Replacing ribbon cable cover flap on HP OfficeJet Pro 8600 Plus

On the above printer I was trying to close the lcd flap and somehow knocked off another little flap thing underneath which i didn't even know was there. I'm guessing it's a flap that comes out to protect the ribbon cable underneath, but I cannot figure out how to replace in in such a way that it stays folded out while the screen is lifted up. Thanks for any info.
BH

Hi Bluehorseshoe68,
Welcome to the HP Forums!
I have read your post on a program ribbon on your Officejet Pro 8600 Plus, and I would be happy to assist you!
Because one of the parts on your printer has physically broken off, I would first recommend speaking to our technical support for replacement/ repair options. They can be reached at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
You can also try to reach HP Parts Direct to see if they have the cover you need for your front panel. Their phone number is 1-800-227-8164. I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

OfficeJet Pro 8600 Plus Wireless DOES NOT WORK with Mac Mavericks Based Network

Replaced my Brother system with the HP OfficeJet Pro 8600 Plus yesterday. There are many positive features of the 8600 Plus that prompted me to purchase it...
Modular Design
Large legal sized Scanner
Standard/Legal Paper Printer
Copy
E Print Capability
High Yield / Affordable Toner Replacements
Unfortunately, I discovered the Wireless network capability is less than desirable. After hours of installing, reinstalling, work arounds, internet solution searches, it just will not work. If you are able to get the printer to work on your network (with router), the scanner will not be visible, vice versa, etc...etc...etc...
HOWEVER, I did discover this solution. If the unit is near your base computer, install it to your computer with a usb connection. That allows you to have scanning and printing from that unit. Then you can connect the unit through its ethernet connection to your router. From there all computers can print within your network. It's not the best way to connect a WIRELESS printer, but at least it works.
I'm not certain why HP and Apple can't find a solution, but I never found anything on the net that worked. The problem seems to stem from the new Mavericks update from Apple, but I'm really not sure. I wasted an entire day of productivity attempting to make it work. I'm posting this so you don't make the same mistake. If you happen to know a verified solution, then I would welcome the information. Best of luck!!!

It may be a mac driver issue. Try installing the bootcamp update for your version of vista from here:
http://www.apple.com/support/bootcamp/
I'm not sure if this is supposed to work since I've never tried mac hardware at 5ghz on windows before...

Officejet Pro 8600 Plus wireless printing dilemma

Hello,
I recently purchased the Officejet Pro 8600 Plus for my dorm room in college. However, the school requires all devices that want to use its wi-fi to register their IP addresses through detection software in addition to the default log-in information just to use the wi-fi. Now, here are the items I currently have:
- the printer itself
- the printer USB cable
- a few ethernet cables
- a personal router
- an ASUS wireless dongle (plugs into PCs via USB, has ethernet port but the device itself can create a hotspot and its own "network")
- one of the built-in school routers (high up on the wall)
The question is, is there a way I can set up any type of wireless printing in my dorm room? Is it possible to buy two wireless USB attachments that hook up wirelessly to my printer and computer, acting like bluetooth? Thank you!

Range extender improves the signal strength and cover a bigger area, but adds an extra layer of communication so will have slower response. It helps connecting devices far apart, but may cause delay and "loss" of communication, especially "two way" communication which is the problem you are experiencing.

OSX 10.8.5 CS5.5 & HP Officejet Pro 8600 Plus

I bought the HP Officejet Pro 8600 plus believeing it is MAC OSX compatable however upon trying to scan into Adobe CS5.5 suite of applications I was not able to scan into any of the Adobe CS programs. I can scan from the scanner into a PDF that the HP printer makes and place it in a folder on my computer but I cannot Scan directly into Adobe Acrobat X or any of the CS5.5 programs.
After a few hrs of searching I found on the user manual on page 50 the following
"The HP Scanning Software does not support TWAIN and WIA scanning on
computers running Mac OS X."
I need to know if this issue has been resolved and if so what is the solution or workaround to scan directly into Adobe Acrobat, Photoshop, Illustrator, Indesign or any of the other Adobe CS5.5 master suite collection.
From what I have read it seems that there are two issues here
1 most programs are moving away from twain and WIA in favor of something else forget what it is and HP moved on but did not consider backward compatability important so they didn't include what is needed.
2. Adobe could use a patch for this other format
If there is no current solution I will return the MFP (multi-function printer) and look for a replacement. I would appreciate any reccomendations from the community for an MFP that works pain free with Adobe CS5.5 and Mac OSX.
Looking for high quality scan with document feeder and flatbed, photo print capability does not need to fax.
Thank you your assistance.

