Replacing XI with other technology

Hi,
I am exposer to XI. I need to know Where exactly use XI and what kind of projects we will expect in XI. Is there any Replacement or Compitator for XI In real time what kind of work its have.

XI is a middle ware which sits in between two or more different softwares/systems to exchange the data (in form of messages) in their respective format. XI helps them send/receive the data in their respective formats.
XI.. MQ series...Tibco ... etc are all data exchange architectures. So they are all same.
And these needs to be installed according to requirement of the existing SLD systems. So EAI tool (XI/TIBCO/MQ/WEBMETHODS) installation depends on existing SLD systems.
Some of the urls where you can get some info about the middleware products XI, Biztalk, Webmethods etc are:
Re: SAP XI versus BizTalk
Re: Need of XI !!!!
scorecarding  XI
Re: can i material to learn XI from basics
Re: XI role in interface!

Similar Messages

  • Please solve battery problem iOS 5.0.1 we are about to sell iPhone, iPad, iPod and replace them with others

    I have iPad, iPhone and iPod. I have updated all of them with iOS 5.0.1. After this wrong direction, all of them are facing a battery problem. Please solve solve solve it. This is a bad things from apple. We are about to stop trusting them. We have started comparing their products with other competitors. We are about to replace them with Samsung, Motorola, htc,...

    1000€ is 1342$
    But this is a  user Helping user forum Apple dont Read or Write here
    http://www.apple.com/feedback/
    This is here you contact Apple

  • Comparison of BCM with other technology

    My clent wish to compare /know details of other technology like BCM which will be
    Required to deliver"Screen Pops" to  CRM interaction Center
    Many Thanks In advance ,
    Pravin

    Hi John ,
    Thanks for information ,
    My client has following  Requirement  :
    what is required to
    deliver "Screen Pops" to our
    CRM interaction Center. One options is to use the SAP BCM (Business Communication Management) tool to build a VOIP infrastructure in the call center for integration.
    What we are looking for is other alternatives that will either work with our current technology or provide a **Low cost solution for nearly 50 customer .
    Current CRM Envoirnment : CRM 5.0
    Thanks in advance
    Pravin
    Edited by: pravin wipro on Jan 31, 2011 11:03 AM

  • My iPhone 5 synced with another computer and everything on my phone is removed, replacing it with other pictures and messages. how do i get my pictures and contacts back?

    My New iphone 5 was synced on my sisters computer and now when i want to use it all of my things are gone, including my pictures and contacts. they have all been replaced with her contacts and pictures. how do i get my things back? i have tried syncing with my computer again but since it was new and i hadnt synced it at all, there is no backup on my computer.
    Please Help,
    Thank you

    Sonali16 wrote:
    since it was new and i hadnt synced it at all, there is no backup on my computer.
    Then anything you had on the phone is gone.
    Settings>General>Resets>Erase All Content and Settings.
    Set it up as a new device again.

  • Aperture replaces images with other images that have the same image number

    Help! Aperture has started replacing images in recent projects with older images from elsewhere on my hard drive that have the same image number. Obviously I need a better numbering system, but can someone help me figure out why this is happening? I store master files on an external drive and the "replacement" files seem to be coming from identically named images on my local HD or in iPhoto.

    I started renaming all of my images when I import them. I'm using referenced images to an external drive, although I still have a bunch of older images stored in the Aperture library under my old numbering system (which was basically whatever image number the camera generated)....need to move them all to the external drive but haven't had time.
    So here's the latest problem: Today, Aperture started replacing images in albums (referenced images with unique file names under my new system) with old images even though the file names weren't even remotely close. It also replaced the images with the preview for the old image (230 pixels wide). "Show master" showed me the preview for the old image, not the correct image.
    I tried forcing an update to the preview, but it had no effect. The real masters are intact on the external drive, but this is really scaring me. It happens out of the blue, right in front of me...I watch as my images appear to be replaced with random old images in Aperture. It appears to have nothing to do with file names, as I'm now using totally unique file names.

  • How do I delet photos from my new iPad 3 and replace with others?

    How do I delet photos from my new iPad 3 and replace them with others?  The current photos were loaded from my computer when I connected the new iPad 3 to it, but they are not the ones I want.

