Replacing T60 60GB HDD with Western Digital Passport 160GB HDD

I'm looking to swap my internal 60GB hard drive with my 160GB WD Passport.  Because my external is a 2.5" drive I would imagine this could be possible but I'm hessitant to try it and possibly mess up my only computer and my external.  I'd also appreciate any help on the install side that you guys can offer.  Below is the Passport I have.  Thanks in advance!
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=3751568&csid=ITD&body=MAI...

Welcome to the forum!
I doubt that this is possible, you need a drive with SATA interface for your T60.
To each his/hers own, but with today's prices of SATA drives, why even bother...
Take a look at this:
http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=10008232
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

  • T41 not recognised USB Western Digital Passport 2.5" Ext HDD

    My T41 used to worked fine with my WD 2.5" ext HDD. For the past 3 months, do not know what happen every time i plug my ext HDD it just not recognised. When i plug this ext HDD to other computers, it just work absolutely fine.
    Can anybody help, please.

    I had same issue with same type of pc and USB Western Digital Passport. Problems was on laptop usb ports that had gone broken. Laptop didnt have warraty anymore so i had to connect USB-DISK to docking stations usb port that is still working.
    Other solution is to buy usb2 PCMCIA adapter.
    Mouse worked on laptop port but no harddrive so i think its was some power issue that laptop usb cannot give enoght power to run harddrive.
    Message Edited by outouser on 04-03-2009 12:04 PM

  • Western Digital Passport 320 GB on macbook

    Does anyone have any experience in using a Western Digital Passport _320 GB_ model as an external HD with an intel macbook?
    Do you power it with 1 or both usb ports?
    Had any problems with it?
    Would you recommend?
    Thanks, .B.

    I have the 160 GB model, and it works fine. I only use 1 port to plug it in. I have two partitions- one for data, and one for Time Machine.
    Steve

  • Western Digital Passport 250Gb external drive and MacBook Pro

    Hello,
    Has anyone with the 15" 2.2ghz 120Gb hd MacBook Pro able to connect this Western Digital Passport 250 GB external drive to only 1 USB port and has it working?
    I intend to buy both of these hardwares, but was told that I may need to get the extra Y-cable that can connect to 2 USB ports of the MacBook Pro since only 1 USB port may not have enough power to work the WD external drive? The WD drive comes with only 1 "standard" USB cable.
    Thanks.

    I've got the 120GB passport and it's worked when I plugged it into the right-side port. But I prefer my connections on the left (to keep room for my mouse) so I got a powered Kensington Dome hub that I run thru my left USB port and have plugged the HD into the hub and that also works.

  • Western Digital Passport not mounting

    I have a western digital passport that I have used a couple of times.  Today I was transferring my music and it said there were corrupted files in my music, and all of a sudden the drive will not be recognized anymore.  I don't know what to do?  I have been reading everything online.  I have tried checking disk utility and it does not appear.  Tried checking the hard drive on another computer and it didn't pop up.  Please all suggestions are helpful.

    The Western Digital Passport drives have a reputation for being power hogs. Your Macbook USB port might not be providing enough power to run the drive. This especially might be the case if you are running off of the battery only. Your PC ports might be giving slightly more power that is enough to run the drive.
    I have a portable Simpletech drive (120Gb) that actually comes with a Y cable that plugs into two USB ports on my Macbook. This provides enough power to run the drive without needing a separate power adapter. The Western Digitals typically don't come with this Y cable, but one is offered. You can buy one off their website for about $20 that should allow you to use the drive with your Laptop. It's lame that everyone else provides such a cable for free while WD charges, but that's the way it is.
    good luck with getting it to work.

  • Mac mini win7 western digital passport

    Hi,
    I have a Mac mini recently (4day) and I installed Win7 ultimate 64 on one partition. So far all OK.
    I attached a Western Digital Passport external HD 1T; FireWare 800.
    Win7 connection driver instaled OK.
    I see the HD in the "Printer and device" menu.
    With Win7 Explorer i cant find it.
    Have a suggestion?
    Tank you.

    Hello, what Format is the external drive?
    Does OSX see the drive fine?

  • Western Digital Passport and itunes.

    I recently got a Western Digital Passport external hard drive in order to put my itunes music onto it, so it would not take up so much space on my macbook. I found it relatively easy to move all my files the first time, but then as soon as I downloaded something from the itunes store, it put it onto my computer. Since the artist was the same as some music I already had, it did not recognize that I did not already have it, so I could not simply move the new music onto the Passport.
    I was wondering if there was some kind of sync feature for the Passport to macs, because I know there is for windows. All I want is for my music to continually go to my Passport, and not take up space on my laptop.
    Thanks!

