Replacing The Hard Drive, How To Install The OS Again?

Hi all again! Sorry for posting so many questions.
I have a macbook pro late 2011 model. I want to replace the hard drive with an SSD drive but I am not too familiar with Mac products. My question is... do I just take out the old hard drive and put the new one in? Is there a CD with the Max OS on it that I could then use to install the OS onto the new drive?
Thanks!

There are a large number of DIY's, HowTo's and the like on the subject, may want to search a bit.
If you re comfortable to the layout and content of the current internal drive, the quick & dirty would be:
Get an external enclosure for the new drive.
Connect/power up, then use Disk Utility to prep the drive for Mac use: GUID partition scheme & Apple Extended (Journaled).
Use Disk Utility or CarbonCopyCloner to clone the internal volume onto the external.
Test to ensure all is well.
Swap drives when ok.

Similar Messages

I replaced my hard drive and am installing the OS 10.5.6 that i got from Apple. It is stuck with 7 minutes remaining. Help! this is the first time I've ever done this.

I just replaced my hard drive in my 13" Macbook. I got the OS install disk from Apple but it's stuck with 7 minutes remaining. What do I do now? I let it check the disk before the install.

Did you properly prep your new drive first?
Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.
I think you should shutdown the installer then erase the drive per the above and start again.

How much does Premiere Pro and After Effects rely on the hard drive it's installed on?

This may be a really dumb question, but how much does Premiere Pro and After Effects rely on the hard drive it's installed on if all your video files, assets, disk cache, etc are on different drives than the one the program itself is installed on?
The reason I am asking is that I currently have a "relatively" slow Sata II SSD for my C drive that has just my OS (windows 7 64bit) and programs (adobe editing programs, no games) installed on it and nothing else. All of the files used in my projects are saved on either a very fast Sata III SSD or a slower HDD depending on what the files are. For example, disk cache on the Sata III, stills on the HDD.
Being cyber monday I have the opportunity to buy another very fast Sata III SSD to replace my current Sata II SSD C Drive (just OS and programs). Both synthetic and real world benchmarks show a near double in performance. I just want to know if anyone thinks the upgrade is even worth it because for all I know there won't be any increase in performance since no videos, still, cach, etc will be stored on the C Drive.
The alternative is to get a second monitor because I currently only use one 21" monitor.
I suppose another alternative would be to not buy anything on the cyber monday deals and just save money for something else.
Any advice or input would be greatly appreciated. Thanks!

Thanks Alex! I think you are right about not being able to notice the difference between the SSDs. I ended up finding a deal to get about $80 off a great monitor that I've been looking at for a while and decided to pull the trigger on it. I thought about it and realized that there have already been a bunch of times where I want to watch a tutorial on youtube and follow allong in AE or PrePro, but have to keep switching windows. I also frequently want to have my video preview on a separate monitor so I can have a taller timeline window. This monitor will help a lot with that. Thanks again for your help!

The circuit of my macbook is dead yet the hard drive is fine. I need to access a file from the hard drive, how can i do this? is there a cable i can connect to another mac that will let me transfer the file?

The circuit of my macbook is dead yet the hard drive is fine. I need to access a file from the hard drive, how can i do this? The mac turns on the screen freezes as bright blue. Is there a cable i can connect to another mac that will let me transfer the file?

There is another option if the Macbook will start up in Target Disk Mode.
Restart the computer while holding down the T key. If you see the firewire symbol moving around on the screen you can connect this one to another one in TDM. You will need a suitable cable to connect the two Macs.
http://support.apple.com/kb/ht1661
Firewire symbol:

I have a MacPro with two 1T hard drives. How do I access the hard drive that is not the start-up drive?

I purchased a MacPro and upgraded to 2 1T hard drives. How do I access the hard drive that is not the start-up drive?

Have you formatted these new drives yet with Disk Utility? That is the first step.
Once they are formatted, if you want to see them on your desktop open the Finder preferences, General, and clock the checkbox that says "Show these items on the desktop" for the hard disks. If that preference was already set you should see the drives appear after they are formatted. Then they are there for you to use as you wish.

