Replacing the HDD with SSD and reinstalling Mountain Lion

Hello,
I have a MacBook (Mid 2010) since August 2010. Since then, I have been using Time Machine and every time Apple releases a new OS, I download it from the Mac App Store and put it on a USB so that I can boot from it, whether to reinstall the OS or in case I faced Hard Drive problems.
My HDD is dying slowly, so I planning to get an SSD. The version of Mountain Lion that I have on the USB is 10.8.
The question is, do I have to download a newer version of Mountain Lion (say 10.8.3) from the Mac App Store knowing that I will be restoring from Time Machine?
Thank you..

Since you want to restore what's on TM to the SSD, the SSD needs to be booted from to receive the restored files and to do that, the SSD has to have an OS on it. And since you'd want to have the SSD's OS updated to the latest ML version eventually, you might as well do that first, since, to some degree, it's also a test of the SSD's functioning. Since you already have the Combo updater, you could just run that, and since it's only a bit over 800 MB, it might even fit on the flash drive. I don't believe that migrating from a TM file made by and containing 10.8.3 data would be problematic when initiated from a 10.8.0 installation (which is I think what you're asking), but there may be some subtle software changes we don't know about that could come back and bite. So starting the migration after updating to 10.8.3 would be the safest bet. At the same time, Setup Assistant brings your existing account stuff over to just reestablish your existence on the SSD, while Migration Assistant is run after a new account has been set up on first boot, so I'd think Setup Assistant is the better way to go.
In which case, how about this: when you run the Combo updater, you are given a choice of which drive you want to install it on. If I remember the sequence correctly (it's been a while since a fresh install), you run the installer, which transfers files to the target disk, and then reboot. The installation takes place on the target disk which then reboots again to begin the setup process. When the startup chime sounds the second time, use the option key to run Startup Manager and pick your flash drive to boot from again. If you already have the Combo updater on the flash drive, run it from there and pick the SSD as the target. When it's finished, if it doesn't start from the SSD, choose that as the Startup Disk (check to see that it says 10.8.3 in Preferences) and when it boots, start the Setup Assistant process using TM.
Or is the flash drive only an installer, meaning it doesn't actually have ML installed on it so you can't use it like an actual boot disk from which you can do normal boot disk things?

Similar Messages

I have a Mac book pro with regular drive, I want to replace the drive with SSD, so can I do t for Mac book pro purchased in 2012 and which SSD is recommended. I am looking for 500 to 700GB SSD.

I have a Mac book pro(13 inch non-retina, i7) with regular drive, I want to replace the drive with SSD, so can I do it for Mac book pro purchased in 2012 and which SSD is recommended.
I am looking for 500 to 700GB SSD.
Thanks

Upgrading your MacBook Pro with a Solid State Drive...
...call back with any questions.
Clinton

Qosmio X500-10W - Can I replace the HDD with another one?

Hello
I have a Qosmio X500-10W with two HDD Toshiba MK5055GSX 500GB 5400RPM 8MB ??SATA II but is one of hs so I wonder if I can be replaced by a more powerful style HDD 750GB 7200tr / min 16MB Toshiba course?
merci

Hey,
Your question is a little bit hard to understand but I think you want to replace the HDD with another (faster) model, right?
Well, thats no problem. HDDs with 7200rpm will work, they are a little bit louder but they are faster so if you need more performance no problem.
Also 750GB or more is no problem because SATA interface is not capacity limited. Theoretically 1TB or more should also work.
Anyway, you can buy the 750GB you mentioned it will work. :)

Will my MacbookPro still be under warranty if i format and reinstall mountain lion from scratch?

Hello everyone,
as in title, will my MacbookPro still be under warranty if i format and reinstall mountain lion from scratch? After the release of mountain lion, bought it and reinstalled it on the previous version,but the system looks slightly slower.So my thought was to format and install it from scratch.But being my computer 1 month old,will this influence my warranty?Thank you for answers.Cheers.M

Reinstall doesn't broke the warranty, so you can reinstall OS X Mountain Lion

How do i uninstall Mavericks and reinstall Mountain Lion (no disk)

how do i uninstall Mavericks and reinstall Mountain Lion ( i dont have the ML disk)

See https://discussions.apple.com/message/23482513#23482513

Can I uninstall Yosemite from my iMac and reinstall Mountain Lion?

Can I uninstall Yosemite from my iMac and reinstall Mountain Lion?

