Replacing online gallery flowers flash with another flash scene?

I'd really like to have a little variety and be able to get rid of the flowers that appear as the online gallery is being loaded/prepared.
Is there any way to do this?

I'll second the recommendation to use JAlbum. If you pick the right skin, it generates completely standard-conforming HTML:
http://jalbum.net/forum/thread.jspa?messageID=110021
Adobe will always push you to use its proprietary technologies. For that reason, even if they were to make non-Flash galleries available, I would much prefer to generate my galleries independently.
Edward

Similar Messages

How can I replace one low quality source with another high quality one ?

Am I really this dumb or is it really this hard ?
I have one timeline / project / edit that essentially references one long source clip / event / file.
I have a newer higher quality transcoded version of the same source and want to replace the original lower quality version and end up with the same edited result just with better quality images !?
It's the same frame rate and image dimensions but "relink" tells me the new file is not "similar" enough and won't do it !
Why is this so hard ? Is there a way to export a good old fashioned edl and then just reconform using the new source ?
What if I wanted to to replace low res offline footage with finished colour-corrected material and output a finished master - would that be this clueless as well ?
Please let me know the problem is between the chair and the keyboard - not between the hard disk and the power cord !

Guessing that when you created the higher quality media, it was done outside of FCP and probably changed some important metadata that the app is looking for. Or perhaps there is a difference between the original audio and the new audio.
Anyway, Luis' advice about the replace edit seems like the easiest solution.
a_mumford wrote:
What if I wanted to to replace low res offline footage with finished colour-corrected material and output a finished master - would that be this clueless as well?
The usual way to do offline online is within FCP – creating the proxies and then using Preferences to switch back to and from.
If you sent it out for grading, the Relink should work fine. If you haven't seen this kb doc, it's worth reviewing.
Russ

To completely replace an existing web page with another

Dreamweaver CC / Windows 7 / ...nube
So , bought a domain and w/hosting (major headache) ... I run into this "Make your webpage ..." offer .. with all the excitement and hoopla , I decided to take the "do-it-now-modify-later" route ... Hah !!! ... do I need to continue ? .
Ok , so , how do I completely replace the existing layout / template with the one already on the site , which basicly is just a header and a name .... ? FTP connected ... webpage in Dw already .
I appreciate and can use all the help I can get
vahn

>Though that is what I thought but would so doing , I wondered ,
>keeps the older page still active ? , like in the back or underneath the new page ?
Keep in mind that Unix servers are case sensitive, so index.html is not the same file as Index.html. Maybe that's part of your problem?

Is there a good way to replace the "view cart" text with another text?

I have this big issue i'm still stuck with, i hope someone can help me.
I need to change the text "view cart" in the cart-summary module. I have learned that i can do this with javascript: http://forums.adobe.com/message/4409239#4409239
But there are problems:
When i use this javascript:
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.min.js" type="text/javascript"></script>
<script>
$(function () {
$(".cartSummaryLink").text("Afrekenen");
$(function () {
$(".cartLink").text("Winkelwagen is geleegd");
</script>
The "view cart" is replaced with "afrekenen".
BUT:
When i add another product in the large product layout the text "view cart" is back...
When i delete a product in the cart the "view cart" text is also back
When i refres the page the "view cart" text is replaced again with "afrekenen"
So i thought, to use some javascript to refresh the page when a product is added:
<script type="text/javascript">
function AddProductExtras(){
document.location.reload(true);
</script>
This works but you can see that the text changes from "afrekenen" to "view cart" and back to "afrekenen" Also the page is rebuild again which is not a very good solution. So here are my questions:
Is there a better work around?
If not, is there a way that when a product is deleted in the cart the page can also be refreshed?
Thanks,
Frank