facman
I am linking you to an HP Support document titled “Uninstalling the Printer Software” below. I am also providing you the link to the HP software for your printer titled “HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8” below as well.
Follow the first document and uninstall the software. Reboot the computer than download and install the linked software. This should resolve your issue.
Uninstalling the Printer Software
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02259020
HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
http://ftp.hp.com/pub/softlib/software12/COL44234/mp-107214-1/Officejet-Pro-8600_v12.23.0.dmg
Please feel free to re-post if you have any further questions or concerns we are here to help.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

PDF from Google Apps gmail/gdrive by Cloudprinter failed on HP Officejet Pro 8600 Plus e-All-in-One

Dear forum contributors,
1. HP Officejet Pro 8600 Plus e-All-in-One
2. Linux OpenSuSE 12.2 64-bit
3. Failed , after the failed message is a very long URL to my gmail attachment.
4. This issue occured from the beginning, I have this printer only for one week.
When I print different kinds of PDF's from Google Apps (gmail and gdrive) by Google Cloudprinter I got a failed message at the HP eprinter Recent Print Jobs list.
Other prints from Google Cloudprinter, for example a webpage or a Google Docs document (not PDF) is working fine.
Also sending the same PDF's directly to my @hpeprinter.com e-mail address is working fine.
Is this a problem by Google Cloudprinter or HP e-print? How to solve the problem?
Thanks for helping,
Jurjen

After much research, I was unable to obtain a direct answer for two reasons: HP doesn't support Linux or Cloud Print beyond initial setup. I was not very satisfied with this answer as I knew you would not really be either so I found some links and this may be the last I can provide any assistance here due to the two reasons above. These links cover everything and should provide for you additional links to all of your questions I believe.
--Serving a Printer to Google Cloud Print from Linux--
--Google Cloud Print on Linux--
--Installing Google Cloud Print on a Linux Server--
Otherwise, if ePrint is not working within the apps using a Windows-based computer I am more than happy to assist you. You may continue to get support here from other community members regarding Linux but I may not be of much assistance. I can say the first place to check is www.eprintcenter.com and see what the error messages say there under the print history, cancel any pending print jobs and try again. Keep me posted on any additional information you may want to add regarding a Windows PC, otherwise I should direct you over to some great support provided by Google Cloud. Linux is suppose to work with these functions so I will leave you with this final excerpt from a Cloud Print Help site:
"Why is my document not printing?
1. Make sure your Google Cloud Print connector is running on a computer with Mac, Windows, or Linux.
2. If you're using Windows XP, make sure you also have the Windows XP Service Pack 3 (SP3) installed.
3. Confirm that the computer connected to your printer is powered on and that you are logged in."
This printer should support this feature so to make sure, you can log into www.eprintcenter.com and select ePrint Settings under the customized email address on this page and ensure you have Print Services ON. I wish I could be of more assistance however. I strongly recommend contacting the manufacturer of the apps you are having the problem with as these functions work when you use them like ePrint was intended (via email and mobile devices). Good Luck!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

Hi I have just replaced my black XL cartridge and was asked to share info with HP on my
HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g
part of that info gave details to HP of the actual amount of prints so I'm really interested to know what the number of pages I printed off is
does anyone know a way I can find this info out please?
thanks
This question was solved.
View Solution.

Touch the front panel and use the back arrow if needed to get to the home screen. Next touch the four ink droplets at the top right of the screen, then touch "Print Report". Items 12-14 will be the total pages, color pages and borderless pages printed.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Officejet Pro 8600 Plus won't print or scan wirelessly using Mac OS 10.