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474

HT4848 Hello- My laptop needs the OS X recovery run. Can I download the software directly to a thumb drive without affecting my desktop unit? The Geek Squad said they need to wipe my hard drive and re-install the operating system. Thanks.

Hello- My laptop needs the OS X recovery run. Can I download the software directly to a thumb drive without affecting my desktop unit? The Geek Squad said they need to wipe my hard drive and re-install the operating system. Thanks.

They already damaged you Mac by fooling with the BootCamp partition without knowing what they were doing. I wouldn't suggest haveing them help you do anything.
Here is the article that describes the Recovery HD: http://support.apple.com/kb/HT4718?viewlocale=en_US&locale=en_US
First, see if you can boot into the Recovery HD. Restart and hold down cmd-r until you see the gray screen. It should boot into Recovery. If your Mac shipped with Lion or Mountain Lion, it will boot into Internet Recovery if it cannot boot into the Recovery HD on the hard drive.
They should have tried this at the store.

Have a nx9600 and when it tries to reboot, the hard drive light comes on, the 2 lock lights flash

At boot, the hard drive light comes on, the 2 lock lights flash simultanously (A and 1 ) , 2 of the 3 fans come on, then it appears to turn off. It will sit in a loop through the reboot process until the power and the battery have been removed.
Have replaced the drive and the center fan. The replaced fan is new and an HP fan. When I have been able to get it to boot , loaded windows and linux on the new drive.
If it sits long enough and you pray it may reboot. Once I turned it upside down and it rebooted.
Have had the system up and running for hours with no problem, then have to reboot or a shutdown and won't reboot.
Suggestions ?

Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

Had to replace my hard drive how do i get my music back from itunes

i had to replace my hard drive how do i get my music back from itunes

Restore the media and other important files from the backup of the computer.

Hi there, i'm trying to change a PDF document written in arabic to Word document, the problem is (( i can't find the arabic language in adobe )) the question is how to install the arabic language

hi there, i'm trying to change a PDF document written in arabic to Word document, the problem is (( i can't find the arabic language in adobe )) the question is how to install the arabic language

<moved from Downloading, Installing, Setting Up to Creating, Editing & Exporting PDFs>

I backed up my itunes folder to an external drive, then deleted it from the hard drive, then restored to the hard drive, but now can't see the files, playlists

I backed up my itunes folder to an external drive, then deleted it from the hard drive, then restored to the hard drive, but now can't see the files, playlists

Was the entire folder copied including the iTunesLibrary.itl file?

I lost my photoshop cs5 instaler but ihave the serial number, how ican instal the program again

I lost my photoshop cs5 instaler but ihave the serial number, how ican instal the program again

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I have had a new ram module fitted and now i have no photos in I photo but they are there on the hard drive how do I get them into i photo as they were.

I have a 2008 Macbook and have had a new ram module fitted and now i have no photos in I photo but they are there on the hard drive on mackintosh ,photos how do I get them into i photo as they were.
Frustrated
Thanks Andrew

changing the ram has nothing to do with the photos missing. Did you install the ram or someone else?

Dead powerbook with operational hard drive: how to extract the data?

I've got a very old (2006/7) powerbook which cannot be powered on; the battery is dead and can't be charged due to assorted catastrophic power issues. I've long since replaced it so I'm not really interested in resurrecting it on a long-term basis. Is there a way to get the data off it? I'm aware I'd have to physically remove the drive.
So far the only instructions I've found online are for getting data off a crashed hard drive, but that's not the problem here. The hard drive is totally operational, it's just that the computer it's located in cannot be turned on.

I bought one of these HD adapters http://tinyurl.com/7455nek to get the files off of an old PB G3 hard drive. Worked great and a reasonable price.
 Cheers, Tom

Where has the hard drive gone after installing lion?, where has the hard drive gone after installing lion?

I'm looking in finder but can no longer see the hard drive. Where has it gone to?

If I understand correctly, you can edit what is shown in the side bar within the "Finder Preferences".
under the "sidebar" tab tick the boxes of the things you want to be shown in the side bar of Finder.
under the "General" tab tick the boxes of the things you want to be shown on the desktop.
Hope this is what you are after and this helps.

Replacing The Hard Drive, How To Install The OS Again?

Similar Messages

Maybe you are looking for