Replacing Restore DVDs?

Is there a way to get a replacement copy of the restore DVDs for my computer? I tried booting from the restore DVD, but upon ejecting the disk, I noticed that this disk had gotten badly scratched up from last week (when I went to apple hillsdale, I put the DVD in a Jewel case, but it must have gotten damaged on the way home!)
(P.S.) I have AppleCare extended warranty, and I wonder if this is covered? I will find out at 7:15 am!

I don't think it will be covered under warranty, but if you contact Apple they will provide a set of replacement disks for a nominal charge.

Similar Messages

  • How can I replace a damaged Tiger (intel) restore DVD

    Hi,
    How can I replace my damaged Tiger (intel) restore DVD for a Mac Mini. The version of Tiger in the shops is for PPC, the restore DVD that came with the Mac Mini is now covered in scratches and will not work.
    Kind Regards,
    Dave.
      Mac OS X (10.4.10)  

    Welcome to the forums!
    Install DVDs are for Tiger are specific to the model and build of your mac, so getting one at the store won't work anyway.
    Contact AppleCare, explain the problem, and they will send you a replacement. You'll need your serial number (look in System Profiler), and you will have to pay a nominal charge for shipping/handling.
    Hope this helps...

  • How to restore HP factory defaults without system restore Dvds if Win7 is formatted?

    I recently encountered a problem with pre-installed win7 in HP Pavilion Dv6 6121se laptop after replacing the old battery. The hard disk had three partitions: C, D & E. By default the windows was installed on C drive. The following operations were performed in sequence:
    1-      Using Partition Wizard 7, I decided to format C drive with the idea to re-install the OS from recovery partition. I accidently changed the recovery partition from "Primary" to "Logical" during this process. Soon I learnt that the system recovery (F11) wasn’t functioning followed by this  message: No bootable device - - insert boot disk and press any key
    2-      I made a system repair disk from another laptop to overcome the above issue. It didn’t work,  so I then decided to merge the C, D and  E partitions using AOMEI Partition Assistant Professional Edition. The status of the hard is asunder after merger:
    Partition            File System          Capacity        Used Space        Free Space            Flag                     Status
    C: SYSTEM           NTFS                     199 MB         13.8MB             185.2                    Primary                  None
    D: Data                NTFS                     451 GB           99.8 MB           450.9 GB              Primary                 None
    E: Recovery        NTFS                    14.45 GB      12.87GB             1.58GB                 Primary               System
    F: HP_Tools        FAT32                  103MB           15.5MB             87.5MB                Primary              System
    Here comes the problem:
    A)      When C: SYSTEM is set as active partition, I get this message on startup
    BOOTMGR is missing
    Press Ctrl+Alt+Del to restart
    B)       When E: Recovery is set as active partition (or tapping F11), I get this message on startup
              Windows failed to start. A recent hardware or software change might be the cause.
               File: \Boot\BCD
              Status: 0xc0000098
             Info: The windows   boot configuration data file does not contain a valid OS entry.
    Please bear in mind that I didn’t make any system restore DVDs in advance which could have been used at this stage but I do have the default recovery partitions intact in hard drive as shown above. After all this, is there any way to retrieve my system to factory settings without losing recovery partition and HP tools?
    Thank you all!

    Try download a PE system and get in there and run an WIM tool to install windows to C
    (Look for base.wim in the recovery partition and install it)
    Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
    **Click the White thumb if you like the answer.**
    **Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
    Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

  • Missing Mac Mini Restore DVD disk 2, need to Cancel Installation

    hi, I'm a Mac newbie. I recently bought a mac mini from someone. Unfortunately, I didn't realize at the time that there should be 2 restore dvds instead of just one (I thought the Os X Tiger drop in dvd was the 2nd dvd).
    I'm trying to reinstall the OS X along w/the software b/c I ran into some problems with the Mac mini. But when I get to the screen that says, "please insert Disk 2", I have no disk 2. I can't cancel the installation b/c the Cancel button is grayed out. I tried shut down and restart the computer from disc one directly, but after click through a series of Next buttons, it only leads me to the same screen.
    Now I can't use my Mac mini at all. Short of fork over $40 for a replacement dvd from Apple, is there anyway I can restore to the previous point prior to my attempted installation/cancel the current installation?
    Much thanks in advance.
    Mac Mini 1.25 ghz   Mac OS X (10.4)  

    "is there anyway I can restore to the previous point prior to my attempted installation/cancel the current installation?"
    No, sorry. That is not a feature of Mac OS.
    If you have an Apple retail store nearby head on over there, explain your situation and see if they'd be willing to copy the 2nd disc for you.

  • Missing SOftware Restore DVD's

    Hello.
    I have a white MacBook that I bought last year (March 2008), and I lost the restores DVD's that came with the computer.
    I read many forum post and it seems there's no way to get those DVD's from Apple (I don't have Apple Care).
    My question is:
    What's inside those DVD's?
    If I buy Mac OS X v10.5.6 Leopard and iLife 09, do I need any additional software that is inside those DVD's?
    I have a friend that has the DVD's, is possible to make a backup copy? How can make it?
    Thank you.

