Replacing w530 US keyboard with UK one

I have bought a w530 in the US and wish to replace the keyboard with a proper UK one. The original US one was not backlit - can I just replace with a UK backlit one? Is the backlighting built into the keyboard?
Does it matter which I buy of these two? :-
04W3092 FRU CS12 B/L KBD UKE CHY
04W3166 FRU CS12 B/L KBD UKE SRX
Thanks.
W530, 32GB ram, K2000m
Solved!
Go to Solution.

Well the part arrived and it was the right one, swapped out perfectly. The backlighting is aweome, well worth getting. Also the UK keyboard has a large Return key!!
W530, 32GB ram, K2000m

Similar Messages

Possible to replace non-backlit keyboard with backlit one?

I have a w530 without the backlit keyboard, can I get a backlit keyboard and switch it over? Is the backlight integrated with the keybaord itself?
W530, 32GB ram, K2000m

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are trying to replace the notebook keyboard with a backlit keyboard if its possible
We will surely assist you with this issue
As far as I know its only the top end models have that premium backlit feature. This is a Envy notebook feature and
we cant have the same backlit keyboard on a entry level notebook. You should also know that Notebooks are not open architecture like desktops, we cannot mix and match parts just as they can with the desktop PC environment.
We need to check if backlit keyboard feature is listed for your notebook in the service and maintenance guide or not.
If it is listed there is a chance that you can go for it. Its just that the motherboard has to have the ZIF connector for the ribbon cable that provides power to the backlight.
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

HT4847 Why do I get the answer on trying to open this application, limit reached,want to use skygo on this device visit manage devices to replace a registered device with this one. How do I do that

Why do I get the answer on trying to open the application skygo, limit reached, want to use skygo on this device visit manage devices to replace a registered device with this one. How do I do that. ?

Please see http://help.sky.com/tv/sky-go/register-devices-on-sky-go . Note that if you have in the past already removed one device you will have to wait for a month to elapse before you can remove another.

HT4993 Replaced my iphone 5 with new one because my first one the volume buttons stopped working. Now my contact list is all wrong. It's correct on my I pad but don't know how to correct it on my phone. And my email is loading hundreds of old emails,?

Replaced my iphone 5 with new one because my first one the volume buttons stopped working. Now my contact list is all wrong. It's correct on my I pad but don't know how to correct it on my phone. And my email is loading hundreds of old emails,?

If the iPod is defective and not abused Apple will exchange it at no cost under your warranty.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

LabVIEW2009: How to replace new Icon Editor with old one?

Colleagues,
I really don't like the new icon editor introduced in LabVIEW 2009:
That was nice attempt to make "embedded Photoshop" with lot of features:
But I really don't like it, because:
- it opened EVERY TIME on the RIGHT monitor (I have three monitors, and primary monitor in the middle)
- it takes lot of time for launch (old icon editor was started momentally)
- from usability point of view - it was wrong to place tools on the right side. Commonly they located on the left side (and only in old icon editor, but also in imageprocessing software like Adobe Photoshop). Also front panel UI design... hmmm... this can be better...
- some bugs or changed functionality (for example - select ROI, then press <Del> button - nothing happened)
etc...
Is it possible to replace it with old one:
Ideal solution will be - simple switch between both editors (some introduced features are not so bad).
Thanks in advance,
Andrey.
Message Edited by Andrey Dmitriev on 01-29-2010 11:00 AM
Solved!
Go to Solution.

Go into <LabVIEW>\Resource\Plugins and rename lv_icon.vi. This is the plugin that's called when you invoke the icon editor, and if it's not there, LV reverts to the built-in editor (at least today. I'm not sure how many versions ahead they will keep the code).
You should note that the editor is open source, so you can go in and change what you want (or save yourself time and use the changes others have made, such as PJM's thread here. You may also want to look at the other discussions in that group).
Try to take over the world!

Replace the stranded keyboard with backlit keyboard

hi,
i want to replace my keyboard with a backlit keyboard on my hp envy touchsmart j040us. is it possible to do that ?

Pavan,
Yes it's possible.
Go through Page 22, 23 & 95 - 98 in this manual of your laptop for knowing which part number you've to order & search it through HP Part Surfer website or online stores : http://h10032.www1.hp.com/ctg/Manual/c03733656.pdf
Specs:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03820144
You might want to contact HP for replacement:
https://h22207.www2.hp.com/us-en/contact-hp/product/HP-ENVY-TouchSmart-15-j040us-Notebook-PC/model/E...
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Replacement of Standard keyboard with Backlit keyboard

Hi,
I've a standard keyboard in my HP envy dv6 3630qm, can I replace it with a backlit keyboard..??
Regards..
This question was solved.
View Solution.