    If the WD drive isn't plugged in, iTunes doesn't know where your library is, and hence can't properly add the new music files where they should go. The passport MUST be plugged in to the mac before you start iTunes or a new library will be created and your new music files will go in to THAT library.
    The simple way to correct this is to take the files you added that did not go where you wanted them and put them on your desktop from the folder they are residing in (if you're not sure where they are, just click 'Get Info' on the tracks in iTunes and it will tell you where the real files are). From there, close iTunes and plug in your WD drive.
    Reopen iTunes now and make sure in your preferences that the music folder on the WD drive is selected as your music library location. Then make sure 'Copy files to iTunes Music Folder' is checked. Now drag your music files on your desktop in to the iTunes window. iTunes will then copy those files over to the WD drive music folder and add them to the iTunes database.

  • What is the problem with Western Digital HDD and OS X.9?

    I received an email from Western Digital saying that OS X.9 could cause my files on my WD drives to be erased and to unplug all my WD drives until a fix is done. Is this a real problem and if so when will Apple get the fix out. I have joibs I have to get out to clients and this is a major problem for me.

    Western Digital has found that their applications have got serious compatibility problems with OS X Mavericks, and they have to be updated to make them compatible with Mavericks.
    Until then, keep the OS X version you have got. This is a Western Digital problem and this is why your main computer shouldn't be upgraded just after the release of a new Mac OS X version

  • WRT160NL: using with Western Digital My Book USB HDD as torrent server

    Hello!
    I have WRT160NL and  connected Western Digital My Book USB HDD. Is it really to make my router as torrent server for uploading/downloading files without PC?

    hmm.. may be this soft will help?

  • Any method to use a Samsung 160GB IDE HDD to replace original 60GB HDD in zt3030AP Notebook

    Hi,
    Anyone know if BIOS version F.55 supports HDD > 137GB?
    I want to use Samsung 160GB IDE HDD to replace the original 60GB HDD that has bad sectors?
    Any method like BIOS upgrade or must find a 120GB HDD?
    Many thanks,
    Kenny

    trancinchino, you shouldn't encounter any issues in regards to replacing the harddrive in a iMac with a SSD. I believe the issues are the older models such as the 2009. But, be aware that you will need specific tools in order to replace the harddrive because it includes removing the glass panel and the LCD. iFixit's website instructions. http://www.ifixit.com/Device/iMac_Intel_21.5%22_EMC_2428

  • MSI K8N Neo2 Platinum with Western Digital 750Gb Caviar Green 32mb

    Hi all, this is my first post and im a bit of a numbskull when it comes to upgrading, thus this post.
    My HDD is on its last legs and I want to get a Western Digital 750Gb Caviar Green 32mb. Im not sure weather it will work with my  MSI K8N Neo2 Platinum (MS-7025). Can anyone help me out? If you have any suggestions for a better HDD to go for that would also be appreciated, Cheers

    Burst speeds are high mainly because of the disk's cache. That's the only part of the HDD that can get near the maximum bandwdth of the controller.
    The bottleneck for speed is in the fact that the HDD's mechanical properties won't allow it to work faster. With SSD's it is or will be different.
    Back to topic: the WD Green is an excellent choice. I've 6 of those running here now, 5 in a NAS and 1 in my pc and they're simply good. Not the fastest, but very stable, quiet and fast enough.

  • Hp (compaq) mini 110c - no boot with Western Digital Scorpio Black WD5000BEKT

    Dears
    I just bougth Western Digital Scorpio Black WD5000BEKT plug in and no boot  
    I have black screen, HD is alive because i hear is started and the HD led blink in same frequency so looks like Bios cannot read HD firmware to do initialization.
    Motherboard version should be 308f if not mistaken, AMI BIOS has not been upgrade yet, actually i saw only one BIOS update which fix some Bluetoth issue. 
    Could anybody can confirm that disk is running OK on that model ?
    Is there any quick workaround ? 
    I would like to avoid editing(moding)  the BIOS if possible. 
    I am looking forward for your answer
    Link to the HP mini
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01894558&lc=en&jumpid=reg_r1002_us...
    Any support will be highly appreciates.

