Replay DVRs can connect to Internet, but not each other through new AEBS

I have a new AEBS and have had a few problems with it. After experiencing a lot of signal dropping I rolled the firmware back to 7.2 and that seemed to fix those issues.
Unfortunately, I'm still having one major problem. I have two RePlay DVRs wired to the AEBS. They can both connect to the Internet. (I know this because the TV guides are continuing to update.) But they cannot talk to each other. They should recognize each other and I should be able to watch files on one machine with the other. I could do this with no problem with my previous router. Does anyone else have this problem?? Anyone have any ideas on what to do??

Can anyone give me a clue? Should I exchange the AEBS, or is there a setting I could tweak??

Similar Messages

  • WRT54G all computers connect to internet, but not each other

    ver 5 firmware v1.02.5 build 002, Jan. 9, 2008
    Here is my issue. I run a secure wireless network at my home, consisting of 1 desktop (wired) and 1 laptop (wireless) after setting up the network, and turning on file sharing, and sharing drives, the network works fine for a short while. All drives are visible in "My network places" but when I try to access them, I get the error " \\drive\folder not accessible you might not have permission to use this network resource. All computers can use the internet no problem, and appear to be able to see each other, but cannot access each other. The signal is excellent, and the internet is fine as well. Is there any help that you can give me? I am not sure what is happening. No settings are being changed, it just seems that the network connections just disappear. Also, under my network places, the remote drives show up as under the Internet section of the window. Thanks in advance for any help you may be.
    Sonny

    Have you checked all firewall settings?  Turn off all firewalls on all computers and try.

  • Two Users can connect to apleu3test02 but not each other

    Hello,
    I have been trying to connect to with my wife whom is on a road runner cable modem behind a belkin wireless router. I am on a comcast cable modem behind a linksys wrt54gv4 router, however it is flashed with an open source firmware. Both of us can connect to the various test users out there but we have intermitent issues connecting with each other. I am guessing that this could be partially due to our maximum uploads being about 345kbps. I have not setup any port forwarding, triggering, or ther router adjustments yet. I figured if I can connect to the apple test users it should not be a problem. I am working on trying to test without my router but comcast will not let me mac grab a dhcp address. Any advice would be greatly appreciated.
    Me = macbook pro 2ghz with 2gb ram 10.4.7
    Wife = 1.67 g4 ibook with 512 mb ram 10.4.7

    I'm having the exact same problem. My father and I were able to communicate for weeks with no issues and since updating to 10.4.7 we have a 90% failure rate with video chat. It worked once last night and once this morning otherwise its an error -8.
    Now until recently we have never port forwarded anything except VNC and I can't see how we could use this method with iChat when we have numerous users here at home.
    I think the most frustrating part is it works from time to time and I can find the reason why.

  • WRT54GS ... Can connect to Internet but not to my network

    I have three desktop computers wired to the router and a laptop that I connect using wireless. One of my computers went to the shop. Now, I can't get it to connect to the network, but I can access the Internet with a browser and with an FTP Client. The other computers still talk to each other fine. I reconfigured the problem desktop but no joy. Note that I cannot access the router at 192.168.1.1 from any computer. I unplugged the router for 30 seconds and replugged it... with no change. What's my next step? Thanks in advance for any help. New info. I can access the router by using Internet Explorer. And There is no light on the front panel indicating that the problem computer is connected ... even though I'm accessing the modem/Internet with it.
    Message Edited by KGP on 09-11-2008 11:31 PM

    Lower down the Ethernet Adapter card speed from Auto to 10 Half Duplex ...
    Also change the cable or the port in the routers back side ....
    See if light is present on one ....

  • MacBook can connect to Internet, but not iMac

    Using two Airport Expresses as a WDS network. Had to reset network. Now Network is back up. MacBook can see it just fine and connect to the internet. iMac see's it, but can't connect to internet. I also opened up Airport Utility on iMac and it can't see either airport express...
    Any idea's?

    Also, in network preferences, it shows Airport "Not Connected". But I can see my MacBook on the network.

  • PC can connect to internet but not time capsule

    We are having no trouble getting onto our internet or accessing the time capsule with our Mac. However, the PC we have can get onto the internet, but is unable to access the time capsule. We need to be able to backup information from both of our computers.
    Please help us!

