Replay video in Muse (some controls doesn't work)

Hello colleagues,
Can't understand what is happening. I put a video in the Animate and assign controls for buttons (for example, replay video from 0:00 sec). For stage and video autoplay function are disabled.
Then I export the oam-file and insert it into the Muse with a Scroll Effect "Edge Animate" (Autoplay) to play the video at a certain point. Video starts correctly, but some controls doesn'n work, for example, "replay video". Along with this function "Toggle video play/pause" works correcly.
Actually, I want to loop video playback but it doesn't work in the Muse (Loop function for a video).
Can anybody recommend a solution?
Thanks!

Hello Joe,
This is very interesting, but when I upload the project from Muse to my FTP-server, everything is working properly in all of browsers, all of controls and loop for the video clip. I found it by accident when I lost all hope. In other words, the problem is only when previewing the page in a browser (via the built-in local server). Maybe this is a question for the team Muse? Anyway I can send it in PM.
Thanks for your reply,
Alexander

Similar Messages

  • I just downloaded ios 7 and when I'm recording video the camera screen goes black and doesn't record anything. Also in control centre music control doesn't work sometimes. It's been three days.

    I just downloaded ios 7 and when I'm recording video the camera screen goes black and doesn't record anything. Also in control centre music control doesn't work sometimes. It's been three days.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.      
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • My beats studio 2013 work fine on my ipad but the mic/ volume control doesn't work on my iphone 5

    My beats studio 2013 work fine on my ipad but the mic/ volume control doesn't work on my iphone 5. Can anyone help me?

    Thanks, daniel.early79!
    I have an iPhone5 bought in late Dec 2012.
    I've noticed on rare occassions that the volume down button some times would not respond.
    Starting yesterday, the volume down button would not respond more consistently.
    Sometimes a reset would fix it, sometimes a reset network would fix it, but the problem would come back.
    Came across this thread, and pressing gently on the upper right hand corner fixed it!
    I remember seeing some video on Youtube or iFixit that shows how to replace the power button. It appears that the volume buttons and the power buttons are tied in together on the same piece of connector. I supposed taking the iphone in and out of cases may have warped or twisted the connector inside the case ever so slightly that the sensor for the down volume button got shifted.
    The down volume button works now, after doing the trick you suggested. I'll wait and see if it comes back before taking it in for warranty repair.

  • With new os 5.1 for iPhone, the headphone controls doesn't work

    i've noticed that with new release of os 5.1, the headphone controls doesn't work. no volumes controls neither the central control.
    with ipad the same headphones works well.

    I'm having the same issue, but without having upgraded to iOS 6.1 - it just started out of the blue last night.
    Timeline:
    It suddenly heated up, I turned it off. Battery at 87%
    After maybe 45 minutes, I turned it on again. Battery at 45%. It would not charge at this point.
    I tried MANY things, including turning off WiFi, mobile data, location services, Gmail sync (though not Exchange sync, which had given no problems before. I'd recently changed some Gmail settings, so I reverted them).
    I tried to restore, but my crappy internet was unable to download the iOS 6.1 file.
    I looked it up on the internet and performed a hard reset, after which the phone began to charge, to my delight.
    I charged it to nearly full (92%) then lay in bed using Twitter and iBooks for some time, after which battery was at 65%.
    After sleeping for around 7 hours, the battery lies dead. Attempts to charge it (both from the wall adapter, which is a standard India 220V charger, and from my laptop) are making it flash the Apple logo for around 4 seconds before the screen turns off; this repeats ad infinitum.
    What do? The nearest Apple Store is three hours away and I have exams on; can't get away before Saturday at the earliest, so I'd like to have some use out of the phone in the near future.

  • Earbuds remote control doesn't work anymore!

    Hi!
    I've had an iPhone 4 since September 2010, and I've always used the earbuds that came with him.They used to work great until this week.
    Now, it's buillt-in remote control doesn't work anymore.By that I mean I can not skip, pause or even use voice control through the earbuds.
    And this probably isn't an iPhone problem, because I tested these earbuds in my iPad 2 and the remote control still doesn't work.
    I noticed that the rubber that used to cover the cable itself is coming off, especially near the remote control area.
    Is there a fix for these unresponsive controls?
    Or what Apple email I should reach in order to ask them about this issue?
    Thanks!
    My iPhone 4 is running iOS 5.0 and so is my iPad 2.

    Is your phone locked in portrait orientation? I've found that for some reason my controls will not work when my portrait orientation is locked.
    Try double-clicking the main button, and then sliding your thumb right. You should get some controls at the bottom of your screen, and the button on the far left is the Portrait Lock button. Try unlocking your phone, and see if your earbuds will then work.
    Hope that might help!
    -Dave

  • When I insert headphones and then I remove them, volume control doesn't works.

    When I insert headphones and then I remove them, volume control doesn't work more, and I have to operate on system preferences=>sound=>output volume. Whay does it happens and  how can I fix it?

        Yes, I am using 09 with out issues.  Just have to remember to use "open with 09" or open pages 09 first then my document.
      I create some amazing cards and posters with 09 that when on a PC I would have to use both Word and Publisher to create.  Flipping back and forth. 
      Apple if you're  listening please, give us back our layout options and even add a few more design options like beveled and 3D text.

  • I upgraded my iMac to 10.9.4.  Now the feature where you can go to 4 diff. screens (Command+Control) doesn't work.  How do I fix this?

    I upgraded my iMac to 10.9.4.  Now the feature where you can go to 4 diff. screens (Command+Control) doesn't work. 
    How do I fix this?

