Replacing pictures in interactive slideshow

I am currently working on a CS5 InDesign interactive project. I have 3 thumbnail buttons which trigger larger pictures on the same page. All works fine when clicked in order, but I cannot go backwards (by clicking back to thumbnail 1 for example) and get the large picture to show again as it sticks on the last picture that was loaded. Would greatly appreciate a solution if possible.

Let me try to make sure I understand:
You have a theme already; you've created images that you want to use to replace the images in the theme you are using?

Similar Messages

  • Interactive slideshows

    Hi,
    I'm looking to make an interactive slideshow for my website. As a photographer, I would like to be able to have each categorical page of photos be easy to scroll through without clicking a large number of thumbnails.
    An example of what I would like to do is any gallery of photos at http://www.lynseyaddario.com/
    I want to be able to load all of the photos into a slideshow that viewers can click through or watch a timed slideshow of all the images.
    I have most Adobe programs, so if there is a way to do this outside Dreamweaver CS4, I'd be open to it.

    The jquery framework seems to be the most popular at the moment when it comes to slideshows and image galleries..
    Take a look at the following link and I'm sure you'll find a lot of possibilities:
    http://www.1stwebdesigner.com/resources/57-free-image-gallery-slideshow-and-ligh tbox-solutions/
    A few that are often recommended:
    Scrolling Images
    http://sorgalla.com/jcarousel/
    PrettyPhoto:
    http://www.no-margin-for-errors.com/projects/prettyPhoto-jquery-lightbox-clone/
    Nadia
    Adobe® Community Expert : Dreamweaver
    http://www.perrelink.com.au
    Unique CSS Templates |Tutorials |SEO Articles
    http://www.DreamweaverResources.com
    http://csstemplates.com.au/
    http://twitter.com/nadiap

  • Picture Titles  in Slideshow, different from filenames

    I want to add a different title to each picture in a slideshow, but don't want to use filenames for this purpose. How do I do that?
    My filenames work fine for filing, but are not suitable for enhancing a slideshow.

    I'm new to Lightroom, but am trying to set up my slideshow first session presentation. I want the filename to show with each slide for identification purposes. But, I can't seem to find where to turn the filename on/off. I'm sure it's a simple operation, but I sure can't find it at the moment!!!!
    Thanks,
    Jim...

  • Pictures quality of slideshow

    Hi all
    I have been trying to create a slideshow from my recent shooting using aperture 3, no matter what export format I chose, the quality of all the pictures in the slideshow dramatically decreases when playback from my iMac, even I chose the HD 1080p, the pictures turn out very blur.
    I thought this maybe because I used raw format, then I exported the raw to jpg and created a separate project to hold all the jpg, and repeated the whole slideshow thing, I still got the same results. Does anyone have the same problem and know how to solve this?
    One more question, I usually put raw and jpg into the same folder and then import into aperture 3, and I set raw as master. So, if i want to create slideshow out of these, which format is aperture gonna use for the slideshow, raw or jpg?
    Thanks
    Tony

    Hi Tony,
    Welcome to the user-supported Aperture discussion forum. Have you read Apple's terms for using this handy website? http://discussions.apple.com/help.jspa
    I have been trying to create a slideshow from my recent shooting using aperture 3, no matter what export format I chose, the quality of all the pictures in the slideshow dramatically decreases when playback from my iMac, even I chose the HD 1080p, the pictures turn out very blur.
    How are you exporting your slideshow? I'm not familiar with the functions to export a slideshow.
    I thought this maybe because I used raw format, then I exported the raw to jpg and created a separate project to hold all the jpg, and repeated the whole slideshow thing, I still got the same results. Does anyone have the same problem and know how to solve this?
    Are you indicating that you have RAW files in your Aperture library, and then you exported them to a temporary place as JPG, and then re-imported them as JPG into Aperture, and then recreated your slideshow using the "new" photos in your Aperture library? Your photos won't be blocky because they were generated from RAW in general. I'm not sure of your workflow here, though.
    One more question, I usually put raw and jpg into the same folder and then import into aperture 3, and I set raw as master. So, if i want to create slideshow out of these, which format is aperture gonna use for the slideshow, raw or jpg?
    It will use whatever photo you have chosen to be the master. If you are importing RAW and JPG together and they are stored together (based on your import options), you will see a little badge with an "R" or a "J" in the lower right corner of the picture. These badges mean that the RAW or JPG, respectively, of a RAW/JPG pair is being used as the master, and Aperture is storing and ignoring the other one, depending on your specific import option.
    nathan

  • Interactive Slideshow to DVD?