    Did you install the Airport utility onto windows?  If not do so.. it should include bonjour which helps greatly. Make sure it does.
    TC and wireless names may prevent access to resources.. are your names Apple style with that wonderful apostrophe.. illegal in the windows world?? Spaces in names also not legal.
    Change all names to SMB type.. short .. no spaces.. straight alphanumeric.
    Do you have permissions issues.. ??
    Have you opened file sharing and turned on the guest account.. read and write access.
    Do you have the right workgroup..?
    Please put in WORKGROUP.. assuming that is the workgroup.
    If you still have issues.. are you using homegroup in windows.. well stop it.
    If you still have issues .. are you connecting correctly using proper URL in windows explorer, ie \\TCname or \\TCIPaddress (obviously replacing with actual name or actual IP)
    If you still have issues.. ping the TC by name and IP and turn off all firewalls.
    Do each in turn.. even step 1 might be enough.

  • XP machines wired to WRT310N see internet but not each other

    Machines running XP SP2 with Linksys EG1032 network adapters are wired to Linksys WRT310N wireless router. The desktop machines connect internet w/o problem but don't see each other.Several attempts to set up network failed. I have very little experience with networks and am reluctant to make changes for fear of losing internet
    Ran diagnostic app and got the following:
    SiSoftware Sandra
    WinSock Library
    Version : 2.02
    Description : WinSock 2.0
    Status : Running
    Host
    Name : LEFT (name of the machine from which the app was run)
    Domain : hsd1.ca.comcast.net.
    IP Gateway/Forwarder : No
    DNS Service Enabled : No
    ARP Proxy Enabled : No
    IP TLL Value : 128
    IrDA Support : Yes
    Network Adapter
    Model : MS TCP Loopback interface
    Type : Loopback
    Speed : 10Mbps
    Packet MTU : 1.48kB
    Operational : Yes
    Network Adapter
    Model : Linksys EG1032 v3 Instant Gigabit Desktop Network Adapter Driver - Packet Scheduler Miniport
    Type : Ethernet
    Speed : 1Gbps
    Packet MTU : 1.46kB
    MAC Address : 00:1A:70:14:B3:6D
    IP Address 1 : 192.168.1.100
    IP Address 1 Subnet Mask : 255.255.255.0
    IP Gateway/Forwarder : 192.168.1.1
    DHCP Enabled : Yes
    DHCP Server : 192.168.1.1
    WINS Enabled : No
    DNS Server 1 : 68.87.76.178
    DNS Server 2 : 68.87.78.130
    DNS Server 3 : 68.87.69.146
    Auto Configuration Enabled : Yes
    Auto Configuration Engaged : No
    Operational : Yes
    Any help would be appreciated.
    Message Edited by chuckf on 08-17-2008 09:14 AM

    Have you checked all firewall settings?  Turn off all firewalls on all computers and try.

  • Can connect to Internet, but not router.

    I know, this is the opposite problem from what most people have. I am trying to connect through a WRT54G v.6 to the ethernet port in the wall (I don't know what the building is hooked up to, we just have ethernet ports next to our cable jacks).
    If I run an ethernet cable from the wall to the 10/100 port of laptop, I connect to the Internet just fine.
    If I run the ethernet cable to the WRT54G, and then connect to it using my wireless card and the default, unsecured "linksys" SSID, I connect to the Internet just fine, but I can't access the Linksys router at 192.168.1.1 (though I can successfully ping it), and if I try, though I do get the password window and put admin as the password, the Internet stops working completely.
    If I run an ethernet cable from the wall to the WRT54G and from the WRT54G to my computer, as you're supposed to and as I did when trying to set it up this morning, neither the included software nor Netset will give me access to the router. Trying 192.168.1.1 in the browser brings up the password window, but no amount of resetting the router to its factory defaults will give access.
    So there's my long story. I am, in fact, writing this via an unsecured, wireless connection to the default SSID. But if I dare try to access 192.168.1.1, I'll have to unplug the router and start again. What the heck is going on?

    download the tftp utility from ftp.linksys.com/pub/network and upgrade the firmware

  • Hi i use the hp lap in connecting for internet but not open the bro

    hi 
      i have some problam in my laptop in connecting for internet but not open for broswer and not update for software  tell the solution

    Hi @jerry3 ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Notebook and not getting to the Internet. First try just to reset the router. Unplug from the power wait a few moments and plug back in.
    Can get to safe mode with command prompt? F11 upon startup choose safe mode with Networking.
    Can you get to the Internet in safe mode?
    Please note remove any and all USB devices, and remove memory cards from the card reader slot. Disconnect all non-essential devices.
    You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
    I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
    Please let me know.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Can connect to appstore but not can't download songs or music albums

    can connect to appstore but not can't download songs or music albums in mp3.

    Sorry, but music tracks and other media contact are not available in Israel via an iTunes Store at this time. None of us here can say when Apple will be able to obtain the necessary licenses and feel it worthwhile to set up an iTunes Store for your country.
    Regards.