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • Satellite C850 - boot from DVD issue - want to replace Win8 with Win7U

    Got a new C850-1JZ yesterday and am trying to replace pre-installed Win 8 with Windows 7. I did create the recovery media (3 DVDs).
    The laptop is driving me "insane" as it seems to block any attempt to boot anything else other than Win8 on the preinstalled hdd.
    1.) Inserted Win 7 Ultimate DVD and tried to boot, would not boot from disk.
    2.) Loaded advanced boot menu and tried to boot from ODD, would not boot from disk it. (Options are LAN, USB, HDD, and ODD (assuming this is optical disk drive)
    3.) Changed regular bios settings boot priority to boot from ODD first, then HDD, would not boot from disk.
    4.) Learned there is a "security boot protection" mechanism enabled by default in the bios. Turned it off. Machine starts loading from ODD and says "Windows is loading files" then hangs. This is a MS original Win7 Ultimate disk from the Microsoft store, no scratches. Makes no sense. We actually have 2 of them, so I tried the other, same result.
    5.) Thought screw that, let's just put the hard drive from the other computer (T61) in here then and do clean new setup another time. Replaced hdd with other sata hdd that has Win 7 ultimate installed and system configured. When booting from hdd, it says "No OS" found and reboots. When booting from ODD, it starts with windows is loading files again and then freezes.
    What kind of other extra protection/virus blocker/stupid setting am I missing here? This is puzzling me. Thanks.

    *Thanks as***, that solves the problem.*
    After 10 days Toshiba Support in Germany came back with the same answer.
    Basically it seems the UEFI Firmware has some reference to Win 8 or the original OS and key and boat loader that is checks, and you cannot load anything else until you disable it by:
    1) In the BIOS, disable "secure boot" mode
    2) In the BIOS advanced settings, switch from UEFI to CMS mode.
    Then you should be able to install anything as the new OS.
    Also, if you want to write down your product key / serial number , since it is not printed anywhere (e.g. no sticker on the bottom of the laptop) [Belarc Advisor - Free Personal PC Audit|http://belarc.com/free_download.html] is a good tool to retrieve this from the registry and write it down.
    As far as I know it's "glued" to this particular hardware, so not portable, but it might be a good idea to write it down in case you lose the system recovery disk but would want to re-install it with the original serial number.

  • Replacing bash with dash or zsh as default shell

    Now that initscripts are no longer default init system for Arch, it should be possible (if initscripts removed from system) to remove bash and replace it with other shell, right? On my system I have this:
    :: autoconf: requires bash
    :: automake: requires bash
    :: ca-certificates: requires bash
    :: cpupower: requires bash
    :: dcron: requires bash
    :: enca: requires bash
    :: fftw: requires bash
    :: filesystem: requires bash
    :: gpm: requires bash
    :: gsl: requires bash
    :: gzip: requires bash
    :: iptables: requires bash
    :: libksba: requires bash
    :: m4: requires bash
    :: man-db: requires bash
    :: mkinitcpio: requires bash
    :: p7zip-light: requires bash
    :: pacman: requires bash
    :: pkgstats: requires bash
    :: pm-utils: requires bash
    :: shadow: requires bash
    :: smartmontools: requires bash
    :: systemd: requires bash
    :: unzip: requires bash
    (Note: I've removed packets requiring sh.)
    Here's a complete list of packets depending on bash (110):
    abcde
    abs
    acpid
    antiword
    arch-backup
    archboot
    arch-install-scripts
    arch-wiki-lite
    audio-convert
    aurphan
    autoconf
    autojump
    automake
    bashburn
    bash-completion
    bashdb
    bashrun
    bwidget
    ca-certificates
    cl
    cpupower
    cronie
    dcron
    dhclient
    dkms
    drbd
    dvdrtools
    ecl
    enca
    fftw
    filesystem
    foomatic-db-engine
    fssos-nsvs
    geos
    gimp-gap
    gpm
    groovy
    gsl
    gzip
    hdparm (optional)
    ifplugd
    incron
    initscripts
    inputattach
    iptables
    jython
    kim4
    laptop-mode-tools
    libksba
    lksctp-tools
    lrzip
    lvm2
    lvm2 (testing)
    lxc
    m4
    man-db
    mathomatic (optional)
    mfs-chunkserver
    mfs-client
    minicom
    mkinitcpio
    multipath-tools
    nanoblogger
    noip
    ode
    oidentd
    opencv-samples
    openlierox (optional)
    openslp
    ozerocdoff
    p7zip
    pacman
    pacmatic
    pax-utils
    pkgstats
    pkgtools
    pmount
    pm-utils
    polipo
    ponysay
    preload
    quilt
    ratpoison
    rblcheck
    redis
    rkhunter
    rpcbind
    rpmextract
    sane
    sdcc
    shadow
    smartmontools
    source-highlight
    speedtouch
    systemd
    tablelist
    taglib-rcc
    ted
    tor
    translate-toolkit
    txt2man
    unzip
    uptimed
    vde2
    vnstat
    wdm
    wings3d
    wireshark-cli
    xbase
    xdm-archlinux
    Do these packages (except initscripts) really need bash? Debian uses dash as its default shell, I think Arch at least need to offer a possibility for using shells other than bash as default.
    Any thoughts?