    Even if you don't have AppleCare, you can call up Apple and they'll send you replacement discs for a nominal fee. This is far less expensive than a retail copy of Leopard+iLife.
    I believe buying a retail copy of Leopard+iLife would be enough, but I'm not completely certain. I do know that you wouldn't get a copy of the Apple Hardware Test, but I'm not sure what else would be missing.
    You can't use a friend's discs as the restore DVD's are machine-specific.
    ~Lyssa

  • Restore DVD Question ?

    hi all. i recently switched to Mac from a PC by buying a MacBook Pro off of craigslist. Only problem is that the guy i bought it from did not restore my mac to its orignal settings before he sold it to me and now i have all his extra bull on my HD. At the time i bought it, i didnt know i needed the Restore DVDS in order to restore the mac, and now he wont even pick up my calls. I've looked online to find the correct DVDs to use, and i was wondering if yall could tell me if these are the right DVDs that i'll need. Here is my Mac info:
    Hardware Overview:
    Model Name: MacBook Pro 15"
    Model Identifier: MacBookPro2,2
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.33 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache (per processor): 4 MB
    Memory: 2 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MBP22.00A5.B07
    SMC Version: 1.12f5
    Serial Number: W86522ZNW0H
    Sudden Motion Sensor:
    State: Enabled
    *and here is the link to the discs that i am considering on buying:*
    http://www.ifixit.com/MacBook-Parts/MacBook-Pro-15-Inch-Core-2-Duo-Restore-DVDs/ IF185-065
    *anyone know if these are the correct ones? thanks.*

    Welcome To  Discussions jmontalbo!
    If you can call Apple Customer Service 1-800-767-2775, and provide the serial number and MacBook Pro system specifications, you can order of set of replacement system discs, for an amount, which is probably lower than that quoted price.
    And you will know that you have the correct discs.
    ali b

  • How do I get replacement restore discs

    how do I get replacement restore discs for a 15" MBP 2010 dual core i7 2.66
    thanks

    You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.

  • Need to format new HD but lost restore DVDs

    I just bought a new MacBook Pro 13" laptop. I also bought a new 500gb WD Scorpio Blue hard drive at the same time. My plan was to swap out the stock 160gb HD, and install the 500gb drive, and then format, install Leopard using the Apple Restore DVD, and then use Migration Assistant to transfer files etc from my old MB.
    The problem is my wife threw out the MBP box, which contained the Install/Recovery DVDs. Doh. Now I do have a retail Leopard disc (and retail iLife 09 disc) that I bought to update my old MB a few years back. Can I use the Leopard disk to setup the new HD on the MBP 13"? Will I run into any issues regarding drivers or specific files that are on the factory Restore discs but not on the retail Leopard disc? Am I better off going to the Apple Store and trying to get replacement Install/Restore DVDs?
    Thanks

    Another option is to purchase an inexpensive external SATA enclosure. You can just put your new drive in the external enclosure and use either SuperDuper (free for full clones) or CarbonCopyCloner (completely free... but accepts donations) to clone your internal drive to your new one in the external enclosure. After you complete the cloning process... restart your machine holding down the "Option" key. This will bring up a screen that will let you select your startup disk. You would then pick your external drive (you need to actually press the mouse button here... if you have "tap to click" enabled, it won't work at this point). This will launch your OS from your external drive. Note it will be a bit slower as the USB/Firewire bus is somewhat slower than your internal SATA bus. Try it out a bit to make sure everything is working okay. Then you can just swap the drives... putting your old one in the external enclosure as a backup. NOTE: There have been quite a number of issues reported with third party drives... the Scorpion Blue in particular. This is related to firmware 1.7:
    http://discussions.apple.com/thread.jspa?threadID=2054387&start=0&tstart=0

  • HT2471 install and restore DVDs for a macbook pro 5.1

    hi i have a second hand 15" macbook pro 5.1 model A1286 and would like to get a set of install/restore DVDs anyone help? i am new to Apple have always used a windows pc and after trying the Mac love it!!

    Your Mac shipped with discs for Mac OS X 10.5.5. You can call Apple and likely get replacement disks for it. Note that you can upgrade your machine (late 2008) to the latest version of Lion if you like. You do need to get the original set of discs, though. I don't know how much they would run. That would have been Leopard - I wouldn't try getting the discs from Amazon ($250 or so) - I'd try Apple first.
    Clinton

  • MacBook Restore DVD

    I need to restore my system and I lost my restore DVDs. Can I use someone else's restore DVDs who has that same model MacBook, as long as we have the same processor? For example, I have the Black 2.0 GHz MacBook pre November 1st upgrade and they have the White model pre November 1st upgrade. Can I use their restore DVD's to restore my system correctly? Please help!!! Thank you.