Hello Mario,
Here's my site where i'm working on:
http://grootaartseuronics.businesscatalyst.com/index.html
The cartsummary module is located at the right sitebar.
The code is:
<div id="plh_winkelwagen">
<div class="cart-summary">{module_shoppingcartsummary,vertical,}</div>
</div>
The CSS is:
#plh_winkelwagen {
float: right;
width: 160px;
height: 100px;
margin: 20px;
background-color: #FFC;
background-image:url(../Images/Winkelmandje_nieuw_25.png);
-webkit-border-radius: 15px; /* Safari */
-webkit-border-radius: 15px; /* Safari */
-moz-border-radius: 15px; /* Firefox */
-moz-border-radius: 15px; /* Firefox */
border-radius: 15px; /* CSS */
border-radius: 15px; /* CSS3 */
.shop-main .cart-summary {
float: right;
width: 40%;
So with your solution I should remove the background plh_winkelwagen en create or put it in the a.cartsummarylink? Or should i keep the plh-winkelwagen and just add your solution. I can create a png the same size as the: winkelmandje_nieuw_25.png with the "afrekenen" text in it?
Thanks,
Frank

Replace one InDesign license key with another

I work for a software integration company that has helped a customer install InDesign CS 5.5 in a terminal server environment.
InDesign CS 5.5 was installed with a license key obtained from Adobe for X number of users.
Now the customer has obtained from Adobe a new license key for Y number of users.
I cannot find any information on this website or searching the wider web on how, exactly, to get this installation of InDesign CS 5.5 to run with the new license key instead of the old one.
Does anyone know how to do this?

As a practical matter, I don't think it matters too much. There's a certain amount of the "honor system" in volume licensing keys, and the real point is that you paid for the number of seats you are using. If the program doesn't complain about it, I would not spend too-too much time worrying about it.
It's not clear to me if your Y includes your X or not; that is, was X=100 and you added 200 seats and now X=100 and Y=200? Or X=100 and Y=300?
Volume licensing key activations aren't any different from regular license key activations, you can still uninstall (or deactivate, I believe) and install with a new key.
But your "terminal server" environment may complicate the situation if Y does not include X. You could have two seperate installs of ID, or you could have ID installed with either X or Y but not both.
I am not a lawyer and this is not legal advice.

Is there any way to replace a cisco Line card with another Model?

We bought a Cisco line card WS-X4648-RJ45-E for Cisco 4507 R-E. Later on I found that this module is not working with the chassis becuase supervisor engine 4 we are using. Supervisor Engine 6 is required for WS-X4648-RJ45-E. Now I want to go for WS-X4548-RJ45. Is it possible to return the line card? Is there any possible way to exchange? I am responsible for the mistake. I dont know what to do.
By the way, I am from Saudi Arabia

Unfortunately, yes. That is true.
However, did YOU specify the part number or did the reseller did? Did they ask relevant questions as to the specific model of your chassis and/or your supervisor card or not?

How to replace part of a String with another String :s ?

Got a String
" Team_1/Team_2/Team_3/ "
And I want to be able to rename part of the string (they are seperated by '/'), for example I want to rename "Team_3" to "Team C", and "Team_1" to "Team A" while retaining the '/' character how would I do this?
I have tried using String.replace(oldValue, newValue); but this doesnt work, any ideas?

What do you mean that it doesn't work? You do know that the method returns the modified string? The actual string that you invoke the method on is not altered.
/Kaj

Backup DC past tombstone and need help replacing it with another DC with the same name and IP

Hey Everyone
We have a single domain in a forest with 2 DCs with AD integrated DNS configured. The primary DC with all the FSMO roles is a VM (Server 2008 R2) and the backup DC is a physical server (Server 2008 non-R2).
The backup DC's hardware is very old and has been giving us a lot of issues where the system would intermittently BSOD, freeze, black screen only etc. and as a result, the server was turned off for a very long time, definitely beyond the default tombstone
lifetime of either 60 or 180 days.
We want to replace this bad backup DC with another physical server which became available as a spare and is much newer and in a working condition hardware wise. We also wish to ultimately give it the same name (FQDN) and IP to basically make it an outright
replacement for the current bad backup DC.
My questions are:
1.) If we are in a position where the bad server could possibly physically boot and start the operating system and have network connectivity, will we be able to use DCPROMO as one would normally do to demote this DC, or will it have to be done forcefully,
while keeping in mind as I said that the DC is way past the tombstone lifetime period?
2.) If it has to be done forcefully, I am aware that the meta data needs to be cleaned up in AD on the working primary DC, although I have never performed such a process before. If this is done, are there any other things I need to look out for or do
before I attempt to replace it with the other server which I will set up wit the same name (FQDN) and IP, then add to the domain, and then lastly promote as per normal using DCPROMO?
I know we will have to upgrade the scema to 2012RM as the replacement backup DC will be running this newer operating system.
Anything else you wish to add or point out to me would be highly appreciated. Thank you in advance.
Regards,
CTV