For instructions see http://support.apple.com/kb/PH18846

Replacing optical drive with SSD and HD with new HD

Hi folks, recently my macbook pro unibody's (2011) hard drive started encountering some fatal errors. I've gone through all possible fixes, and it looks like the only option left is to replace the HDD. As much as this initially bummed me out, I'm a little excited about the prospect now. I think I would like to go ahead and replace the optical drive with a SSD while I have the computer open to replace the HDD. This will breathe some serious new life into my macbook pro.
My question is, which SSD's and HDD's are compatible with the macbook and which brands do you guys (the community) recommend? Should I upgrade my ram while I'm in there? How difficult of a job is this? I am mechanically inclined but I have much more experience working on tractors than electronics. Thanks for any advice or input you can offer!

Go to OWC to get the Data Doubler bracket for your model. You can also find HDDs and SSDs there. Be sure to put the SSD where the HDD is located and put the HDD in the optical drive bay. Upgrading RAM is always a good idea. I've done all these in my 2011 MBP. OWC also provides tools needed and online video tutorials.
For optimum use of this combo only install OS X on the SSD. Install everything else on the HDD. Then follow these instructions for setting it up to have the computer boot from the SSD but use your Home folder that is on the HDD:
How to use an SSD with your HDD
If you are going to use an SSD as a boot drive together with your existing HDD as the "data" drive, here's what you can do.
After installing the SSD you will need to partition and format the SSD using Disk Utility. Then, install OS X on the SSD. After OS X has been installed boot from the SSD. Use Startup Disk preferences to set the SSD as the startup volume.
Open Users & Groups preferences. Click on the lock icon and authenticate. CTRL- or RIGHT-click on your user account listing in the sidebar and select Advanced Options from the context menu. You will see a field labeled "Home dir:" At the right end you will see a Change button. Click on it. In the file dialog locate the Home folder now located on the HDD (HDD/Users/account_name/.) Select the folder, click on Open button. Restart the computer as directed.
When the computer boots up it will now be using the Home folder located on the HDD.
Another more technical method involving the Terminal and aliases is discussed in depth here: Using OS X with an SSD plus HDD setup - Matt Gemmell. This is my preferred approach because I can select which of the Home's folders I want on the HDD and which I don't want. For example, I like to keep the Documents and Library folders on the SSD because I access their content frequently.
Be sure you retain the fully bootable system on your HDD in case you ever need it.
Be sure to use Trim Enabler 3.3 to activate TRIM on the SSD.

After I tried to install Mavericks on my Macbook Air, June 2012 the the drive began to fail, with the appearance at more and more frequent intervals of the spinning beach ball, I had to restart even after I wiped the drive and reinstalled Mountain Lion

After I installed Mavericks I could no longer shut my Macbook Air (mid July 2012) down, except by force quit,I was using an Apple Tv screen and Apple wireless keyboard. After that the spinning beachball kept appearing at more and more frequent intervals, even after I had wiped the drive and re-installed Mountain Lion from the Apple site. It is now almost non functional. and just three months out of warranty

Backup your data as soon as you can.
MacBook Air computers sold between June 2012 through June 2013 are known to have a high SSD failure rate and Apple is replacing them for free.
http://www.apple.com/support/macbookair-flashdrive/
You should maintain current backups. Given the known failure rate of your SSD that is especially important.
For more about backups
Time Machine Basics: http://support.apple.com/kb/ht1427
Most commonly used backup methods:
https://discussions.apple.com/docs/DOC-3045
Methodology to protect your data. Backups vs. Archives. Long-term data protection:
https://discussions.apple.com/docs/DOC-6031

Wiping Hard Drive and Reinstalling Mountain Lion?

So I have a lot of, to be quite frank, crap on my MacBook. It's the 128GB model, meaning I can't have too much stuff on it. This used to be my only computer but over the summer I built a new one that has a whole TB+ of space on it so I've been wanting to wipe my MacBook clean. I have one issue - how do I get OS X back on here? There isn't anything on it that I'd like to save. I've tried the OS X Recovery application but it was installing OS X Lion on my little USB drive. I'm using OS X Mountain Lion though and I don't want to downgrade then have to purchase Mountain Lion even though it came pre-installed. So I'm basically asking:
1) Are there any other methods of installing OS X Mountain Lion back on my clean MacBook?
2) How exactly do I go about wiping the Drive anyway?
Please explain everything in detail so I know for sure I'm not doing anything wrong. Thanks in advance!