    Is there any way to take my Quicktime interactive slideshow made by Keynote 2 and burn it to DVD so I can control the Keynote with the DVD player remote?
    I would just like to give a Keynote through the dvd player, but so I am controlling it and it is not just a movie playing.
    Thank You in Advance!

    nope, iDVD doesn't support chapter stops. The only way it would work is if you build long pauses in your slides between each build and hit the pause button on your remote every time you want to STOP the action. That would get old pretty darn fast.
    Or you could wait for Keynote 3 and pray Apple sees fit to give us instant DVD publishing from Keynote. No idea if that'll ever happen though.

  • Choosing pictures in senseme slideshow.

    How can I choose which pictures to show in senseme slideshow when using smartconnect. When daydream is inactive. Only pictures taken with the camera is shown. If I acticivate daydream all pictures in the picture folder show. I want to choose the pictures to be shown. Is this possible, if so, how do I do it?

    I'd like to be able to disable the "SenseMe™ slideshow"
    I don't like the fact that I can't control what images appear on the slideshow and some of the pictures I've received from MMS and other apps are pictures I don't want to appear on the slideshow
    another post http://talk.sonymobile.com/t5/Xperia-Z1-Z1s/Choosing-pictures-in-senseme-slideshow/m-p/434353 has confirmed pictures can't be selected for the "SenseMe™ slideshow"

  • Why don't pictures from a slideshow made in iPhoto and then burned on to a DVD in iDVD not use the full screen?

    Why don't pictures from a slideshow made in iPhoto and then burned on to a DVD in iDVD not use the full screen?

    All I want to do is send my family the pictures for them to be able to see them on most dvds and use manually control.
    If you want set top DVD player playback, I suggest you create a a series of slideshows IN iDVD that each contain a MAXIMUM of 99 images. Do not create the slideshow in iPhoto or iMovie.
    Is there an easier way to do this, bypassing iDVD?
    Some DVD players will play a disc containing jpeg images

  • Export Issue - QT Interactive Slideshow - Same Problem for Years

    Come Apple... give us some real tech support for your software... like Keynote (Live support is equipment centric).
    I had this same issue over a year ago, reported it... and latest upgrade doesn't fix.
    Issue:
    - Export Keynote file as QuickTime Interactive Slideshow
    - Works perfectly on desktop
    - When played in browser... it loops at start, no matter if [first slide] is set to Manual ("On Click") or "Automatically After Transition". No matter if "local", or from my web host.
    - Happens SPORADICALLY... Yes... some files work, most don't. Also, different behavior in different browsers (Safari, Firefox). Who knows what's going on with 92% of the rest of the world (i.e., Explorer).
    Anyone here have any suggestions... Steve Jobs email address?

    Follow the below mentioned settings and check.
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
    Now observe the connection.

  • How do I restrict access to home screen during interactive slideshow?

    I want to set up a slideshow, of sorts, in which people can access a variety of pictures (some of which will have captions and info relating to content), easily navigate between them, and have the pictures in an organised format/a format that is easily navigated. The question I have, is how to make it so that people can't come out of the program/slideshow and into the home screen or anything else on the ipad. It will be part of an interactive display.
    Any help/info would be appreciated.
    Thanks

    Put some duct tape over it.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Amount of pictures allowed for slideshows?

