Replacing overheated HP Pavillion DV9000 motherboard with Windows 7 capable motherboard?

I have a HP Pavillion DV9000 laptop (P/N RU971UA#ABA) that was given to me to fix the black screen problem, about one and half years ago. I tried once the reflow method on youtube to no avail. This laptop came with Vista Home Premium installed, with 2 GB memory. I want to purchased a new upgradable motherboard that will fit my original case, but has the capabilies of upgrading to Windows 7, 64-Bit, and at least 4 GB of memory. If there is no such motherboard, I want a permanent fix to this motherboard. This laptop boots up as normal, ( correct beeps), but without the screen. Can someone suggest a fix or repair shop?

Mufasa08 wrote:
First let me thank you for your response. So now, I'm stuck with a beautiful HP laptop, that can't be fixed, and HP will not assist with a overheating problem that they created with it's design of this model. This truly feels suckey. Poor HP, everyone who brought this model should be given a refund. So, it's pay for amother DV9000 motherboard or buy another laptop? I'm going to do some research and write a few letters, and see what that will get me. Thank you again.
That won't do much for the laptop since you already did the reflow and it failed. You should look on ebay for another board that was properly fixed and buy that and swap out your board. At least that way you will still have a functional laptop to be used for now til you go and by another laptop that doesn't have this history of problems.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Similar Messages

Pavillion g6 laptop with Windows 8 & 2nd monitor

I'm trying to get this new system working...are external speakers required?
Thanks!

8Jan0 wrote:
I'm trying to get this new system working...are external speakers required?
Hi,
No, it's up to your decision, we don't need external speakers for laptops. This has nothing to do with a second monitr/screen.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Is it possible to bitlocker-encypt a UEFI/GPT drive from which I boot with Windows 7 64-bit ultimate (TPM-motherboard)?

Is it possible to bitlocker-encypt a UEFI/GPT drive from which I boot with Windows 7 64-bit ultimate (TPM-motherboard)?

Sure. BL does support GPT.

Have a Pavillion g6 with windows 8. The cursor keeps freezing on me. Can anyone help

have a pavillion g6 with windows 8. have two issues. Cursor freezes and won´t move. Screen can zoom in and out without warning. can anybody help Please. Rocas

Same here, all I can do is reboot using keypad but you lose everything you have open.

Replace Zorin 9 OS with Windows 8.1 OS

I have an opportunity to purchase a HP TOUCHSMART 15-D069WM, 15.6" Intel [email protected] GHz, 6 GB, 500 GB for a reasonable price. However it has Zorin 9 OS. How can I replace the OS with Windows 8.1 I have the retail Windows 8.1 discs.

Hi,
Please start from step #2 of the following article:
http://windows.microsoft.com/en-AU/windows-8/clean-install
more reading:
http://www.howtogeek.com/187525/how-to-perform-a-clean-install-of-windows-8.1-with-a-windows-8-key/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Replace osx with window

Could I replace osx with window in a Mac mini with Fusion drive?

you can have both and have it always default startup into windows
100% removing osx is a bit more work which one have to be a bit into changing and deleting partitions to get working

Replace Mac line breaks with Windows linebreaks?

Is there a simple AppleScript that could process a plain text file created on a Mac and replace the line breaks with Windows-compatible \r\n line breaks?
I thought this would be a very simple task but have been searching for quite a while and can't find anything.
Thanks.
Paul

