Replacing the nano battery with the invisible shield... How?

Does anyone know how the invisible shield will work when the battery needs to be replaced? I am looking for a permanent solution. While I know that I will be able to peel the Invisible Shield off for the battery replacement, the shield will become stretched and distorted. At this point I will not have a shield, and don't have to want to buy another one. The only solution I think would be possible is if there was a way to slice the shield with a razor (around the seam). Any ideas. Perhaps I shouldn't buy the Invisible shield, it might just be a short term solution.
Anyone?

Actually, I think the more prudent question is whether or not the nano will even be accepted for battery replacement by Apple, or anyone else with a cover like that attached to it.
They could even charge extra money to deal with it, I can see either situation as being realistic.
If that does turn out to be the situation, then it would come down to a matter of costs as far as what you would need to do.
That being said, I personally think it is way too early to even worry about things like that since it is years off at a minimum, and it could very possibly never need to be done.

Similar Messages

  • Something went wrong with the invisible shield application

    After putting on the invisible shield, I was really happy because it turned out great. I waited about two to three hours then started using it.
    To my horror, I think my nano might have shorted out because when I press play the song changes. sometimes the play/pause button doesnt even do anything when i press on it...when i touch the volume control, it increases and decreases erratically regardless of what im trying to do...sometimes it even seems like my nano has a mind of its own because when i simply move the nano, without touching the controls, the song changes or the volume changes.
    this erratic behavior occurs sporadically. sometimes my nano works fine. then right when i think all is well, my nano becomes possessed. is it possible that my nano has shorted out? maybe i should let it dry?

    hey carl,
    The process of applying the shield requires that I wet the film with soap and water. What do you suggest I do? My mistake was that I did not put on the hold button when I was applying the wet film and thus my ipod turned on while I was putting on the shield. i realize now that my nano should not have turned on for 24 hours. Should I just wait and see if the funky behavior goes away? or should i visit the nearest apple store?

  • Is this really a Shieldzone the 'Invisible Shield'?

    Hi
    I ordered a Shieldzone skin for my nano, and as I'm in the uk I couldn't order from the USA site, so found a company through Amazon to buy it from. It arrived today, but on the packaging, rather than a Sheildzone logo, there's a CAPDASE logo. Overall the product looks like a cheap version. Have I been 'done' here? Not knowing what the proper product should look like, i just wanted to get some advice before 'kicking-off' at the company thats sent it.
    Any help greatly received.
    Cheers
    Wayne

    Shieldzone is the company that makes the Invisible shield.
    http://www.shieldzone.com/
    Looks like Capdase (http://www.capdase.com/) is a completely different company.
    If you go here -> http://www.capdase.com/index.php?page=product&type=8&cat=5&brand=5
    Quite a few language/speeling errors also.
    Looks like a Japanese/Chinese company with no one really reviewing the language conversion on the website.

  • Hard Shell or Rubber Case on the top of the invisible shield?

    Hey Guys,
    I have installed the invisible shield on my iPhone 3G S and let it to dry for around 3 days now .. I just wanted to install shell on the top of it just in case to protect it from any drop damages and so on. The question is : Is it safe to install a hard shell cover on the top of the invisible shield ? or is the hard shell cover is going to harm the invisible shield in the long term?
    Thanks in advance,
    Rashid

    Our MBP is an A1278  (uni-body) bought in NZ 28 June 2011. S/N: CO2FW8NVDH2G
    It looks more like a bit of dark grey foam rubber with a smooth coating . Was attached to the retaining bar and/or plastic pull tab on top of the display data cable connector and about the same length across and tapering towards the cable that goes to the display. I may be thick but who, what and where are OWC?
    What problems could an insularor cause? I had another reply from someone via ifixit who said he liked the idea of a bit of neoprene replacing the lost pad! What to do?
    Thanks for your time replying
    John

  • The Invisible Shield

    I just got my Invisible Shield. I hate it. Application was ****, and to lift up and re-apply leaves lines / fingerprints. I'm sending it back, and they will send me a new one free of charge. If it doesn't look well, it's going back. When / if my iPod gets too scratched at any time, I will use Brasso to remove scratches.
    This is a good concept, but I don't feel that it's application is very easy, nor is the result appearence of the product.

    don't go for what looks to be the best deal (the cheapest). Go for the IS, it's fully worth every dollar. Best investment for my iPod this far. Once applied & dried it really fits like a glove (even better).
    Before I had the IS applied I was really worried about scratching the iPod (even by just looking at it) and was seriously orienting on what case to buy. Now I still use the original case shipped with the iPod but in fact I don't really bother: The IS really protects it that good that a case really is not needed anymore!
    Take our advise at heart and go for the Invisible Shield.
    Jan.
    iPod 5G - 60GB   Windows XP  

  • Should I get "The Invisible Shield for PowerBook"?

    Hi, has anyone bought the Invisible shield for PowerBooks? I wanted to get one to help protect my PowerBook palm rest area and clicker from pitting/scratches (my other PowerBook started to pit after about a year). Is it as invisible on the PowerBook as it is on an iPod? Would you'll recommend "The Invisible Shield" for PowerBooks? Thanks in advance for any help!