    No problem maiki83. I am glad you got it running.
    I believe however, that the processors are all fixed to the system boards in the Compaq Mini 110c series. Not having your exact model number, I will show you first how to find your exact model number, and then where to find the information (if it exists).
    <How Do I Find My Notebook Model Number>: http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
    Go to HP's support page and "Enter your product name/number".
    HP Consumer Support:
    http://support.hp.com/
    When you are on your products support page go to the 'User Guides' section
    Look for the "Maintenance and Service Guide"
    In the guide locate the "Removal and replacement procedures" then the "Component replacement procedures"
    If there is a "CPU" or "Processor" category then it will have a list of supported CPU's.
    If you can only locate "System Board" then the list of boards will show the processor that comes on the boards. The latter will most likely be the case.
    Good luck.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Mac Mini conflict with Western Digital External Drive

    My Mac Mini used to work fine with my 2 TB Western Digital external drive, but now when I plug it in my desktop goes blank and the drive won't mount. I have tried it both USB and Firewire. The drive DOES work with my Powerbook G4.
    Any help is greatly appreciated.
    Thanks

    Hi-
    Please clarify.
    What mini are you using? One of the new 2009 models?
    As for the drive, is this a Firewire 800 drive or a Firewire 400 connection?
    If it is a firewire connection, are you daisy chained to another firewire device? If so, in what order is the hard disk?
    If it is a firewire 400 connection, what adaptor/cable are you using?
    For a USB 2.0 connection, are you connected to a hub, or directly to the mini? Is the hub powered or not? Have you tried a different USB port? Same results?
    Did you plug in both the USB and Firewire cables at the same time?
    What is the model of your WD ext drive?
    When you say that your desktop goes "blank" what exactly do you mean? The computer is still on, but there is no image on the screen?
    You mention that the drive works with your Powerbook G4. By Firewire? USB?

  • Ipod with Western Digital 160 gb External Drive

    What do I need to do with the Itunes configuration to use the Western Digital External Drive. I have so much music that I want to use the external drive to store all of my music files. The Music Files on my lap top were taking up to much space on my Laptop....I have copied all of my music files onto the External Drive......I am not sure aht to do next.....
    ANY IDEAS OUT THERE
    Bernard
    Dallas, Texas

    To move your iTunes music...
    Quit iTunes.
    Move the entire iTunes folder including music to the external drive.
    Click on the iTunes icon to start it, then immediately press an hold the Shift key in Windows, Option key in Mac.
    iTunes will ask to Create new library or Choose existing library. Select Choose existing library and select the library in the folder you just moved.
    Move the old iTunes folder to the trash but do not empty it.
    Restart iTunes normally and verify the songs work. If they do, empty the trash.

  • Lion breaks Time Machine backups with Western Digital Drives.

    How can I find out what's being done about this from an Apple and a Western Digital angle?  WD has nothing on their site.  Apparently there is an 'AFP' protocol change.  Help, I have upgraded all machines to Lion and now no upgrades are possible.

    Time Machine was never supported on 3rd party remote drives other than Apple's own Time Capsule and MacOS X Server. Event the Airport Express with an external drive didn't support Time Machine. If any 3rd party products want to support Time Machine, it is their responsibility to stay up to date. Lion has been available to developers for months.
    If you want to hack up your Lion to use the older protocol that Apple now feels is insecure - here you go.

Maybe you are looking for

  • ADF bean datacontrol adf11

    Hi , I have selectOneChoice and upon selection of any value ,the Adf table should refresh and get the udpated data based on the selected value(selectOneChoice ). not using adf bc , We exposed java class as a data control and designed the ui. plz sugg

  • FIX Statement problem

    In this calc: FIX("Actual","Polling",@LEVMBRS ("Measure", 0),"26Apr11":"02Jan12") DATACOPY "R0003152" TO "R9003152"; ENDFIX      When I try to substitute the ancestors of the date range     from "26Apr11":"02Jan12" to @RELATIVE("P05 FY2012":"P13 FY20

  • Test & Dev on Same Machine

    Hi, I want to install test & dev on the same machine what i know is i have to assign different port numbers to them. But i want to access them with diffrenet url addresses how i can install with same host or different host plz clarify one more thing,

  • Kgefec:fatal error0; OCI-21503:program terminated by fatal error; OCI-04030

    Hi expert, I've hit the following errors when I tried to start my application using the corbaloc call:- Would appreciate your expertise adv and helps, please~! dlys_storage_prep_srvr -ename INT -pname DLYS_PREP_SRVR -ORBInitRef NameService=corbaloc:i

  • Accessing client files and is there any a folder dialog

    The client will provide a directory path in a text box of the some UIX page. The application which is stored in the server has to access the all the files in that directory. What if that directory doesnt has the acess permission to the server. One mo