Mac OS 10.9
Wireless
My printer was working fine until today. Then when I used the control panel to scan a page I went through the steps and got to scanning and got the message I needed to enable "Scan to Computer" in the HP Utility. I went there and it was unchecked. Seems I had this problem every time I did a new scan job in the past. It wouldn't retain than check. So I checked it and after awhile I got the message "Communication Error" and to check my connections and if that didn't work restart my computer and printer. I did that and also restarted the router but it didn't help.
Then I tried printing from Word, which has always worked but it didn't this time. The printer icon on the right of the dock came up, bounced a few times then disappeared with nothing happening on the printer.
So I deleted and reinstalled the printer. No help. I downloaded and installed HP software and firmware updates. No help. I went through wireless setup. No help
BTW, all along I got good "Wireless Network Test" results. I says it's connected but nothing happens when I try any functions of the printer.
If I can find a USB cable I will try to see if wired works.
Any suggestions would be appreciated.

Hey @neoflyer,
I would like to assist you today with resolving the wireless printing and scanning issues you're experiencing on your HP Officejet Pro 8600 Plus e-All-in-One Printer on your Mac OS X 10.9 Operating System. You mentioned that you have powercycled the devices, reran the wireless setup, and uninstalled and reinstalled the software and drivers to no avail. I'm going to suggest a few additional troubleshooting steps to verify if this is a computer issue or a network issue.
Step 1: Gather the IP and Open the EWS:
1. On the screen of your printer select the wireless button:
2. Under the Wireless information you should see your IP address
3. Open up your internet browser on your Mac computer and in the website address bar just type in your IP address. Please do not include www.
4. After you enter your IP address in the website bar go to that website
5. If the website for your printer opens than that proves with 100% certainty that your printer and computer are 'talking' to each other on your wireless network. If the website fails to open than you have a network communication issue with your router.
If the website fails to open please powercycle your network again:
How to Properly Powercycle a Network:
First, unplug the power cable to your Router
Once your Router is unplugged, turn off your printer
Next, shut down your computer
After 30 seconds to 1 minutes, plug your Router back in
Next, turn on your printer
Turn on the computer
After a few moments check on your computer and ensure that the internet is working. Once it is, hit the wireless button again on the printer to see if your printer got a new IP address. Using the IP address enter it in the address bar of your internet browser and now see if the website for the printer opens.
If the website for the printer opens successfully please follow the steps below:
Step 1: Uninstall Drivers and Software:
From the computer desktop, double-click the Macintosh HD, and then click Applications.
Click the Hewlett-Packard folder.
Double-click the HP Uninstaller, and then click Continue.
Select the product to uninstall, and then click Uninstall.
When prompted, type the Administrator name and Password, and then click OK.
From the Macintosh HD menu, click Users.
Click the correct user name.
Click Library.
Click Preferences.
Click and hold the cursor on the first file that starts with "HP," and then drag the file to the Trash icon on the taskbar. Complete this step for each file that starts with "HP."
Close out of Preferences.
Click the Trash icon on the taskbar, click the Empty button, and then click OK to empty the trash.
Step 2: Verify and Repair your Disk Permissions on the Mac:
Open Macintosh HD and go to Applications
Go to the Utilities Folder
Open the Disk Utility
Select the Hard Drive volume you are using (usually on the left)
Select Verify Disk Permissions
Once that process is done, select Repair Disk Permissions
Step 3: Check for Apple Updates:
Go to Apple
Select System Preferences
Select Software Update
Click Update Now
Install your available updates
Restart your computer
Step 4: Reinstall your Software and Drivers:
1. Please click the following link to download the appropriate Mac OS X 10.9 drivers for your printer: Mac: HP Officejet Pro 8600 series Full Feature Software and Drivers
2. Once downloaded, run through the step by step screens to reinstall your network printer
3. Once the printer is reinstalled, attempt a print and a scan!
Please let me know if these steps resolved your issue. Thanks for reaching out to the HP Support Forums. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

HP Officejet Pro 8600 Plus (UK purchase) will not connect to wired ethernet network