There are several approaches to this. Here's one of them:
set theFile to (choose file)
set MacText to paragraphs of (read theFile)
set {oldDelims, my text item delimiters} to {my text item delimiters, (return & linefeed)}
set WindowsText to MacText as text
set my text item delimiters to oldDelims
set outputFile to (open for access theFile with write permission)
set eof outputFile to 0
write WindowsText to outputFile
close access outputFile
To explain, the first line asks you to choose the file in question - you could use any technique to identify the file, including hard-coding the path or using a drag-and-drop handler.
The second line gets the current paragraphs and calls them 'MacText'
The third line saves the current text item delimiters in oldDelims and sets the new text item delimiters to the CR+LF combination.
The fourth line performs the magic of transforming the file. It does this by coercing the list of paragraphs (obtained in line 2) into a single text block, and it inserts the current text item delimiters between each text item, miraculously giving you CRLF-terminated paragraphs.
The fifth line restores the text item delimiters to whatever they were before (you don't know what they were, but don't need to know what they were, as long as you restore the previous setting - it's unlikely you want CRLF moving forwards).
The rest of the script (lines 6 through 9) reopen the file you originally selected, sets the EOF to 0 (effectively wiping the file contents), then writes the CRLF-terminated text to the file and finally closes the file.
Note that some people might suggest using text item delimiters to break up the original text file on CRs but that would be wrong IMHO. The reason is that 'paragraphs of' can detect and handle both CR and CRLF-terminated paragraphs, leaving you with clean paragraphs into which you insert CRLFs.
This means that if the file originally had CRLF-terminated paragraphs you'd end up with the same data, but at least there was no harm done.
In contrast, if you simply searched for CRs and replaced them with CRLFs you could have the situation where you selected a CRLF-terminated file (maybe you didn't realize it was already in the Windows format) and your script would blindly replace each CR with CRLF, meaning you'd end up with CRLFLF combinations, which is very wrong.

Adobe acrobat 5 is not compatible with windows 7. Need replacement that will work.

adobe acrobat 5 is not compatible with windows 7. need a replacement that will work. any suggestions.

I would recommend Acrobat 10. You can find more details as well as a trial at http://www.adobe.com/products/acrobat.html?promoid=JOLIR. It should be noted though that Acrobat 5 is too old of a version to qualify for the upgrade price I am sorry.

Hi there, Is it possible to install ESXi 5.5 on a PC i5 3770K with windows 7, 64bits and motherboard asus Z77 ?

Is it possible to install ESXi 5.5 on a PC I5 3770K with windows 7, 64bits and motherboard asus Z77 ?

Hi(Bonjour)!
Here's the follow up:
I took a chance and installed MAC OS X 10.4.9 COMBO and QT 7.1.6 update, installed FCS 2 suite and my old TRV 340 still works perfectly.
I erased livetype included with FCE HD as suggested by apple tech note, and the installing process worked like a charm.
I keep my version of FCE HD 3.5.1 and original soundtrack . Both applications work well side by side with FCP 6.
Great.
Michel Boissonneault

Pavillion dv2000 with Windows 7 - Conexant hd audio

This HP Pavillion dv2000 did not come with Windows 7 when it was purchased, but was upgraded to Windows 7 two years ago.
Recently, Conexant hd audio on this laptop was accidentally deleted.
The downloadable Conexant hd audio on HP support page did not work because they only offer Vista and XP.
(No option to choose for Windows 7 because this laptop is quite a few years old.)
How to fix the problem?

You should probably get a conexant driver update show in windows update.
Also the Vista driver works fine on Windows 7 or at least it has for me on many dv2000 & 6000 series Notebooks (using one now).
If you have any issues just google your notebook model & audio driver for Windows 7 & you should find loads of possible help/solutions.
Like my post? Click Kudos (thumb+) to show appreciation.

Replace Windows 2003 DC with Windows 2012 R2 Foundation

Hi
We are a small office (7 users) that currently have one Windows 2003 Server configured as a domain controller running DNS,DHCP and file services for users. All computers (7) are joined into local domain. All users have mapped drives to 2003 server shares
and redirected (offline) folders for my-documents configured.
Due to an old hardware, we decided to buy a new server with Windows 2012 R2 FOUNDATION licence. For our company I thing this will be the best choice, since Foundation has CAL's 'included' in license, and for our requirements will be more than enough.
Foundation server limit is that server must be the root domain controller in a domain that has no trusts at the root of the forest. My question is how can we 'replace' old server with a new one (what are the steps) ? I'm thinking the following scenario:
- install server and promote it to a DC with a new local domain name in the new forest
- copy all data from old server the the new one
- put all computers out of old domain and put them back into the new domain that is running on 2012 foundation.
- power off old server
Most of the work will be with computers, that need to be reconfigured to a new domain ?
Is this the right approach, are there any other (better) options ?
Just thinking... Is it possible to join 2012 Foundation into existing domain, than transfer all roles from old server to the new one, and at the end demote old server and power it off (I know this is standard approach in Windows Server Standard editions
Thank you in advance
Mike