Uhm, bump. Still need help.

Recently replaced optical drive with SSD and stripped the screw of the hinge on the optical drive. Now speaker is muffled

I still have the hinge but its not on the enclosure for the ssd. Now my speaker on the right side is muffled. Do I need a replacement bracket or is my problem unrelated?

It would be helpful if you indicated the EXACT model/year MBP that you have.
What 'hinge ' are you referring to? I am unaware of any hinges on an optical drive.
Look at the iFixit.com website for pictorial instructions that may assist you with your problem.
Ciao.

Replace existing HDD with SSD on a T530 - noob question

Hi all,
I have a T530 with conventional hard disk. I want to replace it with an SSD (probably Samsung 840 Pro). When I look at the replacement instructions on the website, they refer to the use of spacers when installing an SSD (as opposed to the rubber rails which apparently bracket my current HDD).
Do I need these spacers in order to install an SSD? If so, do I have to buy them from Lenovo?
Many thanks
Jason
Solved!
Go to Solution.

If its the same outside dimensions you transfer the rubber rails onto the replacement drive. They add shock protection to the drive although an SSD is pretty shock proof. It must not float around though!! If you don't use the rails you'd lose them and probably never find them again when needed.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Replacing old HD with SSD and Hybrid HD Mac Pro 2008, 10.7.5

My old 1tb 7200 rpm drive has started doing some quirky things, so I decided to upgrade to a 240 Gb SSD for my OS and App's, and I would install the 2TB Hybrid drive to hold the home folder with movies, pics, music. So I formatted my 2TB disk in disk utilities.
I copied, by dragging and dropping my home folder from old drive to new 2TB, I went into system preferences, under User/Group created a new user at the administrator level, and set the new user to open at login.
When I restarted it was the old galaxy screen, the dock had moved back to the bottom and it was set up different.I also can open Iphoto or itunes and they are empty, "The folder “Pictures” can't be opened because you don’t have permission to see its contents", and the same goes for Itunes, I haven't tried FCPX or the Adobe Products I use.
"So, I think well I probably just need to set up my ssd with my OS and App's so the new disk can see my prefrences", so I format, use Carbon Copy Cloner, deselecting, under the User tab, my old User and the New user I had created for the new 2TB drive, because I have no room for it on the 240 GB drive. And, I deselected some apps I didn't want to come over. I cloned it, changed my start up disk in my preferences, and restarted.
I still get the same thing when I logged into my new 2TB Drive. I am planning on keeping my old drive for archive, and I also backed up to an external using Time Machine before I started messing with the new drives.
Please Help!
Mac Pro 2008
OSX 10.7.5

Mac OS X is inherently a Multi-User system designed to protect each User's data from all other Users. A new User does not have access to your existing files, including the desktop Preferences and the Dock Preferences
You need to do one of:
a) change all the permissions all around -OR-
b) make this change without creating a new User (e.g., by cloning your original User or by Installing a new version of Mac OS X and using Assistants to connect to the old User data. This guide can help:
Setting-up a new Mac from an old one, its backups, or a PC

I recently installed a new SSD and installed Mountain Lion on my mid 2010 MacBook Pro, and now it randomly crashes sometimes upon waking from sleep. What's wrong?