Hi
We have an HP Officejet Pro 8600 Plus (purchase here in UK approx 9-12 months ago) which has sort of worked OK wirelessly but finance industry compliance requirements now require me to connect to it by normal ethernet cable.
When I disable wireless and plug in a (tested and working) ethernet cable it does nothing. I have done a factory reset (via the screen menu) to remove any previous settings. Turned off, turned on, still nothing.
I have restored Network defaults also using the menu command within settings - network; no difference.
In Network - wired summary the screen says:
IP: Not applicable
MAC: xxxxxxxxxxx (not for sharing here)
Hostname: xxxxxxxxx (not for sharing here)
Wireless Direct: Off
I have tried it with IP settings turned to Automatic (DHCP) - no joy.
I have tried it with IP settings turned to Manual(Static) - when i then type in the static IP address that is within the router range (but outside the DHCP reserved range) as soon as I press Done, the settings are lost i.e. 192.168.0.102 - push 'Done' and the IP goes back to 000.000.000.000
The same when entering the default gateway and subnet masks.
I have restored to defaults several times, tried manual and DHCP several times, no joy.
Please let me have some serious suggestions at the earliest opportunity. Just to reiterate I have tested the network connection and cables with other ethernet equipment and they are working. My questions include:
1. Anyone know how to make this printer actually store the manually entered IP addresses etc?
2. What am I missing about the wired setup?
3. Is this a known issue? Is it an issue with the hardware ethernet socket or something?
4. Also in this forum there are references to a Hard Factory reset that is apparently different to the menu 'Reset to Factory Defaults' but links to an article about it just give a 404 error, not found. [Does HP actually have two different levels of Factory Default and if so, God knows why! Does anyone know a working link to this information please?

Hello Qw8, welcome to the forums!
I read your post about not being able to successfully install your Officejet 8600 Plus to your wired network. I will do my best to find suggestions for you to try. I would first like to know which Operating System you are installing the printer on to help me with my research.
If you haven't already, run the installation (HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g Drivers) with your security and firewalls disabled to see if the proper connection can be made.
I do see you ask about other resets and there are others however, at this stage they may not be needed. If they are, I can send you a private message at that time with that information.
Please let me know your OS and we will go from there!
Have a wonderful weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printing from Motorola Xoon tablet to Officejet Pro 8600 Plus via Android ePrint app

Hello!
My Officejet Pro 8600 Plus printer
- is connected to my Laptop (Win7 64bit) via USB cable
- is connected to my router via WLAN
- is configured to use ePrint with a registered mail address
My Motorola Xoom tablet3
- has Android Ice Cream Sandwich 4 installed as operating system
- has the HP ePrint Home&Biz app installed
ePrint
- ePrint app is configured
- the app identified/shows my printer as it should
- I successfully registered to ePrint on the HP website
- I am using a registered mail address for connection between app and ePrint online
As soon as I select a document on my tablet and try to print it,
- the app shows up a "rendering document" message for a short time
- a preview of the document should show up, but it doesn't!!
- I can see the selected document as "pending" print job
- no documents will be printed
- pending documents can't be deleted and remain in the tablet's display
So, I desparately need help! Why does my printer not receive or print the documents from the Xoom tablet?
Thanks a lot for your help!

I understand that It was not a problem with the connection. When dealing with wireless networks, it is always a good idea to set a static IP. It makes things more stable. The reason I told you to enter Google's DNS was not to connect you to Google. All a DNS does is create a pathway to the internet. Once any device finds the internet via the DNS it then goes where it is supposed to. It just uses the DNS as a referance for the internet. Web services should work fine with your router DNS, I have just had more success using Google's public DNS.
You never mentioned wether you did all the power cycling that I asked you too. I know it does not make sense, but power cycling everything on the network so it can all reconnect fresh, solves most issues like this one. However, if you have power cycled everything and you are still having issues, then try removing the Xoom and the printer from the network, and reconnecting them. Sometime, you have to completely remove the printer and mobile device from the networks and reattach them before they will comunicate.
If none of that works, you may need to call the cloud services department to have them take a look at the issue. You can find the number by logging into your ePrintCenter.com acount and looking under the help section. When you get an agent on the phone make sure to tell them everything you have done, so they do not have you do the same steps. Honestly at this point if it is not working the next step is a semi-full reset, which will cause you to loose your ePrint email address, as well as reset everything back to factory settings on the printer. I am not allowed to share how to semi-full the printer via the forums, however the phone agents can walk you through one.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HP officejet pro 8600 plus need to reset, but no screen access due to head error

hi,
I had some HP's 8600 but one of them it is dead as printer and it was replaced.
I need to use it only as scanner (no printing since its problem are the printing heads). The problem I cannot access to the menu through the screen since it is stock with the message mentioning the fail on printing head. The next option it is to watch a demo about heads.
Im trying to access in order to fix a new static ip for the scan.
Is there a way to reset so the printing gets an dhcp ip add? So far the scanner works fine through USB connection.
Thanks in advance