Hi,
There is no necessary to create a new domain. we can add the new DC to your current domain, then transfer FSMO, related settings and main service roles to the new DC.
Reference the link provided by Alceryes to add Windows Server 2012 R2 to your current domain. and then reference link below for
Active Directory Migration from Windows Server 2003 to Windows Server 2012 R2：
http://blogs.technet.com/b/canitpro/archive/2014/04/02/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Besides, for DHCP migration from 2003 to 2012, you can reference：
http://blogs.technet.com/b/canitpro/archive/2013/04/29/step-by-step-migration-of-dhcp-from-windows-server-2003-to-windows-server-2012.aspx
For DNS migration, install DNS server role on Windows Server 2012 R2, and configure it as secondary DNS servers to the old DNS servers. Do replication, once completed, change it from secondary to primary. Remove old server and also clear their record in
new DNS. Checklist: Migrate a DNS Server(also applied for WS 2012 R2), for your reference:
https://technet.microsoft.com/en-us/library/cc755303.aspx
It is better to do a test lab and backup related data before migration in your current environment.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Is motherboard 2AF7 compatible with windows 10?

HI. Is my motherboard HP 2AF7 compatible with windows 10? The computer is less than a year old and is currently running windows 8.1. Thanks

Looks like you don't have AMD drivers installed. Go here (http://support.amd.com/en-us/download/mobile?os=Windows%2010%20-%2064), download and install this driver. PM me if it works for ya

New PC with Windows XP, replacing XP. My PDF docs will not open

New PC with Windows XP, replacing XP. My PDF docs will not open and I am getting the following messages: EITHER Adobe Reader could not open ‘xxx.doc’ because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn’t correctly decoded). OR Word will now convert your PDF to an editable Word document. This may take a while. etc. Help please.

dibble wrote:
EITHER Adobe Reader could not open ‘xxx.doc’ because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn’t correctly decoded). OR Word will now convert your PDF to an editable Word document.
These are two completely different symptoms. Please explain exactly what you do when you get either of these messages. Also tell us your Reader version.

HP Pavillion dv6500 with windows xp pro AND NO audio Driver!

i have a hp pavilion dv6500 laptop entertainment pc here with me. It came with windows vista but i downgraded to windowx xp pro. it runs alot smoother! Everything works great except one problem? The audiio drivers that the hp websites has does not work? I cannot find the right audio drivers? I have tried even letting windows update search for the drivers with no luck? Why are the drivers on the website not working? How can i get this to work? if i upgrade it to windows 7 can i intergarde the vista drivers to work with the windows 7 program? i really need help! Thanks!

The General XP Downgrade Guide for HP notebooks is what you need to read. This well written guide has helped (at least!!) thousands of forum members downgrade their notebook successfully. There is a section that applies to your notebook.
The issue you are having probably is related to not installing the MSUAA driver before the device specific audio driver.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Hp pavillion dv6700 webcam problem with windows 7

I have hp pavillion dv6700, which had Windows Vista originally. I upgraded to Windows 7 and the webcam doesn't work amymore. When I launch Cyberlink Youcam, i get message " No video detected, please install camera" I have updated BIOS and all windows update and nothing works. "Image Device" in not shown under device manager. Please help

Hello Abzozo1. I understand you're getting the "webcam not detected" error.
What is the exact product number of the notebook? This document can show you where it is located.
Has the webcam ever worked since you upgraded the operating system?
To ensure that you have all of the software installed properly I suggest installing the HP Software Framework and HP Support Assistant. You can then run HP Support Assistant and it will automatically install any missing software. If that doesn't resolve the issue I suggest you take a look at my thread located here. This thread covers the common solutions to this error.
Take a look at that thread and let me know if any of the steps help.
Have a great day! I'll keep an eye out for your next reply.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Replacing overheated HP Pavillion DV9000 motherboard with Windows 7 capable motherboard?

Similar Messages

Maybe you are looking for