    Demon wrote:Why not? I'm just exploring the possibilities.
    zsh is not completely backwards-compatible with bash (not that bash is "backwards" in any real way).  There's always a chance that, without the bash interpreter installed, some utilities written in bash won't work properly.  Also, sh in Arch is distributed in the bash package, so uninstalling it will pull those packages with it.
    Demon wrote:But then packages not needing bash (autoconf, automake, gzip, unzip) should list only sh as dependency, not bash. Right?
    Some of them already do:
    Arch Linux :: GLaDOS » pacman -Rp bash
    error: failed to prepare transaction (could not satisfy dependencies)
    :: autoconf: requires bash
    :: automake: requires bash
    :: bison: requires sh
    :: ca-certificates: requires bash
    :: cairo: requires sh
    :: cpupower: requires bash
    :: cronie: requires bash
    :: db: requires sh
    :: dhcpcd: requires sh
    :: dictd: requires sh
    :: diffutils: requires sh
    :: dmenu: requires sh
    :: e2fsprogs: requires sh
    :: fakeroot: requires sh
    :: filesystem: requires bash
    :: findutils: requires sh
    :: flex: requires sh
    :: freetype2: requires sh
    :: gawk: requires sh
    :: gdbm: requires sh
    :: gettext: requires sh
    :: gmp: requires sh
    :: gpm: requires bash
    :: grep: requires sh
    :: gzip: requires bash
    :: icu: requires sh
    :: iptables: requires bash
    :: keyutils: requires sh
    :: laptop-mode-tools: requires bash
    :: libgpg-error: requires sh
    :: libksba: requires bash
    :: libpng: requires sh
    :: libtool: requires sh
    :: libusb-compat: requires sh
    :: m4: requires bash
    :: make: requires sh
    :: man-db: requires bash
    :: mkinitcpio: requires bash
    :: nss: requires sh
    :: pacman: requires bash
    :: perl: requires sh
    :: sane: requires bash
    :: sed: requires sh
    :: shadow: requires bash
    :: systemd: requires bash
    :: taglib: requires sh
    :: tar: requires sh
    :: unzip: requires bash
    :: which: requires sh
    :: xorg-mkfontdir: requires sh
    :: xz: requires sh

  • After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous peopl

    After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous people call and ask why I didn't reply to their texts...and I look, but have not received any new texts. YES, I have restarted phone. I have cleared data as well as cache on all apps. I have downloaded the vzw messaging app, which seems silly, since it happens with several different processes and apps, but all to no avail. I am missing texts from my employer, from my family. This did happen, but rarely, before this "soak test". It is now Kitkat version 19.6.3.obake_verizon.en.US. THIS is when I started having problems...like 50 times a day kind of problems! I have seen hundreds of posts all over the internet over the past 3 days. Does no one know how to fix this??? Shouldn't there be a way to revert phone to a pre-update state? and no, hard reset did NOT work!!!! I have been with verizon for well over 15 years, but I have not upgraded my lines and will not in July either. This is ridiculous. It's not like my games aren't working, it is my messaging and "android os"...my lifeline at work!

    kristinaf333,
    Oh no, I am sorry to hear your messages are not working since the software update. I greatlly appreciate doing all that troubleshooting to try and get the messaging application back in business. I know how much I rely on my messages so I can understand the urgency to get this resolved. Have you had a resolution ticket opened since you started experiencing issues with your messages? Does this happen with all contacts or just some? Please provide additional information to ensure we get to the bottom of this for you.
    KarenC_VZW
    Follow us on Twitter @VZWSupport

  • Can ActionList in MD form be replaced with other elements(buttons?)

    Hi,
    At Re: # of tab canvases dependant on the # of groups that come back from a query in the entry of April 18,2001
    I found the following answer to my question:
    "Sorry, this is not supported yet. You cannot hide ActionList and you cannot replace it with any other elements."
    Is this still true?
    If not, how can I replace ActionLists of both blocks in Master/Detail form with buttons Update, Insert, Delete?
    Thank you very much in advance.
    Galina.

    I'm not sure why you don't think an event structure won't work but if you're not comfortable doing that, you can simply remove your Booleans from the cluster and build them into an array. You're converting the cluster to an array and doing a search of the array to see which button is true so why not skip the initial cluster part. I think you could also skip some or all the writing to the cluster with a local variable if you used a different mechanical action for the buttons.

  • Replace specif character with other chracter before or after ','

    a:='(a,c,dklcm,c,npc,c)'
    (a,c,dklcm,c,npc,c) these is a string value i can't change within these
    how will i replace specific chracter like c with other character
    keeping in mind that 'c' will between ',' and ',' and
    at the end before ')'.If c is not present at the end then it will be
    kept intact.