Hello @Rodrigo_cl,
Welcome to the HP Support Forums!
I understand that your HP Officejet Pro 8600 Plus e-All-in-One Printer has encountered a hardware Printhead failure and is not allowing you to scan using a static IP because of this. I would like to assist you today with resolving this issue.
Now, due to the error on the front panel of the printer, you will not be able to perform any resets on your machine. But, if your printer is currently on the network with an automatic IP we can utilize the embedded web server to configure a static IP.
Is your printer currently on your wireless or wired network?
Once I know if your printer is currently on the network, I can guide you towards configuring the static IP through the computer. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

HP Officejet Pro 8600 Plus and HP Pavilion dv7-7073ca

1. HP Officejet Pro 8600 Plus and HP Pavilion dv7-7073ca
2. Operating System
Windows 7 64-bit
3. Error messsage: Blue Screen and Crash. Can't PRINT Wirelessly or Wired + Blue Screen Of Death when printing a document with Microsoft Office. It then restarted the entire computer.
It might have said something about BIOS
4. Any changes made to your system before the issue occurred
No, all I did was install the software that came on the Officejet disc
I don't know what to do. I tried to create an adhoc network, and that didn't work. I tried to connect it via usb cable and the whole computer crashed. I tried to set up a router and then it would not connect to the internet.
Why is this design so flawed? Every wireless printer I have had does this and will not work easily or permanently. You should just be able to connect instantly to your computer and voila, you can print. But nothing seems to work. Mind you, the constant variable here is me, and I have little patience for spending days trying to get this to work. But I am a student, and this is holding back valuable study time.
What do I do???
Any advice appreciated...can someone tell me step by step how to do this? I followed the instructions in the books, but ended up well...you know, so that's why I'm here.

I had the same issue, officejet pro 8600 plus causing blue screen of death on my new computer. After several frustrating months trying everything, I fould that my new computer has 3.1 USB ports, this printer doesnt like them, they need a 2.1 USB port.
For whatever reason USB ports are not backwards compatible, so I plugged the USB cable into the 2.1 port and no more crashes.
3.1 ports are blue, 2.1 ports are black ( the plastic inside)
Hope this helps

HP Officejet Pro 8600 Plus losing wireless connectivity, cannot scan to computer

In our office, we have roughly 4 computers using the HP Officeject Pro 8600 Plus, all of which are connected wirelessly. The printer was previously connected to the internet wirelessly with no problems. A couple of days ago however our computers started randomly disconnecting. The printing function would work for a bit, then disconnect. I found the only solution to this problem was to hit the button on our wireless router that resends the wireless signal out for connectivity.
We hardwired the printer with an ethernet cable and I myself didn't see any further problems regarding connectivity but a couple of the other computers had spotty connections. Again, each time this can be remedied by hitting the button on the wireless router.
Today however we had an additional problem, after trying to scan a document through the automatic document feeder, the printer said it was jammed (although it wasnt). When we went to rescan, the scan to computer function was no longer working. I can scan by hitting the scan button on my HP Printer Assitant interface, and I can also scan to email, but cannot scan to computer.
I have gone through several forums and haven't been able to find a solution. I personally use Windows 8, but other people in our office are using older versions of Windows. We've tried unplugging, restarting, hardwiring, resetting wireless settings, uninstalling, etc. etc. Before a few days ago the pritner was working fine for a number of months.
If anyone has any ideas they would be greatly appreciated.