    Hello everyone. I was wondering if someone might be able to help me with my question. I'm thinking about buying photoshop elements 8. One of the main reasons is for slide show making. Does anyone know how many pictures can be downloaded per slideshow? Also, how many songs can be downloaded per slideshow. I've been using Photostory, and they only allow 300 pics max. I was just wondering if photoshop elements 8 allowed more?
    Also, while I have you here, is this program good for slideshows, or would you reccomend a different program?
    Thanks so much in advance for all of your help!
    Rich

    I have used Photoshop Elements to make slideshows - but I would not say that it is good for making slide shows and I would not recommend purchasing it specifically for making slide shows. 
    -- I don't think there is a specific limit on the photos in a PSE slide show : however, many people do encounter effective limits based on the hardware and software configuration of their PC/laptop. There have many posts on these forums where people failed at 200 - 300 photos.
    -- You did not say how you will use this slide show. You should be aware that if you wish to create a TV playable video DVD (MPEG2) you most probably will need to also purchase Adobe Premiere Elements.
    I suggest that you also post your question on another forum like elementsvillage.com which has photo and slideshow discussions about software other than the Adobe products.  ProShow Gold is a product I have seen recommended and hopefully someone at elementsvillage forums can give you guidance . I suggest that you post in their General Elements Discussion subforum.

  • Replacing pictures in albums?

    I'm sure this has been covered more than once, but I'm must not be searching the wrong terms . . . Anyway, I just upgraded to iLife06 from 04. Things are fine for the most part, but the last few photos I added before upgrading are now being replaced by other pictures within my albums. I deleted the newly imported pictures and re-imported them (only about 40 of them). Everything looked fine, but I closed iPhoto and reopened it and noticed that some of my newly imported photos that were in my library were missing from my newly created album, and some photos had been replaced with old ones (for some reason iPhoto likes replacing new pictures with ones from 2003). I closed iPhoto and reopened again and it asked if I wanted to import 42 photos that had not been imported last time. I said no, and now the photos are gone. I have gone through this twice. Any suggestions? Thank you.
      Mac OS X (10.3.9)  

    stanowy:
    Welcome to the Apple Discussions. Sounds like the thumbnails data files are messed up so you might try rebuilding the library by launching iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options and omit the orphaned files one.
    Before doing so, make a backup copy of the iPhoto Library folder (select and type Command-D). In the original folder move the three thumbnail data files, Thumb32Segment.data, Thumb64Segment.data and ThumbJPGSegment.data, to the desktop and then rebuild. This will give you new thumbnail files, thumbnail data files and new library data base.
    If that doesn't work I do have a workaround for creating a new library from scratch and keeping the keywords. Starting over with a fresh library and fresh import of your original and modified files (if there are those that you want to keep the edited version) from the old library should give a good working library. If you're interested post back and I'll post the link to the tutorial the workflow.

  • Pictures in a slideshow

    Hello everybody,
    can I put a picture slideshow into my iWeb page?
    Are there any different possibilities?
    I just found some specific discussions here so I started this one to get an allround-information.
    Best regards

    See this page for the difference between a banner and a slideshow...
    http://www.iwebformusicians.com/Banner-Slideshow/Banners.html
    This section of iWeb for Musicians shows several types of banners and the slideshows start here....
    http://www.iwebformusicians.com/Banner-Slideshow/Slideshow-Showcase.html

  • How do you change the pictures in your slideshow?

    I am setting up a slideshow where I will update the pictures as new projects are completed.  I cannot seem to remove old pictures to install new ones.

    Hi,
    If you are using a slideshow in which you are not showing the thumbnails, then while changing the slideshow images you need to show the thumbnails in the design view by checking the option for it ( Please refer to this screenshot :- http://prntscr.com/4y6nco )
    And then you can delete the images that you want to change by deleting their respective thumbnails and then add the new images.
    Also, if all you want to change is the images used in your slideshow , then you can also use do this online after your site is published using the "In-Browser Editing feature" available in Muse.
    Please refer to this link for more information on In-Browser Editing :- Adobe Muse Help | In-browser Editing of websites using Third-party Hosting Service Providers
    Hope this helps
    Regards,
    Rohit Nair

  • Interactive slideshow with JPGs

    Hi Flash experts,
    I have to build a Flash project. The challenges are:
    1. Preload 5 JPG images onto a movieclip container
    2. Produce a slideshow which loads the 5 external JPGs
    3. Autoplay and transition between pictures
    4. Have 5 buttons to go straight to the relevant image on the
    slideshow and
    smart enough continue playing the slideshow from that point
    5. A clickable area within the slideshow image to display the
    larger version
    of the image (can use emptymovieclip actionscript function)
    6. When user click to open the large version of the image,
    the
    transition/autoplay should pause and continue when it closes
    I have done the first 3.5 points of the challenge but stuck
    on the rest. If
    anyone can suggest or direct me with an approach or example
    to solve this
    challenge that would be very much appreciated.
    Thanks.
    Jay

