. This view created by me like below code.
<code>
self.window = [[[UIWindow alloc] initWithFrame:[[UIScreen mainScreen] bounds]] autorelease];
_frontView = [[UIView alloc] initWithFrame:[[UIScreen mainScreen] bounds]];
[_frontView setBackgroundColor:[UIColor lightGrayColor]];
</code>
and in this _frontView I have one button and text field. then I am adding this _frontView into self.Window.
Next again I had created one another view and added it into self.Window. Now I am seeing the second view in my window.
Now in the second view ,I have added segmentedcontrol with two objects i.e. UserInfo and Friends.
When I will click on UserInfo then I should get userInformation that I am getting already and when I will click on Friends then I should get friends list but at the same time Userinformation should get hided. I am getting friends list but userInformation is not hided properly.
First I had user "removeFromSuperView" api to remove that fields and it works fine when I click on Friends but when I again click on the UserInfo then friends information is not hided eventhough I am hided them using "removeFromSuperView" method.
Can you please help how to get out of it?
I am working on this but not getting any solution.
Thanks,
Pandit Pakhurde -
Replace one swf movie with another
I have a flash movie on my web page and I have made some of
the text inside the movie into buttons. The movie only takes up a
portion of the page. I would like to replace the movie with another
movie when somebody clicks the button.
I'm sorry if this is a really basic question but I have spent
ages trying to find out how to do it and I keep getting an error
when I try to search this forum.
Thanks for your help.Thanks for your help so far. I seem to be having more and
more trouble though!
I have a swf file (sunnyserv.swf) that contains a pre-loader
and then opens another swf file (downturn.swf). The downturn.swf
contains the buttons that I want to listen to, and swap out the
movies.
If I open sunnyserv.fla in flash and test the movie, it loads
downturn.swf, listens to the mouse click and runs the
communication.swf movie (although it doesn't clear all of the
children from downturn.swf).
However, if I export all three movies and open my web page
nothing happens! If I change the xhtml to load downturn.swf that
works ok. Any idea why it would work in test movie but not when
loaded into an xhtml page?
Also, can you see a reason why all of the children are not
being removed in the commClickHandler function?
Code below:
sunnyserv.swf (container)
var l:Loader = new Loader();
l.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,
loop);
l.contentLoaderInfo.addEventListener(Event.COMPLETE, done);
l.load(new URLRequest("downturn.swf"));
function loop(e:ProgressEvent):void
var perc:Number = e.bytesLoaded / e.bytesTotal;
percent.text = Math.ceil(perc*100).toString();
function done(e:Event):void
addChild(l);
removeChildAt(0);
percent = null;
downturn.swf
import flash.events.MouseEvent;
import flash.events.EventDispatcher;
import flash.display.MovieClip;
var l:Loader = new Loader();
// add listeners for each button
btn_communication.addEventListener(MouseEvent.CLICK,
commClickHandler);
function commClickHandler(event:MouseEvent):void {
for(var i:int = 0; i < numChildren; i++){
removeChildAt(i);
l.load(new URLRequest("communication.swf"));
addChild(l);
stop();
Hope somebody can help! -
How to replace one BC template with another
I am using an existing BC template and want to change to a new template (same domain) - any thoughts on how to achieve this?
Thanks.Change a BC template to another? You can not at this stage on that same site, you would have to create a new site yourself or update everything manually
-
How do I replace one video file with another
Hey all
I'm new to Imovie, so please bare over with me.
I made a long movie using a MOD format file from my JVC home camera
When I where to convert or burn the movie in Imovie it made an error.
After much trouble I found out that it was the MOD format that was the problem
So I bought an expensive piece of software that converted the MOD file to MOV:
And with a new test project it now works flawless...
Anyways back to the original project and the problem:
- I have now converted the original MOD file to MOV
- I have the original Imovie project with the MOD file.
How do I replace the mod file in the imovie project with the new mov file, while keeping, that is transfering all my work on the mod file over to the new mov file?
Thnx
Kris• In the Layers Panel draw the Layer’s Vector Mask icon onto the trashcan-icon
• move that Layer above the new Text Layer
• invoke Create Clipping Mask (command-alt-G) from Layers Panel’s fly-out menu or alt-click on the line separating the two Layers’ icons -
How do I replace one vector mask with another?
I have a template for a web site that I'm trying to figure out as I learn CS5. The template has a vector mask created out of some writing that was converted into an object/vector mask. I would like to replace with a layer I created that has different writing in it. How would I replace the vector mask in the template with the new object I created?
Thanks for any help you can give.
Best -- Catherine• In the Layers Panel draw the Layer’s Vector Mask icon onto the trashcan-icon
• move that Layer above the new Text Layer
• invoke Create Clipping Mask (command-alt-G) from Layers Panel’s fly-out menu or alt-click on the line separating the two Layers’ icons -
How to replace one variable with another in large number of queries
Hello guys!
I have this situation: our company needs to use one variable instead of another for certain amount of queries.
Is there some way to automatically replace one variable with another for a certain characteristic in big number of queries ( like 150 - 200 ) ? Doing this manually would take lots of time)
Apreciate your help!you could try (at your own risk) the following:
1. search the technical id (ELTUID) of your variable in table RSZELTDIR
2. see where this variable is used in table RSZELTXREF (by filling RSZELTDIR-ELTUIID in RSZELTXREF-TELTUID)
3. add similar entries for your new variable
4. delete the entries for the old variable (they're part of the key, so you can't simply "change" them) -
How to replace an audio clip by another one in a Aperture slideshow?