Hi rtaw,
Welcome to the HP Forums!
I understand that you cannot scan to computer, and that you are losing wireless connectivity, with your HP Officejet pro 8600 Plus. I am happy to help you with this issue!
Please take a look through this wireless guide. Printer Does Not Maintain Wireless Connection.
For the scanning, please see this guide. A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning.
Hope this information helps you, and let me know if you have any more issues!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Hp Officejet Pro 8600 Plus network printing problems

I hard wired my Hp Officejet Pro 8600 plus with an ethernet cable to my router to enable other computers on my network to print to my printer. Several problems have resulted because of this:
1. I cannot find my printer in the Device Manager: it shows as an "unknown device"
2. Sometimes pdf files will print and sometimes they will not. Word and Excel files sometimes print, and sometimes don't.
3. Sometimes documents will spool, but then I get the following message: "Unable to communicate with printer." Then it asks me to make sure all cables are connected and power is on, which is the case.
I have tried all kinds of troubleshooting with information found in Hp forum and on Hp website. Finally, using the HP Print and Scan doctor, I deleted and reinstalled the printer and updated the Full software and drivers. Then I got a message saying "the printer is on your network, but the network software is unable to find it using the typical network discovery method. You can install the printer and operate it normally over the network using the IP address of your printer." I inserted the IP address and it took me through various steps to final installation. I typed a short message into a new document on Microsoft Word and it printed, Then I tried to print some information from the HP website, but this did not print; it didn't even spool.
My router is not detecting the printer on the network either, the light on the port bearing the network cable connected directly to the printer has never been shown to be on, like the other lights. I have been struggling with this for the last several months.
I have an Hp computer, running on Windows 7 Ultimate (64bit). I prefer to use my printer over a network ethernet cable instead of wireless. Please help!

techlearner3 wrote:
My router is not detecting the printer on the network either, the light on the port bearing the network cable connected directly to the printer has never been shown to be on, like the other lights. I have been struggling with this for the last several months.
I believe this is the cause of your problem. First, try another known working port in the router. Next, change the Ethernet cable with a known good cable.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Officejet Pro 8600 Plus ...paper TRAY wont close all the way?

My Officejet Pro 8600 Plus paper tray will not return to the proper position. This has happened TWICE now, and always about 3 weeks into using it...
I returned the first printer and replaced it with the same because we love the features and ease of use. But now, AGAIN??
I tried printing with it hanging out this time..it will print, but ....COME ON! It makes it real hard to pull out the tray that my paper lays on after printing!
I called HP support the first time, he couldnt help me. Just said replace it. There has to be something I can do a button or something? I cant see it..does anyone else know?

Zadora wrote:
Unofrtunately useless information. By trial and error I have found the only way to replace the tray is to lift the entire printer from the front at about a 20 degree angle and then the tray slides in. Very defective design. Never buy another HP.
It is possible you have a defective unit, I would suggest you Contact HP for service.
It may not be any consolation for you, but the tray works fine on my Officejet 8600 Pro Plus.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Officejet Pro 8600 Plus says ink is empty when it is not

Each time I have to change one cartridge on the Officejet Pro 8600 Plus I check how full the other cartridges are. Typically the yellow one is 75% full and the other colours about 50%.
So I buy and install one cartridge. It doesn't matter if it is a black one or a colour one. I replace it with a genuine HP cartridge. That goes fine and comes up as now being full. But immediatly after this it tells me the other cartridges need to be replaced too. I go through all imaginable fixes (including a hard reset of course) but nothing changes - it still insists that the other cartridges are also empty. Of course it now won't print (unless I want to print in black only).
This means that every time I have to replace one cartridge I end up replacing all four. So now I have a stack of old cartridges that are at least half full but cannot be used - what a waste of money! How did HP design a printer like this?

Hello,
Understand that you are facing with replacing cartridge even though they still have ink.
Let me direct you this troubleshooting guide to clean the cartridge contact.
If you're still encountering the issue after cleanin, please refer to the below link to check if there is any out-of-date or missing drivers.
http://support.hp.com/us-en/product/HP-Officejet-Pro-8600-Plus-e-All-in-One-Printer-series---N911/43...
Please let me know how it goes.
-Bryan-
*I am an HP employee*
** Please click "Accept as Solution" if it solved your problem, so others can find it **
***Give Kudos to say "Thanks" by clicking on the thumbs up button under my name***

Replacing ribbon cable cover flap on HP OfficeJet Pro 8600 Plus

Similar Messages

Maybe you are looking for