Hi there:
Good news
Keyboard with backlight feature is available in few layouts, the part number would be similar to 698951-xxx.
You can look in through page 25 & 61 in this manual and know the exact part number:
http://h10032.www1.hp.com/ctg/Manual/c03591281.pdf
Search the HP part number through HP part surfer website or through online store like eBay or Amazon.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Where in Paris can I take laptop to replace azerty keyboard with qwerty one?

The model laptop I have is X61.

Hi , Welcome to the HP Forums!
It is a terrific place to find answers and tips!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide.Learn How to Post and More I grasp you would like to replace the keyboard and would like the part number and where to purchase one. Here is a link to the HP Pavilion 17 Notebook PC HP Pavilion 15 Notebook PC Maintenance and Service Guide . Please note chapter 3, page 20, item 2 for the replacement keyboard part numbers. You stated you were having a difficulty locating where to purchase the part. Here is a link to HP Notebook PCs - Ordering HP Certified Replacement Parts for your convenience. You can also try a Google search with the part number for other vendors that may have one. To say thanks for replying please click the thumbs up icon below. If this has addressed your query please choose solution provided to help other people locate this information. Best of Luck!

Replace HP-DV6t keyboard with a backlit one ( like the HDX-16t's one)

I had my core i7 hp dv6t for a couple weeks and I love every bit of it except for the keyboard ! I really like the backlit keyboard from HDX-16t and i think it fits my laptop ! Can someone help me with this ? And if it works, where can I buy that backlit keyboard ?
Thanks in advance

I agree ... backlit keyboard was much better. Did you ever find out if you can do this?? I would love to know if possible and how to go about doing it. Would replacing the keyboard void my warranty though?

Help: pb g4 15": change normal keyboard with backlit one

Hi,
I've got a pb g4 15" 1.33ghz with a normal keyboard (no backlit). I'd like to replace it with a backlit one. Do you know if it is possible? Ok, I don't care about the ALS; it is enough to drive backlit with f8 f10 keys. I understand the my pb has no ALS sensor.
Thanks for the help

Hi Roberto
Welcome to the Discussions.
Yes, it is possible to change the keyboard, go to www.pbfixit.com - where you'll be able to buy the keyboard as well.
I do not know how the F-keys will function - but someone in here should know...
Regards
Sofus

Is it possible to replace the wifi card with another one?

Hi
I have a t400 with intel 5100 wifi card and now I want to install mac os on my laptop.
problem is that mac os does not detect the 5100 series of wifi card and I want to know whether it is possible to replace the current 5100 model with a older series?
Is there any certified service center in Uppsala/ Sweden to do that?
Thanks,
Solved!
Go to Solution.

Lenovo restricts the wireless cards to Lenovo branded units certified to work with the machine. This is done through a whitelist in the system BIOS. I recently disassembled the latest (version 3.14-1.06) T500/W500 BIOS and found the following whitelist table. This is raw big endian hex appended with what I found by searching the device ID's. Redundant entries are for varying vendor IDs.
86803B428680111000 Intel Corporation PRO/Wireless 5350 AGN [Echo Peak] Network Connection
86803D428680111200 Intel Corporation WiMAX/WiFi Link 5150
868036428680111000 Intel Corporation Ultimate N WiFi Link 5300
868037428680111200 Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
868037428680161200 Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
8C161C008C16350000 Atheros AR5007EG
EC107281EC1020E000 Realtek RTL8191SEvB (Yuck, Realtek! I'd hate to have one of these...)
86803D428680161200 8086:423D Intel Corporation WiMAX/WiFi Link 5150
8680840086801513 Intel Corporation Centrino Wireless-N 1000
Your T400 is from the same lineup and probably has the same list. Remember, you'll need to purchase a Lenovo branded unit.
Also look for a PM with additional information.

Replace old Hard Drive with 4TB ones on ix2-dl

I ordered the ix2-dl with two 4TB seagate hard disks (ST4000DM000) which is on the official support list. The hard drive came a couple days later than the ix2-dl. So I tried the ix2-dl with an old 640GB hard drive.
Now ix2-dl seems to like my old 640GB a lot. I could either use it alone or use it with one 4TB drive. It proves that ix2-dl does support the 4TB hard drive. It's just I couldn't use both 4TB together...
When I put two 4TB hard drive in, it ended up with lower light solid blue and upper light flashing red. The LenovoEMC Storage Manager shows the error message "Storage failed and some data loss may have occurred."
The web management screen (http://ix2-dl/manage/restart.html) shows the message "Device Software Restart In Progress. The device is starting up..." It will hang up there forever.
I cleaned the 4TB drive with diskpart in windows 7 before put into ix2-dl. Abd firmware is the latest 4.1.104.31360.
I saw jlamendola get this fixed with factory reset in another thread. But I couldn't really get to the factory reset page in the web management portal... The reset button on the back doesn't help. I even tried to do the factory reset with old 640GB drive and choose shutdown after reset. I could only get there with the old 640GB drive. Then I could switch to 4TB drive. But it still gave me the same error message and red flash light ...