    I use the Marware Protection Pack from http://www.marware.com
    It has an adhesive wrist area protector that looks really slick and is comfortable to use. It also comes with a screen cloth and a keyboard cover to protect the screen from the keys. All for 20.00.
    PowerBook G4 15; 1.67 GHz; 512MB; 100GB; SuperDrive   Mac OS X (10.4.3)  

  • Did anyone have success applying the invisible shield to their ipad?

    Did anyone have success applying the Invisible Shield to their Ipad?

    Yes.  Make sure any iPad Cover that you have for it is removed first.  Then, start at the bottom where the On/Off button is.  Peel off only a small section of the bottom of the invisible layer and attached the small exposed sticky side to the bottom of the iPad.
    Line it up as best as you can.  Placing the edge of the iPad against a flat surface like a wall or backsplash on a kitchen counter can help you to keep the invisible sheet "square" with the iPad surface.
    Was that a confusing answer?

  • Do Apple Stores stock the Invisible Shield?

    Im based in the uk, but a friend is heading over to San Fransico next week and im wondering if the apple stores stock the invisible shield or will i have to order from the invisible shield website?
    cheers guys

    Hi there,
    AFAIK the only way to get them is via their website.
    I'm from Germany and have been looking around the last days to find a German or at least European dealer, thinking it might arrive faster. Haven't had any luck though :/
    So, I ordered mine 2 days ago via the website. I'm pretty curious how long it will take to arrive here.
    Cheers from Germany,
    Mara

  • HT4847 Why do I get the answer on trying to open this application, limit reached,want to use skygo on this device visit manage devices to replace a registered device with this one. How do I do that

    Why do I get the answer on trying to open the application skygo, limit reached, want to use skygo on this device visit manage devices to replace a registered device with this one. How do I do that. ?

    Please see http://help.sky.com/tv/sky-go/register-devices-on-sky-go . Note that if you have in the past already removed one device you will have to wait for a month to elapse before you can remove another.

  • I'm asking about if can i i'm asking about if can i replace iphone 5 battery with iphone 5s

    hello sir,
    i'm asking about if can i replace iphone 5 battery with iphone 5s
    thank you

    thank you for your attention Mr Ethmoid
    i know that ,
    but i'm asking if i have iphone 5s dead but the battery working perfect ,
    can i took this battery and put it in other iphone 5 ( sure this was done by maintenance department ) ?
    all i need to know if iphone 5 & 5s battery same AMP  ? OR not same AMP ?

  • I'm trying to open itunes. When I do it wants me to go through all my apps, asking me via a popup to replace or dont replace the app. How do I get rid of this?! Its so annoying!

    I'm trying to open itunes. When I do it wants me to go through all my apps, asking me via popups, to replace or dont replace the app. How do I stop this!? It goes on and on....

    Try to connect in recovery mode, explained in this article:
    iOS: Unable to update or restore
    Before that, back up your device, explained here:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    How to back up your data and set up as a new device
    You can check your warranty status here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • My daughters computer crashed along with her itunes library.  She can plug it into my computer so how do we create her account on my computer?  When we plug it in, it wants to replace her nano songs with my library.

    My daughters computer crashed along with her itunes library.  She can plug it into my computer so how do we create her account on my computer?  When we plug it in, it wants to replace her nano songs with my library.

              Not quite surewhat your asking exactly. You look here for different ways on importing media from nano to your computer! https://discussions.apple.com/thread/2417169?start=0&tstart=0

  • HT201441 I found a phone that had been stolen, so I asked apple id to its original owner she said that she had forgotten and replace the apple id, how to solve a problem like this?

    II found a phone that had been stolen, so I asked apple id to its original owner she said that she had forgotten and replace the apple id, how to solve a problem like this?

    Send the original owner this link.
    (120249)

  • Water under the screen while applying the invisible shield

    I was applying the full body invisible shield and since it was difficult to apply the back(as suggested by every one) I did it one night switched the phone off all the time and the next morning it was fine and i loved it as it was looking good and on top of it it was protecting the back side of the phone.
    The next night i applied the front side(supposed to be the easy side and child's play) and to my annoyance when I switched the phone back on in the morning there was water(? solution for applying the screen protector)under the screen. The screen looks awful
    The ringer volume plays up now and switching on the phone is a bit cumbersome as it plays (sometimes in one go sometimes I have to use the home button and the power button together).
    My phone is new ,bought on the 2nd of April 2010 and what do I do now? will apple warranty cover this?

    Apple will not cover any moisture damage to the iPhone.
    You can see if the moisture sensors are tripped or not. If they are then you are out of luck on warranty, no questions asked. Here is Apple's support document of inspecting the moisture sensors...
    http://support.apple.com/kb/HT3302
    If the sensors are not tripped, Apple would probably not cover the iPhone under warranty if there is visible signs of water (or liquid) behind the screen. If the button problems are not that bad, then you could switch the iPhone off and place in a bag of dry rice. It might help draw out some of liquid from the screen.
    Personally I would stay away from anything that requires liquid to install. If done wrong it can kill the phone, which may be the case here. You can still make an appointment at an Apple store to look into an out of warranty replacement, which would get you a refurbished iPhone for a flat rate. The other option would be to check to see if there are any local third party repair centers. They may be cheaper than the out of warranty replacement, but at the same time could be more.

  • Does The Invisible Shield Marr Out Existing Scratches On iPod?

    When you put an invisible shield on your ipod, do you no longer notice the scratches that exist on your ipod?

    i'm also wondering if the crystal shield by istyle does the same thing.

Maybe you are looking for