Hi,
I would suggest please do the metadata cleanup using the script and then remove object from below DNS console and then run the repadmin /syncall /Aed
https://gallery.technet.microsoft.com/scriptcenter/d31f091f-2642-4ede-9f97-0e1cc4d577f3
Repeat running the vbs script till the wrong/unnecessary dc’s are removed.
         Cross check the removal – dsa.msc [ad users and computers] > Domain Controllers OU
Adsiedit.msc
Expand domain partition, select OU=Domain Controllers, make sure only the necessary domain controllers are listed.
Delete the incorrect domain controllers.
Dnsmgmt.msc [Dns Management]
      Expand the forward lookup zones\_msdcs folder
i.      Make sure only the actual domain controllers are listed, delete wrong Alias recordsremove wrong name server records
ii.      Select the container [forward lookup zones\_msdcs.domain.com\dc\_sites_\sitename\_tcp] > delete incorrect _ldap and _kerberos records are listed.
iii.      Select the container [forward lookup zones\_msdcs.domain.com\dc\_tcp] and delete incorrect _ldap and _kerberos records
iv.      Expand the [forward lookup zones\_msdcs.domain.com\domains\guid\_tcp] and delete incorrect _ldap entries
v.      Select [forward lookup zones\_msdcs.domain.com\gc] – delete incorrect HostA records
vi.      Expand the [forward lookup zones\_msdcs.domain.com\gc\_sites\sitename\_tcp] – delete incorrect _ldap entries
vii.      Select the [forward lookup zones\_msdcs.domain.com\gc\_tcp] – delete incorrect _ldap entries
viii.      Select the [forward lookup zones\_msdcs.domain.com\pdc\_tcp] – delete incorrect _ldap entries
      Expand the forward lookup zones\domain.com folder
i.
Delete Host(A) records of dc’s which are non-existant.
ii.
Correct the NameServer (NS) records
iii.
Follow steps similar to ’ A ii ‘ >> ‘ A viii’
         Dssite.msc [Sites and Services]
      Expand the [Sites\Sitename\Servers] – delete incorrect server’s
B.      Delete incorrect subnet configurations [Sites\Subnets]
      Delete incorrect site links [Sites\IP]

I formatted and re-installed itunes. now it flashing massage that my ´ipod is synced with another iTunes library. An ipod can be synced with only one library at a time.´ now it is giving 2 options, 1- erase and sync, 2- transfer purchases. what to do?

i formatted and re-installed itunes. now it flashing massage that my ´ipod is synced with another iTunes library. An ipod can be synced with only one library at a time.´ now it is giving 2 options, 1- erase and sync, 2- transfer purchases. what to do?

Follow these instructions:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Replacing gen 5 (n) extreme with gen 6 (ac) The new one continues to flash amber.

Replacing gen 5 (n) extreme with gen 6 (ac) The new one continues to flash amber.

Suggest that you find out why the amber light is flashing.
Assuming that you have recent model Mac.......Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the amber dot
Another window will open
If you see an Update button, click it. The light was flashing to tell you an update was available.
Otherwise, look at the setting for Status and click on the small amber dot there. Report on the message that you see.

To whom this may concern, I'm having troubles with uploading Flash Files Online throught Adobe Flash Professional and I would to correct the Error Messages I've received as an indication that I need to correct them in order to test a Flash and Shockwave F

To whom this may concern, I'm having troubles with uploading Flash Files Online throught Adobe Flash Professional and I would to correct the Error Messages I've received as an indication that I need to correct them in order to test a Flash and Shockwave Files I have stored into the Software of Flash!. Could you please help me get this matter resolved? Gerard Hargrove.

what exactly are you trying to do and attach a screenshot of the error message, if it's in english.