Finally I solved the problem.
I cleaned another 1TB drive by using DISKPART as suggested in manual. I was able to access web management with this drive. Then I choose option of factory reset & Power Off.
After power OFF I replaced 1TB drive with new 3TB (already cleaned) drive. NAS accepted this time. I hope it will run smoothly now onwards. Though problem is solved I still didn't understood why it not worked with my new drive.
Future Improvement :
The software restrction of disabling the management page should be removed, so that in such case user should be able to access management page even if the disk is not present atleast for ix2-dl which has the firmware on device itself & not on hard drive.
Nilesh

How can I replace my old Airport with new one and keep my network?

I want to replace my 5+ year old Airport Extreme (runs 802g)
Would appreciate advice on how I can set up the new Airport Extreme and maintain my current network (my printer, Apple Tv etc are all signed into my network, would like to keep my network.
Is there a way to transfer settings from the older Airport Express to the new one?

Sorry for confusion; I have a 5 year old Extreme, want to install a new Extreme
Have an older Express as a range extender ad I have a new Exrpress I would set up likewise
Cable modem connnected to the Extreme via ethernet cable
Computers and printer are wirelessly connected to the network

Replacing damaged original drive with new one.

Hopefully I've chosen the correct boad... Our Pavillion dv6-2173cl hangs after showing the: wallpaper with the Taskbar fame and the Start button, Hp logo button and Date/Time. The cursor shows with the blue'busy' ring for several minutes then the whole thing 'freezes' necessitating the use of the power button on the case to shutdown. This also happens in Safe Mode. Hp Daignostics returned an error code of 9077j2-50e656-xd0021(7? sorry wrote it in a bit of a hurry, lol)-6ou103 for the drive test. We can still get to the disk as a 'slaved' external drive so personal info,settings are available. Since replacement drive is practically a given, I was wondering about just making the new disk a 'plain' W7disc. So my questin is "Are the HP programs necessary? Or are they just 'Space Takers"? I suspect an Overheating problem as the original drivr case has heat discoloration... Probable cause of disk damage... Right? All we need is a working drive till finances allow purchasing a new computer. Probably Feb. or so.
This question was solved.
View Solution.

That has always worked, I have never had it fail.
The only thing that I can suggest is to make sure that the key is correct.
The entire drive has to be deleted to create unallocated space on the entire drive. Just formatting it is not enough. After you create unallocated space let the Windows disc format it automatically, don't do it yourself.
Here is a tutorial that describes what I am talking about.
http://pcsupport.about.com/od/operatingsystems/ss/windows-7-clean-install-part-1.htm
A place to download the ISO of most version of W7, if you need it.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/

[SOLVED] repo-add replaces newer version package with old ones

Say I have two versions of nspr.
$ ls -1 nspr*.pkg.tar.xz
nspr-4.10-2-x86_64.pkg.tar.xz
nspr-4.9.6-1-x86_64.pkg.tar.xz
When I run repo-add on both of them, version 4.9.6 will be the one remaining in the database.
$ repo-add custom.db.tar.gz nspr*.pkg.tar.xz
==> Extracting database to a temporary location...
==> Adding package 'nspr-4.10-2-x86_64.pkg.tar.xz'
-> Computing checksums...
-> Removing existing entry 'nspr-4.9.6-1'...
-> Creating 'desc' db entry...
-> Creating 'depends' db entry...
==> Adding package 'nspr-4.9.6-1-x86_64.pkg.tar.xz'
-> Computing checksums...
-> Removing existing entry 'nspr-4.10-2'...
-> Creating 'desc' db entry...
-> Creating 'depends' db entry...
==> Creating updated database file 'custom.db.tar.gz'
I think here the natural order should be used, something like
$ repo-add custom.db.tar.gz $(ls -v nspr*.pkg.tar.xz)
as this is the expected behaviour from most users.
Last edited by luran (2013-10-07 23:43:21)

karol wrote:When only one version of a package will ever be present in the db, why try adding more? Just pass the version you want. You can use 'ls -v' if you prefer, but I think it's the shell's interpretation of the wildcard and not repo-add to blame.
Thanks for your reply. Now I agree repo-add should just process the files according to the order given by the shell.
To anwser your question, I need to make a local repository regularly to be shared with my other machine, because I have a very limited Internet quota and the sharing roughly halves the downloads. Usally I just use the wildcard for all the packages in the cache, and it works fine as long as the package version does not jump to 10+ like the above example. 'ls -v' will do the job for me. Cleaning the old packages could be another option, but occasionally I need to revert some package back to an old version.

Replacing w530 US keyboard with UK one

Similar Messages

Maybe you are looking for