    SQL> select '(''a'',null,''dklnullm'',null,''npnull'',null)' ORIGINAL_VALUE from dual;
    ORIGINAL_VALUE
    ('a',null,'dklnullm',null,'npnull',null)
    SQL> SELECT REPLACE(REPLACE(REPLACE(REPLACE(REPLACE('(''a'',null,''dklnullm'',null,''npnull'',null)',',null,','~'),'null)','^'),'null',''''''),'~',',null,'),'^','null)') REPLACED_VALUE FROM DUAL;
    REPLACED_VALUE
    ('a',null,'dkl''m',null,'np''',null)

  • Clicked buy book.  Says two photo boxes need photos but there are photos.     Tried replacing with other photos. No luck.  Help? in them.  I tried to replace with other photos

    Finished photo book. Clicked buy book.  It said two boxed needed photos although already filled.  Tried to replace with other photos no luck. Help!

    What iPhoto version and theme are you using? Do you have any full page photos in the book? If so make sure the layout is not this one for a one photo per page with a photo background:
    So check the layout for the pages to see if you have one that requires a photo for the page background.  The screenshot above is for iPhoto 9.
    OT

  • [SOLVED]Script to replace compiz with metacity and the other way round

    Hi. I would like You guys to help me. I don't want to use fusion-icon (many complex reasons I wouldn't like to state here, just please take it for granted) and I'd like to bind a key combination for a command which would let me replace compiz with metacity and the other way round. So I think I need a script.
    What I'd need:
    detect if compiz is running
    yes -> metacity --replace
    no -> compiz --loose-binding --replace
    Can You help?
    Last edited by warnec (2010-06-23 19:38:46)

    The scripts by mojlac024 replaces compiz by metacity when compiz is running, but when metacity is running it doesn't bring compiz back.
    How to incorporate that test:
    dbus-send --print-reply --type=method_call --dest=org.freedesktop.compiz /org/freedesktop/compiz/dbus/screen0 org.freedesktop.compiz.list | wc -l
    into the script?
    PS.:
    When compiz is running, it prints 1. But when compiz is not running, it prints:
    Error org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.compiz was not provided by any .service files
    0
    So a simple logical test of "is this 0 or not?" won't work, I'm afraid.
    Last edited by warnec (2010-06-23 17:01:44)

  • Replacing Window Title with other value

    Hi to everyone
    Can anyone tell me how can I replace the window title with other values...for example with active record...mean client name should appear instead of window title.
    Thanks in advance

    Here is the code I use from a simple form. You can see it handles three separate environments, Client/Server, Web separate frame, and Web inside browser window.
    I like to remove the "Oracle Forms Runtime" from the main window, only in Client/Server, you cannot remove the brackets. So you are left with - [ Your Title ]Here is the code. It can be put into either the Pre-Form or When-New-Form-Instance trigger. But note that once you do this, EVERY form must set its title, or the one you set last will show up on all your subsequent forms:
        DECLARE
          WINDOW_ID        WINDOW := FIND_WINDOW('WINDOW0');
          WTitle           Varchar2(100) := 'My Test Form';
        BEGIN
          Set_Window_Property(Window_Id,Window_State,Maximize);
          If Get_Application_Property(User_Interface) = 'WEB' then
            --Web forms:  set MDI title, erase W0 title.
            Set_Window_Property(Window_Id,Title,' ');
            Set_Window_Property(Forms_MDI_Window,Title,' ' || WTitle);
            --- Check if running SeparateFrame=False (form within browser)
            If get_window_property(forms_mdi_window,title) is null then
              --SeparateFrame=False:  running inside browser window.
              --Cannot set browser title; need to set Window0 title
              Set_Window_Property(Window_Id,Title,' ' || WTitle);
            end if;
          Else -- client/server forms
            Set_Window_Property(Forms_MDI_Window,Title,' ');
            Set_Window_Property(Window_Id,Title,' '||WTitle||' ');
          End if;
        END;

  • Hi, I bought an iPad and was so impressed by Safari that I replaced Chrome with it on my Windows XP Toshiba laptop and now when I use Safari the icons on the screen continue to flicker until I come out of Safari. Is there a cure other than using a Mac

    Hi, I bought an iPad and was so impressed by Safari that I replaced Chrome with it on my Windows XP Toshiba laptop and now when I use Safari the icons on the screen continue to flicker until I come out of Safari. Is there a cure other than using a Mac

    When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive.  It would be a few months old so it wouldn't have the complete library on it....any ideas?  I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

Maybe you are looking for