    I'm sure that would work. It's probably against the EULA though. You should contact Apple and explain your situation. Don't quote me but I believe they'll send you replacements at a very reasonable cost.

  • How to find a restore dvd for MacBook Pro A1278

    I will be helping my neice with a MacBook Pro,13-inch, Mid 2010, with a failed hard drive. (She tells me that the the system does not recognize the hard drive.) I have a SATA hard drive we can use, but she can not find the original restore dvd.  How can I find a replacement?      
    Any other suggestions on how to proceed?
    Thanks.

    Phone AppleCare and order replacements. You'll need the computer's serial number and a credit card number.
    (100875)

  • Order replacement boot dvd

    I know there is a place on Apple's site to order a replacement install DVD that came with a MacBook. I was there yesterday and I can't find it now. Anyone know where to go?

    Call AppleCare to order replacements for your software restore discs.

  • Wont boot from restore dvd's or new copy of Leopard!!

    Well I am witts end I have an isight that I installed a new hard drive on and will not boot from the restore dvd's, or a new leopard disc(now i am out 130). It will how ever boot from drive genuis(new drive is fine) or restore dvd's from a new iMac and it will tell me that disc's are not compatible(duh just checking to see if it was a bad optical drive) any suggestions or ideas are welcome!!!

    "Well I am witts end I have an isight that I installed a new hard drive on"
    The iSight models are not user rerpairable except for RAM installations. All other repairs should be done at a repair shop. Apple does not even supply repair manuals (DIY) for the public for the iSight models.
    If you installed the HD yourself, its possible it was not installed correctly.
    Just a thought..............

  • Mac mini 2011 a1347 restore DVD

    Hi, I have a 2011 Mac mini and where I live now I haven't a good internet access, now I have to do a full restore and it asks me to download it from the internet but that's impossible me to do because 1giga files could take months to download, I also brought long time ago a snow leopard DVD and tried to install on the Mac mini with no luck, it doesn't even boot.
    Need to know if you can send me the default restore DVDs for that model of Mac mini, thnxs.

    Depends on what is being called a "2011" Mac Mini.  If it was purchased before July 20, 2011, or does not have the hardware or firmware revisions of July 20, 2011, then it is not a mid-2011 Mac Mini, and a system specific 10.6 installer disc would be available to it.  Otherwise, that's correct, you must have a high speed internet connection somewhere to get the software, if you don't already have it.
    As you'll see here:
    http://www.everymac.com/ultimate-mac-lookup/?search_keywords=A1347
    Refers to 2010,2011, and 2012 Mac Minis.  We'll need you to verify your have a Mac Mini 5,1 or later to decide whether or not you need the high speed internet.  If you do, according to the System Profiler, then find yourself a place with high speed internet.

  • How can I get a replacement internal DVD drive?

    I bought a refurbished Toshiba P55t-A5202 a few months ago.  The internal DVD drive seems to be failing and doesn't always recognize dual-layer DVDs.  Some DVDs recognize and play fine.  Others aren't even detected and the system thinks no disk is in the drive.  I would like to replace the opical drive.  I am comforable opening up the sytem and swapping the drive, I just don't know where to buy the replacement part.  
    Does anyone know who to contact about getting a replacement internal DVD drive?

    Hi, and welcome to Apple Support Communities.
    Which exact iBook model is it?
    You can choose from this list:
    http://www.everymac.com/systems/apple/ibook/index-ibook.html
    Apple may not have the replacement discs at this point, but it's worth a try. You could try giving Apple a call and see if they have them available. If they do, they will send them to you for a fee.
    You will need the serial number of the iBook when you call.
    http://support.apple.com/kb/TA27282?viewlocale=en_US
    Good luck.

Maybe you are looking for

  • ITunes sharing with multiple users on one iMac

    I have a sizeable library that I would like to consolidate on our new iMac and allow four users (my family) to use the one library in their respective iTunes. There was a post last year for a solution to use aliases to accomplish this and I followed

  • Array/ In Ref cursor

    Hi all, I need to create a stored procedure which takes 30 arguments. However specifying them will become very messy. Is there a shorter way to pass in so many arguments? Perhaps an In Ref Cursor or an array? Any help would be much appreciated. Thank

  • Unhappy with update changes

    The update has caused multiple new issues on my DVR.  I hope that Verizon is working quickly to resolve these matters.  I would appreciate any updates that VerizonFios can provide. 1.  My recordings now taking up more space on my DVR.  My DVR is now

  • Can't open any app after upgrade

    Just updated my 3gs to ios 5.  Now,no 3rd party apps will open. They all quit immediatey.    Another person who I know has th same problem. Anyone know of a solution?

  • Agilent E8362B

    how to use labview with gpib to connect with Agilent PNA E8362B ?i am newbie ..just started to work on labview about a fortnite bck and +i am a novice in interfacing(networking... jst know tidbits) skill ..so plzzzzz explain me in a litle detail