I have no clue how to diagnose this problem. I've run disk repair but nothing seems to work.
Here is the crash report:
Interval Since Last Panic Report: 84061 sec
Panics Since Last Report:          1
Anonymous UUID:                    31C07E60-673E-28EB-FBA5-EE4048E894C4
Sat Dec 29 06:12:03 2012
panic(cpu 0 caller 0xffffff7f8b1abb25): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff80a9dfa000 0x0a5480a2, D0, P2/4
Backtrace (CPU 0), Frame : Return Address
0xffffff808648b260 : 0xffffff800aa1d626
0xffffff808648b2d0 : 0xffffff7f8b1abb25
0xffffff808648b360 : 0xffffff7f8b2a54b3
0xffffff808648b3c0 : 0xffffff7f8b2a5527
0xffffff808648b430 : 0xffffff7f8b5ba853
0xffffff808648b570 : 0xffffff7f8b2cb659
0xffffff808648b5a0 : 0xffffff7f8b1b58da
0xffffff808648b650 : 0xffffff7f8b1b0fac
0xffffff808648b840 : 0xffffff7f8b1b2ade
0xffffff808648b920 : 0xffffff7f8c214ad5
0xffffff808648b960 : 0xffffff7f8c22a507
0xffffff808648b980 : 0xffffff7f8c249353
0xffffff808648b9c0 : 0xffffff7f8c2493b1
0xffffff808648ba00 : 0xffffff7f8c22fc43
0xffffff808648ba50 : 0xffffff7f8c1ea0fc
0xffffff808648bae0 : 0xffffff7f8c1e5efa
0xffffff808648bb10 : 0xffffff7f8c1e3aab
0xffffff808648bb40 : 0xffffff800ae650c3
0xffffff808648bbc0 : 0xffffff800ae67153
0xffffff808648bc20 : 0xffffff800ae64b8f
0xffffff808648bd70 : 0xffffff800aa981e1
0xffffff808648be80 : 0xffffff800aa20aed
0xffffff808648beb0 : 0xffffff800aa10448
0xffffff808648bf00 : 0xffffff800aa1961b
0xffffff808648bf70 : 0xffffff800aaa5b16
0xffffff808648bfb0 : 0xffffff800aaced53
      Kernel Extensions in backtrace:
         com.apple.NVDAResman(8.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f8b144 000->0xffffff7f8b446fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8b0b2000
            dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f8b130000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f8b0ed000
         com.apple.nvidia.nv50hal(8.0)[9F3D09B5-3158-3D9E-BDA3-E71576AAD3B7]@0xffffff7f8 b454000->0xffffff7f8b776fff
            dependency: com.apple.NVDAResman(8.0.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f8b1 44000
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8b0b2000
         com.apple.GeForce(8.0)[2E56ED9A-D848-3795-9E52-56BABDC9000C]@0xffffff7f8c1cb000 ->0xffffff7f8c28dfff
            dependency: com.apple.NVDAResman(8.0.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f8b1 44000
            dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f8b130000
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8b0b2000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f8b0ed000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x000000000a800000
Kernel text base: 0xffffff800aa00000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 40470682116428
last loaded kext at 636470034064: com.apple.filesystems.smbfs          1.8 (addr 0xffffff7f8cd8a000, size 229376)
last unloaded kext at 126066371403: com.apple.driver.AppleUSBUHCI          5.2.5 (addr 0xffffff7f8ba2a000, size 65536)
loaded kexts:
com.nvidia.CUDA          1.1.0
com.apple.filesystems.smbfs          1.8
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AudioAUUC          1.60
com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
com.apple.filesystems.autofs          3.0
com.apple.driver.AGPM          100.12.69
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleHDA          2.3.1f2
com.apple.driver.AppleSMCLMU          2.0.2d0
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.2.11
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.AppleMikeyDriver          2.3.1f2
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleIntelHDGraphics          8.0.0
com.apple.driver.AppleIntelHDGraphicsFB          8.0.0
com.apple.GeForce          8.0.0
com.apple.driver.AppleMuxControl          3.2.11
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.driver.AppleUSBTCButtons          235.4
com.apple.driver.AppleUSBCardReader          3.1.0
com.apple.driver.AppleUSBTCKeyboard          235.4
com.apple.driver.AppleIRController          320.15
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.2
com.apple.driver.AirPort.Brcm4331          602.15.22
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AppleAHCIPort          2.4.1
com.apple.driver.AppleUSBHub          5.2.5
com.apple.iokit.AppleBCM5701Ethernet          3.2.5b3
com.apple.driver.AppleUSBEHCI          5.4.0
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.kext.triggers          1.0
com.apple.driver.DspFuncLib          2.3.1f2
com.apple.iokit.IOAudioFamily          1.8.9fc10
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.iokit.IOSurface          86.0.3
com.apple.iokit.IOBluetoothFamily          4.0.9f33
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.AppleHDAController          2.3.1f2
com.apple.iokit.IOHDAFamily          2.3.1f2
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.nvidia.nv50hal          8.0.0
com.apple.NVDAResman          8.0.0
com.apple.driver.AppleGraphicsControl          3.2.11
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.3.5
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.iokit.IOGraphicsFamily          2.3.5
com.apple.driver.AppleSMC          3.1.4d2
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
com.apple.iokit.IOUSBMassStorageClass          3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.driver.AppleUSBMultitouch          235.7
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleUSBMergeNub          5.2.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.2.1
com.apple.iokit.IOUSBUserClient          5.2.5
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBFamily          5.4.0
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7.2
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f16
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: SAMSUNG SSD 830 Series, 256.06 GB
Serial ATA Device: Hitachi HTS545050B9SA02, 500.11 GB
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3

You have the MacBookPro6,2, the Edsel of Macs. It may be covered by this program:
MacBook Pro (15-inch, Mid 2010): Intermittent black screen or loss of video
Make a "Genius" appointment at an Apple Store to have the machine tested.
Print the first page of the panic report and bring it with you.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed.