Hello,
Is it possible to replace an audio clip by another one in a slideshow in Aperture? This clip is between two other audio clips.
Thank youIs it a secondary audio clip?
Then just select and press the delete key ⌫.
And drag a different audio clip from the Audio Browser there. The trim the clip by adjusting the start and beginning. -
Replace an iView dynamically by another one by portal navigation service
Hi all,
A portal page to integrate several kinds of contents is in general the best way.
But how can you handle dynamic replacement of an iView of a page (the page contains more than one iView) by another one by using the Portal navigation service? If I navigate to the target application with mode WDPortalNavigationMode.SHOW_INPLACE, the content of the page at all is replaced by the target iView. Is there a possibility to access/replace only the desired iView of the page?
Thanks.
CemalSee for the solution the following post.
Replace an iView dynamically by another one by portal navigating service
Cemal -
How do I replace one JPanel on a JFrame with another?
I want to replace one JPanel on a JFrame with a different JPanel when the user clicks on a certain menu item. The menu item is working corrrectly but I cant seem to repaint / refresh the component.
My code is as follows:
c.add(knotPanel, BorderLayout.CENTER);
c.add(stepPanel, BorderLayout.NORTH);
if (stepChoice != 9) {
c.remove(ownPanel);
c.add(lessonPanel, BorderLayout.EAST);
else {
c.remove(lessonPanel);
c.add(ownPanel, BorderLayout.EAST);
c.invalidate();
c.validate();
c.update(c.getGraphics());
Any ideas?I think you should use CardLayout manager.
With CardLayout you can switch beetwen JPanels without removing or adding. -
Replace one channel by another on only one layer, leaving the others intact?
Hello. In a CMYK image, I need to turn on only one layer one channel completely into another, while the others remain intact. The M channel (the M on that layer) contains information, but I can't print M in this place. I want to change it into an equal amount of K (or into C, in the present case, or even into a mixture of the two). I know how to do this to an entire image (change into greyscale, duotone or whatever may apply). But since I need this to apply to only one (or a selection of) layer(s), leaving all others intact, this is not an option here. I'm sure there's a way to achive this, but I can't find it. Any advice would be much appreciated.
bustamant wrote:
hello, thanks for your replies. As far as I understand, Channel Mixer (i.e., an Adjustment Layer containing a Channel Mixer applied to the layer in question) allows me to reduce one channel to zero,
You are completely correct up to here...
Then choose K as the desired output channel at the top of the palette and slide the M (source) slider to the desired value. You can choose more output channels by going to each output channel in turn.
The way it works is slightly confusing at first, but in a nutshell, you choose your output channel first, then mixture of sources. Then move to another output channel and the sources will be at the default position for THAT output channel only. Each channel has a set of source channels assigned to it.
Default; black output channel = 100% black source, 0% CMY
So your example is black output = 100% black source plus 100% mag source (although I expect you are going to change black source to 0)
AND magenta output = 0% Magenta 0% CYK source (no mag output at all) -
How to Move Music Library from one external HD to another
I had about 60GB of music on an external hard drive, nicely organized and "linked to" from iTunes (just upgraded to version 5). I recently purchased a larger external hard drive and basically copied the contents of my older external drive to the new one, preserving all folder structures from the root of the drives down (but the name of the drive itself is different.) I was hoping I could just do a search/replace of the "iTunes Music Library.xml" file in my Music/iTunes folder, to replace the name of the old drive (volume) with the new one. I did, and iTunes launches fine, preserving my playlists, song ratings, etc... but whenever I try to play any of the songs, it says it can't find it (I can manually point iTunes to it, but I don't want to do that for 15,000 songs...) Strange thing, though, is that if I quit out of iTunes and re-open the Library XML file, all the paths have been reset to their original location!! What am I missing? Thanks in advance,
JesseI just want to add that the iTunes folder (with the library xml file and such) is on my local hard drive, in the typical Music/iTunes location. I don't want to simply re-import the songs 'cuz I'd lose playlist contents and ratings, and I don't want to "consolidate" the library because I want to keep my music folders and filenames as I currently have them. Basically, I just want iTunes to realize the songs have simply changed location from one external drive to another... thanks again.
Maybe you are looking for
-
I have not been able to access the itunes store for the past month, it has been a long time since I have downloaded/purchased anything, probably around christmas time, but the problem is I click on the itunes store and the grey zebra striped bar just
-
Credit Memo Request for intercompany sales process
Hi Experts I try to find SAP notes regardsing the credit memo request for intercompany related issue but I can not find any nates. The customer return the goods with 2 different scenario :- -Return with credit -Return with replacement. Can anybody ex
-
New arrayCollection not by reference
I know I can make a copy of an ArrayCollection with ObjectUtil.copy or writing byte array and registering the type. But what happens if you take the source of an existing ArrayCollection, the Array itself, and create a new array? Is it unreferenced
-
Help, can't install Adobe After Effects CS5 (trial)
I tried to install the trial version of Adobe After Effects CS5 trial version and it doesn't work, when I opened the setup application it was all working fine until the installation, it went for a little bit then stopped and came up with an error mes
-
How can I open websites that use adobe flash ?
How can I open websites that use adobe flash ?