Flash doesn't work and work with another browser!!

''locking as a duplicate of - https://support.mozilla.com/en-US/questions/900202''
Flash doesn't work and work with another browser!!.
The message is " An error occurred, please try again later" just with youtube. Other sites work. Another browser works with youtube!!

Whay do you mean "difficult with the camer?"
Two things that might help. Reset all your settings and reset the phone. Use the Settings app to reset all settings. Settings > General > Reset > Reset All Settings Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that helps.

Interaction Flash Lite with another applications

Hi:
I would like to know if exists any posibility of communicate
or interact my flash lite app with another non-flash application
(for example using JNI or any kind of median layer between my flash
app and another app). This non flash app may be a java app for
example or another symbian app that I have developed
Thanks

Hi there,
Yes it is possible. You can use FSCommand("launch") to do
this.
///example:
The following example would open wap.yahoo.com on the
services/Web browser on Series 60 phones:
on(keyPress "9") {
status = fscommand("launch",
"z:\\system\\apps\\browser\\browser.app,
http://wap.yahoo.com");
Hope this helps,

Replace one swf movie with another

I have a flash movie on my web page and I have made some of
the text inside the movie into buttons. The movie only takes up a
portion of the page. I would like to replace the movie with another
movie when somebody clicks the button.
I'm sorry if this is a really basic question but I have spent
ages trying to find out how to do it and I keep getting an error
when I try to search this forum.
Thanks for your help.

Thanks for your help so far. I seem to be having more and
more trouble though!
I have a swf file (sunnyserv.swf) that contains a pre-loader
and then opens another swf file (downturn.swf). The downturn.swf
contains the buttons that I want to listen to, and swap out the
movies.
If I open sunnyserv.fla in flash and test the movie, it loads
downturn.swf, listens to the mouse click and runs the
communication.swf movie (although it doesn't clear all of the
children from downturn.swf).
However, if I export all three movies and open my web page
nothing happens! If I change the xhtml to load downturn.swf that
works ok. Any idea why it would work in test movie but not when
loaded into an xhtml page?
Also, can you see a reason why all of the children are not
being removed in the commClickHandler function?
Code below:
sunnyserv.swf (container)
var l:Loader = new Loader();
l.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,
loop);
l.contentLoaderInfo.addEventListener(Event.COMPLETE, done);
l.load(new URLRequest("downturn.swf"));
function loop(e:ProgressEvent):void
var perc:Number = e.bytesLoaded / e.bytesTotal;
percent.text = Math.ceil(perc*100).toString();
function done(e:Event):void
addChild(l);
removeChildAt(0);
percent = null;
downturn.swf
import flash.events.MouseEvent;
import flash.events.EventDispatcher;
import flash.display.MovieClip;
var l:Loader = new Loader();
// add listeners for each button
btn_communication.addEventListener(MouseEvent.CLICK,
commClickHandler);
function commClickHandler(event:MouseEvent):void {
for(var i:int = 0; i < numChildren; i++){
removeChildAt(i);
l.load(new URLRequest("communication.swf"));
addChild(l);
stop();
Hope somebody can help!

Online galleries without Flash???

Hi,
in PSE 6 or 7, when building an online gallery of pictures
to be put on a web site, I seem to be unable to find a way
to build a gallery that doesn't use Flash for navigation.
Is there any template somewhere that builds a thumbnail
page with only HTML and NO FLASH at all? I want the users
to be able to navigate without having the web flash plugin...
Thanks for any help
Steve

I'll second the recommendation to use JAlbum. If you pick the right skin, it generates completely standard-conforming HTML:
http://jalbum.net/forum/thread.jspa?messageID=110021
Adobe will always push you to use its proprietary technologies. For that reason, even if they were to make non-Flash galleries available, I would much prefer to generate my galleries independently.
Edward

Replacing online gallery flowers flash with another flash scene?

Similar Messages

Maybe you are looking for