Lessons learned replacing ThinkPad HDD with an SSD

Installing a Samsung SSD on my 3 year old ThinkPad W510 was easy. Getting Windows 7 set up took me days.
Here are some lessons learned so you can do it faster.
Backup
Lenovo Rescue & Recovery will back up files to a USB 3.0 disk but it took 10+ hours and it put several files and folders at the top level. Can it back up multiple disks (HDD and SSD)? Probably not.
Backup
Windows 7 Backup & Restore doesn’t have those problems backing up data files but when trying to save a disk image to an external drive that’s > 2 TB (with 4K blocks), it runs for a while then fails. The generic error message and event log are not helpful, costing hours of debugging.
SSD “frozen”
Some web sites say that an SSD will perform better if you fully erase it before installing the OS, but when I tried to do this, the Samsung Magician software said the SSD was “frozen.” Apparently this is a confusing way to say it’s locked from erasure. Magician’s workaround recommendations didn’t help. Magician’s PDF guide has alternate workaround recommendations (like turning of AHCI mode in BIOS) but I didn’t find them soon enough.
Clone the HDD or install fresh?
Restoring Lenovo’s factory disk image onto the SSD (instead of cloning the HDD) fixed accumulated problems but it took several days of work and problem solving. (The HDD’s hidden SYSTEM_DRV partition was full. Did that cause some of the problems?)
How to over-provision the SSD
“Over-provisioning” boosts an SSD’s sustained write performance by allocating temporary space. The Samsung Magician program will set this up -- but not on a drive with the Lenovo_Recovery “Q:” partition. Moving and resizing C: and Q: with GParted Live didn’t solve this. Instead it made me start all over restoring the factory disk image and the Windows Updates and Lenovo Updates. The solution (thanks, Samsung’s phone tech support!) is to use GParted or Windows Disk Management to shrink the C: partition. All it needs is some unallocated space between partitions anywhere on the SSD. (Samsung recommends 10%.) You don’t have to do anything to allocate that space to the purpose.
Partition alignment
For speed, you want the partitions aligned on a 4096 byte boundary. GParted will align them on a MiB boundary, which is more than adequate.
Windows restore points
The Windows installer is supposed to make system restore points but I found it started out with a broken configuration. So open System Properties, the System Protection tab, and check the “available drives” for any drives labelled “... (Missing)”. Turn off “system protection” (restore points) for the “missing” drives, then turn it on for the real C:.
Faster updates
After restoring Lenovo’s factory disk image, you must iterate installing Windows Updates and Lenovo Updates over and over until there aren’t any more to install. Fortunately this is faster on an SSD than an HDD. Save more time by having only one user account and no password so Windows reboot won’t stop for login. Also watch the taskbar for license dialogs that open up behind other windows but require your clicks to proceed.
Watch for stuck updates
Lenovo Update quietly gets stuck updating Intel WiFi & WiMax software. The fix is to download those installers from lenovo.com, run them, get an error message that it can’t install over the existing software, uninstall the WiFi & WiMax software, then run the installers again.
Restore from backup, or not?
At key points, I made system disk image backups of the SSD to the old HDD and tried restoring from a backup after the failed repartitioning experiment. But Windows Backup and Restore won’t restore a system image after booting from the destination drive’s recovery partition nor from the source drive’s recovery partition. Since my backup was on the HDD in the Ultradrive bay, I couldn’t boot from the Rescue & Recovery CD. The workaround was to make a bootable System Repair disk on a 512 MB USB key. Windows Backup and Restore then failed with another meaningless error, “The parameter is incorrect. Code: 0x80070057.” Apparently you have to remove the USB key right before starting the system restore operation but that yielded the error, "No disk that can be used for recovering the system disk can be found." I’m not sure if that’s a symptom of removing the USB key or yet another problem with Windows Backup and Restore. Maybe it can’t restore to resized partitions? Windows Backup and Restore failed and burned hours of my time.
Fix the annoying request on bootup?
After you install Windows, all its updates, and Samsung Magician, you can use Magician to adjust system settings for SSD performance. Then you’ll find that Magician needs permission to “make changes to this computer” on every boot. Samsung tech support explained that you can then remove Magician from the startup list via msconfig.
Optimizations
Recomputing the “Windows Experience Index” might make the OS recognize the boot drive as an SSD and disable defrag for it. This didn’t work for me, so be sure to unschedule defrag. Also use msconfig to remove Digital Line Detect from the startup list and turn on “No GUI boot” (no Windows splash screen). Also use power plans Advanced Settings to never turn off the “hard disk.”
ThinkPad
Thumbs up. Easy to replace the HDD with an SSD and move the HDD into an Ultradrive caddy. Sturdy. Easy to work on. Well documented. Hardware that I didn't want to replace.
Microsoft Windows 7
Thumbs down. Buggy, fragile, over complicated, inadequate error messages, painstaking to install, difficult and time consuming to administer, poorly documented, accumulates gunk over time that causes problems, failed backup software, even a fresh install has scary event log errors.
Lenovo forums & support pages
Very helpful. Sometimes it's good to use Use Google to search them e.g. https://www.google.com/search?q=site%3Alenovo.com+"over+provision"
Samsung 840 EVO SSD
Fine hardware. Some confusions around the Magician software. Great phone tech support. Web support doesn’t work.
References and more info
How To Geek, Lifehacker, Lifehacker, SSD Review, Newegg, Newegg, Anandtech, Storage Review.