  • I have a problem to connect with FaceTime. I am using OS X 10.9.1 on a Mac PowerBook which is 4 weeks old. I can connect on iPhone but not from my computer.

    I have a problem to connect with FaceTime. I am using OS X 10.9.1 on a Mac PowerBook which is 4 weeks old. I can connect on iPhone but not from my computer. Does anyone have a similar problem???

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • Only Chrome can connect to internet, but the rest cannot.  I have wifi or lan connect to router.

    Only Chrome can connect to internet, but the rest cannot.  I have wifi or lan connect to router.
    All my connection to the internet had been stopped after I setup my new bought imac, and transferred data from my previous mac book.
    The connect test showed I have no connection to the internet.  But the interest is, I can connect to internet with Google Chrome, but in a quite slow connection speed.
    Check several times with the router and switches, DNS, wifi, lan settings etc.
    Give up after hours of trying.

    At the same time, another mac book using the same router can connect to the internet.  Even my iphone can also using wifi to connect to the internet.
    Chrome in the imac can, but Safari and the internet test cannot.

  • My imessage has just stopped working with one of my contacts, on both of our phones imessage still works with other contacts. Why can we imessage others but not each other?

    My imessage has just stopped working with one of my contacts, on both of our phones imessage still works with other contacts. Why can we imessage others but not each other?

    Yes... to no avail

  • Can connect to network but not internet. Please Help!!!!!!!!!

      I have a Thinkpad T-60p and have encountered a serious problem; I am unable to connect to the internet. The Thinkpad will recognize and connect to wireless networks but when I go to actually open a webpage it does not open. I spent hours troubleshooting the problem to no avail. My other laptop connects to the internet fine, so I do not think it is an issue with my router or modem. I also went to my neighbors and I was unable to connect to the internet even though I could connect to his network; once again my second computer does not have a problem. I tried what I could in the Thinkvantage wireless software but I am not that familiar with it. When I use the test connection option it just reads, “unable to connect to internet” but I have a strong signal to my network. I then tried a wired connection directly to my cable modem and my neighbors; once again it showed that I have a connection, but still will not connect to the internet. I tried disabling my Firewall and Virus software and still could not connect. I have shutdown, unplugged and reset everything. I still receive the same results. I am not sure what has happened, I have not installed any new software or hardware recently. The computer has been working great up until this morning. I ran my virus software and a free online scan as well, nothing had been detected. I called tech support and they said it was a software issue to either pay $100 for help or post in the forum. The only other option I can think of is a complete systems restore, which I am trying to avoid. Anyone have any suggestions?  
    Please Help,
    P.

    ConnectDon wrote:
    Perhaps the domain names are not resolving properly.  Instead of http://lenovo.com, try http://64.26.254.19, which is the numerical address for lenovo.com.  If you see the Lenovo home page, it will point us in the right direction.
    Don
         I will try that when I get home from work, thank you for the advice. However,I did notice that when it attempts to connect it shows the IP Address in the IE window bottom left corner. In the past it would always read connecting to "website name" but since the problem started it shows the IP address instead of the actual name.

  • Can connect to skype but not internet, running snow leopard

    Moved to new house; was able to connect to internet with firefox first day; after that can get on Skype but not internet. Is it my computer or the wireless router in the house? what should I do?

    This is all I could find on the topic, but it doesn't resolve my issue:
    http://docs.info.apple.com/article.html?artnum=106798
    http://docs.info.apple.com/article.html?artnum=106797

Maybe you are looking for

  • Site id flag in tool bar. How do I get this?

    How do I get the the add on that identifies where a site or domain is located. It shows a country flag in the toolbar? Thanks

  • Services missing in SharePoint Central Administration

    Hi, In SharePoint Central Administration -> Application Management -> Manage Service Application. I could see only the following services - Application Discovery and Load Balancer Service Application - Security Token Service Application - Usage and H

  • In which table is located the user e-mail adress in SU01 ?

    Hello, I'm desperatly tring to locate in which table I can find the e-mail adress of the user that appear in SU01, the filed is named SMTP_ADDR but is related to a structure... I have tried to locate tables containing this field with DD03L but withou

  • XSLT or JAXB

    Hi, I've written an application in which JAXB is applied to transform XML to/from Java object instances. This is all working fine. However, there is now a further requirement to transform the XML to match another schema for further processing, and bo

  • Windows Mobile 5.0 Flash 7 Install

    I am having trouble acknowleding T&C's and disclaimer whne installing Flash 7 on WM5 on Treo 700W. I can't find a way to accept or agree. Any advice? Is there a desktop version of Flash 7 that can be installed via ActiveSyc? THANKS!!