    That QT button behavior won't do what you want. It does a lot different things but its not designed to move one frame forward or back. A behavior like this wil do the job. Depending on your QT movie, you may need to adjust the number of frames that are moved each time the button is used. This is the next frame behavior:
    property QTSprite
    property thisDuration
    property thisMember
    property customCursor
    property thisSprite
    on getPropertyDescriptionList
      myPropList = [:]
      myPropList.addProp(#QTSprite,[#comment:"enter the Quicktime sprite number:",#format:#integer,#default:""])
      myPropList.addProp(#customCursor,[#comment:"pick a cursor:",#format:#cursor,#default:280])
      return myPropList
    end
    on beginSprite me
      thisSprite = me.spriteNum
      thisMember =  sprite(QTSprite).member
      thisDuration = thisMember.duration
      sprite(thisSprite).cursor = customCursor
    end
    on endSprite me
      sprite(thisSprite).cursor = 0
    end
    on mouseUp me
      if sprite(QTSprite).movieTime < thisDuration then
        sprite(QTSprite).movieTime = sprite(QTSprite).movieTime + 1
      end if
    end
    and this is the previous button behavior:
    property QTSprite
    property thisMember
    property customCursor
    property thisSprite
    on getPropertyDescriptionList
      myPropList = [:]
      myPropList.addProp(#QTSprite,[#comment:"enter the Quicktime sprite number:",#format:#integer,#default:""])
      myPropList.addProp(#customCursor,[#comment:"pick a cursor:",#format:#cursor,#default:280])
      return myPropList
    end
    on beginSprite me
      thisSprite = me.spriteNum
      thisMember =  sprite(QTSprite).member
      sprite(thisSprite).cursor = customCursor
    end
    on endSprite me
      sprite(thisSprite).cursor = 0
    end
    on mouseUp me
      if sprite(QTSprite).movieTime > 1 then
        sprite(QTSprite).movieTime = sprite(QTSprite).movieTime - 1
      end if
    end
    Try these and see if they work for you.

  • Adding Picture To Completed Slideshow

    Hello, everyone! I created a slideshow with iPhoto 09 & imported it to iDVD 7.1.2. Everything worked out fine except that I forgot to include a photo. Is there any way I can add the photo to the (almost) completed slideshow in iDVD. Dragging & dropping didn't seem to work. I'm running Snow Leopard OSX 10.6.8. Thanks in advance!

    hi, without actually testing, I am quite sure you cannot.
    Is there a problem going back into iPhoto and adding the last picture?
    If you do that, don't forget to start a NEW project in iDVD instead of using the "update project" feature. It simply doesn't work. don't even try. things get screwed up.
    good luck!

Maybe you are looking for

  • What is best filter to change the brightness of a clip?

    I am working with a video footage that was shot with no light on and the footage is kind of dark. Is there a filter that can be used to make the clip look brighter. I've tried using the brightness filter but when used the clip does not look rite. It

  • Is this a bug? Time Pitch Machine Changes Gain Levels

    Logic Pro 9.1.4, macpro dual quad 2.93mhz, osx 10.6.8 i'm altering the 'speed' of some of my 88.2khz aif files by a very small amount using Time and Pitch Machine, in Classic and Free modes ( -1.3% / -22cents apprx) but to my surprise i noticed that

  • I can't make or receive calls please help ?

    I have iPhone 4. and today morning i found that I can't make or receive calls please help ?

  • Scripting Flash

    I have not been able to find a scripting forum for Flash, so please forgive me if this is the wrong forum... Some of you might have noticed the existance of Script Bay. It is a free panel for writing and running scripts and it works in the many of th

  • Import and export module pool

    Hi all, I need to import the module pool or dialogprogram and then export it to another . say from sand box to dev . I cannot do it through transports . I need to transfer everything including the screens. Any help would be greatly appreciated. Thank