I may have confused you: Lenovo provides two tools, 1) one makes DVDs that restore the original out-of-the-box factory image of the entire disk (i.e. System partition, C: + Q: partitions) and 2) Backup and Restore, which is the Lenovo user backup tool that does conventional full disk backups, i.e. with all user customizations, added programs and files. Since my system-generation-to-SSD saga hadn't created the the Q: partition correctly, my only alternative was to create a full up-t-date disk backup with the second Backup and Restore tool that include all the Windows + Lenovo updates, but didn't include extra programs and my user files. This fitted on 5 DVDs, which I will use if ever I reinstall the entire operating system.
Once you get above 100-150 GB of backup volume (I'm at 450 GB right now), the Lenovo Backup and Restore is very slow, so I use the much quicker Windows built-in Backup and Restore program to backup incrementally a system image and all files.

Replacing T420s HDD with a new SSD

Hello,
I wonderd if It is possible to replace the HDD with a new SSD, while placing the HDD in the Ultra-Bay slot.
And if so, which SSD model should I buy, and how do I transfer the Operation System and data to the SSD?
Will this SSD model be compatible?
Corsair Neutron Series 120GB SSD Sata III MLC 2.5 Inch Retail
Thank you so much,
Guy
Solved!
Go to Solution.

Corsair Force Series 3 Notebook Update Kit 120GB SATA III(6Gb/s) SSD Details :
WarrantyThree years
SSD Unformatted Capacity120 GB
Max Sequential R/W (ATTO)550 MB/s sequential read — 510 MB/s sequential write
Max Random 4k Write (IOMeter 08)85k IOPS (4k aligned)
InterfaceSATA 6Gb/s
TechnologyAsynchronous NAND
Form Factor 7mm high, 2.5 inch
DRAM Cache Memory No
Weight80g
Voltage5V ±5%
Power Consumption (active)2.0W Max
Power Consumption (idle/standby/sleep)0.5W Max
S.M.A.R.T. SupportYes
Shock1500 G
MTBF2,000,000 hours
Neutron Series 120GB SSD :
WarrantyFive years
SSD Unformatted Capacity120 GB
Max Sequential R/W (ATTO)555 MB/s sequential read — 211 MB/s sequential write
Max Random 4k Write (IOMeter 08)85k IOPS (4k aligned)
InterfaceSATA 6Gb/s
TechnologyNo
Form Factor2.5 inch
DRAM Cache MemoryNo
Weight.1kg
Voltage5V ±5%
Power Consumption (active)4.6W Max
Power Consumption (idle/standby/sleep)0.6W Max
S.M.A.R.T. SupportYes
Shock1500 G
MTBF2,000,000 hours
T420s 4170-CTO : i5 2520M, 6GB RAM, 320GB HDD(7200rpm).
Z60t 2513-MCU.

Replacing the HDD with SSD and reinstalling Mountain Lion

Similar Messages

Maybe you are looking for