    Do you have that problem when running in the Firefox SafeMode? <br />
    [http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this: <br />
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • After las update some menus doesn't work properly. Ther is non possibility to use mouse. Why?

    After las update (9.2.1) some menus doesn't work properly. Ther is non possibility to use mouse. Why?

    Operating System?

  • I have ipad with IOS 7,  Some apps doesn' t work, safari not open some web site. What can I do?

    I have ipad with IOS 7,  Some apps doesn' t work, safari not open some web site. What can I do?

    Try this and see if it helps.
    Settings>Safari>Clear cookies and data.
    Now close Safari completely. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then "swipe up" or "drag up" on the app preview thumbnail to close it.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • SoftKeyboardType property of StageText : some values doesn't work on Android

    Hello,
    on my Galaxy Nexus Android 4.2.2, when I use the softKeyboardType property of StageText :
    "number" and "email" work,
    but "punctuation", "url", and "contact" doesn't work.
    http://help.adobe.com/en_US/FlashPlatform/beta/reference/actionscript/3/flash/text/StageTe xt.html#softKeyboardType
    Why some values doesn't work ?
    I need the constant "punctuation", please help.
    Thanks

    Hi,
    Thank you for your bug report. We are able to reproduce the issue. Could you please open a new bug report on this over at bugbase.adobe.com?  Once the bug has been added would you mind posting back with the URL so that others affected can add their votes and comments?
    Thanks once again for reporting this.
    -Nimit

  • During video recording the auto focus doesn't work automatically!i must have a tap on the display for to use the autofocus! Ihave an iphone 4s

    during video recording the auto focus doesn't work automatically!i must have a tap on the display for to use the autofocus! Ihave an iphone 4s

    I know.  Same issue here.  When I'm not recording but have the video camera on, the autofocus works fine.  As soon as I tap the record button and recording starts, the focus is locked until I tap on the screen to focus.  I haven't used the camera all that much because of this problem.

  • Volume control doesn´t work with iphone 3gs

    Hi, the volume control doesn´t work with my ihpone 3gs, i´m using the apple headset, any suggestions???

    ´Till the moment it is, i just recently received a notification with a software update, but i tried with another 3gs with the same characteristics and it worked.

  • Volume control doesn't work

    Had 2 kernel panics recently, and been noticing a string of strange issues, one of which is that the Volume control doesn't work, or specifically, it doesn't affect many applications.
    For example, when using Chrome, if I want to use the volume control to icrease or decrease volume on a movie (YouTube etc), the hardware controller keys (F10 - F12) do not have any affect on volume, but I am able to change it using the software interface of the current player.
    Something has gone haywire with my laptop... disks are unmounting as well (USB & FireWire 800), major settings seem to have returned to default (trackpad and other), and installed software seems to have disappeared (eg, Paragon NTFS). I am concerned!
    Help, please!
    I am still using 10.6.8.
    Peter

    I am having the exact same problem. I just did a complete re-install of max os x and did all of the updates..my hard drive had crashed so i had to replace it. lot's of fun.. and after the last upgrade i can't use my sound at all.. the sound shows that it's all the way up but it has the "no Smoking" sign as well..
    i have tried to restart.. change options and whatever else i could .. i did notice that when i enable the option to show the sound icon on the main bar that there is just a blank spot where it should be.. and i can't change it form there either because it just doesn't show..
    any one seen this before.. ?
    all my other Mac's work fine..
    please help..

  • Volume control doesn't work on AOL radio

    The Volume control doesn't work on AOL radio. I does work in iTunes and with music. Is there a way to reset AOL radio?

    To be honest Im not quite sure why this volume indicator is not visible on the screen but in my opinion its really not a serious issue
    I mean the sound is working properly and this is only a indicator which shows you a current sound level
    However, I think its something wrong with an process which cannot be started or a registry issue

  • Volume control doesn't work with headphones plugged in

    When I connect headphones the volume control doesn't work correctly. It should play only through the headphones, but it doesn't. In fact the volume control will bounce back and forth between operating correctly and not working correctly ... And will eventually stop the music. Frustrating!

    ´Till the moment it is, i just recently received a notification with a software update, but i tried with another 3gs with the same characteristics and it worked.

Maybe you are looking for

  • [SOLVED] How to add modules to build with the kernel?

    Hello i´m trying to learn how to build my own custom kernel and doing it the arch way https://wiki.archlinux.org/index.php/Ke … raditional. But unfortunately dm-crypt was not included in the kernel so it all failed. svart_alg% sudo mkinitcpio -k 3.15

  • ITunes error trying to update apps

    Just updated iTunes. Get error 3024 trying to update my apps What gives. Also clicking the green button doesn't fit the window to my screen

  • Bridge CS5 and indexing on a Server

    Maybe I'm way of base here, but I've used Bridge CS3 to successfully index files on a network server and it remembers the indexing (a library of stock photography) But now trying this with Bridge CS5 and each time I have a search (file or keyword) it

  • 10g Can't use component palette in code editor

    In 903 I used to use the Code Snippets page on the component palette to insert common bits of code. In 10g, the component palette remains inactive if I have a jsp or java code editor open. If I switch to the visual tab, the palette activates, but dea

  • Setting the height of detail section with RAS SDK

    Hi, all, is it possible to locate a section (CrystalDecisions.ReportAppServer.ReportDefModel.Section) in a reportk you and set its maximum height? When I find a detail section in question like so section = reportClientDocument.ReportDefController.Rep